I Broken phone? I need help! 🤦‍♂️ - Samsung Galaxy Note 10+ Questions & Answers

Hi everyone. I own a Note 10+ n975u1 and I've mistakenly flashed and switched several files from Odin.
Whatever I do, the smartphone does not turn on and even my pc cannot read it.
If I try to connect it to the usb port or electric current, trying to entry into download mode, only in this case, I get this message.
This is the only sign that the smartphone shows.
Obviously, my pc cannot read it and as soon as I unplug the usb cable, the smartphone turns off immediately.
Can I do anything to enter into download mode and flash the new S.O.?
I also tried using the "ADB" tool but even this does not read the smartphone.
Have I broken its motherboard?
Photo attached.

Give this a shot.

Related

USB Device Not Recognised on Bootloader

I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Try this it shld work
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
Guru Meditation said:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Just noticed your user name, I was a big Amiga fan a few years back, still fire up Amiga forever occasionally on my PC when I feel the need.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Click to expand...
Click to collapse
Try it with a different USB cable or in a different USB port (don't go through a hub and if you've been using a laptop then try it on a desktop PC since some laptops have hubs built into them). If that doesn't work then you're out of luck as your Universal isn't detecting that you've connected to your PC and its time to send it in for repair.
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
i am stuck on the same problem and wondering the forum for almost 3 days now with no luck.... please help my device is in boot loader mood but not turning the serial to USB ......... please HELP.......
solution
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Please follow the steps:
1. Plug in ur usb cable in bootloader mode while it is showing 'serial' and version 'x.xx'.
2. Soft reset by pressing Backlight+power+reset pin WHILE KEEPING THE USB CABLE CONNECTED
3. your phone will now reboot into 'usb' mode. Don't remove the usb cable yet.
4. Remove the Memory card while keeping the usb cable still connected and VOILA,your pc starts recognising your phone as Microsoft usb sync.
5. Do whatever you want to do now (upgrade)
Hope it solves the problem now.
Press thanks if it does.
Something else to try
Having had a few issues with my G3 Uni, I've been through my fare share of Uni bootloader issues. When I find that I can't get the 'serial' to go to 'USB', I normally find it's because I haven't taken the memory card or the SIM card out (usually the memory card).
Make sure your memory card is out, then try to enter the bootloader and see if this cures it. If it does, then use mtty and the command 'set 14 0'
This tells it to reboot on reset. if you were to use 'set 14 1' it would go back to the bootloader on reset.
my Htc hd2 t-mobile won't recognize usb on boot-loader mode
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
kaleb2954 said:
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you have the wrong forum friends! This Htc Universal section
to update Android on HTC HD2, you can use the Clock Work Mod Recovery !! for more details should refer to this thread http://forum.xda-developers.com/showthread.php?t=1021837
I-MATE JASJAR hung
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
bechir2013 said:
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
the first point...
A lot easier than to root this device

note 2 doesn't start

hello,
my note 2 doesn't turn on. it still remains in the display with samsung logo. i can't enter in recovery, but only in download mode. i tried to reflash the twrp with odin, but odin doesn't recognize the smartphone.
how can i solve?
thank you
Did Odin recognise the phone before?
Unfortunately I've been there, Odin won't recognise the note 2 nether will the PC, there is a problem in the USB socket that comes with the phone that makes the phone unable to be recognized by the PC unless you use the Cable that came with the phone and not always, so you have two options now:
1-keep trying any cable you find, even if it was a camera cable or other devices, or try to find the original note 2 cable.
2-or change the USB socket in your phone with a normal one and you will be able to make it recognized by the PC.
I always hated that issue ?
If you could solve it in another way, then tell me..
Regards Migo
@audit13 no @MigO thanks, i will try with another cable, but i don't have original cable
Also try all usb 2.0 ports and make sure drivers are installed properly.

