Develop Bugs

[MOD][XPOSED] NFC Icon Remover [HTC One/One X]

NFC Icon Remover
**You can now get NFC Icon Remover on the Xposed Framework's Download tab. In this way, if I update it, you will get update notice via Xposed framework. However, I will still post the most updated file here once available! **
I just wrote this little App for my own use to remove the ugly (IMHO) NFC icon. With the power of XPosed framework, there are no need to modify the NFC.apk and the Icon is complete GONE.
For those you may not know, the NFC icon appears on HTC One and One X (after Android 2.2 update). This take out the precious space of status bar while looking really ugly.
Please be noted to use this mod, you need XPosed framework by rovo89. You could get the Framework at http://forum.xda-developers.com/showthread.php?t=1574401
This App has no icon of it's own. Just side load attached NFCIconRemover.apk and enable it in the Xposed Installer then reboot. You will notice the NFC icon will be gone after reboot.
Since this is my first Android app (Actually my last time writing any SW is 20 years ago! Haha!) so feel free to risk your phone by installing this. I am NOT responsible if it anything went wrong after install this mod.
I had only test this on my HTC One X (international version) with MaximusHD 21.1.0 (a very good custom ROM). Please feel free to feedback on this thread and I will try to resolve as much as I could.
If you find this useful, it would be appreciated to push the "Thank" button!
Great thanks go to rovo89 for this fabulous framework!!!

When I try to install from within xposed framework, I get the following error message:
Package name is incorrect (downloaded: com.lssong.nfciconremover, expected: NFCIconRemover)
Any idea?
edit: Just noticed that manual installation of the .apk works. So more or less a non-issue, but maybe worth solving anyway.

BigBlue007 said:
When I try to install from within xposed framework, I get the following error message:
Package name is incorrect (downloaded: com.lssong.nfciconremover, expected: NFCIconRemover)
Any idea?
edit: Just noticed that manual installation of the .apk works. So more or less a non-issue, but maybe worth solving anyway.
Click to expand...
Click to collapse
Yeah, I get the same thing happening.

As said above, manual installation of the .apk worked fine. The module is now listed in xposed framework, and I could enable it. Unfortunately it's not removing the NFC icon on my device (LG G2).

Deleted due to double post

BigBlue007 said:
As said above, manual installation of the .apk worked fine. The module is now listed in xposed framework, and I could enable it. Unfortunately it's not removing the NFC icon on my device (LG G2).
Click to expand...
Click to collapse
Thanks for trying out! I just fixed the download installation issue in the Xposed framework. It should work now... *My Bad*...
As for LG G2 not working... Since I don't have a LG, could you please help by checking if the LG G2's NFC service package name is com.android.nfc? If not, what is the name?
Thanks!

Hi. How can i have the nfc back again? Thanks

Installed, works great, thanks!

rharta said:
Hi. How can i have the nfc back again? Thanks
Click to expand...
Click to collapse
If you want the NFC icon back, just disable this module in XPosed frameworks and reboot. The NFC icon will be back. (uninstalling the module then reboot will do the same trick)

SephirothXIIIX said:
Do you know if this is supposed to work with the 4.3 update? I've installed the Xposed Framework and enabled the module and rebooted, but I still have the annoying icon.
Click to expand...
Click to collapse
Since my One X doesn't have 4.3 yet, so I cannot test myself. However, as long as Xposed framework works and the NFC process is named "com.android.nfc" then it *should* work.
Feel free to install it and post your result here! It won't hurt anything and if it doesn't work, just remove it.
If it doesn't work, could you please let me know your NFC's process name so I could add it.
Thanks!

