Develop Bugs

[NOUGAT] ab123321 kernel for Oneplus One

Hi all, now I'm going to present my own custom kernel for Oneplus One!
Feature list:
Compiled with Linaro GCC 6.2 ARM toolchain
kexec patch (Multirom support)
UV support
Working button longpress on wired headset
KCAL display control by savoca
Kernel Samepage Merging (KSM)
Simple Thermal driver by franciscofranco
Qualcomm's MPDecision hotplugging driver is replaced by Nvidia's CPUQuiet for better UX (backported 3.10 version)
CAF's CPU boost driver is replaced by sultanxda's cpu_input_boost driver
Tuned Interactive governor with franciscofranco patches (better freq scaling)
Custom camera blobs from OOS 3.x on any (almost) ROM!
Optimized Low Memory Killer (LMK)
Charging current control by boeffla
QoS patches from Linux 3.10 kernel
Optimized FSync algorithm and ability to disable it <-- Use with caution!
Many many other little adjustments (Over 660 changes have been made to the kernel source!)
Anykernel installation
Very smooth UI
Almost full KA support (WiP)
I've forgotten much, you can check my source on Github
Installation:
Download latest kernel and camera blobs zips (you have to flash blobs only once or after ROM reflash)
Reboot recovery
Flash them
Reboot
Contact me:
If you found any bugs/something doesn't work or you have feature request, contact me in Telegram group
Downloads:
Bacon (OOS 3.x blobs): link
Credits:
franciscofranco, flar2, eng.stk, arter97, sultanxda, lord boeffla and many other people: for contributing to Android kernel development
jcadduono for lazyflasher
@KalilDev for making template for this post because I'm lazy ass very busy
XDA:DevDB Information
ab123321 kernel, Kernel for the OnePlus One
Contributors
ab123321
Source Code: [url]https://github.com/ab123321/android_kernel_oneplus_one/[/URL]

FAQ:
Q: What should I flash first: blobs or kernel?
A: It doesn't matter
Q: Which ROMs are supported?
A: Nougat ROMs with CM kernel are supported. It's most of ROMs for Oneplus One (LOS, AICP, RR etc).
Q: I have issues!
A: Flash ROM => flash SuperSU/Magisk (optionally) => flash needed kernel and blobs
Q: I sill have issues!
A: Take logcat and kmsg and send me in PM (Telegram preferred)
Q: I flashed my favorite Boeffla kernel and camera stopped working! Help!
A: If you want properly working device with custom blobs, flash this kernel, not any other (except it is mentioned by kernel author).

Changelog:
4_2 (09.03.2017) - Simple GPU Algorithm is replaced by Adreno idler, switched from Anykernel to lazyflasher, performance improved much (battery may drain). Now you can flash kernel on ROM with sultanxda camera HAL
3 (17.02.2017) - sultanxda version of blobs is dropped, added lionheart governor, fully reworked default performance profile (better performance and battery life), default read ahead size is 512KB by default
2_1 (06.02.2017) - Little adjustments to sultanxda version (both kernel and blobs zips updated), no need to update if you're currently on beta2. Alpha2_1 version of OOS blobs
beta2 (01.02.2017) - SELinux is set to Permissive mode by default to fix most of camera problems; updates from LineageOS; some charging fixes
beta1 (26.01.2017) - Initial Release

Finally the magic begins.

The magic is out!
Good job

Interesting. So you're saying you can flash this kernel on any ROM and have SultanXDA's camera HAL?

Claudiosvs said:
Interesting. So you're saying you can flash this kernel on any ROM and have SultanXDA's camera HAL?
Click to expand...
Click to collapse
You are right

Do I need to flash sultan blobs separately on lineageos??

