Develop Bugs

[ROM][2017-10-22][UNOFFICIAL] XenonHD ROM for Mix 2 (Chiron) [7.1.2]

XenonHD ROM for Xiaomi Mi Mix 2
A Team Horizon ROM
Based on AOSP r36 7.1.2
This ROM has all the features XenonHD has to offer.
All hardware functions including:
NFC
Bluetooth Audio
Fingerprint Scanner
Doze & Wake-up Gestures (dtw works after the first reboot)
And...many more things.
Magisk is no longer built in, so you'll need to flash it when first installing, and after every dirty flash.
VoLTE doesn't work (at least on T-Mobile). I believe most of the pieces are in place, but there may be something in the firmware that's preventing it? If I could figure out how to tap into the stock cust files, I might be able to figure out how to get it working.
Proximity Sensor is working:
Notification Light:
I have slowed down the notification light so it isn't all amped up. To make it completely usable, go to:
Fixed default notification blinks for built-in apps so they are slowed down without needing to go to settings.
For use-installed apps, add them to custom notification list in settings > notifications > gear icon > notification light > + in upper right corner > select app. Apps added to that list will have slow notification blinks.
I simply cannot find a way to make user-installed app notifications behave the same as built-in apps. Grrr!!
I have also made the light sensor wait longer before dimming the screen. This helps with left-handed activities blocking the light sensor and almost immediately dimming the screen.
Reduced time to go back from dim to bright. Screen will dim after 5 seconds, returns to bright after 2 seconds.
I've remove configpanel & pocketmode...they did little to nothing, and may have caused more battery drain than I care for.
Required prior to installing:
Unlock Bootloader
Install custom recovery: https://www.androidfilehost.com/?fid=962021903579490303
HUGE thanks to IceMan for bringing this to Mix 2!
A quirk with this TWRP: This one looks for backups in TWRP/BACKUPS/MIX_2 folder. Normally, the MIX_2 folder is named after serial number of your device.
So, you existing backups won't be found until you rename the folder in BACKUPS to MIX_2.
Installation Instructions:
Dirty flash is now available with the above TWRP and 10-26-2017 rom.
Download the most recent build: https://www.androidfilehost.com/?fid=673791459329071426
Download Gapps (I use Open Gapps Mini) --> http://opengapps.org/
All versions from 10-24-2017 are now encryptable.
From TWRP Recovery:
IF COMING FROM MIUI-BASED ROM: FULL WIPE AND FORMAT DATA!!
If you encounter ERROR 7, during XenonHD install, install Global MIUI ROM, then do full wipe and data format again, then install XenonHD rom.
If coming from AOSP-based ROM:
- Full wipe (Cache, Davlik/ART Cache, System & Data)
- Flash ROM zip
- Flash Gapps zip
Huge thanks to Mokee for bringing this device up and making a great place to start.
Also a very HUGE thanks to @Arasthel for his work on proximity sensor and figuring out the bluetooth reboot stuff and other hints, suggestions and incalculable work.
I'd also like to thank all of you folks here for trying this ROM and providing constructive feedback.
In addition, I appreciate your patience when issues come up that need to be fixed. I am not a developer, and I have a full time job and a wife that takes precedence most of the time
Sources:
Vendor:
https://github.com/hondajohn88/android_vendor_xiaomi_msm8998-common
https://github.com/hondajohn88/android_vendor_xiaomi_chiron/tree/xenonhd
Kernel:
https://github.com/hondajohn88/android_kernel_xiaomi_msm8998/tree/xenonhd
Device:
https://github.com/hondajohn88/android_device_xiaomi_chiron/tree/xenonhd
https://github.com/hondajohn88/android_device_xiaomi_msm8998-common/tree/xenonhd

reserved

reserved 2

Does safety net pass with or without magisk?

