Develop Bugs

OREO Update ?

Has anyone here on Verizon gotten the OREO update or do we know if Verizon is included in the beta testing? I have seen that only the SM-G955U1 firm wares have received it. Just wondering and looking for info.

You'd need to flash the unlocked firmware to get the beta.

Ive read that the beta is going to Sprint and T-Mobile only US wise...unless you register from the unlocked firmware I guess. But there may be a way to get it on verizon if they pull the update before it installs.

I read that in the US it was only Sprint and T-Mobile, and the rest of the world had to be on unlocked firmware.

Sir_Eagle said:
I read that in the US it was only Sprint and T-Mobile, and the rest of the world had to be on unlocked firmware.
Click to expand...
Click to collapse
Ya I tried the unlocked firmware and still did not get it, must have been to late.

Everyone, all you need to do to get the beta, on ANY us s8 or s8+
1. Odin QG1
2. Apply QG1 To QGL ota (stock recovery)
3. Apply oreo beta aka QGL to ZQJJ (stock recovery)
That's it. Proven. Confirmed. Fool proof.

muppetmaster916 said:
Everyone, all you need to do to get the beta, on ANY us s8 or s8+
1. Odin QG1
2. Apply QG1 To QGL ota (stock recovery)
3. Apply oreo beta aka QGL to ZQJJ (stock recovery)
That's it. Proven. Confirmed. Fool proof.
Click to expand...
Click to collapse
Thanks but is that QG1 0r QGI, don't see QG1. and where did you find Oreo beta?

mopartonyg said:
Thanks but is that QG1 0r QGI, don't see QG1. and where did you find Oreo beta?
Click to expand...
Click to collapse
You need to get on QGL. Then apply the beta which is ZQJJ. But it's an update, only works from QGL. All of the files are in the att s8 and s8+ thread.
https://forum.xda-developers.com/att-galaxy-s8+/how-to/looking-brave-people-to-try-t3699352/page14

muppetmaster916 said:
You need to get on QGL. Then apply the beta which is ZQJJ. But it's an update, only works from QGL. All of the files are in the att s8 and s8+ thread.
https://forum.xda-developers.com/att-galaxy-s8+/how-to/looking-brave-people-to-try-t3699352/page14
Click to expand...
Click to collapse
Ok thanks, once on ATT Oreo is there a way to get back to Verizon firmware but still on Oreo? Thanks for all your help and answers.

Is there root for samsung android oreo yet?

muppetmaster916 said:
You need to get on QGL. Then apply the beta which is ZQJJ. But it's an update, only works from QGL. All of the files are in the att s8 and s8+ thread.
https://forum.xda-developers.com/att-galaxy-s8+/how-to/looking-brave-people-to-try-t3699352/page14
Click to expand...
Click to collapse
@ muppetmaster916 Just noticed you are on ATT, why do you think this will work for Verizon?

mopartonyg said:
@ muppetmaster916 Just noticed you are on ATT, why do you think this will work for Verizon?
Click to expand...
Click to collapse
I got this to work on my Verizon Galaxy s8+. You need to install unlocked firmware and the Odin Verizon userdata file, then use Odin to install the at&t QG1, then adb update to the right QG1, then adb install QJJ. Then you are done, and you will have all the Verizon bloat, including wifi, video, and hd calling.
Edit: I also added a screenshot showing that I am on Oreo, and that my service provider is Verizon.

It works for all US s8 and s8+

Shaggy_thecat said:
I got this to work on my Verizon Galaxy s8+. You need to install unlocked firmware and the Odin Verizon userdata file, then use Odin to install the at&t QG1, then adb update to the right QG1, then adb install QJJ. Then you are done, and you will have all the Verizon bloat, including wifi, video, and hd calling.
Edit: I also added a screenshot showing that I am on Oreo, and that my service provider is Verizon.
Click to expand...
Click to collapse
What do you mean the right QG1? and why to the ATT QG1 after the unlocked flash? Thought we needed to be on AQGL?

mopartonyg said:
What do you mean the right QG1? and why to the ATT QG1 after the unlocked flash? Thought we needed to be on AQGL?
Click to expand...
Click to collapse
I wasn't able to go to ATT QG1 with Verizon firmware installed, so I had to go to unlocked G955U1 fimwere then flash ATT G955USQS1AQG1, the adb update to ATT G955USQU1AQG1 and then adb update again to QJJ.
There are two different AQG1 builds, you need to be on QU1AQG1 not QS1QG1 to install the Oreo QJJ update via adb.