Thanks for this mileage.
Installed both zips over the latest resurrection remix 7.1.1 and unfortunately the camera keeps crashing when trying to take photos and videos. Tried with the main and secondary camera and also with flash on and off.
Also saw that 1080p and 2.5k video recording of the secondary camera is not present, so i guess is still a WIP
Logcat after the issues: https://drive.google.com/file/d/0B25zhqsy3xaYSHNQOGd1T1dkaEE/view?usp=drivesdk
Kernek log: https://drive.google.com/file/d/0B25zhqsy3xaYZjFhbEhnQ01CdFU/view?usp=drivesdk

Does this kernel have uv support?

mustang_ssc said:
Thanks for this mileage.
Installed both zips over the latest resurrection remix 7.1.1 and unfortunately the camera keeps crashing when trying to take photos and videos. Tried with the main and secondary camera and also with flash on and off.
Also saw that 1080p and 2.5k video recording of the secondary camera is not present, so i guess is still a WIP
Logcat after the issues: https://drive.google.com/file/d/0B25zhqsy3xaYSHNQOGd1T1dkaEE/view?usp=drivesdk
Kernek log: https://drive.google.com/file/d/0B25zhqsy3xaYZjFhbEhnQ01CdFU/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks! Until I fix this, try to use ut with SELinux Permssive. 1080p and 2.5k formats support is on ROM side

Anyone with official LineageOS? Results? Haha

Gawd said:
Anyone with official LineageOS? Results? Haha
Click to expand...
Click to collapse
It works fine.
Fatsodonkey said:
Does this kernel have uv support?
Click to expand...
Click to collapse
No.
Btw, turn on permissive so that it can save pictures/not crash.

f41lbl0g said:
It works fine.
Click to expand...
Click to collapse
Including the camera? Like literally sultanxda's?

Gawd said:
Including the camera? Like literally sultanxda's?
Click to expand...
Click to collapse
Yes, its literally magical but it works. Try it for yourself.

Awesome kernel, great battery and slick performance.

So this is it. A prophetic hero who would arise to port Sultan's kernel works to Nougat.
Guess I'm keeping my OPO for another year.

flashed the kernel
also flashed the sultan camera libs, no camera crash experienced, so far great, i cant tell the difference though

Hey! Is this a caf kernel?

cudi90 said:
Hey! Is this a caf kernel?
Click to expand...
Click to collapse
It's CM kernel

[EOL][KERNEL][OOS][HMP][EAS][4.4.162][CLANG 7.0.3] Reverse Flash v2.1

Introduction
Hello everyone, this is my personal continuation of the famous Flash Kernel by Nathan Chancellor for the OnePlus 5/T.
This kernel is made with a focus on performance, battery life and stability.
You got the choice between a HMP version and a EAS version of the kernel.
Hopefully you will enjoy it!
Important thread information!
If you got issues please provide a log.
If you got feature requests, just ask.
OT is allowed.
Flash instruction
On OOS stock kernel:
- Flash kernel zip
On custom kernel:
- Dirty flash stock rom
- Flash kernel zip
Features
Major features of both (HMP and EAS) kernels
- Up to date with OOS (Stable and Beta)
- Up to date with the latest stable Linux version
- Up to date with the latest CAF tag
- Mainline patches from Linux, focusing on bug fixes/security
- Mainline CFQ scheduler improvements
- Kernel hardening from CopperheadOS
- Disables dm-verity
- Several subsystems converted to use power efficient workqueues
- Accidental touch protection on hardware keys
- Backlight dimmer
- KCAL color control
- Sweep2sleep
- Sound control
- Wakelock blocker
- Latest WireGuard snapshot
- Westwood as the default TCP algorithm
- Built with a self compiled Clang 7.0.3 toolchain
- USB fast charge
- CPU Boost improvements
- Pixel2Oreo WiFi MOD v5 Stable included
- Wake Gestures
- Notification LED Control
EAS specific features:
- Schedutil governor
- Dynamic stune boost
HMP specific features:
- CPU input boost
- Devfreq boost
- Simple LMK
Downloads
Primary
Archive
Sources:
Kernel: https://github.com/crian/kernel_oneplus5
AnyKernel: https://github.com/crian/AnyKernel2
Credits and Thanks:
- @nathanchance for Flash and inspiration
- @osm0sis for AnyKernel2
- @Sultanxda for being a Dev
- @franciscofranco for having some nice stuff
- @RogerF81 for WiFi MOD
- @joshuous and @RenderBroken for EAS
- @azaidi for Adaptive Stune app
- and all the other amazing Devs out there
XDA:DevDB Information
[KERNEL][OOS 8.1.0 TREBLE][CLANG] Reverse Flash, Kernel for the OnePlus 5
Contributors
crian
Source Code: https://github.com/crian/kernel_oneplus5/tree/reflash
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2.1
Stable Release Date: 2018-10-25
Created 2018-09-13
Last Updated 2019-01-05