Sony Xperia Z
Process name is
com.sonymobile.nfc
Or at least it is on my rooted stock T-Mobile version. Model #C6606. Running 4.1.2 (I know, ridiculous).
Thanks for the mod. I hate that icon!

lssong99 said:
Thanks for trying out! I just fixed the download installation issue in the Xposed framework. It should work now... *My Bad*...
As for LG G2 not working... Since I don't have a LG, could you please help by checking if the LG G2's NFC service package name is com.android.nfc? If not, what is the name?
Thanks!
Click to expand...
Click to collapse
LgNfc.apk

Ok, I will add both when I can get back to my PC with the source code next week!
Sent from my HTC One X using XDA Premium HD app

Palthron said:
LgNfc.apk
Click to expand...
Click to collapse
Sorry, LgNFC.apk is the name of the apk file... Can you try to get the "process name" which looks like com.android.nfc? (I guess LG's might look like com.lge.nfcaddon ...)
If you don't know how to get a process name, try to get Android Tuner free. In that app you can see all the process name!
From the information on XDA, it seems LG had their own implementation of NFC and lot of things are changed under-hook. I had look up into the BaskSamli people provide and pull the com.lge.nfcaddon. Not sure if it's correct and even if it's correct, will it work or not.
Anyway, you can try the attached apk and check yourself! If it works, I will post it on the XPosed framework's download page
Cheers!

probablymartin said:
Process name is
com.sonymobile.nfc
Or at least it is on my rooted stock T-Mobile version. Model #C6606. Running 4.1.2 (I know, ridiculous).
Thanks for the mod. I hate that icon!
Click to expand...
Click to collapse
I have added to hook also Sony's nfc but but sure if it will work or not. Could you please side load this apk and test for me? If it works, I will post it on the XPosed Framework's download page!
Thanks!

maybe try again?
That did not work on my Xperia. But I may have flubbed the service name. Perhaps try:
com.sonymobile.nfc.NfcServiceEx
Thanks!

probablymartin said:
That did not work on my Xperia. But I may have flubbed the service name. Perhaps try:
com.sonymobile.nfc.NfcServiceEx
Thanks!
Click to expand...
Click to collapse
OK. Modified accordingly. However, it seems Sony also modified their NFC service so no guarantee my simple way will work... Anyway please let me know if it works!

sigh
lssong99 said:
OK. Modified accordingly. However, it seems Sony also modified their NFC service so no guarantee my simple way will work... Anyway please let me know if it works!
Click to expand...
Click to collapse
Nope. No luck. I guess Sony doesn't want me to control me own phone experience. But there's nothing to unique about that, I guess. Thanks for your effort and prompt responses!

lssong99 said:
Sorry, LgNFC.apk is the name of the apk file... Can you try to get the "process name" which looks like com.android.nfc? (I guess LG's might look like com.lge.nfcaddon ...)
If you don't know how to get a process name, try to get Android Tuner free. In that app you can see all the process name!
From the information on XDA, it seems LG had their own implementation of NFC and lot of things are changed under-hook. I had look up into the BaskSamli people provide and pull the com.lge.nfcaddon. Not sure if it's correct and even if it's correct, will it work or not.
Anyway, you can try the attached apk and check yourself! If it works, I will post it on the XPosed framework's download page
Cheers!
Click to expand...
Click to collapse
lssong99 thank you, I tired this but unfortunately it didn't work on LG G2 801. There was a zip somewhere to flash in recovery, but I'd love to have an xposed module that took care of it.
I appreciate your hard work!

nathanskidmore said:
lssong99 thank you, I tired this but unfortunately it didn't work on LG G2 801. There was a zip somewhere to flash in recovery, but I'd love to have an xposed module that took care of it.
I appreciate your hard work!
Click to expand...
Click to collapse
Hi, apk did not work for me either. Would love to have the icon removed. Can I help in fixing it for G2? Please let me know how. Appreciate the hard work!

[WORKAROUND] Xposed bootloops in Sony Xperia family

Fix found and released:
http://forum.xda-developers.com/showthread.php?p=60454547
Downloads & instructions: http://forum.xda-developers.com/showthread.php?t=3034811
Discussion & Q&A:http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
I asked moderator to close this thread as issue was fixed by releasing new version of Xposed framework. Please send your further questions and post to respective thread.
Hi guys,
as you may have notice, number of users have problems with latest Alpha on whole family of 5.0.2 Lollipop devices. Installing Xposed on untouched Stock firmware leads into bootloops.
We have not been able to rule out specific root cause, however the bootloop condition is directly affected by number of APKs processed by at boot.
It have been found out that debloating the ROM removes the bootloop, however limit of installed and processed APKs is somewhere about 320.
Update of system app counts as two, as 2 APKs (one in /data and one in /system) are likely processed.
Later the cause was estimated to be too many open files while processing APKs. First successful workaround was made by modifying and recompiling kernel to allow 4096 open files (originally 1024). However this only works on unlocked bootloaders. Yesterday I published script and binary that modifies max number of open files for zygote process at boot to 4096.
Both above mentioned methods effectively remove the bootloop and users can use it with untouched Stock ROMs. The workaround is non-device specific, so should work on other devices too, where bootloops are caused by same problem.
I am letting you know to review your code and/or constellation to determine if there is possible bug in Xposed leaving too many handles open while parsing apks and whether this problem is specific to Sony devices... or is the problem somewhere else.
Original thread with credits to others and source code for fix: http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203

