There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
uberano26 said:
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
Click to expand...
Click to collapse
I appreciate the reply. RSD doesn't detect, but ADB can. I can send fastboot commands via the bootloader, so I think drivers are OK. What got me in this mess was flashing the Chinese TWRP posted on the root guide here on XDA so I think the drivers are installed ok. I think it's a Windows thing.
I found that page you're referring to last night and read up on it. I found the retail US stock firmware image posted by another here on XDA and proceeded to go through the steps. After looking, the batch file immediately closed and did nothing. Then I went into the XML file and removed the m in mfastboot. After runnng manually, I found that it kept saying mfastboot.exe is not found. Then it went through every step as I've seen before, but every time a command was finished it would say "Image not signed or corrupt". I believe if I could somehow get RSD lite to work that I would be OK. I'd love to get this thing booting again.
uberano26 said:
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
Click to expand...
Click to collapse
OK, I found mfastboot.exe located here (http://forum.xda-developers.com/gen...ng-mfastboot-exe-to-unbrick-motorola-t3203518) and had NO idea there was such a thing as mfastboot !
Unfortunately when running this, on all of these lines of mfastboot:
mfastboot flash gpt.bin partition
mfastboot flash bootloader.img bootloader
mfastoot flash NON-HLOS.bin modem
mfastboot flash fsg.bin fsg
mfastboot flash adspso.bin dsp
mfastboot flash logo.bin logo
I get "Image not signed or corrupt"
When I flash all of these, they go through OK:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
So I'm hoping this helps someone figure out what I'm doing wrong. Again, I'm just trying to get back to stock.
- You are restoring the firmware without wiping the device, i'd try fastboot erase userdata first before flashing the rest, could be worth a try.
- I get "Image not signed or corrupt" when flashing a modified kernel too, but it is flashed regardless.
- I got root with the chinese twrp, the others gave me bootloop.
Good luck.
I too have a freshly-bricked EU dual-SIM Z Play that gives "Image not signed or corrupt" errors when I try to flash recovery and boot. Seen by fastboot, but not by RSD.
edit: more of my saga is here http://forum.xda-developers.com/moto-z-play/help/identifying-firmware-required-phone-t3517360/
yeahhh, i manage to flash my moto z play back to stock, the rom was bad or something i downloaded from here.
https://mirrors.lolinet.com/firmware/moto/addison/official/RETLA/
so happy
joesee said:
There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
Click to expand...
Click to collapse
joesee said:
OK, I found mfastboot.exe located here (http://forum.xda-developers.com/gen...g-mfastboot-exe-to-unbrick-motorola-t3203518) and had NO idea there was such a thing as mfastboot !
Unfortunately when running this, on all of these lines of mfastboot:
mfastboot flash gpt.bin partition
mfastboot flash bootloader.img bootloader
mfastoot flash NON-HLOS.bin modem
mfastboot flash fsg.bin fsg
mfastboot flash adspso.bin dsp
mfastboot flash logo.bin logo
I get "Image not signed or corrupt"
When I flash all of these, they go through OK:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
So I'm hoping this helps someone figure out what I'm doing wrong. Again, I'm just trying to get back to stock.
Click to expand...
Click to collapse
The commands that aren't working aren't being given correctly. Should be like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
Milly7 said:
The commands that aren't working aren't being given correctly. Should be like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
Click to expand...
Click to collapse
You just saved my phone. Can I buy you a beer or something?
theodric said:
You just saved my phone. Can I buy you a beer or something?
Click to expand...
Click to collapse
It's all good. Just helping out. Glad it helped.
joesee said:
There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
Click to expand...
Click to collapse
I had the complete restore section reversed when you saw it on my thread, someone pointed it out and it's been fixed now.
Edit: I see someone's done it here too.
You also don't need to restore fully, just do the restore for ota and it should be enough if you've not flashed over the other stuff.
well i forgot to boot and set up a pin before installing TWRP, soft bricked myself for hours, this thread helped me return to stock so i could set a pin so TWRP would work, THANK YOU!
also if anyone else ends up here, and is having trouble finding the US retail stock image, i used the one from https://mirrors.lolinet.com/firmware/moto/addison/official/RETUS/
Is that an official signed image?
Can i use it to relock bootloader?
Thanks!
dyonissos said:
Is that an official signed image?
Can i use it to relock bootloader?
Thanks!
Click to expand...
Click to collapse
None of the images are signed and won't relock the bootloader.
Would this allow me to return to Marshmallow after sideloading a Nougat OTA, given I unlock my bootloader? I flashed a build from a different region (I think retbr or something) onto my Canadian Z Play, but the build number doesn't match what everyone else is getting from. Just looking to revert to Marshmallow to perform a proper update instead of impatiently sideloading an OTA.