Misc
Adaptive Stune app
This app calculates the Dynamic stune boost on the EAS kernel for each activity you are running.
It optimizes battery drain while aiming for 60 FPS.
This a slightly modified version of @azaidi's work.
Instruction
- Install the apk
- Give access and su permission
- Settings are available via long-press shortcut
Download
AdaptiveStune.apk
Source
https://github.com/crian/AdaptiveStune

Great.. Will try out soon.. Hopefully will be as good as what Nathan put out.. Really sad he sold his oneplus 5.
Edit: does this include latest CAF updates?
Sent from my OnePlus 5 using XDA Labs

Is this unified by any chance?

persieghini said:
Is this unified by any chance?
Click to expand...
Click to collapse
Yes it's unified.

Custom support?

evanxyj said:
Custom support?
Click to expand...
Click to collapse
Nope. Currently only for OOS.

crian said:
Nope. Currently only for OOS.
Click to expand...
Click to collapse
Hi! Do you know whether this kernel exposes battery life / capacity information ? I recall when I had a 1+3t some kernels did that.

Added to the OnePlus 5 Index Thread here.

crian said:
Yes it's unified.
Click to expand...
Click to collapse
Sorry for the noob question but does unified mean 5 and 5T or single kernel could be flashed on both Stable and beta OOS for OP 5?

Sy1ar said:
Sorry for the noob question but does unified mean 5 and 5T or single kernel could be flashed on both Stable and beta OOS for OP 5?
Click to expand...
Click to collapse
It supports 5/T and stable/beta.

shadowstep said:
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thanks!

Nice to see a new kernel here. Wish you good luck

The kernel is running perfectly on Open Beta 18! Thank you very much for continuing the Flash kernel for OxygenOS ROMS.

@franciscofranco @nathanchance It would be awesome if users will download this kernel using FK Kernel...

crian said:
It supports 5/T and stable/beta.
Click to expand...
Click to collapse
Is this hmp or EAS? Gonna give it a try

@crian Seems promising.. Your kernel is actually on par with what @nathanchance put out..
Anyway do you include latest CAF updates as well?
Sent from my OnePlus 5 using XDA Labs

infatality said:
@crian Seems promising.. Your kernel is actually on par with what @nathanchance put out..
Anyway do you include latest CAF updates as well?
Click to expand...
Click to collapse
Latest CAF kernel.lnx.4.4.r27-rel and wlan driver are merged in.

Update to v1.1
Changelog
- Upstreamed to Linux 4.4.156
- CPU Boost improvement (Apps start faster on a cold launch)
- USB fast charge
- Upstreamed Android Binder
- Removed Dynamic SchedTune Boost (it is not very effective on a HMP kernel)
Download
Primary: https://raw.githubusercontent.com/crian/rf-zips/master/stable/ReverseFlash-OP5-v1.1.zip
Archive: https://github.com/crian/rf-zips/tree/master/stable
Commits: https://github.com/crian/kernel_oneplus5/commits/reflash

Thanks @crian! I've been waiting for something like this! Great to see someone's continuing Nathan's great work

[KERNEL][OOS][PIE][4.4.172][GCC 8.2.1] π-Kernel v4 [27-01-2019]

