Hello,
my Phone got this Update CPH2069_11_C.79 OTA. Where can i find it to download!? Would reinstall the firmware.
Hi,
you can't download the OTA file seperately.
If it installed successfully, save your content and do a reset (its nearly the same as a clean install of a full firmware)
The firmware version on the official site is slightly older than the one you can download from your phone (I asked the support about it).
Assuming you have an Oppo A52, you can check this link though: https://support.oppo.com/au/software-update/software-download/?m=A52
In next days. Or weeks. Or months.
Good luck.
Related
Hello,
I updated my HTC One M8 first time since I first buy the phone. My Original ROM was 4.4.2 and I updated to 4.4.4 (OTA update ATT). I rooted phone and did S-OFF. But recently I changed ROM back to 4.4.2 using hard reset and install back very first original factory ATT Rom (4.4.2). Now when try to update my ROM through ATT OTA, it gives me message to "Wait (24 Hrs)" I already wait for 4 days, clicking back on Software Update. Also my MMS service is not working ( My MMS service was working before with both 4.4.2 and 4.4.4).
My questions is " Is there anything which I have to wipe or clear to make it completely fresh like brand new first time OS ?"
Thank you so much for reading my post!
Since you have an AT&T branded M8, and are S-off, you can just use a RUU to switch versions. No need to take an OTA (other than to preserve data, but it sounds like that isn't an issue if you have already downgraded)
The most recent is here: http://www.htc.com/us/support/rom-downloads.html
Older versions are available, but I don't have a direct link for them.
jshamlet said:
Since you have an AT&T branded M8, and are S-off, you can just use a RUU to switch versions. No need to take an OTA (other than to preserve data, but it sounds like that isn't an issue if you have already downgraded)
The most recent is here: http://www.htc.com/us/support/rom-downloads.html
Older versions are available, but I don't have a direct link for them.
Click to expand...
Click to collapse
I would appreciate if you can attach link for 4.4.4 RUU file or .zip file(Install from TWRP). I dont like Marshmallow.
Check AT&T General section forum... it is available under stickied thread
Some time ago I loaded a firmware onto my VZW S8+ (G955U) which I thought was a legitimate firmware. However, I've never been able to update the phone since. The firmware that I loaded was CRE1 and since loading that, no OTA updates have occurred and even trying to use the VZW update tool, I get an error saying no update for that firmware or something to that effect.
I assume that I would need to flash back to a base version 8 firmware and then see how things go from there but I haven't been able to locate a base v8 firmware - assuming that is the direction I need to go.
Can anyone advise? The phone is not rooted. I did see one other similar thread with CRE1 firmware from 2018 - I can try downloading the closest firmware to CRE9 that I can find, which is CRK9, and see if I can get it to load.
Other suggestions/ideas are welcome!
[UPDATE]
So I essentially followed another post here and using Odin 3.13.1 I loaded CRK1, the oldest I could find that was near CRE1, and the phone came back up and pretty much immediately notified of an OTA update. About 12 or so OTA updates later and I'm at the current OTA release.
I'm having the same issue. I bought a VZW S8+ (G955U) from eBay Seller mistyelectronics that was supposed to be new in box. It has never updated since I received it almost a year ago. It stuck on Software Version G955USQS5DSE5. Any insight or advice to go the same route? I used Odin years ago. Where would I look for the files to load to the phone?
I appreciate any help you can give.
So my phone is Doogee S90. In the beginning everything started with unlocking the bootloader, root and flashing TWRP recovery mode, but i softbricked it and somehow found an old stock firmware update from 2018. I fixed the phone successfully with it, then removed the root, locked the bootloader and started the phone, it works, but i cant update it to the latest version cuz it just can't find it, my currently version is Doogee_S90_Android8.1-20181116_20181123-1523 and the latest is DOOGEE_S90_Android8.1-20190629_20190629-1831. I searched everywhere, but cant find it and cant update it to the latest version, so if someone can make me backup from the latest one as firmware image will be great or atleast tell me how to fix the "Wireless Update" to get the latest version, please.
btw, if this Thread is not in the correct category, please tell me where it has to be or just move it.
My phone is Chinese variant running miui 11 Android 9 and i installed the anti brick from the mega thread. Now i have an Android 10 update and i downloaded the update for 3 times but Everytime it says update.zip is corrupted during update process. I also tried with choose update package to update manually but same results. How can i overcome this problem?
This thread?
Not sure, since it's pretty long ago that i used to flash custom recovery's and roms, but if you have TWRP as your recovery i don think you're able to flash official firmware. Also read something in that thread about Android 10 and Anti Brick not going along very well. My best guess is; get rid of TWRP and Anti Brick by flashing the correct official firmware for your device via Fastboot.
Try and find a very very VERY clear howto. Lots of reading and caution = not bricking your device.
Hi, im on 12.5.11.0.RJSEUXM and I want to upgrade to miui 13, but after downloading the zip, and trying to install it with the updater app (choosing a zip from menu) its says "unable to verify, you cant install this stable rom"
Is there any way to fix that and install the rom? putting that zip as "update.zip" at the root of my internal storage and booting into recovery does nothing (in previos versions an option called "update.zip to system" was there)
Or I need to do something more to update?
Thanks.
Each recovery ROM seems to be verified at Xiaomi servers during upgrade process and if they block the installation for whatever reason, you're out of luck. The reason might be that the ROM is supposed to be used only by selected testers, in a specific region or maybe the ROM was pulled due to major bugs (I saw some complaints about SIM/network incompatibility in Europe). I can't install this update as well. It is possible to force the installation via fastboot, but I believe that Xiaomi has a good reason why they prevent us installing this version. I'm waiting until it arrives on its own as an OTA update..
_mysiak_ said:
Each recovery ROM seems to be verified at Xiaomi servers during upgrade process and if they block the installation for whatever reason, you're out of luck. The reason might be that the ROM is supposed to be used only by selected testers, in a specific region or maybe the ROM was pulled due to major bugs (I saw some complaints about SIM/network incompatibility in Europe). I can't install this update as well. It is possible to force the installation via fastboot, but I believe that Xiaomi has a good reason why they prevent us installing this version. I'm waiting until it arrives on its own as an OTA update..
Click to expand...
Click to collapse
Oh..ok yes its safer to wait. Thanks
Just to confirm - I never received 13.0.2.0 EU ROM, nor I was able to install it via sideload/ROM updater. I couldn't install 13.0.4.0 manually either, but today I got the update over OTA and installation went through without any issues.