mtcc-kld6-v2.91 hanged on logo - MTCB Android Head Units Q&A

i have a mazda3 2011 with android head unit .
it rebooted and stay on mazda logo.
i can enter to recovery but i dont know with firmware is ok for my head unit.
it had nadroid 5.1.1
pictures :
MTCB/MTCC rk3188 (5.1.1) Firmware
For convenience, latest MicroG & Open GApps enabled MTCB/MTCC firmware, in a suitable thread. Updated on July 3, 2018: (reason in post #636) MicroG in post #396, and here: Mod Edit :- Links Removed Mod Edit :- Links Removed Open GApps in post...
forum.xda-developers.com

Related

[Rom][Lineage15] For Sprint Galaxy S6 [zerofltespr, SM-G920P] [2017-12-09]

LineageOS 15 is based on the latest upcoming version of Android 8.0 Oreo. Android Oreo is been currently released only for the Google Pixel and Nexus device and we can expect the official roll out of Android Oreo for most of the other devices in the end of 2017 or before June 2018. In this guide, we will guide to install Lineage OS 15 For Sprint Galaxy S6. Download and Install Lineage OS 15 For Sprint Galaxy S6 (zerofltespr, SM-G920P).
What's working?
Please remember that Oreo is still a very new release of Android and may contain bugs which are probably going to be fixed in some weeks or even days by the LineageOS-team or even Google itself
Telephony (Calls, SMS, Mobile Data)
WiFi
Bluetooth
NFC
Fingerprint
Camera
Bugs and Problems...
- GPS works only on device mode
– Some video codecs are not played properly
First of all, install TWRP Recovery.
Download the below Lineage OS 15 ROM on to your smartphone.
Now boot into TWRP Recovery and flash rom and gapps
Rom
MOD EDIT: Download link removed
Gapps
MOD EDIT: Download link removed
Please give proper credits and link the original thread + sources. Thanks.
The Development section is not the place to post ROMs you found on the internet--it's for developers to post their own original work in accordance with the GPL2 public license and XDA forum rules. Please make sure you have read and understand the sticky titled "Rules for Posting in Android Development Forums" before posting in this section.
THREAD CLOSED
mahdi72 said:
LineageOS 15 is based on the latest upcoming version of Android 8.0 Oreo. Android Oreo is been currently released only for the Google Pixel and Nexus device and we can expect the official roll out of Android Oreo for most of the other devices in the end of 2017 or before June 2018. In this guide, we will guide to install Lineage OS 15 For Sprint Galaxy S6. Download and Install Lineage OS 15 For Sprint Galaxy S6 (zerofltespr, SM-G920P).
What's working?
Please remember that Oreo is still a very new release of Android and may contain bugs which are probably going to be fixed in some weeks or even days by the LineageOS-team or even Google itself
Telephony (Calls, SMS, Mobile Data)
WiFi
Bluetooth
NFC
Fingerprint
Camera
Bugs and Problems...
- GPS works only on device mode
– Some video codecs are not played properly
First of all, install TWRP Recovery.
Download the below Lineage OS 15 ROM on to your smartphone.
Now boot into TWRP Recovery and flash rom and gapps
Rom
MOD EDIT: Download link removed
Gapps
MOD EDIT: Download link removed
Click to expand...
Click to collapse

[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]