I heard you could just flash the unlocked firmware and use a Verizon sim. Nothing extra, info is posted on Galaxy S8 reddit

Ok I was on Verizon AQJA, odin back to Verizon AQGL and then flashed the ATT oreo update and ended up with all the Verizon bloat and everything in settings saying Verizon. Here is the link to the ATTS8+ thread. https://forum.xda-developers.com/att-galaxy-s8+/how-to/looking-brave-people-to-try-t3699352/page14. Thanks to @muppetmaster916 for the info.

mopartonyg said:
Ok I was on Verizon AQJA, odin back to Verizon AQGL and then flashed the ATT oreo update and ended up with all the Verizon bloat and everything in settings saying Verizon. Here is the link to the ATTS8+ thread. https://forum.xda-developers.com/att-galaxy-s8+/how-to/looking-brave-people-to-try-t3699352/page14. Thanks to @muppetmaster916 for the info.
Click to expand...
Click to collapse
I did the same. Seems good so far
Sent from my SM-G955U using Tapatalk

What's the difference between Oreo and nougat?
Sent from my SM-G955U using XDA-Developers Legacy app

Galaxy tab s4 Att stock firmware .

Very helpfull if have verizon tablet and need it to work with att
https://drive.google.com/file/d/1Qg1PH5YbUzkuSUljP96ioomAgmMsLVRs/view

odin
torreon901 said:
Very helpfull if have verizon tablet and need it to work with att
https://drive.google.com/file/d/1Qg1PH5YbUzkuSUljP96ioomAgmMsLVRs/view
Click to expand...
Click to collapse
flash with odin 3.1 from sammobile

torreon901 said:
Very helpfull if have verizon tablet and need it to work with att
https://drive.google.com/file/d/1Qg1PH5YbUzkuSUljP96ioomAgmMsLVRs/view
Click to expand...
Click to collapse
Can this be used to downgrade from 9.0? (Not that anyone would want to except maybe to update from scratch)
*im on the 837A btw

Hello
My Samsung Tab S4 is currently locked to Verizon will this unlock the SIM to AT&T?
Downloaded file but unable to Unzip file shows corrupt
Thanks

N975F-DS firmware for USA on T-mo

Hey all. Having a "duh" moment. Which firmware do I download for an unlocked N975F-DS for use in the USA on T-Mobile?
I don't see USA in the Samsung list of firmware for this device.
Thank you!

Stick to whatever you have or the XAA firmware if that's what's its still called. There's no T-Mobile FW for the N975F, you have the Exynos model, the firmware for T-Mobile is snapdragon based and will end up bricking your device if you install it.

Thank you, minhajmsd. I should have been more clear. I want to root using Dr. Ketan's method, and I firmware download is "required".
"How to root Note10/Note 10+ & Flash TWRP (Exynos only)"
Are you saying to find the same FW that's on it now and use that?
And, should I change the CSC file to the T-Mobile one?
Thank you again. I'm out of the loop.....

Pinan said:
Thank you, minhajmsd. I should have been more clear. I want to root using Dr. Ketan's method, and I firmware download is "required".
"How to root Note10/Note 10+ & Flash TWRP (Exynos only)"
Are you saying to find the same FW that's on it now and use that?
And, should I change the CSC file to the T-Mobile one?
Thank you again. I'm out of the loop.....
Click to expand...
Click to collapse
If it's T-Mobile US in CSC go for it, last time I was able to root was with the note8 and I remember going for the XAA one, at the time I don't think there was a T-Mobile US one.

I have the Note 8 as well, rooted. Great phone. Just thought I needed a change, and give my daughter the 8.
I'll double check in the dr.ketan thread as well.
Thanks again.

SM-G988W flash?

Hi folks, I came across several posts mentioning cross compatibility between the U and the U1 variants. I have a Samsung Canada bought unlocked Ultra with the 988W code. Since its a unlocked snapdragon version, could someone please let me know if I can use ODIN and flash the latest snapdragon compatible firmware or are there any restrictions? I am using the device in Canada with a Canadian sim, however the super delayed updates here have been beyond frustrating!
All help is appreciated.
Regards
tj

Works fine. You can flash latest TMB ATE6 to it. Use Home CSC to maintain your current data.