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
With magisk its working
Gesendet von meinem MI Mix 2 mit Tapatalk

THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs

Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)

KOLIOSIS said:
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Click to expand...
Click to collapse
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.

subashchandran said:
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
Click to expand...
Click to collapse
Glad everything is working for you so far. Bluetooth audio in car should work (it does on mine), but I found the volume on the car set to zero so needed to turn that up. That was a brief "oh crap" moment that I thought it wasn't working lol

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
I think it fails without it, but magisk is built in, so if have to remove it to find out for sure.

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
IT'S ALL GOOD @hondajohn88 . :good:
This ROM is daily-driver material,every update from here on out is a bonus & very much appreciated. :good:

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.

Arasthel said:
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Click to expand...
Click to collapse
That's cool you got the Bluetooth working on RR, knocking little things out one by one ?
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ??
By the way, does android auto work on your rr?

Everything except proximity sensor works and works as good as stock. I have installed custom font, black swift substratum OMS theme without any hiccups. The rom is buttery smooth and I've been getting a better battery drain trend on this compared to resurrection/mokee. I have naptime doze installed to see if i can ooze out more battery goodness to the levels of epic Rom(miui 9)
Overall this is super encouraging to see a daily driver rom this early for mi mix 2.
There is one edge case which might be a bug, when connected on car Bluetooth and watching something on YouTube.. And then you get a call, i pressed answer on the car knobs/buttons.. I couldn't hear the person talking.. Car was displaying "audio disabled message ”. But talking/call and video/music in isolation works just fine.

Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel

slyyke said:
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
Click to expand...
Click to collapse
Thanks for the info about android auto on RR. I'll take a look at their repo and see if I messed up a USB setting somehow.
As far as I'm concerned, other ROMs can be discussed here.
Open source should be crowd sourced for maximum problem resolution.
RR probably (?) Did the same as me... Mokee made a commit in qcom/audio that did the trick.

hondajohn88 said:
That's cool you got the Bluetooth working on RR, knocking little things out one by one
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ?
By the way, does android auto work on your rr?
Click to expand...
Click to collapse
Hi... Thank you again for the wlan.ko tip. I deleted all instances of that in my out folder, dirty built and it's all good. Sped up my test time considerably! Woohoo! :good:

Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!

stu5797 said:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
Click to expand...
Click to collapse
I haven't used rr for this phone, but I think at this point rr probably has more options. This one has quite a few, and as son as I get most of this ROM straightened out, I'll try adding more options.
I'll add some screen shots of the settings to help people decide.
Thanks ?

Great work by a great Dev,
Thanks for putting in the work, smoothhhh rom~

DELETE

DELETE

DELETE

Reserved

For Indian Users +8.1 AOSP Users
If Jio 4g voice is offline Turn on Location and it will work
P.s Turn on location in Battery saver mode it will not consume more battery then.
Regards~

Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?

bohdankrulik said:
Great, I'll check this in few days Before this i have questions
Magisk works on this rom?
Can i return to nougat roms?
Click to expand...
Click to collapse
magisk is not working ? for now
---------- Post added at 01:49 AM ---------- Previous post was at 01:07 AM ----------
Treble Support Included
You can now flash any GSI Image on This TWRP
detailed Instructions on it will be added later ?
Regards~

Proximity sensor does not work

Earpiece volume is too low. Having trouble listening to calls.
And yes safetynet passes. I am able to use Google Tez and Snapchat.

mthepa said:
Proximity sensor does not work
Click to expand...
Click to collapse
it works just need to be calibrated

After installing this TWRP oreo, the screen does not work

I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.

stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~

murtaza1326 said:
there are some personal reasons for not opening device tree and vendors please understand also treble support is there so
any GSI image will bootup without issue so ahead from this I don't think no more roms needed also kernel sources are already there.
Regards~
Click to expand...
Click to collapse
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.