[size=+2]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
[size=+1]About these builds[/size]
This is the stock firmware, repackaged to be flashable in TWRP Recovery. In an effort to make these zips safer, I have removed all bootloader and gpt (partition table) related items.
[size=+1]Requirements[/size]
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
[size=+1]Installation[/size]
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal or external storage)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
[size=+1]Downloads[/size]
Nougat 7.0 (April 1st Security Patch)
• AFH -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
• G-Drive -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
md5sum == 71cab7a1bdebb067c569366dcaa26968
Oreo 8.1.0 Soak Test (November 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.108.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.108.zip
md5sum == c995bcb22215346e362195447de686f8
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-12.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-12.zip
md5sum == d7f7a0acdbb8e4bd24fa89e8513ec21c
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-22.zip <-- coming soon
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-22.zip
md5sum == coming soon
[size=+1]Other Notes[/size]
* If you want to root, use Magisk and just flash in TWRP immediately after flashing the newest Oreo build. The latest build now fully passes SafetyNet and shows the device as being Certified in the Play Store.
* If you're already on the previous Oreo build (OPJ28.108 - November Security Patch), you can easily update to the latest Oreo build (OPJ28.111-12 - December Security Patch) by dirty flashing. If you want to keep root, you'll still need to flash Magisk again after flashing the newer build.
* To root the Nougat build(s), you will need to flash a custom kernel, then flash Magisk (same as before).
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - December 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2019-01-09
**Reserved**
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
zerocoolriddler said:
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
Click to expand...
Click to collapse
these ROM have the same problems with camera like a soak test bulid?
all wipes needed to install these ROM?
vlrgamaley said:
these ROM have the same problems with camera like a soak test bulid?
Click to expand...
Click to collapse
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Thanks for your Hard Work.
Jleeblanch said:
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Click to expand...
Click to collapse
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Jleeblanch said:
[size=+1]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
About this build
What is different about this versus what's already available? Basically what I have done is taken the previous 7.0 (nougat) firmware and directly patched it using the 8.1.0 (oreo) OTA zip from this thread. In an effort to make this build safer for everyone to use, I have left out any bootloader related items which is what can potentially prevent you from being able to downgrade. If this had been an official release, I would also have removed dm-verity (and forced encryption) as needed also. But being this is a test build from Moto, they have yet to enable such features. Now, on to the good stuff.
Requirements
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
-> You may or may not need to be on stock nougat prior, need confirmation on this
Installation
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal storage or external)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
Downloads
Oreo 8.1.0 Soak Test (November 1st Security Patch)
AFH - TWRP-athene-OPJ28.108.zip
G-Drive - TWRP-athene-OPJ28.108.zip
md5sum = c995bcb22215346e362195447de686f8
Other Notes
Currently as mentioned in the other thread, the build doesn't fully pass SafetyNet as it's a test release. You can use Magisk modules to fix this if needed.
You can also easily root by flashing Magisk immediately after the TWRP zip or any time afterwards.
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2018-11-26
Click to expand...
Click to collapse
Thanx your .zip fixed the sim issues . Thanx mate
Jleeblanch said:
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Click to expand...
Click to collapse
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Awesome work dont stop keep up the good work
I`ve had previously RR 5.8 (Nougat 7.1, no custom kernels) and try install your ROM (without wipes, like you describe in instruction). Result? Bootloop. I have Moto 2g RAM/16 Gb Flash, install through rajatgupta recovery v 3.2.1-r3. Try now with wipes, but i don`t have confidence for good result.
try again with wipes, works normally. woah
jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
I doubt any of the stock kernels currently available would work as they're intended for nougat (7.0).
corlatemanuel said:
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Click to expand...
Click to collapse
Fair enough. I'm surprised you haven't unlocked the bootloader yet, LineageOS is pretty good for the G6+ and also is used as a base ROM for flashing GSI's. I'll be making a stock based custom kernel (and one for the custom rom's/GSI's soon too).
DanFaraday777 said:
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Click to expand...
Click to collapse
I gotta finish up some TWRP flashable builds for the Moto G6 and then I'll upload the one I made for nougat when I upload those [emoji41]
luv u
thanks a lot
Thanks for zip :good:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Henry Markle said:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Click to expand...
Click to collapse
I mean the latest stock nougat build NPJS25.93-14-18
jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
echo92 said:
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
Click to expand...
Click to collapse
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they'll appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Jleeblanch said:
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they're appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Click to expand...
Click to collapse
Oh yup, it'd probably be a bit soon to put in a request, and I imagine they may change the kernel source code for the final release anyway (e.g. if they update to the latest security patch). Thanks for keeping a close eye on it - exciting times ahead

PSA: There is Still Hope & Life for Your Find 7 - Lineage OS 16 (Android 9.0) And BitGapps