Wonder if this Workaround works for Samsung devices as well.........

Stupifier said:
Wonder if this Workaround works for Samsung devices as well.........
Click to expand...
Click to collapse
I need somebody to try, have no Samsung here. The thing is safe to try, it doesnt modify ROM or anything.

ondrejvaroscak said:
I need somebody to try, have no Samsung here. The thing is safe to try, it doesnt modify ROM or anything.
Click to expand...
Click to collapse
I'll try it over the weekend....don't have time currently. I quickly read over the thread about it. Seemed like there was a zip to Uninstall/Reverse everything done if things go wrong?

Stupifier said:
I'll try it over the weekend....don't have time currently. I quickly read over the thread about it. Seemed like there was a zip to Uninstall/Reverse everything done if things go wrong?
Click to expand...
Click to collapse
The mod is so stupid simple that it does not need uninstall zip. The uninstall zip removes whole Xposed framework.

Seems all the instructions reference a bunch of Sony-Specific items......I'm getting confused how I would even begin to try this on another device. I don't think I'd be a good person to try this, sorry.
I do hope some other, more capable person WILL try this out on a Samsung TouchWiz Lollipop device though. There are so many Samsung users who would love to use Xposed again.

Stupifier said:
Seems all the instructions reference a bunch of Sony-Specific items......I'm getting confused how I would even begin to try this on another device. I don't think I'd be a good person to try this, sorry.
I do hope some other, more capable person WILL try this out on a Samsung TouchWiz Lollipop device though. There are so many Samsung users who would love to use Xposed again.
Click to expand...
Click to collapse
Which Sony specific?
Sent from my D6603 using XDA Free mobile app

ondrejvaroscak said:
Which Sony specific?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
"Functional XZDualRecovery or other form of init.d support." -My ROM has init.d support...I have no idea if my Recovery does though....I have SafeStrap and also use FlashFire to flash things.
Also, from my understanding, the steps I would follow would be....
1. Flash xposed arm zip.
2. Flash sony fix zip.....do I need to reboot in between these two flashes. I'm assuming no?
3. What else do I need to do?

Stupifier said:
"Functional XZDualRecovery or other form of init.d support." -My ROM has init.d support...I have no idea if my Recovery does though....I have SafeStrap and also use FlashFire to flash things.
Also, from my understanding, the steps I would follow would be....
1. Flash xposed arm zip.
2. Flash sony fix zip.....do I need to reboot in between these two flashes. I'm assuming no?
3. What else do I need to do?
Click to expand...
Click to collapse
Flash first the fix then xposed. You need wipe dalvik and cache after xposed flash. The fix is general Linux thing do runs on all brands not only Sony.
Sent from my D6603 using XDA Free mobile app

ondrejvaroscak said:
Flash first the fix then xposed. You need wipe dalvik and cache after xposed flash. The fix is general Linux thing do runs on all brands not only Sony.
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
According to the instructions of @mionica the Sony fix should be flashed AFTER Xposed zip...... More confusion

Stupifier said:
According to the instructions of @mionica the Sony fix should be flashed AFTER Xposed zip...... More confusion
Click to expand...
Click to collapse
The order doesn't really matter; the reason I indicated a specific order was precisely so people wouldn't have an excuse to ask about the order

Alright, tried it.
Definitely did not work....Caused hard boot error. Have to re-do everything including root to get back.