​
Introduction
Hello everyone, this is my personal kernel for the OnePlus 5/5T.
This kernel is made with a focus on performance, battery life and stability.
Please flash it only on OOS Pie!
Hopefully you will enjoy it!
Telegram Chat
Important thread information!
If you got issues please provide a log.
If you got feature requests, just ask.
OT is allowed.
Flash instruction
On OOS stock kernel:
- Flash kernel zip
On custom kernel:
- Dirty flash stock rom
- Flash kernel zip
Features
Major features
- Up to date with OOS Pie (Stable and Beta)
- Up to date with the latest stable Linux version
- Up to date with the latest CAF tag
- Mainline CFQ scheduler improvements
- Disables dm-verity
- CPU Boost improvements
- Interactive Gov. improvements
- Touchboost
- Wake Gestures
- Sweep2Sleep
- Backlight Dimmer
- Sound Control
- Wakelock Blocker
- USB Fast Charge
- Several subsystems converted to use power efficient workqueues
- Latest WireGuard snapshot
- Westwood as the default TCP algorithm
- Built with a self compiled GCC 8.2.1 toolchain
- ...
Downloads
Primary
Sources:
Kernel: https://github.com/crian/kernel_oneplus5
AnyKernel: https://github.com/crian/AnyKernel2
Credits and Thanks:
- @nathanchance for upstreaming
- @osm0sis for AnyKernel2
- @Sultanxda for being a Dev
- @franciscofranco for having some nice stuff
- and all the other amazing Devs out there
If you like my work and want to support me, buy me a coffee or two: Donate
XDA:DevDB Information
[KERNEL][OOS][PIE][GCC] Pi-Kernel, Kernel for the OnePlus 5
Contributors
crian
Source Code: https://github.com/crian/kernel_oneplus5/tree/9.0_Beta
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v5
Stable Release Date: 2019-01-27
Created 2019-01-06
Last Updated 2019-01-28

You are back. Awesome

meph02 said:
You are back. Awesome
Click to expand...
Click to collapse
I can only agree

Create a telegram group

rishabh1326 said:
Create a telegram group
Click to expand...
Click to collapse
You can't be serious right? ?

Did anyone else read [oop][sie]
Well I guess I just had an oopsie

rishabh1326 said:
Create a telegram group
Click to expand...
Click to collapse
Read the op!

Running great so far. I had one instance of the phone lagging for a couple seconds, but that hasn't occurred again. Great work!

Added to the OnePlus 5 Index Thread here.

Does this kernel give better battery life then stock

Will you build with eas too?

shadowstep said:
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thanks!

sleepwalking0593 said:
Does this kernel give better battery life then stock
Click to expand...
Click to collapse
I hope so! ?

CooperBrick said:
Will you build with eas too?
Click to expand...
Click to collapse
At the moment I have not planned that.

First of all, thanks for your work on this (still) awesome phone.
I'd like to try your kernel but I can't live without kcal control (night mode isn't enough for me), so I was wondering if it may be added one day or if there's no chance .
Not really asking to add it, but that's just to know if I should not waste my time, I hope you understand it in the correct way.
Have a nice day [emoji1360]
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk

J0kker said:
First of all, thanks for your work on this (still) awesome phone.
I'd like to try your kernel but I can't live without kcal control (night mode isn't enough for me), so I was wondering if it may be added one day or if there's no chance .
Not really asking to add it, but that's just to know if I should not waste my time, I hope you understand it in the correct way.
Have a nice day [emoji1360]
Envoyé de mon ONEPLUS A5000 en utilisant Tapatalk
Click to expand...
Click to collapse
I had kcal in a test build and the driver seemed to be broken.
But I can check this again.

Hello dev..
Thank you for the good work for me it works very fine.
I have a question plz.
why is it not possible to permanently turn off processors? The other thing the Boeffla kernel has is the ability to amplify the speakers louder, for example, to listen to music. your kernel does not have that rights.

Jakkomo77 said:
Hello dev..
Thank you for the good work for me it works very fine.
I have a question plz.
why is it not possible to permanently turn off processors? The other thing the Boeffla kernel has is the ability to amplify the speakers louder, for example, to listen to music. your kernel does not have that rights.
Click to expand...
Click to collapse
Hotplugging is a very bad idea on newer SoCs, such as our SD835, thus you shouldn't turn off any core anyways, that's why, there is no option for this.

Update to v2
Changelog
- Merged Linux 4.4.170
- Upstreamed cpufreq times
- Upstreamed sdcardfs
- Bluetooth improvements
- arm64 optimizations
- Switched to HZ 300
- Reduced kernel size
- Boot time improvement
- Fixed issues with Google Camera
AnyKernel2 changes:
- Adjusted read-ahead values
- Added some file permissions
Download
Direct
Commits: https://github.com/crian/kernel_oneplus5/commits/9.0_Beta

Anyone tested this kernel on theOne5Os rom based on OOS ?