I've accidentally stumbled upon this while trying to revive my Find 7 X9076.
There is a way to Run Lineage OS 16 AND install Gapps WITHOUT unifying storage.
I had to remove the device compatibility checks in the OS to be able to install this without Error 7.
My phone - Find 7 X0976
Recovery - TWRP 3.1.0-0
Storage - Stock (16gb + 16gb)
Step 1 - Boot into Recovery
Step 2 - Reset and Wipe for Fresh Install
Step 3 - Install Lineage OS 16
Step 4 - Install BITGapps for Android 9.0
Step 5 - Reboot and enjoy
I don't know about rooting or anything else, just how to get around the Gapps failing to install. Bitgapps is small enough to install without any jury rigging.
Links
Lineage OS 16 + BitGapps ARM 9.0 - https://drive.google.com/drive/folders/1Q5DNdG2PkpEiOQIMnZE5gd7_Kbhhh-bO?usp=sharing
Bitgapps ARM 9.0 - {Mod edit} [Link not allowed lol ]
@Esposition Download link via pling.com for BitGapps removed from OP. pling.com is a paid-per-download site, and as such violating the XDA Forum Rules and not accepted as file host on XDA.
Oswald Boelcke said:
@Esposition Download link via pling.com for BitGapps removed from OP. pling.com is a paid-per-download site, and as such violating the XDA Forum Rules and not accepted as file host on XDA.
Click to expand...
Click to collapse
Silly as it's from the bitgapps download page, but I've uploaded it into the google drive now.
Both downloads in one link.
I use MindtheGapps for my oppo Find 7. Lineage has dropped support for Oppo Find 7 I guess. I can't find the page anymore. Can I know what version is the LOS 16 in that link? Anyone know where to download the older versions?
Anyone still has the last build for Oppo Find7 Lineage OS 16. I need t0 wipe and reflash my phone which is running the 11 Jan 2021 version. Not sure if there are any newer than that. Thanks. I have no clue how to build it.
play8oy said:
Anyone still has the last build for Oppo Find7 Lineage OS 16. I need t0 wipe and reflash my phone which is running the 11 Jan 2021 version. Not sure if there are any newer than that. Thanks. I have no clue how to build it.
Click to expand...
Click to collapse
Nvm found it.
See on archive.org: LineageOS Backup 2021-02-17 - "LineageOS mirror/backup made on 2021-02-17 after LineageOS 16 was "dropped" > Show all files > roms/ > {device}.
Sadly old LineageOS packages are automatically deleted from the LineageOS servers after 4~6 weeks.
See LineageOS FAQ - Archives
Thanks to monteverde_org on r/LineageOS.
Will this also work on Find 7a? Thanks!
Stefanos infinity said:
Will this also work on Find 7a? Thanks!
Click to expand...
Click to collapse
this rom? Not sure, but i think it does. Coz there would have a separate folder for 7a if not.
@Esposition, how do you remove the device compatibility checks?