Stupifier said:
According to the instructions of @mionica the Sony fix should be flashed AFTER Xposed zip...... More confusion
Click to expand...
Click to collapse
If you would understand how Android works and what the fix does, you would realize that it in fact DOES NOT MATTER if you flash it before or after.
For that you must redo everything I am sorry, but that´s a developer life While there is no way how this piece of code can cause hard boot error, I assume that the boot error is caused by Xposed itself. Simply this hack just allowed Xposed to initialize and failed during init... The question is whether you have correctly wiped Dalvik and cache after flashing Xposed... But I assume yes. To further isolate the problem, it would be useful to first flash the fix, reboot to see if it did not caued any problems and only then flash Xposed.
The other thing is that developer of Xposed WARNS on his thread, that Xposed is NOT working on current Samsung devices, hence I assume that this fix would not make any difference as there are some Samsung specific issues related to KNOX.

Rovo89 just post a new xposed framework (flashable zip) alpha 3, can someone confirm it fully works on Xperia z2 ou z3..

Konvict64 said:
Rovo89 just post a new xposed framework (flashable zip) alpha 3, can someone confirm it fully works on Xperia z2 ou z3..
Click to expand...
Click to collapse
Nope, suffers the same handle leak as previous version.
See here latest update http://forum.xda-developers.com/showthread.php?p=60268402

Thread to close
Fix found and released:
http://forum.xda-developers.com/showthread.php?p=60454547
Downloads & instructions: http://forum.xda-developers.com/show....php?t=3034811
Discussion & Q&A:http://forum.xda-developers.com/xpos...lipop-t3030118
I asked moderator to close this thread as issue was fixed by releasing new version of Xposed framework. Please send your further questions and post to respective thread.

@ondrejvaroscak
links not working.

starbase64 said:
@ondrejvaroscak
links not working.
Click to expand...
Click to collapse
just tested them all, working fine

Thread closed per OP request.

Nougat Dialer/Contacts

There are a lot of apks and zips which aren't working on Moto Z. This one IS working.
Just flash it with TWRP and set as default phone app.
Update: 10 December 2016
- Update Google Contacts (1.6.15) for 6.x/7.x ROMs
- Update Google Dialer (7.0.140755802) for 7.1
Download Links:
For Marshmallow 6.0/ Nougat 7.0
For Nougat 7.1

Manish54 said:
There are a lot of apks and zips which aren't working on Moto Z. This one IS working.
Just flash it with TWRP and set as default phone app.
Click to expand...
Click to collapse
Doesn't it works as simple apk too?

enetec said:
Doesn't it works as simple apk too?
Click to expand...
Click to collapse
I've tried installing all the versions from apkmirror, they all fail to install. (for me at least)
Have you tried installing it?

Manish54 said:
I've tried installing all the versions from apkmirror, they all fail to install. (for me at least)
Have you tried installing it?
Click to expand...
Click to collapse
Not yet. Just askin'...

enetec said:
Not yet. Just askin'...
Click to expand...
Click to collapse
Well this is the only working file I could find.

Manish54 said:
Well this is the only working file I could find.
Click to expand...
Click to collapse
Just tried... If you simply extract the two apk from the zip you can install them with no issues at all... (I prefer it from flashing...)
The Contact apk is the same as you can find on Play Store, while the Telephone apk is a (lot) newer version than that available on Play Store... Thanx a lot! :highfive:
EDIT: wrong! No problem with contacts, it can be downloaded and installed from Play Store too... BUT Telephone refused to install on Z while installed fine on another MM I use... I'll investigate more on this issue...
---------- Post added at 10:02 AM ---------- Previous post was at 09:03 AM ----------
enetec said:
EDIT: wrong! No problem with contacts, it can be downloaded and installed from Play Store too... BUT Telephone refused to install on Z while installed fine on another MM I use... I'll investigate more on this issue...
Click to expand...
Click to collapse
Ok, it's possible to install single apks BUT it's needed to install jar & permissions file (& reboot before...) so, for newbies is probably better to simple flash the zip (that is ok, I've cheched...)
Main difference is that flashing after the apps can't simply be uninstalled but become part of the system since they are put in priv-apps... (ok, they can be freezer or removed by a root file manager anyway...)
I'm using it anyway... small differencies for contacts, a lot more (and interesting...!) for dialer...