stanislavskiy said:
My message was for Dinolek
And Treble support is good but not enough if you want to build a rom for yourself because Dinolek made changes for core system libraries/frameworks. And kernel is not a problem at all. The problem was to make everything working on system-level and Dinolek did it. That's awesome.
Click to expand...
Click to collapse
i replied on his behalf only he have exams i was also there when he was bringing up this project now i openly say why sources are hidden you know lunik he charges money for developing roms also he didn't provided credits to patches owner dinolek did it for us i know other developers also want this but if all sources goes out i am damn sure lunik will copy his work and earn money from it so sources are not open tho kernel sources with modifications are out you can bringup with that kernel

stanislavskiy said:
I know you understand how important is to upload a source code of your rom. Because all your work based on a source code from other contributors of MTK community that they provided for everyone. Your rom can even has my code (just because one of the people you mentioned used it). So I think it is important to share the code with the community. It will helps to fix bugs and create new roms in the future. And it will be fair for all people have been making roms before you. Also some people (like me) want to make enchancements to original code from Android vendors but it will be impossible without source. I hope you understand my position and will make needed acions once you will be ready to show it for the public.
Click to expand...
Click to collapse
Source will be uploaded when rom get to beta stage.
I'm not using clear aosp sources, I based on Mediatek alps 8.1 source code, that's why it's hard to share it in proper way.
Nothing is based on work from other contributors, except maintained ones.

Stuck at boot animation

Test results
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J

SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
Thanks for feedback.
About 2 and 3, install latest 6.2.0.0G from flyme site, not twrp one.
For 4 flash the fix from rom download link fix_alsps_mblu2_oreo.zip, it will be included in next update.
About 5, we don't have gyroscope, on other firmwares it is emulated from magnetometer.
What do you mean in 9?
To disable hardware keys and enable software flash zip from faq.

SAM.J said:
So i have tested this rom in my phone fr 2 days & i gt a result ...
What doesn't work
_________________
1)No navigation bar(no option to switch)
2)It doesn't restart (only power offs if u click on restart)
3)Power button doesn't work when u want to switch on the device
4)Proximity sensor error
5)gyroscope sensor error
6)Apps booting time is very slow
7)low ear-peace & speaker vol
8)Magisk error(if u flash magisk it stucks in boot-loop)
9)Physical home & back button doesn't work
10)Headphone sound output is bad
11)It takes more time to install an app
12)Camera is avg
13)2nd time if ur flashing this os it just says No OS INSTALLED while booting the device.
14)Call quality is not that much gud (avg)
What works fine
______________
1)OS booting & installing time is very fast
2)Battery management is very good
3)Ram management is very good
4)Wifi, hotspot, celular data, bluetooth tethering, USB tethering works fluently
5)location is very accurate
6)some of the basic sensors works
7)Touch works very well
8)very less heating issues
This are the results i gt in the testing of this rom in my device thanks to the developer nd all the persons who are been works on this
Cheers SAM.J
Click to expand...
Click to collapse
2nd,3rd and 9th option from not working are working fine on my device.

Thank you very much for the firmware!

[REQUEST][ROM][A520f/A720f][OFFICIAL] Resurrection Remix 6.0

please release [ROM][A720f/A520f] [OFFICIAL] Resurrection Remix 6.0
Everyone like this please say!

I'm trying to build one for a5, but may be unsuccessful.
Wish me luck!

Plz post new RR 6 thread for A520F.....now running 5.8.5

@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.

Thanks
sheepkill15 said:
@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.
Click to expand...
Click to collapse
thanks for it
if you can port this for a720f

@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.

SoloMid Hazard said:
@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.
Click to expand...
Click to collapse
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes

sheepkill15 said:
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes
Click to expand...
Click to collapse
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.

SoloMid Hazard said:
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.
Click to expand...
Click to collapse
I don't know which version is good, I don't use it

watched reddish purple balls for about 20 minutes... did the 2nd round and after maybe 90 seconds I am checking it out. Thanks!

+1 ThX

while flashing on SM-A520S 90% flashing bar showing then this error come
Eror 1001 cant mount system
sorry for bad english
try many times also format every thing but still got this error

question
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro

Chiha ALi said:
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro
Click to expand...
Click to collapse
In the current build, the biggest problem is that the buttons dont light up, but I fixed that in the meantime, just haven't uploaded it yet. The other noticeable issue is that the battery life is not perfect. I'm working on it too. The radio isn't working yet, but you don't use it, there's nothing more.
I don't know about dual sim, since I have the normal one.

