Related
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..
mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.
Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:
Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are
Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising
IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"
Hello hello,
this will be my "live" thread of bringing AICP 13.1 to my xperia z1c, I found some Guide's that I will follow and I will share with you all the links and knowledge I gained as a newbie that I used to understand and fix my problems on the way.
Maybe this will help you, too.
Main Tutorial: LINK
Target of all this: LINK
My Device:
Sony XPERIA Z1C, 14.6.A.1.236 , Lollipop 5.1.1
My best hint: read carefully, take your time to understand what you're trying to do and do your own research!
Hopefully you will get a aicp custom rom out of it.
_____________________________________________
_____________________________________________
General information: Android 5.1.1 cannot be rooted due to its high security standards, therefore we will downgrade to a lower security stock rom and create root access there. Root access will be needed as well as an unlocked bootloader to install real recovery (TWRP) which is the tool to flash custom roms like aicp. But the aicp custom rom will not have a good working camera, don't ask me why, but the camera seems to be a really difficult thing from the point of developer's view, let's accept this. Aside of that disadvantage, this custom rom is a very nice software and it makes my z1c kind of new. I don't use my camera anyway often at all.
During all this flashing thing I had a very big ??? while implementing real recovery. I was able to flash the .236.ftf but not the openbootloader.ftf as described in section 5 in the main tutorial. The result was twrp boot failed.
Error description:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
boot stock rom works
My solution:
I restarted from scratch and finally with the kind of messed up secquenceI got it:
flash .236.ftf works
flash openbootloader fails
flash twrp works
boot twrp fails
flash openbootloader works
flash twrp works
boot twrp works
UPDATE 06.12.2018 as a solution for REAL RECOVERY with working camera <<< RECOMMENDED
0. boot into rom works
1. flash openbootloader works
2. boot into rom works
3. flash .236.ftf works
4. boot into rom & check camera works
3. flash twrp ( business as usal ) works
4. boot twrp ( First boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
5. full wipe, flash aicp-rom, flash gapps, flash magisk-root, boot system works
6. enjoy Oreo 8.1 & camera check !!! works !!!
This routine worked straight forward for me where I started from scratch with my second device.
Flashing aicp was pretty easy, good to know for flashing the rom was full wipe = advanced wipe and select everything except of micro sd
To complete my aicp 13.1 Oreo 8.1 device the camera problem has to be fixed ( Saving the taken picture fails, display goes into freeze, no chance to solve this with camera mods, camera apps )
But @lm089 gave me the right hint, and finally this was my solution! Thanks again @lm089!!
Have fun with your new >> SONY XPERIA Z1 COMPACT <<
How to update TWRP
1. Turn Off your device
2. Start device in fastboot mode by connecting via usb cable to your pc and press Vol- until blue led tuns on
3. use fastboot flash recovery twrp.img to flash it
4. boot twrp ( This first boot is damn important, don't miss it! Press Vol- & Power, wait for vibration, release Power & keep Vol- until twrp boots up ) works
How to update to aicp 14.0 pie 9.0
starting with the running and latest aicp 13.1 oreo 8.1 rom above I just followed the Instructions here. As a specialty I had to install the Magisk Manager App manually into the rom to get root. Downloading supersu.apk from www.supersuroot.org works fine as well.
Your fastboot connection doesnt work for some reason though u had this workin fine in the past? maybe u had a windows update. install your drivers again.
>> LETS KEEP THIS DEVICE ALIVE <<
_____________________________________________
_____________________________________________
More helpful links that I used:
Debug apps by creating logs
what is adb? an xda tutorial
ADB working Download Link and ADB Article on xda
xda flashtool error during setup: click
[NOOBIE] Basic adb commands and device partition overview
Latest TWRP 3.2.3-0 for z1c
root solution using flash tool
Restore DRM functionality after UB
If TA Backup dry restoration restoration fails: Solution and Download *.dll
Boot into recovery or fastboot mode
How to install TWRP
Magisk beats superSU
How to Install Custom ROM using TWRP for Android!
change boot animations
[TUTORIAL] Design Your Own Bootanimation
Backup & Restore Your ROM With TWRP
Terminology: odex and deodex
If the camera goes into freeze or saving the picture fails: This was my solution! /// But you better go straight with the steps of my update 06.12.2018, field tested!