enetec said:
Just tried... If you simply extract the two apk from the zip you can install them with no issues at all... (I prefer it from flashing...)
The Contact apk is the same as you can find on Play Store, while the Telephone apk is a (lot) newer version than that available on Play Store... Thanx a lot! :highfive:
EDIT: wrong! No problem with contacts, it can be downloaded and installed from Play Store too... BUT Telephone refused to install on Z while installed fine on another MM I use... I'll investigate more on this issue...
---------- Post added at 10:02 AM ---------- Previous post was at 09:03 AM ----------
Ok, it's possible to install single apks BUT it's needed to install jar & permissions file (& reboot before...) so, for newbies is probably better to simple flash the zip (that is ok, I've cheched...)
Main difference is that flashing after the apps can't simply be uninstalled but become part of the system since they are put in priv-apps... (ok, they can be freezer or removed by a root file manager anyway...)
I'm using it anyway... small differencies for contacts, a lot more (and interesting...!) for dialer...
Click to expand...
Click to collapse
Yep the dialer refused to install Everytime and the new dialer is dope.
And the zip works fine to avoid all the hustle for newbies like me
Thanks for spending your time on it :fingers-crossed:

Manish54 said:
There are a lot of apks and zips which aren't working on Moto Z. This one IS working.
Just flash it with TWRP and set as default phone app.
Click to expand...
Click to collapse
How did you root your phone? Do you have a Verizon phone?

Moto.Matt said:
How did you root your phone? Do you have a Verizon phone?
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-z/how-to/moto-z-hacking-experiences-t3502409/page1
Nope. I have the Indian one.

Manish54 said:
http://forum.xda-developers.com/moto-z/how-to/moto-z-hacking-experiences-t3502409/page1
...
Click to expand...
Click to collapse
I love that topic... :laugh:

enetec said:
I love that topic... :laugh:
Click to expand...
Click to collapse
That topic saved my a$$

*Bump*
Why there's no option to delete a post?

enetec said:
Doesn't it works as simple apk too?
Click to expand...
Click to collapse
There's a modded apk here, somewhere, but the problem becomes the caller id functions don't work as it needs to be signed by Google to use the correct APIs. So unless Google messes up like they did with 2.05_rc4 we'll never have an "simple apk" version.

fr4nk1yn said:
There's a modded apk here, somewhere, but the problem becomes the caller id functions don't work as it needs to be signed by Google to use the correct APIs. So unless Google messes up like they did with 2.05_rc4 we'll never have an "simple apk" version.
Click to expand...
Click to collapse
I saw. Already installed as I said... They need the .jar and .xml of permissions ...
Anyway, the dialer is a *major* upgrade, not only a "cosmetic" one... It is a newer version than the one released with Aosp Nougat 7.1 and beneath there are some newer versions too, it is the newer one working on MM too (the others need at least v. 7.0 to work...)

enetec said:
I saw. Already installed as I said... They need the .jar and .xml of permissions ...
Anyway, the dialer is a *major* upgrade, not only a "cosmetic" one... It is a newer version than the one released with Aosp Nougat 7.1 and beneath there are some newer versions too, it is the newer one working on MM too (the others need at least v. 7.0 to work...)
Click to expand...
Click to collapse
Which version of dialer is this?

wolfu11 said:
which version of dialer is this?
Click to expand...
Click to collapse
5.1.131226882

Manish54 said:
5.1.131226882
Click to expand...
Click to collapse
Yup... Just used (yesterday...) the new "search around" feature to order my pizza...

Manish54 said:
There are a lot of apks and zips which aren't working on Moto Z. This one IS working.
Just flash it with TWRP and set as default phone app.
Click to expand...
Click to collapse
Does this works on Nougat?
Sent from my XT1650 using XDA-Developers mobile app

juliospinoza said:
Does this works on Nougat?
Sent from my XT1650 using XDA-Developers mobile app
Click to expand...
Click to collapse
Nope, it doesn't work with stock android nougat on my moto z xt1650-03, retailmx. After the restart the phone wasn't able to open, not a single app was able to recover my phone app; so I applied my TWRP backup and tried again, same result. So I decided to make it work because I didn't want to delete everything again so, this is what I did:
Make sure to flash the zip, and if you can use your phone anymore, don't panic like me...
1. Erase the app via Titanium Backup pro
2. Restart the phone
3. Go to the file explorer, find the zip of the nougatdialer and extract the dialer apk
4. install it like a normal app and voila!
5. grant permissions if needed.

