Team Win Recovery Project 3.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
By @pjgowtham and @mauronofrio
Note that two kinds of builds are available. The only difference between these builds is that one does adjust for the notch space and adds black border on top and the other TWRP shows as full screen.
Features:
- Temporarily disabled compatibility.zip check to allow flashing stock ROMs
- Ozip decryption
- Device data decryption
- Reboot to EDL
- Full android 9/10 support
and everything a TWRP usually does.
Release 02/02/20
- Updated kernel to android 10
- Updated blobs to android 10
Release 03/02/20
- Device data decryption support added
Release 04/02/20 (stable build)
-Disabled compatibility zip check to allow flashing stock ozip.
Release 08/02/20
- Added TWRP theme for notched devices (thanks to @mauronofrio)
Release 12/02/20[/B][/U]
- Added dtbo.img to the recovery so that it can support both Android pie and 10 firmware
Release 29/02/20
- Added the ability to backup, restore and flash persist partition
- Added the ability to backup, restore internal storage
Bugs :
None
XDA:DevDB Information
TWRP, Tool/Utility for the Realme XT
Contributors
pjgowtham, mauronofrio, thesprintster
Device Tree
https://github.com/pjgowtham/device_realme_RMX1921
https://github.com/mauronofrio/device_realme_RMX1921
Download Link
Stable build : 12/02/20
https://androidfilehost.com/?w=files&flid=304993
@mauronofrio s TWRP builds are included too.
FAQ :
Refer wiki here :,
https://forum.xda-developers.com/realme-xt/how-to/guide-unlocking-unbricking-custom-t4045505
Version Information
Status: Stable
Created 2020-02-02
Last Updated 2020-03-29
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Data Decryption doesn't work.
If you can add it, it would be perfect.
ashruz.ash said:
Data Decryption doesn't work.
If you can add it, it would be perfect.
Click to expand...
Click to collapse
Should be fixed in the next build
sonu0070 said:
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Click to expand...
Click to collapse
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
pjgowtham said:
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
Click to expand...
Click to collapse
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
sonu0070 said:
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
Click to expand...
Click to collapse
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
pjgowtham said:
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
Click to expand...
Click to collapse
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
diazneoones82 said:
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
Click to expand...
Click to collapse
Please refer the wiki. You should unlock on pie itself. That way you have unlocked bootloader on 10.
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
ashruz.ash said:
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
Click to expand...
Click to collapse
A week back we didn't have a wiki page, a backup of the stock recovery, a stable twrp. It's only been a week now since these work were done. On top of it, realme is not very proactive with the kernel sources. But its only a matter of time since we bring up lineage 17.1 or pixel experience. We are working on it.
Good to hear.
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
I get following error when flashed stock rom of Color OS ior RUI in TWRP
failed to mount /dev/block/bootdevice/by-name/userdata at /data
diazneoones82 said:
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
Click to expand...
Click to collapse
Try the latest build maybe
Do you have the indian variant of the device or something else?
Can i flash it on rui c.03
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
My twrp realme xt back to stock recovery...how to solve it?
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
Yes you can flash even on the yet to be released C.04
krizhiel said:
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
Click to expand...
Click to collapse
It works on realme UI
Hello friends
I'm trying to flash custom Q roms in TWRP on my S9 (SM-G960F), but have received the same error message for any Q rom:
ERROR:
Vendor image on the device
is NOT compatible
Expected Android 10 vendor
Click to expand...
Click to collapse
I've only been able to successfully flash P roms, namely the Pie-based LightRom.
Based on the error message, it seems I need to update the firmware to Q before installing custom Q roms?
I've also seen some roms note installation requirements like "ROM Firmware Required: OneUI 2.x", which is new to me (have not seen a TW/OneUI ver requirement for roms I've used on S4, S7, N8).
May I ask someone to explain the steps required to install Q roms (eg, Havoc-OS) coming from P firmware? There seems to be some assumptions in most install instructions I'm not aware of, maybe since I am on older FW. (I am asking here, since I did not find instructions in any of the Q roms I tried)
So far, all I have done to the phone since unboxing it was to install TWRP 3.4.0, following the official guide for Exynos S9.
I am guessing I need to download latest official firmware image from sammobile or something for my device, and flash it in Odin. Is this correct?
