Hi
I am facing some problems with magisk
Sometimes I reboot my device magisk stop working,, to fix that error I have to go to revovery mode and reboot twrp recovery .
But now,, for going to recovery mode I have to plug mobile in pc every time and then recovery mode appears.
I don't want to use pc every time for going to custom recovery.
_Ankit_Chahar said:
Hi
I am facing some problems with magisk
Sometimes I reboot my device magisk stop working,, to fix that error I have to go to revovery mode and reboot twrp recovery .
But now,, for going to recovery mode I have to plug mobile in pc every time and then recovery mode appears.
I don't want to use pc every time for going to custom recovery.
Click to expand...
Click to collapse
just always reboot to recovery
if you reboot normally, you will lose root and custom recovery
Related
Hey guys , it seems that my mobile recovery became not alright , I tried to flash twrp recovery to install dn3 v5+ with 4.4 bootloader , so I updated my note 2 to 4.4 via OTA and after I update it I downloaded twrp 2.7.0.2 and flashed it through odin it gave me pass! , that's seem good until this moment I tried to enter the recovery and I was surprised that the recovery wasn't installed and it gaved me no command and tried to reboot gives me error and then it reboots , I tried to reinstall the recovery and it gives me RESET instead of PASS on odin and nothing happens and also in downloading mode it gives me knox void : 1 , so can I do to fix my recovery firstly and then flash the dn3 rom ?
Abdo Taha said:
Hey guys , it seems that my mobile recovery became not alright , I tried to flash twrp recovery to install dn3 v5+ with 4.4 bootloader , so I updated my note 2 to 4.4 via OTA and after I update it I downloaded twrp 2.7.0.2 and flashed it through odin it gave me pass! , that's seem good until this moment I tried to enter the recovery and I was surprised that the recovery wasn't installed and it gaved me no command and tried to reboot gives me error and then it reboots , I tried to reinstall the recovery and it gives me RESET instead of PASS on odin and nothing happens and also in downloading mode it gives me knox void : 1 , so can I do to fix my recovery firstly and then flash the dn3 rom ?
Click to expand...
Click to collapse
First of all you should have used philz recovery version 6.25. or 6.41 if you are flashing the recovery for first time on stock ROM.(TWRP is known to give issues when flashing it over stock recovery).Download the latest philz from this LINK.before doing all this place superSu v1.99 in your external sd card of your phone you'll need it later.Put your phone into download mode.Open odin,connect your phone to odin.wait for the port id to lit up, uncheck AUTOReboot in odin.Next tick mark the AP/PDA option in odin and browse to select the downloaded philz file from above link.Then click start and let odin do it's thing.Once it says "pass" unplug the phone from laptop/pc pull the battery out the phone so it can turn off .wait few seconds put the battery back in then enter recovery mode manually by pressing and holding the volume up+home+power button and let go of all 3 buttons as soon as you see samsung note 2 logo ,wait around 10 seconds or so for philz to load.Then go to install zip select sd card 1 philz will freeze for a moment and then show main menu again, do the same go back to install zip , click on storage sdcard 1(external sd card) find the superSu v1.99 that you downloaded earlier and click on it and press yes on next screen and let it flash.Now use the back button and go back to main menu,go to power then click on reboot system.Now your phone is rooted and superSu will ask to disable Knox press ok/yes and you are done.
SuperSu V1.99
Anyone still have that old Philz recovery?? I'm trying to upgrade my mother in-law's Note 2 to CM13... ugh
Use twrp as cwm and Philz have not been updated for a long time.
I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Dishagra said:
I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Click to expand...
Click to collapse
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Not Working for me
RajGopi said:
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Click to expand...
Click to collapse
I am afraid this solution doesn't work for me. My thoughts are that I have somehow lost my recovery partition. I accidently installed CM 11 without first installing a custom recovery. My bad! but have yet to find a solution that works.
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Solved
Shahi00 said:
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Click to expand...
Click to collapse
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Waxwrong said:
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Click to expand...
Click to collapse
i have the same problem how to solve it please describe it briefly ^^
I Debricked my I9192
now i have download mode only
and it can't flash official rom or custom recovery
when my device reboot after succed Flashing in odin it keeps restarting
when i tried to get in twrp it shows the logo only and restart
when i tried to flash cwm recovery still Twrp and can't get into it
Click for whole story
wish somebody help me
i have htc m10 i need twrp i try this twrp-3.0.2-6-pme.img and this twrp-3.0.2-3-pme.img but both not working in my phone come from china its china region phone phone working fine but no playstore i want play store or any custom install in this phone but twrp not working phone is s on but bootloader unlocked plz help
ahmerp said:
i have htc m10 i need twrp i try this twrp-3.0.2-6-pme.img and this twrp-3.0.2-3-pme.img but both not working in my phone come from china its china region phone phone working fine but no playstore i want play store or any custom install in this phone but twrp not working phone is s on but bootloader unlocked plz help
Click to expand...
Click to collapse
How are you trying to flash twrp?
i flash twrp recovery with this command fastboot flash recovery twrp.img recovery send completed but when i click goto recovery mode in phone phone restart and and on in bootloader mode before flash twrp recovery phone going on offcial recovery
ahmerp said:
i flash twrp recovery with this command fastboot flash recovery twrp.img recovery send completed but when i click goto recovery mode in phone phone restart and and on in bootloader mode before flash twrp recovery phone going on offcial recovery
Click to expand...
Click to collapse
Do you mean you reach "download mode"?
Press power + vol down until you reach download mode, then choose reboot to bootloader, then from bootloader choose reboot to recovery.
Tell me what happens.
after chose reboot to recovery. phone restart and again show bootloader mode i click again reboot to recovery again same i think this recovery not match to my phone twrp-3.0.2-6-pme.img
ahmerp said:
after chose reboot to recovery. phone restart and again show bootloader mode i click again reboot to recovery again same i think this recovery not match to my phone twrp-3.0.2-6-pme.img
Click to expand...
Click to collapse
Can you take a picture and show us?
If you have Android N, twrp atm won't work!
Powered by HTC 10
Hello guys.
I'm facing a weird problem. I have a OP5T with bootloader unlock and when i flash a twrp.img(codeworks version) for the first time it flashed perfectly and boot into TWRP recovery. but when i want to reboot my phone again into recovery i loose the twrp and i get back to the Oneplus stock recovery.
Can anyone help me ?
Thanks for your help guys
AtZ SpeKtruM said:
Hello guys.
I'm facing a weird problem. I have a OP5T with bootloader unlock and when i flash a twrp.img(codeworks version) for the first time it flashed perfectly and boot into TWRP recovery. but when i want to reboot my phone again into recovery i loose the twrp and i get back to the Oneplus stock recovery.
Can anyone help me ?
Thanks for your help guys
Click to expand...
Click to collapse
Just flash magisk.zip with recovery and everything would be ok. So install now magisk.zip and after that go to twrp and flash and you're done.
1. Flash recovery via PC
2. After flash recovery unplug cable than MANUALY (dont use pc command in cmd!!!!) restart into recovery (in fastboot use volume +/- button)
3. Flash Magisk
4. Reboot to recovery
5. Done