Thanks!
shollywood said:
Works fine. You can flash latest TMB ATE6 to it. Use Home CSC to maintain your current data.
Click to expand...
Click to collapse
I did exactly what you suggested and worked like a charm. Cheers :good::highfive:

tjugpal said:
I did exactly what you suggested and worked like a charm. Cheers :good::highfive:
Click to expand...
Click to collapse
Cool! Don't forget to clear data and cache on the camera app also.....

Hello
I also bought an S20 ultra G988w directly from samsung so it is unlock
I would also like to upgrade to the latest ATE6 firmware but I don't understand your information for "TMB ATE6 to it information. Use Home CSC to maintain"
Where is this TMB ate6?
thank you

Seriously...what kind of thumbnail is that?????
Sent from my [device_name] using XDA-Developers Legacy app

ac1dl0rd said:
Hello
I also bought an S20 ultra G988w directly from samsung so it is unlock
I would also like to upgrade to the latest ATE6 firmware but I don't understand your information for "TMB ATE6 to it information. Use Home CSC to maintain"
Where is this TMB ate6?
thank you
Click to expand...
Click to collapse
TMB is T-Mobile
ATE6 is the last four characters of the latest firmware ie (PDA: G988USQU1ATE6 CSC: G988UOYN1ATE6)
Home CSC is a flash option in ODIN to maintain your data instead of factory reset

Eejcloud said:
TMB is T-Mobile
ATE6 is the last four characters of the latest firmware ie (PDA: G988USQU1ATE6 CSC: G988UOYN1ATE6)
Home CSC is a flash option in ODIN to maintain your data instead of factory reset
Click to expand...
Click to collapse
Thank you for your reply
No problem to flash with T-mobile (G988U) for G988w canada ?

Wish I found out about this sooner. Just flashed my S20 (981W) to 981U and it seems to work great. Also as a bonus the disable shutter sound option now shows in the camera settings.
I flashed the t-mobile (TMB) firmware using AP_G981UXXXX, BL_G981UXXXX, CP_G981UXXXX and HOME_CSC_OMC_OYN_G981UXXXX.

Eejcloud said:
TMB is T-Mobile
ATE6 is the last four characters of the latest firmware ie (PDA: G988USQU1ATE6 CSC: G988UOYN1ATE6)
Home CSC is a flash option in ODIN to maintain your data instead of factory reset
Click to expand...
Click to collapse
maydax said:
Wish I found out about this sooner. Just flashed my S20 (981W) to 981U and it seems to work great. Also as a bonus the disable shutter sound option now shows in the camera settings.
I flashed the t-mobile (TMB) firmware using AP_G981UXXXX, BL_G981UXXXX, CP_G981UXXXX and HOME_CSC_OMC_OYN_G981UXXXX.
Click to expand...
Click to collapse
thank for your reply
Did you lose the Samsung Pay and some other functions etc by installing the G988U firmware vs the G988W?

ac1dl0rd said:
thank for your reply
Did you lose the Samsung Pay and some other functions etc by installing the G988U firmware vs the G988W?
Click to expand...
Click to collapse
I had to setup samsung pass again but it downloaded all my saved passes afterwards. Samsung pay seems to work with no errors. Same with samsung health.

Will this work with any SM-G988W (i.e. bought through a carrier)? I know in Canada all cell phones must be unlocked by law so I'm wondering if there is any difference vs one purchased directly through Samsung.
Update:
I pulled the trigger and loaded the T-Mobile ATE6 firmware on my Freedom Mobile purchased s20u phone with the home_csc option. As far as I can tell, everything is working as before (LTE, VoLTE, Wifi-calling).
Obviously YMMV, and make sure to backup beforehand.

Should work. All firmware is the same in Canada across all carriers from what I've seen.
https://samfw.com/firmware/SM-G988W
For the above link all carriers show G988WVLS1ATD3 having the same build date and md5 checksum (8955d9a2845891fe5c8b646b3835cddf) when you click on one of the links.