[KERNEL] FASAK Custom Kernel [ beta: XX1]

This kernel supports ROMS based on Android 10-(Custom ROMS) only.
Fasak is aimed at smooth performance and longer battery life.
This kernel is GSI / AOSP only. Don't flash it on RUI based roms unless you are suicidal or want to lose some features, in which case you're free to do as you please and I'm free to ignore your posts, right?
Main features:
- Upstreamed to Linux 4.9.218
- Clang compiled
- Kcal and Klapse
- BLU_schedutil and Pixel governer
- Power Efficient Workqueue
- Switch to exfat file system for performance
- Spectrum profiles (soon)
- Flash and forget
- Boeffla wakelocks control
- Maple, Zen, Anxiety, DFQ (default) IO schedulers
- Wiregaurd supported
- Adrenoboost fine tuning Algorithm
CPU features:
- CPU Governors: Schedutil, blu_schedutil, Pixutil
- Schedutil updated with patches from newer Linux versions
- CPU idle improvements by kerneltoast
- CPU input boost
Network features:
- Westwood set as default TCP algorithm
- TTL
Other features:
- Wireguard
- Unused Drivers And Logging removed for a smaller image
Sources: link
Installation Instructions
1.) Download the kernel from here
2.) Dirty flash the kernel (this means flashing the kernel without wiping anything)[/SIZE]
XDA:DevDB Information
Fasak -Only_once, Kernel for the Realme XT
Contributors
Krishrocks, krishrocks, sagarmakhar, thesprintster
Source Code: https://github.com/saikrishnawanted/android_kernel_realme_sdm710
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2020-04-11
Created 2020-04-11
Last Updated 2020-04-15

TriedAntutu Benchmark
compared with Antutu stock custom rom kernel, gives a bit improved performance with very less battery drain.
Thanks Developer

congrats, now you may rest at peace sar. lol
Sent from my Realme XT using Tapatalk

Sar noice.batiful karnal sar. Love it

where is the 'Restore stock boot partition guide'
Thanks.

coldfear00 said:
where is the 'Restore stock boot partition guide'
Thanks.
Click to expand...
Click to collapse
Thats a typo, you can flash this on any custom rom Dirty. No wipe needed.:good:

Krishrocks said:
Thats a typo, you can flash this on any custom rom Dirty. No wipe needed.:good:
Click to expand...
Click to collapse
Says no ramdisk found to unpack & fails.
on lineage 17.1 & TWRP.

coldfear00 said:
Says no ramdisk found to unpack & fails.
on lineage 17.1 & TWRP.
Click to expand...
Click to collapse
restore boot image from any backup, flash magisk then this kernel

Krishrocks said:
restore boot image from any backup, flash magisk then this kernel
Click to expand...
Click to collapse
Only backup i have is of Lineage OS 17.1, tried restoring boot & flashing but still ramdisk error.
Does it need stock boot or something?
If possible can u direct me to the boot file needed to flash this kernel.
Thanks.

coldfear00 said:
Only backup i have is of Lineage OS 17.1, tried restoring boot & flashing but still ramdisk error.
Does it need stock boot or something?
If possible can u direct me to the boot file needed to flash this kernel.
Thanks.
Click to expand...
Click to collapse
New Los release 12th APR build has this kernel default, enjoy that.

Sar,
Please add rui support

Very sax kernel sar, noticeable difference in both the SoT and performance as well...???

Can you update it for rui based devices?

Any chance you would be willing to try building a kernel with the Project Halium patches so we can try and test the UBports GSI? Probably a long shot but I'd love to play around with an Android alternative.

Does it support wifi packet injection and HID attack in Kali nethunter???

Help please???????
I was running custom rom evolution x I flashed this kernel successfully through orangefox recovery now mobile starts into fastboot mode please anybody help can anyone give me evolution x recovery please so I can get my phone back to life

No ramadisk found error when flshing kernal...Please help ...Realme xt

coldfear00 said:
Says no ramdisk found to unpack & fails.
on lineage 17.1 & TWRP.
Click to expand...
Click to collapse
Same Problem with my devices

Download link send me sir plz fast

Development [KERNEL][AOSP-11/MIUI-STABLE] Quantic Kernel [19/07/21][4.19.197]