THANKS A LOT TO @colaigor for his [BEGINNERS GUIDE]
Ok. So i dont have much time now but i can give some short directions.
1. Get unlock codes from sony for bootloader unlock
2. Instal adb and fastboot at your system(PC)
3. Instal z1c drivers
4. Instal flashtool
5. Unlock bootloader,root,flash recovery(search forum for "real recovery" ),flash root solution
6. Flash wanted rom,gaps
P.P. On second thought u dont need flashtool. All can be done with adb and fastboot commands from terminal
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
derjango said:
There is one thing I don't understand:
what is the difference between FLASHING REAL RECOVERY and FLASHING FAKE RECOVERY?
What I read is, that in both cases I get TWRP but on different partitions (real = Recovery Partition, fake = Boot partition) but do I need both or do I choose just on of them?
Click to expand...
Click to collapse
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Ok thank you :good:
flashtool log of openbootloader.ftf failed:
01/015/2018 13:15:58 - INFO - Device connected in flash mode
01/017/2018 13:17:19 - INFO - Selected Bundle for Sony Xperia Z1 Compact(D5503). FW release : 1. Customization : openbootloader
01/017/2018 13:17:19 - INFO - Preparing files for flashing
01/017/2018 13:17:19 - INFO - Please connect your device into flashmode.
01/017/2018 13:17:19 - INFO - Using Gordon gate drivers version 3.1.0.0
01/017/2018 13:17:20 - INFO - Opening device for R/W
01/017/2018 13:17:20 - INFO - Device ready for R/W.
01/017/2018 13:17:20 - INFO - Reading device information
Click to expand...
Click to collapse
solved, I skipped step 5.2, flashing the .236.ftf in advance
but how can I start TWRP?
doesnt work with POWER + Vol-, vibrate & release power
I tried to flash the following recovery solution using this command:
smartphone in fastboot mode (blue LED enabled)
fastboot flash recovery recovery.img
TWRP from step 5.1 of the GUIDE
TWRP 3.0.2
My formerly flashed .236.ftf rom works fine, but I cant start TWRP the device goes directly to my rom
zlata said:
Real recovery have its own partition(after that update to bootloader). Custom recovery dont have that and its stored somewhere else(FOTA,onetime boot image , etc). Choose real recovery. New stuff works good with it.
Click to expand...
Click to collapse
Thats where I'm stuck right now, any ideas how to fix?
okay got it, basically i do not know what the problem is but:
after BLU
flash .236 :good:
flash openbootloader
flash twrp :good:
--> failed to install openbootloader and probably thus twrp failed
solution: I skipped to flash .236 as recommended by the author of the GUIDE (step 5.2)
flash open bootloader :good:
flash twrp :good:
--> failed to start twrp, though it was installed successfully
flash .236 :good:
flash openbootloader (failed again, but it's already on the device and I guess I could have skipped this here)
flash twrp :good:
first boot of twrp is successful :good:
And basically the author explained it in his text, FIRST INSTALL OPEN BOOTLOADER BEFORE WRITING STH TO RECOVERY PARTITION
I think you should use Aicp 14 pie instead of 13.1 Oreo
I feel Aicp 14 PIE is very stable and flash port camera stock this link https://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/port-stock-camera-nougat-roms- t3628791
Nice thread, thank you! Wish I had that when I started rooting and flashing
@lm089 Haha it's quite some work to get into it, right? I just saw that we are running on the same device & custom rom, how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
derjango said:
how did you solve the issue with the not working camera? I'm still reading stuff about some mod, but I'm curious and open for tested solutions on z1c
best, dj
Click to expand...