IncendiaryPyro said:
Would this allow me to return to Marshmallow after sideloading a Nougat OTA, given I unlock my bootloader? I flashed a build from a different region (I think retbr or something) onto my Canadian Z Play, but the build number doesn't match what everyone else is getting from. Just looking to revert to Marshmallow to perform a proper update instead of impatiently sideloading an OTA.
Click to expand...
Click to collapse
Yep if you have the right factory image for your device.
Leraeniesh said:
Yep if you have the right factory image for your device.
Click to expand...
Click to collapse
Thank you. I've never had issues doing stuff like this before, but for some reason it scares the hell out of me with this phone. Maybe because I haven't had it for very long, lol. Downgraded to Marshmallow successfully. Hopefully I don't run into any issues in the future that would require an RMA, but out of all the phones I've had over the years, I've only had to RMA a Nexus 5 due to a problem with the screen.
Hi everyone. Is this guide is okay for reteu dual sim? And please point me if there is a firmware for reteu nougat. I softbrick my device and my imei is 0. I want to restore it please guide me as i am a noob in fastboot commands and steps. Thanks in advance
Vitxlss said:
yeahhh, i manage to flash my moto z play back to stock, the rom was bad or something i downloaded from here.
https://mirrors.lolinet.com/firmware/moto/addison/official/RETLA/
so happy
Click to expand...
Click to collapse
do you have rooted device with twrp (maybe) ?
also, is the boot.img you got from Android 7 or 6.xx ?
Thanks
I use the DOWNGRADE script found here :
https://drive.google.com/file/d/0B134drJ4-Ed0MHQ5aE1wUmp5eFk/view
The original discussion here :
https://forum.xda-developers.com/moto-z-play/how-to/autoscript-install-firmware-downgrade-t3558118
Note that the original script is not ideal. The actual script came from @-=MoRpH=- on comment #4
Can anybody provide with the flashing instruction for moto g5
yolomonkey said:
Can anybody provide with the flashing instruction for moto g5
Click to expand...
Click to collapse
Assuming you have fastboot installed on your pc
Download firmware and unzip to where you have fastboot
Open command prompt at fastboot location with firmware
type the following although I have marked lines that you should not use unless you have to as flashing wrong firmware can damage your device
Code:
fastboot oem fb_mode_set Only required if you wish to relock bootloader - if not skip it
fastboot flash partition gpt.bin Do not use unless you want to repartition your device - incorrect file will damage your phone
fastboot flash bootloader bootloader.img Do not use unless you want to replace the bootloader - flashing wrong file will hard brick
fastboot flash logo logo.bin No need to flash if you are going to flash a custom rom after and have already flashed a modded version
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata Will erase everything on internal storage but you need to do it
fastboot erase customize Not sure about this - might be for other device
fastboot erase clogo Not sure about this - might be for other device
fastboot oem fb_mode_clear Only required to relock bootloader if you used the very first command
fastboot reboot
NOt working
My device keeps booting to the recovery
even though i flashed my recovery. it boots to twrp
yolomonkey said:
My device keeps booting to the recovery
even though i flashed my recovery. it boots to twrp
Click to expand...
Click to collapse
have you read the FAQs on my twrp thread because the answer is there (assuming you have flashed a custom rom and can boot it through the bootloader by selecting start)
TheFixItMan said:
have you read the FAQs on my twrp thread because the answer is there (assuming you have flashed a custom rom and can boot it through the bootloader by selecting start)
Click to expand...
Click to collapse
could you please link it. I am so grateful for you replying this fast
yolomonkey said:
could you please link it. I am so grateful for you replying this fast
Click to expand...
Click to collapse
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737
FAQs are on 2nd post
hey
please i want help i want stock rom for moto g5 XT1676 to unbrick by blank-flashing and how do it in steps on my dead phone
sorry for bad english
my phone moto g5 rooted when i try to unroot by minimal adb past wtong stock rom in Minimal ADB and Fastboot folder when i intered command and i pasted this order :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
//////////////////////////////////////////// after this step ended my phone not strat or boot /just white led blinking when connected by charger
mention / my phone is moto g5 xt1676 rooted but i flashed this stock CEDRIC_NPP25.137-93_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,forMotor ola Moto G5(XT1672) but my phone Motorola Moto G5(XT1676) please help me
If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
TheFixItMan said:
If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
Click to expand...
Click to collapse
after i did this steps and finshed the last command the phone not open
waleedzzz said:
after i did this steps and finshed the last command the phone not open
Click to expand...