I think the normal apk should work on nougat.
If not here's the nougat zip:
https://www.androidfilehost.com/?fid=457095661767120304

Viper4Android OxygenOS Open Beta 8 Works?

its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!

razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Using atmos sound system and is ok

Have you tried out their own internal audio control program

razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738

Eagle-no1 said:
Have you tried out their own internal audio control program
Click to expand...
Click to collapse
Yes, but im not satisfied with the result, The range of bands is very small

shafi31 said:
Backup your rom, install guitardedhero.zip
Root explorer - Go to root/vendor/etc and rename audio_effects.conf to audio_effects.conf.bak
Reboot
AND LET US KNOW
http://forum.xda-developers.com/showthread.php?p=68500738#post68500738
Click to expand...
Click to collapse
working great! :highfive:
Thks!! :victory:

fantamadnesss said:
Using atmos sound system and is ok
Click to expand...
Click to collapse
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?

quaresma158 said:
You mean dolbyAtmos on beta 8? If yes, could you please share zip or link?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24651442761498767

Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that

frickinjerms said:
Don't forget to install the deep buffer remover also in the guitarededhero thread, I couldn't get viper to work without that
Click to expand...
Click to collapse
Do you have a link fot his file? Can't seem to find it

jay_snake said:
Do you have a link fot his file? Can't seem to find it
Click to expand...
Click to collapse
Oops it was in the Dolby Atmos thread by westenbrood. My brain is derpy sometimes
HERE YA GO!
It's right there past the 6.5 download link, can't miss it. I don't know for certain if this is the magic answer for nougat, but if viper is showing all is well other than the driver status being abnormal (which was the problem with MM) then you should be good to go after flashing it. As always YMMV. Make a backup just in case.

Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone

dindoliya said:
Dolby seems to be working but V4A keeps closing and says Open App again.....never works.....what am I doing wrong? I renamed audio.conf to audio.conf.bak and rebooted the phone
Click to expand...
Click to collapse
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files

A.R.I.S.E. Leviticus 1.3 working just fine

razzorchile said:
its viper4android work on this version ? i try to use it on Open Beta 7 ,without success.
selinux mode changer dont work too. ( i cant change to permisive )
i use Open Beta 8 , Root (SR5-SuperSU-v2.78-SR5- ) , Custom TWRP.
Thanks!
Click to expand...
Click to collapse
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Sent from my Pixel XL using XDA-Developers mobile app

oriveradel said:
Yes, new version for Nougat
http://www.theandroidsoul.com/install-viper4android-nougat/
Click to expand...
Click to collapse
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since

gmlogan said:
Tried that on fresh install, installs no errors and then driver showed processing for a few seconds (but no enhanced audio) and then driver not processing ever since
Click to expand...
Click to collapse
I've tried everything to get viper to work, I don't understand - previously all I've had to do is install the apk, install drivers - reboot & jobs done!
Now it's like you need a masters degree.
I've followed so many guides, viper apk is installed, rooted, busybox & I've renamed the file in system / etc - but upon opening viper & attempting 2 install drivers, I'm told installation has failed.. something something busybox, something something check if rooted :what::banghead:
My hope now is a Dev will build a beta 9 build & incorporate viper

dindoliya said:
I must have done something wrong. I dirty flashed the ROM and installed A.R.I.S.E. again. Now everything seems to be working. I did not have to modify any files or flash any additional files
Click to expand...
Click to collapse
Sorry to hear that, remove it, reboot and flash zip again
Check SuperSu if still there delete it
rename file

xposed alternative full working

Hi all
After while that i miss xposed i really want again in on May op6t,
I found alternative that work very good for our device..
The main xda link Is here...
https://forum.xda-developers.com/xposed/android-9-0-xposed-solutions-t3889513
But work like official xposed...same app ...
Very Easy to install.
I use it for xinsta and minminguard and i love It.
https://drive.google.com/folderview?id=1hr4LP1mFd7Fpqnle3uYk_H6CTzQcIIdY
If people Need all file for download..without search
First riru core v16
Reboot
Edxposed v0.3.00
Reboot
And last step...install manager edxposed.
Open xposed....ull see orange or Yellow colour , reboot . And xposed became green
Enjoy

What about safetynet?