Does anybody else face a problem of a laggy front camera using apps like snapchat/messenger/instagram?

Thank you very much for this rom bro
problems are :
The Rom :
- Didn't detect my saved contacts on both sim cards.
- Didn't have the same quality of image but it's not bad.
- The calculator app still more than 1 min to open ( something weird)!
- Battery usage looks perfect !
- The configurations in settings gives a lot of helpful things such as the customization of the notification panel and the power menu !
.
so what i did now is that i rooted with magisk and i installed ( Root explorer R ) pro version and installed ( System apps uninstall ).
i deleted ( Calculator,Camera,browser,messaging,music player,gallery.....etc) then i installed an Alternative for them. so now i have my customized RR V6.2.0
it's awesome with root. But for who installed this rom you can go to settings and find the display PPI ( you will find it about 400ppi ) i changed it up to 424ppi( the original A5 2017 ppi ) and now works perfectly .

Feedback RR-O-v6.2.0-20180925-a5y17lte-Unofficial
sheepkill15 said:
I don't know which version is good, I don't use it
Click to expand...
Click to collapse
Friend I've been with your rom for a few days and it's the BEST ROM OF EVERYTHING! I say this in a matter of customization and having a purest experience that samsung ...
I have an A520F (two-chip model) and both are OK.
The problem is that it has some really annoying bugs as a problem to play media (especially songs that get squeaked and at first I was worried if my headphones had damaged), also has bugs in the camera that seem to limit their quality a lot, bugs in the interface in general that make the device reboot out of nowhere (it happened to me 1 or 2 times during the time I am with the rom on the device [4 days]), bugs on the physical buttons as previously said, among others ... These were the most important bugs I had with rom.
I have some suggestions for interesting implementations to make in the rom like stereo audio (it has this function in Hades), just leave the pixel launcher more notifications optimization on the always on display and one good thing I believe developers should do is provide a form of install a separate galaxy s9 camera package that is present in rom Hades for all roms.
You are doing a good job and good luck for more projects in the future. I'll probably record a YouTube video about your future rom and give you the credits.

[ROM][OFFICIAL] LineageOS 16.0 for S3NEO

Hi there,
If you haven't heard it already, we have official support now and Q is coming too.
links:
https://wiki.lineageos.org/devices/s3ve3gjv
https://wiki.lineageos.org/devices/s3ve3gxx
credits:
francescodario
me
LineageOS
Klte dev team (you guys rock)
Sources: www.github.com/LineageOS/android_device_samsung_s3ve3gxx

Deleted

Tested, works really well! Good job! Even the battery usage is great. It's smoother compared to 7.1.
As it's pointed out, Gapps breaks RIL. Everything else works except radio and offline charging. Installed Aurora Store and I'm pretty happy with it.
Things I tested:
☑ RIL
☑ Camera Front/Back
☑ Video Recording
☑ Bluetooth
☑ WiFi
☑ Sound
☑ GPS
☑ Calls
☒ Offline Charging, it loops.
☒ Radio, phone freezes.

@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)

Humaxxx said:
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Click to expand...
Click to collapse
I see the white lines, they're sporadic but they're there only with 1080p.

HI
My findings so far: All things mentioned above are working for me as well, but with some exceptions:
GPS finds plenty of satelites, but doesn't snap in ( no position..).
Battery- charging freezes once, I had to reboot to go on.
In Whatsapp recorded video-sequences aren't playable ( frozen screen or artefacts..)
I couldn't find any menue to choose the touchscreen - triangles for moving the cursor in a text document.
I'm looking forward the next Version....:fingers-crossed:

Just tested this rom on my GT-I9301I for an hour or so and i have to say that auto-rotation doesn't work sometimes, also i don't know what exactly RIL is but i installed the gapps aroma (customized) and didn't realize any issue related to gapps until now, and also i got a new phone recently so the old phone doesn't have a sim card anymore, and i don't plan to put one on my GT-I9301I, so my old phone is somewhat like a test device now, i have tried some custom roms before but i didn't like them too much, this one doesn't look bad, except i wish you could do something about offline charging.