If so, can someone explain the steps so that I can have latest FW for my device while maintaining TWRP and not bricking the device?
Thank you for your help
Extra info
(Snapshot from LightRom rom)
One UI version: 1.0
Android version: 9
Baseband version: G960FXXU6CSG4
Kernel version: 4.9.59
Android security patch level: 1 October 2019
Click to expand...
Click to collapse
UPDATE:
I installed latest firmware from Sammobile, flashed it through Odin following their instructions, reinstalled TWRP, and am now able to flash Q roms.
For those who have stock rom < Q, I would suggest updating firmware through OTA before flashing TWRP. If you cannot OTA, download the latest firmware from Sammobile and flash it through Odin following their instructions, then flash TWRP, then you can flash Q roms.
So:
Update firmware through OTA or via Odin with latest firmware from Sammobile.
Flash TWRP
Flash whatever rom you want.
Hi there! Hope you guys are doing well.
I had applied for beta testing of Realme Ui 2.0 on my Realme x. I got the early access and installed Realme Ui 2.0. After that I tried to flash twrp via fastboot. Now I stuck on the screen "Boot/recovery destroyed". My bootloader is unlocked. I can't go to my recovery. However I can access bootloader. I flashed stock ofp using Realme flash tool. It didn't help.
Can anyone provide recovery and vbmeta for Realme x (Realme Ui 2.0).
hey, i have the same problem, someone please help
realme x
build number RMX1901_11_f.04
colorOS V11
The In-depth test app doesn't work
Use a OrangeFox instead of TWRP.
Try instruction below. But it is for Chinese version:
[GUIDE] [RMX1901] Unbrick & Install Android 13 Custom ROM
The guide is for a Chinese version of the phone. But might give you an idea for the global version. History: I was on the latest official ROM. But I was already unlocked the boot. Then I tried to install a custom ROM and failed. Because TWRP for...
forum.xda-developers.com
And you could find some information like extract a .ofp and .ozip stock rom files etc. found from there.
Hello guys i want to install custom recovery for my phone any suggestions? Any link? Becuz i just flashed a twrp for "mi 11 lite"(no ne) and i bricked my phone so yeah
Any help?
My device:
Xiaomi 11 lite 5g ne
Btw im rooted magisk
BillTheXo said:
Hello guys i want to install custom recovery for my phone any suggestions? Any link? Becuz i just flashed a twrp for "mi 11 lite"(no ne) and i bricked my phone so yeah
Any help?
My device:
Xiaomi 11 lite 5g ne
Click to expand...
Click to collapse
There are threads here with custom recoveries for Lisa - please take a look and find/read.
Hint, SHRP or Fox - but they work fine with A11 (MIUI 12.5)
There is no custom recovery that works properly with A11 (hence with MIUI 13 as on your screenshot).
This is generally a known situation - you can go to TWRP.me and find what they say about support for A12 (all other custom recoveries take essentials from TWRP and mainly repack to different UI, add some UI features and so)
To unbrick, flash the stock recovery (hopefully, you will not need to use MiFlash to flash the whole stock firmware)
Generally be careful, do not install custom recovery, ROM, etc for Renoir to Lisa. Phones are 'similar' but they have different chipsets
zgfg said:
There are threads here with custom recoveries for Lisa - please take a look and find/read.
Hint, SHRP or Fox - but they work fine with A11 (MIUI 12.5)
There is no custom recovery that works properly with A11 (hence with MIUI 13 as on your screenshot).
This is generally a known situation - you can go to TWRP.me and find what they say about support for A12 (all other custom recoveries take essentials from TWRP and mainly repack to different UI, add some UI features and so)
To unbrick, flash the stock recovery (hopefully, you will not need to use MiFlash to flash the whole stock firmware)
Click to expand...
Click to collapse
If u can guide me with links of threads that would be nice of u
So basically there is no way i can get a custom recovery for my situation?
And im unbricked so everything is alright now(also rooted)
Its strange that there is no custome recovery for my specifications
hello developers
due to Android security update version of miui roms are changed such as miui 14.0.2 to miui 4.0.3. so base version boot image is enough (14.0.2) for magisk root or need update (14.0.3) boot image for magisk root.
i m asking such questions bcz updated fastboot rom is not available on official website...
thanks