Welcome to Quantic a Kernel built specially for POCO F3/ Mi 11x codename: alioth/aliothin
One of the most used kernel on Custom ROMS on Cepheus chosen by developers and one of the most battery friendly on Redmi k20 Pro/Mi 9/F2 Pro/Mi 10T community​
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 11 (Excluding MIUI)*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it with their preferred AOSP ROM(See details below)
FEATURES
Reduced logging events
Swapped scheduler from WALT to Pure PELT (No google implementation)
Enabled ZRAM up to 2GB with lz4 compressor
Upstreamed lz4 compressor
Support for MIUI 12.5 Global Stable
Removed log events on drm by XiaoMi
Android Binder tweaks
ion and iommu rewrittes by kerneltoast
Using new efficient minimum CPU Frequencies
Deactivated CAF CPU Boost
Deactivated MSM_Performance
FIX CPU Capacity issues
Frame commit, touch request, display rendering and drm are processed using big cores to achieve performance at the lowest energy consumption
Using PELT
Using RAW PELT scheduler with selected Google Patches to enhace performance and battery consumption
Upstreamed LTS kernel to 4.19.197
Upstreamed CAF kernel to LA.UM.9.12.r1-12000-SMxx50.0
Disabled coresight clocks (thanks to @dreamisbaka)
Upstreamed DTBs to LA.UM.9.12.r1-10000-SMxx50.0
INSTALLATION PROCEDURE
Flash Quantic_SM8250-OSS-ALITOH-rX.X.zip on your favorite recovery or using Horizon Kernel Flasher
Reboot to system
Enjoy it
DOWNLOAD HERE: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250/releases/tag/r3.1 (check Releases notes first)
TELEGRAM CONTACT
https://t.me/aicplmi <-- Discussion group for support
Thanks List
To kdrag0n
To kerneltoast
To alk3p
To @TeamMex
To Dynescape
SCREENSHOTS ATTACHED BELOW
XDA:DevDB Information
Quantic Kernel, Kernel for the POCO F3/Mi 11x
Contributors
Ayrton990
Source Code: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250 (branch QK-eleven)
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r3.1
Beta Release Date: 2021-02-26
Created 2021-02-26
Last Updated 2021-07-19

Reserved 1

Reserved 2

Welcome here Ayrton.
You have a brilliant kernel,
Looking forward to using it

any touch breaks/delays on pubg like apps

Hi,
How much SOT should i expect from this kernel?
Light usage

Good job, mate. I have long wanted to thank you for the base for the kernel used on Syberia OS.

Deleted

it's green tint fixed on stock miui 12.5 global stable?

I flashed the quantic kernel 3.1 on evox 5.9
By Alexstv and its work fine in this moment

REDOTHELLO said:
I flashed the quantic kernel 3.1 on evox 5.9
By Alexstv and its work fine in this moment
Click to expand...
Click to collapse
How is the smoothness at the scrolling in chrome and other scrolling apps? I find that the stock kernel in evox is really smooth and has a nice feeling

it work on HentaiOS ?

r3sp said:
How is the smoothness at the scrolling in chrome and other scrolling apps? I find that the stock kernel in evox is really smooth and has a nice feeling
Click to expand...
Click to collapse
is not smooth when scrolling on chrome yes but ........ continue testing

You know the zip will only flash to a slot right? slot device flashing is disabled and boot partition is set to boot_a

When installing Quantic kernel in twrp it only installs in boot_a no matter which slot i'm booted into and since my rom is installed in slot b, I can't use it

GtrCraft said:
You know the zip will only flash to a slot right? slot device flashing is disabled and boot partition is set to boot_a
Click to expand...
Click to collapse
So what to do

arifqur said:
When installing Quantic kernel in twrp it only installs in boot_a no matter which slot i'm booted into and since my rom is installed in slot b, I can't use it
Click to expand...
Click to collapse
the script on kernel there specify boot_a and wich twrp you use

REDOTHELLO said:
the script on kernel there specify boot_a and wich twrp you use
Click to expand...
Click to collapse
Vasi's

arifqur said:
So what to do
Click to expand...
Click to collapse
Wait for dev to fix it

REDOTHELLO said:
is not smooth when scrolling on chrome yes but ........ continue testing
Click to expand...
Click to collapse
ok then i stay on the stock kernel, so sad that the costom kernels are not so fluid in scrolling this is also un drunk kernel