Hello. I tried to port TWRP for our device, can you test it? Will it start, will it work? All this should be reported to me. An unlocked bootloader is needed. TWRP is loaded by the command in fastboot: fastboot boot name.img (name TWRP).
it doesn't boot..
Related
I want to install Supersu using TWRP on my 360 gen1 (LCA44B).
I've built a USB cable like RootJunky's Guide and unlocked the 360 (fastboot oem unlock). The bootloader shows UNLOCKED STATUS CODE 1.
However, I can neither flash TWRP (fastboot flash recovery twrp.img), the flash process says successful (sending recovery... OKAY, writing recovery... OKAY finished), but the boot into Recovery shows TWRP does not exist.
And when I load TWRP (fastboot boot twrp.img) this has no access to the system partition.
What is wrong, what can I do?
hello everyone!
I wanted to root my phone but i couldn't manage even if the way should be quiet easy...
-bootloader already unlocked
-debug usb on
downloaded twrp 3.2.3-0 sagit
“fastboot devices”
“fastboot flash recovery recovery.img“
“fastboot reboot”.
i didn't get any errors...
if i try this command: "fastboot boot recovery.img " the phone restart and stay in loop mode...
volume(+) + power keep giving me the stock mi recovery :crying:
MIUI 10
i tried this procedure several times without any result...
Instead of fastboot reboot do fastboot boot recovery name.img and install something
Oreo tastes better with Mi6
worked with twrp 3-2-1-1, but works only if i lunch it via shell
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.img picture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Hi Sven,
This isn't going to be the most advanced reply, as I'm not very experienced with this stuff either, but it seems you have accidentally flashed your twrp image to 'boot', wherever that is, which is why the phone isn't able to boot to system.
Can you still boot into bootloader and recovery (twrp)?
If so, then I'd suggest using fastboot to flash a sock or custom ROM. I'm not sure exactly which one though, you have basically the same model as me and that seems to use the JETER ROMS a list of which are over here (can't post links yet, so you will just have to search on mirrors . lolnet . com /firmware/moto/jeter/official/ or remove the spaces
I seem to have somehow lost the partitions on mine, but will start a new thread question about that.
Sven Onderbeke said:
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.imgpicture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Click to expand...
Click to collapse
Just flash a stock boot.img to boot. Then just flash TWRP to recovery. In TWRP, format data. Type yes. Then reboot recovery. Then Use TWRP to flash magisk. Done.
Hi again Sven,
I just wanted to let you know that I just downloaded the following RETAIL ROM
ALJETER_RETAIL_9.0_PPPS29.55-35-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and used the following fastboot commands, one at a time.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Which rebooted into bootloader so pressed "start" and all booted fine now. It looks like we have the same device, so hopefully that will work for you too.
Hi guys,
I'm trying to install LineageOS to XZ2 Compact but I have some issues. I was following this guide. (NOTE: Bootloader unlock was done by owner of phone, not sure if he did something wrong)
As said in guide, I should connect phone to PC and reboot to bootloader using command
Code:
adb reboot bootloader
This works. However, when trying to flash boot partition with LineageOS recovery I'm getting fastboot errors. Here are commands and their verbose output (output is same for all these partitions - boot, boot_a, boot_b, boot__a, boot__b):
Code:
fastboot flash boot lineage-17.1-20201225-nightly-xz2c-recovery.img
fastboot: error: cannot get boot partition size
fastboot version is 30.0.5
Any ideas?
Have you tried fastboot devices to see if your device shows up? If that does work, can you try "boot a" with no underscore(s)?
I managed to install Lineage OS to phone. Problem was (strangely) with linux fastboot. It detected device normally but something was not right. Done same steps on windows pc and it worked.
I forgot to update thread.
I was trying to root my moto g8 play, as there is no TWRP for my device (at least I didn't find one), I tried a diffrent method:
I got the exact same firmware and extracted the boot.img, patched it using magisk, then installed it on fastboot mode with the commands:
fastboot flash boot_a patched.img
fastboot flash boot_b patched.img
fastboot reboot
After this my device went into a bootloop, I tried fixing it with the commands in the flashfile.xml, but now it just says "Your device is corrupt. It can't be trusted and may not work properly" and doesn't turn on.
Note: Bootloader is unlocked
Is there anything I can do?