Error: this package is for device
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?

Koksnuss said:
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Click to expand...
Click to collapse
You have to use a newer Version of TWRP:
https://dl.twrp.me/s3ve3g/

I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.

JaadiBooti said:
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
Click to expand...
Click to collapse
Deleted

another useless ROM, we arrived at 10, or 15?

mariocaraf said:
another useless ROM, we arrived at 10, or 15?
Click to expand...
Click to collapse
Deleted

He didn't work he remained stuck
Please Help

Waiting for an edititon for Sony sensor! On Sony sensor not works camera and flashlight, but rom is usable as daily driver.
Auto-rotate is working in YT Vanced and other apps only sometimes.
This is very cool ROM, better than Nougat!

ayochan said:
He didn't work he remained stuck
Please Help
Click to expand...
Click to collapse
If it gets stuck, you are probably running an outdated firmware. Get the latest from Sammobile or check the Telegram group. You will need Odin or Heimdall to install it. Be careful which firmware you are burning, it can brick your device if it's the wrong one.

For more than an hour it is stuck in the installation screen

Humaxxx said:
You have to use a newer Version of TWRP
Click to expand...
Click to collapse
thanks, that worked perfect! I also like that encryption works

Just bought my a new Evo 860 ssd so I have enough storage for building multiple devices . So yes more build coming this week for Sony and dual SIM.
My 300gb ssd before didn't quite had enough.

Hi Thargorsson,
First of all. Excellent work on the new ROM!
I have just got a hold of 5x S3 NEO and wished they had a newer version than 4.4.2.
After some searches on Google I found this forum. I'm going to wait until you have an updated version of this ROM.
Please keep us all posted on any progress
Cheers,
Steve

Development [ROM][13][ENCRYPTION] Official LineageOS 20 for A72

Link to original thread: A52 4G forum

Updated to Lineage 19.0!

Hey man! Everything is working great as far as I can see right now. Only one big drawback is the fingerprint scanner not working on Galaxy A72. It's not that it's registered and then it's failing. You can't even register it sadly.
Any fixes soon? Or is there a workaround which I am supposed to do, that I don't know about?
Thanks!

nadtonii1 said:
Hey man! Everything is working great as far as I can see right now. Only one big drawback is the fingerprint scanner not working on Galaxy A72. It's not that it's registered and then it's failing. You can't even register it sadly.
Any fixes soon? Or is there a workaround which I am supposed to do, that I don't know about?
Thanks!
Click to expand...
Click to collapse
Sorry, sadly I only own A52 which makes it really hard for me to fix it on A72.

Simon1511 said:
Sorry, sadly I only own A52 which makes it really hard for me to fix it on A72.
Click to expand...
Click to collapse
There are some suggestions.
Google Camera does not start, crashes. On GSI it helped to turn on the vendor Q.
In the screen settings, can you add a graph of picture saturation settings?
And is it possible to add a system backup to Lineage Recovery?

Realees56 said:
There are some suggestions.
Google Camera does not start, crashes. On GSI it helped to turn on the vendor Q.
In the screen settings, can you add a graph of picture saturation settings?
And is it possible to add a system backup to Lineage Recovery?
Click to expand...
Click to collapse
1. Which version of GCam? BSG works fine for me.
2 & 3: No, such features don't exist.

Simon1511 said:
1. Which version of GCam? BSG works fine for me.
2 & 3: No, such features don't exist.
Click to expand...
Click to collapse
Also BSG
Is it by any chance due to the rise kernel?

Realees56 said:
Also BSG
Is it by any chance due to the rise kernel?
Click to expand...
Click to collapse
No, it shouldn't be related to the kernel.
I'll investigate soon.

