Develop Bugs

Firetv Stick stuck on firetvstick logo Help?

Ive got Amazon Fire TV STICK, its Stuck on Orange Firetv Stick logo. Ive tried go access safe mode by press Rightmouse and the back button no luck. Ive connected it to my mac via usb and ran adbfire 1.17 i can reboot and access recovery mode. but when i try recovery mode it just goes to software update failed and reboots after two mins. Any help would cool? I am in the uk so cannot return the device as was purchased from a staples store on holiday.

Fire TV Stick stuck on white "amazon" logo

I was attempting to install the TWRP recovery for my Fire TV Stick. It shows the two options to boot, but does not respond to my remote. When it counts down and automatically boots normally, it gets stuck on the "amazon" logo. I only have ADB access the five seconds it counts down before booting.
I really hope you guys can help me. I've looked everywhere and tried everything I can before asking for help on here. So far I've only found guides to recover from bricks stuck on the "Fire TV" logo, not this.
I really appreciate it.

FlashTheFox said:
I was attempting to install the TWRP recovery for my Fire TV Stick. It shows the two options to boot, but does not respond to my remote. When it counts down and automatically boots normally, it gets stuck on the "amazon" logo. I only have ADB access the five seconds it counts down before booting.
I really hope you guys can help me. I've looked everywhere and tried everything I can before asking for help on here. So far I've only found guides to recover from bricks stuck on the "Fire TV" logo, not this.
I really appreciate it.
Click to expand...
Click to collapse
I think the white Amazon logo pops up before the boot screen, but if you can get to the boot screen here's what you do:
First, you can't use your remote on the boot screen. With the stick plugged in to your tv's hdmi port, plug its usb cable into your computer. If you get to the boot screen, and if adb is working properly, you'll be able to type adb shell and press enter then type mouse and press enter.
Now press D and enter. Now you should see Launch Recovery highlighted. After the countdown finishes you should be in TWRP and you'll be able to push and install a ROM.

notsed said:
I think the white Amazon logo pops up before the boot screen, but if you can get to the boot screen here's what you do:
First, you can't use your remote on the boot screen. With the stick plugged in to your tv's hdmi port, plug its usb cable into your computer. If you get to the boot screen, and if adb is working properly, you'll be able to type adb shell and press enter then type mouse and press enter.
Now press D and enter. Now you should see Launch Recovery highlighted. After the countdown finishes you should be in TWRP and you'll be able to push and install a ROM.
Click to expand...
Click to collapse
Thank you so much! I managed to move the mouse to the right through adb shell and launch recovery. Everything's up and running now with SuperSU root, TV GAPPS, XPOSED, Busy Box, and all my apps!
Cheers, and Happy Holidays!

Hello I plug my amazon stick and it's stuck on the white amazon logo, is my amazon stick no good? or can I fix it? How,please?

notsed said:
I think the white Amazon logo pops up before the boot screen, but if you can get to the boot screen here's what you do:
First, you can't use your remote on the boot screen. With the stick plugged in to your tv's hdmi port, plug its usb cable into your computer. If you get to the boot screen, and if adb is working properly, you'll be able to type adb shell and press enter then type mouse and press enter.
Now press D and enter. Now you should see Launch Recovery highlighted. After the countdown finishes you should be in TWRP and you'll be able to push and install a ROM.
Click to expand...
Click to collapse
I can get to this recovery screen at the top of this page: http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
But, how do we get a proper ADB connection? I tried a USB to USB cable to my laptop but it cannot detect the device?

Stucked at AMAZON LOGO can't get into recovery

Hello. My fire phone started to freeze so i restarted him but now phone reboots and can't reach fire logo, just stopping at amazon logo. ADB doesn't recognize my phone and i can't acces recovery/fastboot mode with button combination. Any help? I am under warranty if i couldn't fix it

Philips 55PUS7909/12 is stucked in BootLoop

Hello everyone,
I have Philips 55PUS7909/12 and it is stucked on Philips Logo and after a few seconds, it restarts again with the Philips Logo. The TV is stucked in bootloop. I have already tried the Joypad Down key to enter into recovery mode but unfortunately it cannot enter into Recovery Mode. Tried with latest firmware in "upgrades" folder and also in root folder but no luck. Then I tried with USB A-A cable but "adb devices" returns nothing. I'm out of options. Can anybody help me to tackle this problem?
Thanks in advance

Hi
I have the same tv. Same things happened to it. Apearently that is the core level of problems. Which Tv brings itself to the Protection mode. You only see the philips logo. And tv shuts and opens up continuesly I guess. At this level tv doesnt allow you to use the joystick for Bootlader, dont worry about it. Also it may not allow you to see it as a device in adb. will tell you there is no device million times. I hope you find solution soon.

Amazon Fire TV 2 and TWRP

Hello,
I just joined the forum this morning and wanted to say hi to everyone. Hopefully someone can help me here. I have an Amazon Fire TV 2 and it has been rooted and I have Teamwin Recovery Project 3.0.0-5 on it. It has been working for years, but one day a few months ago, I switched the TV input to the Fire TV and just saw the Teamwin splash screen sitting there and blinking. I disconnected the Fire TV and connected it to another TV and it booted up normally, however, without the option to select Boot Normal or Launch Recovery. I then disconnected the Fire TV again and reconnected it to the original TV, it did not boot and got stuck at the splash screen again. Finally after numerous attempts at restarting the device, it booted (without the option to choose Boot Normally or Launch Recovery). I used the Fire TV for a month or so and have restarted it a few times and always was able to get in, but still without the option to Boot Normally or Launch Recovery.
Last night, I was watching a movie and it ended. I tried to use the back button on the remote to go back to my Emby server to watch another show. The Fire TV was not responding and I did not see the white light on the Fire TV at all, but I still had the picture of the finished movie on the screen. I pulled the power plug on the Fire TV and plugged it back it. I'm back to the Teamwin splash screen and it just sits there and blinks every few seconds or so. I never get beyond it and cannot get back into my Fire TV. The white light on the Fire TV also blinks slowly.
I saw a post about the Fire TV 1 and a new 3.0.0-7 recovery that is supposed to resolve that issue, but I did not see anything for the Fire TV 2.
Anyone have any ideas or suggestions?
Thanks,
Chris

AFTV2 as in Model DV83YW? (found on the bottom of device).
If so, I've found that sometimes a faulty power cable can cause this kind of behaviour - try plugging the device into the wall & a computer/laptop (at the same time) with a USB-A to USB-A cable - for some reason allows the box to draw enough power to boot if the power supply is faulty.
If this doesn't work your power supply is probably fine - you could probably re-flash the pre-rooted rom and it would probably boot again, but honestyly I'd recommend unlocking your bootloader via the unlock.zip method (found here: https://forum.xda-developers.com/t/unlock-root-twrp-unbrick-firetv-2-sloane.4222331/) if you're running FireOS 5.2.7.2 or below, or the brick method if running 5.2.7.3 or above.
Of course, you will need to backup your /data partition via TWRP (to a external SD), but I think this is the best option for future proofing & would allow you to recover from something like this a little easier if anything were to happen to your AFTV in the future.

Thanks for the reply. Don't think it is the power cable as I have another power cable I had purchased a while back and it does the same thing with that, but I'll still try connecting it top the computer and see what happens.
I'll also try the methods you linked. Unfortunately, since I cannot boot into the Fire TV, I cannot determine what version of FireOS I'm running.
You mention backing up via TWRP, but I can't get into TWRP, that's the issue. It just sits there with there with the TWRP splash screen and it blinks. No options to boot normally or boot into recovery.
I try what you suggested and report back.
Thanks again,
Chris