Click to collapse
Had this situation twice with 2 different oreo ROMs. Both times I solved it following a rather strange sounding suggestion I found on the AICP 13.1 discussion thread. The basic idea is to go back to a stock Sony ROM. Boot into it and make sure the camera is working which for me was the case both times. Then - if necessary - re-root your phone (on first occasion I flashed a pre-rooted .236 version but that caused some extra trouble so next time I decided to flash an unrooted version). And from then on it's the standard way as you described it in your OP.
Good luck!
Okay, thanks a lot for your hint! Unfortunately the camera mod didn't fix the problem, my android-task for this evening is defined:
AICP 13.1 Oreo 8.1 on z1c, root, ulb, magisk 17.1
1. backup my system (done)
2.0 flash stock rom lollipop 5.1.1 (14.6.A.1.236.ftf) with flashtool via usb (done),booting the os for the first time takes quite long (~10m), check camera in the os (done)
interesting fact: recovery is deleted by flashing the rom via flashtool - I thought I can go the lazy way and skip the step of installing twrp again into recovery
2.1 okay, let's do it: install twrp (done) and boot into twrp, NOT into ROM!! (done) (Vol- & Power, wait for vibration & release Power but keep Vol- until TWRP starts up)
3. flash aicp 13.1 following this (full wipe as an advanced wipe: select all EXCLUDING THE SD STORAGE)
Again here, I recognized the first boot of the rom takes quite longer.
4. check camera (done)
!!!! IT WORKS !!!!
(I did it two times)
alright, lets start flashing my second device - now I know how to do it
Thanks guys!!
derjango said:
!!!! IT WORKS !!!![/SIZE]
Click to expand...
Click to collapse
Weird, isn't it?
lm089 said:
Weird, isn't it?
Click to expand...
Click to collapse
Totally But hey, it's a solution
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
derjango said:
btw @lm089, boots your ota-updater directly into twrp and start the flashing procedure? In my case I had to boot twrp manually and flash the zip manually, too
Click to expand...
Click to collapse
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
lm089 said:
No, updater is booting into recovery, doing a nandroid backup and wiping caches (because I told it to), then flashing and finally rebooting into system. All by itself :good:
I remember having trouble with that in the past though. Do you by any chance have an SD card formatted as adoptable storage?
Click to expand...
Click to collapse
Yes, its used as an external storage
derjango said:
Yes, its used as an external storage
Click to expand...
Click to collapse
ok, that's something different; adoptable storage means that your SD or part of it is setup to extend internal storage. If you can access all of your SD from TWRP then it is indeed formatted a external storage.
1) How to unlock bootloader:
https://developer.sony.com/develop/...ed/unlock-bootloader/how-to-unlock-bootloader
2) Download Platform-tools (adb & fastboot) r.26.0.2 as latests version does not work (or just for me):
https://xiaomifirmware.com/downloads/download-platform-tools-adb-fastboot-r-26-0-0/
3) Download TWRP 3.2.3-0 https://androidfilehost.com/?fid=11410963190603854057 and place file in Platform Tools folder on PC
4) Restart in fastboot mode and flash revovery:
fastboot flash recovery Z1C_twrp_3.2.3-0.img
fastboot reboot
5.1) Download AICP Oreo 8.1 http://dwnld.aicp-rom.com/device/amami/WEEKLY/aicp_amami_o-13.1-WEEKLY-20181204.zip and place file in Platform Tools folder on PC
5.2) Download Gapps Pico https://opengapps.org/?download=false&arch=arm&api=8.1&variant=pico and place file in Platform Tools folder on PC
5.3) Download stable Magisk 17.1 https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip place file in Platform Tools folder on PC
6.1) Load TWRP. Advance>ADB Sideload (for Oreo)
adb sideload aicp_amami_o-13.1-WEEKLY-20181204.zip
(do not restart)
6.2) Repeat Advance>ADB Sideload (for Gapps)
adb sideload open_gapps-arm-8.1-pico-2018XXXX.zip
(do not restart)
6.3) Repeat Advance>ADB Sideload (for Magisk)
adb sideload Magisk-v17.1.zip
(restart)