Unable to flash ROM due to PC not recognizing device

Hello friends!
New registered user here but have already read tons of threads regarding G3 troubleshooting. Anyway, have decided to post this problem and if a similar situation has already been posted (and solved), please provide link.
For some strange reason, my G3 have decided to stay in the LG logo (I understand that this is the so-called boot-loop). This happened when the phone suddenly restarted while watching a YT vid and the battery still at 30%++. The phone just keeps on restarting until such a time that it never got pass the LG logo.
Here are the things that I have already tried to no avail:
1. Enter Hard Reset page via hardware keys (Power + Vol Up buttons). Have chosen "Yes" to hard reset device but alas, it never got pass the LG logo.
2. Downloaded PC suite, KDZ flashtool, and LGUP. Installed all three software. Connected G3 to PC and entered download mode (Vol Down while inserting USB cable). Unfortunately, unable to fully use either of the three software since the PC cannot detect G3.
Number 2 is quite strange since I have downloaded and installed all G3 drivers. This I know since a friend of mine who owns a working G3 unit was detected by the computer and can sync with the PC suite.
For some strange reason, everytime I connect my broken G3 to the computer, it is not detected by the PC and was not even listed in the device manager.
Any help and advise would be highly appreciated
I already downloaded all necessary tools (KDZ, LGUP, and flashtool) to flash the ROM but I need the PC to see the G3 unit to be able to do so.
By the way, before the bootloop scenario: the debugging (or is it developer?) options are disabled and I'm not sure if the bootloader is locked or unlocked.
I hope all this info is of any use.
Thanks a lot in advance
Have you tried simpler solutions first? Like, trying another USB ? Or another USB port from your pc? This maybe hardware related rather than software. You should try that before anything else. (Maybe you did?)
neyvermore said:
Have you tried simpler solutions first? Like, trying another USB ? Or another USB port from your pc? This maybe hardware related rather than software. You should try that before anything else. (Maybe you did?)
Click to expand...
Click to collapse
Thanks for the reply. Yup, have done those. Tried a different cable, different USB port, and borrowed a working G3 unit. The good G3 unit was detected by the PC but when I connect my broken G3 (same cable and same USB port), the PC does not detect it (not even listed in device manager).
Because of this hurdle, I couldn't flash with LGUP (it states no handset was connected). The KDZ flashtool basically says the same message.
By the way, my debugging options are disabled before this whole problem started. Could that be a reason why the PC won't detect the unit?

PC cannot see phone

Hi
I would appreciate any input/help on this issue.
I bought the Korean Note 10 + 5g exynos (SM-N976N), specifically for the purposes of being able to root it. I would prefer to use the Magisk approach, because I would like to be able to use Google Pay, amongst others
Try as I might, I cannot get my PC to "see" the android phone. I have engaged developer mode, checked USB debugging, checked the the USB connection as MTP mode, and gone through several cables, going by the advice of "experts" I consulted. I even went as far as returning my original phone and buying a new one, again, on the advice of an "expert" who determined that my original phone was faulty (unlikely, since I had literally taken it out of the box and attempted the rooting before trying to load my multiple software). I am using Windows 10, 64k, with all current Microsoft updates.
I have reloaded the Samsung USB drivers, rebooted both the phone and PC several times, to no avail. When I connect, in download mode, the USB cable between the two devices, I hear the "ping" on the PC, indicating that the two have made contact, but then - nothing. I have established that the cable works fine, by connecting my Note 8 to the PC, where it shows up as a device with two drives (int and SD card)
I have installed Magisk on the 10+, and modified the stock ROM with Magisk, and then copied that over to the PC, as advised by the rooting solution; the problem is that I cannot use Odin to flash that modified ROM because Odin does not recognize any phone attached to it!
Help, Please!!
Could be the Odin version your using
Perhaps, I hadn't thought of that. I am using 3.13.1. Do you have a suggestion about using a more stable/useful one? My only issue with your answer is that it's not just Odin that isn't responding- it's the entire computer - it's as if the phone doesn't exist when connected.
I'm guessing you are using a USB 3.0 port on pc? If you have access to USB 2.0 try that....
Next thing I'd suggest (with note plugged in while in download mode)....go into device manager (right click This PC)
Find device under Modem, open properties Ports tab, Advanced Settings and manually change the port setting to a lower port assignment (preferably between 1 & 5). Reboot pc and just for kicks reset the phone into Download Mode again....Give odin a try now.
Hope one or a combination of these methods help.
Sent from my [device_name] using XDA-Developers Legacy app

Ebay G7 Sprint No download mode/ No MTP

Hello there, i buy some lg g7 g710 sprint variant, two of these had bad usb port, the pc doesnt recognize them and shows slowly charge, the third doesnt show nothing, charges normal but when i connect it to pc doesnt appear mtp options, also i have tried usb debugging, select usb mode (nothing happens), factory reset, and the phone dont go into download mode even if i press up volume button.
There maybe will be a usb problem or sprint block the access of the phone or what happen here? The usb thethering is grey, tried different cable, pc, etc.
Sorry for my english, please us can help me, i need to know what happen here or i make a dispute in ebay for defects phones
I know there are other posts but never found the solution, the only i see is using adb restart recovery but i cant use adb since it doesn't connect to pc

Categories

Resources