Question ColorOS 12.1 C.62

OnePlus has released the ColorOS 12.1 C.62 update today with new system changes along with April security patch.
ColorOS 12.1 C.62 changelog:
System :
- Improves system performance in some scenarios. • Fixes a screen flicker issue that would occur in certain scenarios.
Security :
- integrates the April 2022 Android security patch.
Thanks to Sravan kalasapati from Techibee Info & download link :
Color OS 12.1 C.62 released for OnePlus 9 & 9 PRO , What’s New? – Download The Update Here
ONEPLUS has already released the COLOR OS 12.1 C.61 on 28th march . Now they have released the new C.62 update today with new system changes along with APRIL SECURITY PATCH. Join Techibee Telegram Channel Join Now WhatsApp Group Join Now COLOR OS C.62 CHANGELOG:- System • Improves system...
techibee.in
Other download link . Soon the rom will be ready. Uploadin progres.
一加9 Pro - 一加手机官方ROM - 一加手机官方ROM下载
本站提供一加全机型ROM下载,包括一加Ace 2V、ACE2、Ace/10R、一加10 Pro、9Pro、9RT、9R、8T、8 Pro、一加8、7T Pro、7T、7Pro等全系一加机型的升级全量包、降级包、9008线刷救砖包等各种官方和原厂ROM,全部资源完全免费,不限速,无需登录
yun.daxiaamu.com
Faster link: https://drive.google.com/file/d/18NKyFSIXPAzQqd1GXBPKJCE9FEfyfkKZ/view?usp=sharing
It's buggy, found a few bugs!
I updated today. and I also have root. I do have 1 bug. The message app and I have tried a bunch will not download MMS pictures. and I can't find a fix. That's the only bug I have. I love colorOS over oxygenOS any day.
foamerman said:
I updated today. and I also have root. I do have 1 bug. The message app and I have tried a bunch will not download MMS pictures. and I can't find a fix. That's the only bug I have. I love colorOS over oxygenOS any day.
Click to expand...
Click to collapse
Hi, how do i root color os c.62? tried to look for tutorials online but cant find any.
Samsung Galaxy Watch 4 supported?
Did anyone try whether Samusng Watch 4 is pairing with this Color OS version? I tried until the previous version, but do not work
Is there a version of this by chance for the LE2125?
saminaminahehe said:
Hi, how do i root color os c.62? tried to look for tutorials online but cant find any.
Click to expand...
Click to collapse
try this, it's more of a broad guide
[Guide] How to ROOT OnePlus8T (CN/IN/EU/International) KB2000,KB2001,KB2003,KB2005
DISCLAIMER I have only tested this on my OnePlus8T Indian model - KB2001 Huge thanks to @topjohnwu for his magic. YOU NEED TO UNLOCK YOUR BOOTLOADER! In case you brick your device, use this unbrick guide If you get into a boot-loop by flashing...
forum.xda-developers.com
jaceypoo said:
Is there a version of this by chance for the LE2125?
Click to expand...
Click to collapse
Look 6 post above your post it's global it will work
I flashed it and lost all mobile data lol. Calls worked and text worked. But that was it. So I went back to oos atm.
benhidalgo said:
try this, it's more of a broad guide
[Guide] How to ROOT OnePlus8T (CN/IN/EU/International) KB2000,KB2001,KB2003,KB2005
DISCLAIMER I have only tested this on my OnePlus8T Indian model - KB2001 Huge thanks to @topjohnwu for his magic. YOU NEED TO UNLOCK YOUR BOOTLOADER! In case you brick your device, use this unbrick guide If you get into a boot-loop by flashing...
forum.xda-developers.com
Click to expand...
Click to collapse
Will try this later on Color OS, thank you!
saminaminahehe said:
Will try this later on Color OS, thank you!
Click to expand...
Click to collapse
yes it helps every OP phone with any OS
also, watch these tutorials to get the boot.img image for Magisk
How To Extract Android Payload.bin To Get img Files | Computer | Android Payload Dumper Tutorial
How to Root & Extract BOOT image of Oneplus 9 & 9 Pro running Oxygen OS 11.2.7.7!! Easy Tutorial
Hey got a question for the group for the people that are on Verizon Wireless. What message app are you using to download MMS pictures when you get a text with a mms picture?
Am I the only one that's on Verizon in this group? Come on guys I need a little help. I've tried just about every text messaging app.

[GUIDE][instantnoodlep][13.0] Guide to installing crDroid V9.0+ [OOS 12]