maydax said:
Should work. All firmware is the same in Canada across all carriers from what I've seen.
https://samfw.com/firmware/SM-G988W
For the above link all carriers show G988WVLS1ATD3 having the same build date and md5 checksum (8955d9a2845891fe5c8b646b3835cddf) when you click on one of the links.
Click to expand...
Click to collapse
It stresses me out a bit.
I want this ate6 update for the camera.
On the other topic of G988U and U1, he mentions that you have to flash with the version U1 ATE4 TMB first and then the ATE6 of U TMB
did you do that or did you go directly from g988wvls1atd3 to TMB ATE6U ??
with the HOME_CSC_OMC_OYN_G988UOYN1ATE6 without the userdata_tmb?
thank you

ac1dl0rd said:
It stresses me out a bit.
I want this ate6 update for the camera.
On the other topic of G988U and U1, he mentions that you have to flash with the version U1 ATE4 TMB first and then the ATE6 of U TMB
did you do that or did you go directly from g988wvls1atd3 to TMB ATE6U ??
with the HOME_CSC_OMC_OYN_G988UOYN1ATE6 without the userdata_tmb?
thank you
Click to expand...
Click to collapse
Finally, more fear than harm.
I did the update directly at TMB ATE6 with the Home CSC
without any loss of information and I am now with g988u summer with the last function of the camera.
It remains to do tests
Thanks everyone!

tjugpal said:
I did exactly what you suggested and worked like a charm. Cheers :good::highfive:
Click to expand...
Click to collapse
ac1dl0rd said:
Finally, more fear than harm.
I did the update directly at TMB ATE6 with the Home CSC
without any loss of information and I am now with g988u summer with the last function of the camera.
It remains to do tests
Thanks everyone!
Click to expand...
Click to collapse
Not sure what g988u summer and all that means, but you can flash directly with ATE6 and Home CSC if you want to keep your existing data, no problem at all.

thank u

any one know if the 9880 which is snapdragon can get the csc of 988w flashed?

dwhite011 said:
any one know if the 9880 which is snapdragon can get the csc of 988w flashed?
Click to expand...
Click to collapse
you can unlock bl on 9880 so it can be flashed.. whether it works or not i dunno

You folks should know that running a U or U1 fw in Canada makes you miss out on some carrier related features because the U and U1 are for USA. So LTE bands might be missing, WiFi calling, spam detection, Volte, etc...some or all of those features will be missing.
Sent from my iPad using Tapatalk

Question CAN F936U FLASH F936U1 Firmware?

hello,I want to F936U flash F936u1 Firmware,how can I do?

I'm absolutely sure that you can do that.
I have tried it yesterday and successfully changed the model.
But, you can't flash it via ordinary Odin. You have use a patched Odin which can be found in XDA and flash the u1 firmware in it.

1992595365 said:
我绝对确定你可以做到这一点。
我昨天试了一下，成功换了型号。
但是，你不能通过普通的 Odin 来刷机。您使用了一个可以在 XDA 中找到的修补过的 Odin，并在其中刷新 u1 固件。
Click to expand...
Click to collapse
thank you，i want to try

I bought TMobile. Can I use it on Verizon after CSC flash???

Can we also flash the U1 firmware to Canadian fold 4 f936w model?

zeeshee said:
Can we also flash the U1 firmware to Canadian fold 4 f936w model?
Click to expand...
Click to collapse
Should be able to:
Download link for One UI 5 Beta 1 2 3 and 4 Android 13 Guide+Links BETA FINISHED
THE BETA PROGRAM HAS FINISHED FOR ONE UI 5 ANDROID 13 THANKS FOR TAKING PART FINAL UPDATE WILL BE RELEASED WITHIN THE NEXT COUPLE OF WEEKS IF YOU WANT TO SIDELOAD IT NOW USE ODIN And here we are the One ui 5 Beta Android 13 for the Z FOLD 4...
forum.xda-developers.com
I'll probably be trying this myself in the next few days. Will update if I do.

Let me know once you do it. Thx.

Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)

aleunge said:
Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)
Click to expand...
Click to collapse
My kind sir would you mind me asking what would be your reason of flashing from 936u to 936w to 946u1 and who would be your carrier and did you expirence any network issues???
Thanks in advance

shorty9210 said:
My kind sir would you mind me asking what would be your reason of flashing from 936u to 936w to 946u1 and who would be your carrier and did you expirence any network issues???
Thanks in advance
Click to expand...
Click to collapse
Hey shorty I bought it used with U firmware and just to be safe to make sure it's stock and the fact U (and W) versions didn't get much updates, I flashed with the U1. Android 13 was released first for unbranded Canada XAC and since I'm actually using on Canadian networks, might as well. So far ok. No issues to report.