Click to collapse
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released
TheFixItMan said:
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released
Click to expand...
Click to collapse
i soloved by this method These two files are those that are damaged when doing downgrade on your G5 bike
therefore here I leave you the most updated
so that the flashees and your phone can light up without the SD
if you flash these two you will not need to flash a complete firmware
Just open the folder that says Fastboot and click on the MAF32.exe file or START.bat
Once there you will insert the micro sd on your g5 motorcycle and turn it on in fastboot mode and take out the sd
and then connect your motorcycle g5 that is on and flash these commands
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
and that would be everything and you could start your phone without the micro SD
the link to slow
Okay, so im new to this stuff and still i managed to root the phone and flash RR 7.1.2. But i tried to unroot it and this happend:
I only have access to the bootloader and thats it. No recovery, no ROM nothing....when i start ti, it says that my phoe is unlocked and its dangerous and that the phone will boot in 5 secs but it never does....plz help me..and i wanna know where can i learn about all this stuff...its freaking me out since this the only phone i have.....plz help me..
You have two options
1 - flash twrp recovery and then use it to flash a custom rom
Assuming you have named the recovery image recovery.img
fastboot flash recovery recovery.img
https://drive.google.com/open?id=1MLlljM7BzMj9Da57LeyBHyg81cHdW1cB
Then wipe system data cache/format data & follow procedure to flash a custom rom
2 - flash stock rom firmware which can be found (plenty of guides out there for how to just search)
https://mirrors.lolinet.com/firmware/moto/cedric/official/
If you have unlocked the bootloader it will always says your device is not secure unless you flash a modified boot image
TheFixItMan said:
You have two options
1 - flash twrp recovery and then use it to flash a custom rom
Assuming you have named the recovery image recovery.img
fastboot flash recovery recovery.img
https://drive.google.com/open?id=1MLlljM7BzMj9Da57LeyBHyg81cHdW1cB
Then wipe system data cache/format data & follow procedure to flash a custom rom
2 - flash stock rom firmware which can be found (plenty of guides out there for how to just search)
https://mirrors.lolinet.com/firmware/moto/cedric/official/
If you have unlocked the bootloader it will always says your device is not secure unless you flash a modified boot image
Click to expand...
Click to collapse
Dude, I'm a total idiot at this stuff...
I was trying to flash the stock ROM by some help from a youtube channel called Andoid Doctor. I used the codes he gave me and the stock firmware he provided me for cedric. But all my computer showed was some slot error.
I'd really appreciate it if you helped me out.
Astitva_ said:
Dude, I'm a total idiot at this stuff...
I was trying to flash the stock ROM by some help from a youtube channel called Andoid Doctor. I used the codes he gave me and the stock firmware he provided me for cedric. But all my computer showed was some slot error.
I'd really appreciate it if you helped me out.
Click to expand...
Click to collapse
Firmware must be the same or newer
See the link in my post above for all the firmware - choose the right one for your region
If you don't know which to choose just use this one
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Commands are (assuming you know how to use & have fastboot already setup as you have already unlocked the bootloader)
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin (only flash if newer version of android eg going from nougat to oreo)
fastboot flash bootloader bootloader.img (only flash if going to a newer version of android)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
TheFixItMan said:
fastboot flash recovery recovery.img
https://drive.google.com/open?id=1MLlljM7BzMj9Da57LeyBHyg81cHdW1cB
Then wipe system data cache/format data & follow procedure to flash a custom rom
Click to expand...
Click to collapse
Wasn't trying to go back to stock myself (though I did have to in the end) but this was the only rom I found that worked full stop. Thanks so much for this.
Hi there guys,
I need help with my phone. I've flashed TWRP on it so i would be able to flash a custom ROM. Everything went fine and i was able to install the custom ROM without errors. Now, everytime i start my phone it only shows the "No Command" screen with an open belly Droid. The only way i'm able to boot it is going to fastboot mode and booting into Factory Mode.
I tried flashing the stock rom with several different methods, and all ends in the same, the "no command" screen on boot.
It's now flashed with the stock rom but i can't get it to boot normally. I've tried Formatting /data, /cache, everything in my hands. What should i do?
how, exactly, did you flash twrp?
using the instructions provided on twrp website
and what procedure did you use to re-flash stock?
i tried using fastboot and also the "Rescue and Smart Assistant" app, both ended up with the same results
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
try doing this
hi there,
that's what i did when i mentioned that i flashed using fastboot...
sergiobaiao said:
hi there,
that's what i did when i mentioned that i flashed using fastboot...
Click to expand...
Click to collapse
these exact commands in this exact order?
yes, exactly
then unfortunately im out of ideas