AkshayGunplay said:
What about safetynet?
Click to expand...
Click to collapse
I haven't tried this but from what I understand, anything that modifies the framework will force a fail on SafetyNet; no matter what.
Modifying the stock framework has always broken SafetyNet.
I wouldn't expect this to be any different.

tech_head said:
I haven't tried this but from what I understand, anything that modifies the framework will force a fail on SafetyNet; no matter what.
Modifying the stock framework has always broken SafetyNet.
I wouldn't expect this to be any different.
Click to expand...
Click to collapse
I dont know how to check safety but... I dont care heehhe

gaspolo said:
I dont know how to check safety but... I dont care heehhe
Click to expand...
Click to collapse
I believe you're the exception.

sssarg said:
I believe you're the exception.
Click to expand...
Click to collapse
Eheh for what u Need safetynet

gaspolo said:
Eheh for what u Need safetynet
Click to expand...
Click to collapse
Google Pay to start; banking apps. Even Pokomon Go verifies root and SafetyNet.

tech_head said:
Google Pay to start; banking apps. Even Pokomon Go verifies root and SafetyNet.
Click to expand...
Click to collapse
Pokemon , Snapchat bank....u Need to install before...xposed.,.After u can broken safety net as u wanted...and work...try.

I've been using EdXposed for a few weeks. Works perfectly on 9.0.12 with the only Xposed Module I have any interest in, XPrivacyLua.

gaspolo said:
Pokemon , Snapchat bank....u Need to install before...xposed.,.After u can broken safety net as u wanted...and work...try.
Click to expand...
Click to collapse
Any application, that actively detects root and modifications on every launch will not work.
Along with Google Pay, there are some banking and expense reporting apps that check every launch.

All working great

Is this the right sequence?
1.Flash magisk-riru-core-arm-arm64-v10.zip
2.Flash magisk-EdXposed-arm-arm64-v x.x_beta-release.zip
3.Installation XposedInstaller_by_dvdandroid_19_10_18. apk
Flashing zip files directly from magisk?
Edit: I've seen newer version of riru-core and EdXposed...can I install these newer versions?

gaspolo said:
Hi all
After while that i miss xposed i really want again in on May op6t,
I found alternative that work very good for our device..
The main xda link Is here...
https://forum.xda-developers.com/xposed/android-9-0-xposed-solutions-t3889513
But work like official xposed...same app ...
Very Easy to install.
I use it for xinsta and minminguard and i love It.
Click to expand...
Click to collapse
For me xinsta is not working
Where there any extra steps you did to make it work

BHUSHAN7988 said:
For me xinsta is not working
Where there any extra steps you did to make it work
Click to expand...
Click to collapse
Xinsta work very well.. After install u Need to update the xinsta hook Clik on xinsta and github
I also remove xinsta from battery optimization

alberto8523 said:
Is this the right sequence?
1.Flash magisk-riru-core-arm-arm64-v10.zip
2.Flash magisk-EdXposed-arm-arm64-v x.x_beta-release.zip
3.Installation XposedInstaller_by_dvdandroid_19_10_18. apk
Flashing zip files directly from magisk?
Edit: I've seen newer version of riru-core and EdXposed...can I install these newer versions?
Click to expand...
Click to collapse
I download all file and install manually from twrp Is the same.
Install in that order and reboot at every install

gaspolo said:
I download all file and install manually from twrp Is the same.
Install in that order and reboot at every install
Click to expand...
Click to collapse
Thanks
Can I install latest versions? I think I would have the same result as the previous versions...

Adding modules (riru 1st then edxposed) in magisk also makes it work but requires 2 reboots

AkshayGunplay said:
What about safetynet?
Click to expand...
Click to collapse
FYI- Safety Net passes and all my apps work including GPay.

Skenderbeggar said:
FYI- Safety Net passes and all my apps work including GPay.
Click to expand...
Click to collapse
This is cool.
Previously Xposed modified the framework.
It looks like this builds on top of Magisk and never truly modifies the framework.
I think I'll give it a try.

And what exactly is so cool about Xposed anymore that u cannot use or do with magisk modules. Xposed is obsolete and pretty useless tbh.