aleunge said:
Hey shorty I bought it used with U firmware and just to be safe to make sure it's stock and the fact U (and W) versions didn't get much updates, I flashed with the U1. Android 13 was released first for unbranded Canada XAC and since I'm actually using on Canadian networks, might as well. So far ok. No issues to report.
Click to expand...
Click to collapse
Well that's good to hear that makes sense then, so you are using it on a Canadian carrier??
I only as Cuz I have AT&T and I'm trying to figure out why mine has a completely different firmware then what sammobile shows what the at&t firmware is and my zfold4 is saying it's on the current firmware witch clearly tells me it's not!! oh does yours show the oem unlock btw
At&t z fold 4 SM-F936U or SM-F936U1
Hello all now I'm just confused so my zFold4 says it's the SM-F936U and I did the updates sense i figured if the US varients are not rootable as of now im just going to update it to the 13 update and after it up dated twice last night and it...
forum.xda-developers.com

aleunge said:
Ok I just flashed from U1 to a W ROM, specifically F936U1UES1AVJ1 (Android 12, XAA) to F936WVLU1BVK3 (13, XAC), and it all seems like it works fine. I'll update if I run into anything in the next few days.
Just a note that although it doesn't matter, it was originally a SM-F936U (updated to U1 then W)
Click to expand...
Click to collapse
Hey I have a question, in order to update to the W XAC, did you have to delete user data? Or were you able to update keeping your data. Thanks

shorty9210 said:
Well that's good to hear that makes sense then, so you are using it on a Canadian carrier??
I only as Cuz I have AT&T and I'm trying to figure out why mine has a completely different firmware then what sammobile shows what the at&t firmware is and my zfold4 is saying it's on the current firmware witch clearly tells me it's not!! oh does yours show the oem unlock btw
At&t z fold 4 SM-F936U or SM-F936U1
Hello all now I'm just confused so my zFold4 says it's the SM-F936U and I did the updates sense i figured if the US varients are not rootable as of now im just going to update it to the 13 update and after it up dated twice last night and it...
forum.xda-developers.com
Click to expand...
Click to collapse
Hey I'm not too sure if you mean this, but yes mine is factory unlocked (actually a dev/demo device). And yes on Canadian network. You can always flash with the newest ATT ROM if yours is from ATT but hasn't gotten updates. Just make sure it indeed is the right model.
andres.soler.s said:
Hey I have a question, in order to update to the W XAC, did you have to delete user data? Or were you able to update keeping your data. Thanks
Click to expand...
Click to collapse
I did not keep user data so not sure if you can or should. But I think if you're switching model/CSC, the general consensus is to do a clean flash. If you just want to enable Canadian bands that are disabled on a US device, you can search up a way to do so I think using engineering mode.

aleunge said:
Hey I'm not too sure if you mean this, but yes mine is factory unlocked (actually a dev/demo device). And yes on Canadian network. You can always flash with the newest ATT ROM if yours is from ATT but hasn't gotten updates. Just make sure it indeed is the right model.
I did not keep user data so not sure if you can or should. But I think if you're switching model/CSC, the general consensus is to do a clean flash. If you just want to enable Canadian bands that are disabled on a US device, you can search up a way to do so I think using engineering mode.
Click to expand...
Click to collapse
Okie dokie sounds good I'm just looking into it and noticed all varients have a similar codes and my pituitary one has the firmware matching the MetroPCS firmware but the only firmware that I have found for at&t comes up as the smf936u1 at least on sammobile I suppose I'll have to check other firmware sites thanks for the reply hope you are having a wonderful day

shorty9210 said:
Okie dokie sounds good I'm just looking into it and noticed all varients have a similar codes and my pituitary one has the firmware matching the MetroPCS firmware but the only firmware that I have found for at&t comes up as the smf936u1 at least on sammobile I suppose I'll have to check other firmware sites thanks for the reply hope you are having a wonderful day
Click to expand...
Click to collapse
If you're on any of the U or U1 firmware, I think you can safely flash to any other U/U1 without any issues. I usually cross reference with samfw and Frija too. Have a wonderful day too friend.

Would this enable Sim for phones without it? The SM-F9360 does not have esim support, could be software, I hope.

Can i go from U to W and then root? Or not possible?

Can I go from ATT and flash TMO variant if the model number is the same? SM-F936U? The phone is unlocked FYI. [email protected]