Simon1511 said:
No, it shouldn't be related to the kernel.
I'll investigate soon.
Click to expand...
Click to collapse
Of course it's a pity lineage recovery won't have a backup function, it's inconvenient to flash twrp every time.
And the colour saturation setting as on oneui is missing. I don't understand why you chose LOs, there's nothing in it at all, you can't even choose colours in styles. I was sitting on GSI 12A CrDroid before your firmware, great firmware in terms of customization. Never used google services. Never used google services.
Unfortunately when upgrading to GSI v402 the phone is extremely hard to start. About 8 times on reboot out of 10, 8 times caught bootloop. And this is on any v402 firmware.
In any case your firmware is better, even without having to patch separately the boot for magisk in order to run it on 12A GSI

Realees56 said:
Of course it's a pity lineage recovery won't have a backup function, it's inconvenient to flash twrp every time.
And the colour saturation setting as on oneui is missing. I don't understand why you chose LOs, there's nothing in it at all, you can't even choose colours in styles. I was sitting on GSI 12A CrDroid before your firmware, great firmware in terms of customization. Never used google services. Never used google services.
Unfortunately when upgrading to GSI v402 the phone is extremely hard to start. About 8 times on reboot out of 10, 8 times caught bootloop. And this is on any v402 firmware.
In any case your firmware is better, even without having to patch separately the boot for magisk in order to run it on 12A GSI
Click to expand...
Click to collapse
If you're unhappy with lineage feel free to build any other ROM on your own, the device trees are all on my Github.

friend! please don't stop developing this system, it's the best I could find for me a72, as soon as I can I'll send support through paypal

¿Funciona en Samsung A71?
Translated by GT: Does it work on Samsung A71?

usuario888 said:
¿Funciona en Samsung A71?
Translated by GT: Does it work on Samsung A71?
Click to expand...
Click to collapse
No. As the thread says, this is exclusively for A52 4G and A72.

Is this Rom still in development I have the A72 4G. Want to load the custom OS

GoldenJet said:
Is this Rom still in development I have the A72 4G. Want to load the custom OS
Click to expand...
Click to collapse
Yes, it is.

tried this rom its quite unstable loads of issues, still its the only rom at the moment. I reverted to stock.
Ok this was posted in haste and a bit in irritation what I meant is simply this is not useable as stable rom,
Its unstable and has issues. This is not meant as a revieuw or judgement of said rom. Its the first and currently only one avalible and kudo's to the creator. Its listed as development. Its just a quick feedback for those like me that just like to know if its stable or not.

Spacecabbie said:
tried this rom its quite unstable loads of issues, still its the only rom at the moment. I reverted to stock.
Click to expand...
Click to collapse
Would you mind telling me about the issues you experienced?
From my point of view (and from what others told me) it runs pretty stable and mostly bugless on both A52 and A72.

I have it running for weeks now as second device. Only real issue is fingerprint sensor and camera, could not find any gcam mod that would work properly. Apart for it - runs stable.

Simon1511 said:
Would you mind telling me about the issues you experienced?
From my point of view (and from what others told me) it runs pretty stable and mostly bugless on both A52 and A72.
Click to expand...
Click to collapse
Sorry Muyst have missed this,
Also edited initial post cause it was imho blunt and to negative. Sorry about that I have nothing but respect for mod creators.
I din't extensivly test but:
Vingerprint reader but this was known.
I had some screen issues (swiping up from bottem wouln't work so couln't close apps.
pixel launcher kept crashing (yes this might not be rom related but nova launcher also had issues)
General instability possibly all related to screen.
There where some other issues but as said my intention was not to extensivly screen it the above combined with the other small issues made me decide to remove it again.

I was using lineage os 19 in my Samsung Galaxy A72. It's better than pixel plus ui rom. It has 90hz screen refresh rate. But this rom has the following bugs also:
1. Proximity sensor not working at all;
2.Fingerprint or face unlock not working;
3. No safety net pass.