This is a temporary guide until an official XDA thread of crDroid 9 by the maintainer is out
I'm posting the latest ROM info, install method and files for the users who are crDroid fans like me
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
I'm not the maintainer or a crDroid dev
crDroid is a vanilla ROM, so there's no Gapps included
You don't have to be on OOS 13 to install the new CrDroid update as OOS 13 Framework is included
If you're on an OOS 12 or 13 based Custom ROM -> reboot to recovery -> factory reset then follow the clean flash method
The vbmeta and recovery.img files are from the payload.bin file of the ROM.zip file
The .img files are compressed into a .zip file and the tool I used to extract them are attached below
Flashing Instructions:
For flashing/getting OOS 12 in both slots:
Use Msmtool to come back on oos 11.
Download latest full zip of oos 12 from Oxygen Updater app or from OxygenOS builds XDA thread (You need to know your model number!)
Download and install the OPLocalUpdate apk from this XDA thread
Go into Settings -> system update -> local upgrade
Find the OOS 12 .zip you just downloaded from oxygen updater
Install it and reboot
Repeat steps 4 to 6 (To install OOS 12 on both slots)
Unlock bootloader
For first time install/ Clean Flash:
Have an unlocked bootloader & OOS 12 (C20 - C36) flashed to both slots.
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Download vbmeta, recovery for your device which is in the .zip file attached below
Put it in the same folder where your ADB/platform-tools files are
Reboot to bootloader
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
Choose "Factory reset"
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to recovery.
Choose "Apply update" -> "Apply from ADB"
adb sideload gapps.zip (Nikgapps basic or full recommended)
If you want to install NikGapps Addons do this
Otherwise, go to the next suggestion if you want root or just reboot to system. Up to u
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload addons.zip
Repeat step 1 - 2 for other addons
If you want root do this
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload magisk.zip
OR adb sideload magisk.apk
Reboot to system & Enjoy!
Otherwise, just reboot to system. Up to u
To update:
Download ROM the file named like this: crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip
Put it in the same folder where your ADB/platform-tools files are
Reboot to recovery
Choose "Apply update" -> "Apply from ADB"
adb sideload "crDroidAndroid-13.0-XXXXXXXX-instantnoodlep-v9.X.zip"
Reboot to system & Enjoy!
Recommended Gapps:
NikGapps-T basic or full
- T is for Android 13
- SL is for Android 12.1/12L
- S is for Android 12
Recommended NikGapps Addons:
More about NikGapps Addons is in the "NikGapps Addon info" post below
SetupWizard addon
Sources:
ROM: https://github.com/crdroidandroid
Download:
Temporary Links:
Until it's on the official site
ROM: download
Flashing files: download
Official Links:
ROM: download
NikGapps: download
NikGapps Addons: download
OOS versions for OP8Pro (under Signed Flashable zips) Here
Changelog: Changelog
crDroid OnePlus 8 Telegram group
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to support the dev
XDAevDB Information
crdroidandroid, ROM for the OnePlus 8P
Contributors
Saurabh Parab
Source Code: https://github.com/crdroidandroid
Updates:
28/10/22 - crDroid v9.0 Unofficial build was released for OP8 & OP8 Pro
Android: 13
Based on: OOS 12 Framework
Security Patch: October (2022-10-05)
Notes:
Need Clean Flash
"The Bootloader is unlocked" screen is removed
Widevine L1 and HDR works
Kcal and per-app refresh rate is here
Screen resolution changer in display settings (1080P FHD+ and 1440P QHD+)
Issues:
No OTA and will be available in next update
No face unlock
No OOS cam
There's risk of poor SoT/battery life
Call recorder has issues
Google photos brightness bug
30/10/22 - Created this thread to help users install latest crDroid 9
11/11/22 - Anticipated official Crdroid 9.0 will come out soon
Based on: OOS 12 Framework
Security Patch: November (2022-11-05)
Notes:
This will be official build with OTA feature
Face unlock will work
No OOS cam
25/12/22 - Official crDroid 9.0 is released!
Based on: OOS 13 Framework
Security Patch: December (2022-12-05)
Notes:
Has OTA Update feature
Face unlock works
No OOS cam
Google photos brightness bug is fixed
New parallel apps with crDroid Launcher only
Issues:
When swiping on lock screen to allow face unlock doesn't work
Google Dialer UI becomes enlarged during calls in QHD+ resolution
26/12/22 - Updated method and added necessary files to install new update
NikGapps Addon info:
These issues were from crDroid 8 (A12.1)
Gboard
For Gboard users, deleting text in the text suggestions tab won't work unless u install the Gboard addon. But it needs to be installed before setting ur device up
A factory reset is needed for it to work, so don't flash it if u got everything set up
GoogleSearch
For google assistant users, "hey google" will not work without installing the GoogleSearch addonas the "google app" needs to be a system app.
But supposedly on crDroid 9 this issue doesn't happen and "hey google" works without the addon
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
HolyHog said:
Excellent ROM on my IN2025 with Verizon SIMM. Thanks for your hard work on this!
Click to expand...
Click to collapse
Thanks, but I'm sorry to say that I'm not the maintainer/dev for this ROM.
It's in the disclaimer as well and I cannot take any credit
All I did was create this XDA thread to share this great ROM with people who aren't aware of it
It's good to hear that u managed to install it and everything is going well for you
When official will be released?
this is also my question
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
zement said:
crDroidAndroid-13.0-20221223-instantnoodlep-v9.0 has been posted on sourceforge.net. Will there be a separate branch for crDroidAndroid-13.0.
Click to expand...
Click to collapse
Do u mean a XDA thread for crDroid 9.0? For that idk as I'm not the dev/maintainer
New Update!
CrDroid v9.0 is out
[ROM][13][OFFICIAL][OP8 /8 Pro/8T] crDroid v9.0 [23.12.2022]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com

Categories

Resources