first of all i shoud state im over in the UK using SKY mobile(02 signal). So I picked up a used S9 last week and every thing seemed ok but i could not understand why is would not update from android 8 to 9. it turns out is a grey import sm960u USA phone and would not update unless the orig carrier sim was in and i was in the usa. i checked its imei and belived it to be on sprint SPR and downloaded the latest firmware and installed via odin. Now the phone will now not connect to my 4G, i have now found out that Sprint uses CMDA and not GSM that i require in UK .Stupidly i did not check which frimware version the phone was running before flashing it. Is there a USA firmware i can install which will get me back on 4g, maybe without carrier bloatware. i understand that i cannot flash it with sm960f firmware but maybe able to use sm960u1 firmware as this is the plain unlocked version
sm-g975u unlocked att phone wanting to change to tmobile. I have a tmobile sim and had originally plugged this in. The phone works fine but I recently noticed it has no Ota updates occurring. I would like to load tmobile firmware on it to enable some of the tmobile features as well but primary concern is ota updates.
the service provider sw ver.
SAOMC_SM-G975U-OYN-AT-PP-0033
ATT/ATT/ATT
BUILD NUMBER
PPR1.180610.011.G975USQS1ASD9
Ap/CP:G975USQS1ASD9
Csc:G975UOYN1ASD9
Last update may 2019
When I try says fully updated when I put it on samsung switch it says fully updated
Can this be done?
What firmware do you suggest?
Csc *#272imei#(may have that wrong) but is recognized and does work not sure when and what to use here, many options.
Also, not sure of the answer here, but if I run an update or csc change (the phone is unlocked) would it require me to unlock it again for any reason?
I am trying to get the phone close to a tmobile if that is possible
Thank you in advance if i need to give more info please let me know.
Download the firmware of your current network and flash you will begin to receive updates. However you can also flash the unbranded one which is G975U1 and you will still receive updates too
Can you give directions on how to get the firmware for the current network and how to flash the phone? I have an SM-G975U that is on SPR that I need to get to ATT so it will get updates from cricket. I have found a lot of materials on the internet and not a single one shows all of the steps clear enough for me to risk blowing up my phone. I have found the SPR files and TMK, and USA, and TMB, but no ATT.
Hello everyone.
I just bought what I thought it was an unlocked S20 Ultra over the internet and, nevertheless my sim card form my country works well (Im from México) the OTA updates dont work.
The last security update it has is from March 2020 and I have checked the system update option but it says that my phone is up to date.
I have seen that maybe that the most recent update can be forced using Odin but I dont know what firmware to download for my model so it can be updated regularly via OTA as I only have found firmware options for another USA Carriers that I dont have, and Im scared to brick it for choosing the wrong one.
Curiously enough, the phone model and IMEI correspond to the AT&T USA variation, however, the start up screen doesnt show up any AT&T logo and the phone doesnt have any bloatware from any carrier. So Im not sure if the phone was already flashed with some fw?
The model that it displays is SM-G988U and the S/W is G988USQU1ATBN'
Hope you can help me to have updates on my phone.
Thanks!
jonalara said:
Hello everyone.
I just bought what I thought it was an unlocked S20 Ultra over the internet and, nevertheless my sim card form my country works well (Im from México) the OTA updates dont work.
The last security update it has is from March 2020 and I have checked the system update option but it says that my phone is up to date.
I have seen that maybe that the most recent update can be forced using Odin but I dont know what firmware to download for my model so it can be updated regularly via OTA as I only have found firmware options for another USA Carriers that I dont have, and Im scared to brick it for choosing the wrong one.
Curiously enough, the phone model and IMEI correspond to the AT&T USA variation, however, the start up screen doesnt show up any AT&T logo and the phone doesnt have any bloatware from any carrier. So Im not sure if the phone was already flashed with some fw?
The model that it displays is SM-G988U and the S/W is G988USQU1ATBN'
Hope you can help me to have updates on my phone.
Thanks!
Click to expand...
Click to collapse
Your device is a US Branded Variant, most likely Verizon/ATT. Go to Settings, About Phone, Software Information, Service Provider Software Version. On the bottom row the last three letters will verify which carrier is branded. If it is in fact AT&T you can download the appropriate fw here. Be sure to select the appropriate carrier in the drop down menu but be aware AT&T typically doesn't offer it's firmware to be accessed online.
Download Samsung Galaxy S20 Ultra SM-G988U TMB USA (T-Mobile) G988USQU1ATBN firmware
Fast download latest Samsung Galaxy S20 Ultra firmware SM-G988U from USA (T-Mobile) with G988USQU1ATBN and Android version 10
www.sammobile.com
You MAY need to be on AT&T's US Network to receive OTA Updates but you should have no problem making and receiving calls and texts in Mexico.
varcor said:
Your device is a US Branded Variant, most likely Verizon/ATT. Go to Settings, About Phone, Software Information, Service Provider Software Version. On the bottom row the last three letters will verify which carrier is branded. If it is in fact AT&T you can download the appropriate fw here. Be sure to select the appropriate carrier in the drop down menu but be aware AT&T typically doesn't offer it's firmware to be accessed online.
Download Samsung Galaxy S20 Ultra SM-G988U TMB USA (T-Mobile) G988USQU1ATBN firmware
Fast download latest Samsung Galaxy S20 Ultra firmware SM-G988U from USA (T-Mobile) with G988USQU1ATBN and Android version 10
www.sammobile.com
You MAY need to be on AT&T's US Network to receive OTA Updates but you should have no problem making and receiving calls and texts in Mexico.
Click to expand...
Click to collapse
Thank you. I just checked and the last three letters are indeed ATT. That means that most likely I cant have fw updates or OTA updates as they dont offer their fw online? Searched on the website yu gave me but there is no ATT carrier option
jonalara said:
Thank you. I just checked and the last three letters are indeed ATT. That means that most likely I cant have fw updates or OTA updates as they dont offer their fw online? Searched on the website yu gave me but there is no ATT carrier option
Click to expand...
Click to collapse
You're most welcome. Verizon is in the drop down menu and since they've merged with AT&T it should be the appropriate FW but it doesn't load after selecting it which reflects AT&T's ongoing efforts to block updates outside of it's proprietary platform. If you're unable to access AT&T's network inside the US the other options are downloading the FW on Samsung's Smartswitch app or acquiring it on ATT/Verizon website. Good luck!
Hello,
My service provider is t-mobile. I'm trying to swap my at&t S20 ultra SM-G988U to an unlocked firmware but I'm not sure which SM-G988U1 to choose. Any suggestions? Do I choose U1 USA or U1 USA\T-mobile? I thought U1 were all unlocked so I'm not sure what U1 USA\T-mobile is or if I should choose that
Thanks
I put U1 USA\T-mobile version 11 on and was able to get OTA updates to version 12. I tried flashing a newer version of 12 with a XAA CSC but it didn't take, Odin said pass but nothing changed, still 1 patch behind and CSC was TMO. So I left it alone. A problem for another day... if TMO stops patching it. The phone is on samsung firmware now and it works great. Just 1 patch behind.
I would appreciate if anyone can point me to the right direction. I have 21FE G990U2 from AT&T, It is unlocked by AT&T.
All I need is working T-Mobile firmware or Samsung (no carrier branding) to flash. I tried multiple versions of U, U1 and U3 firmwares (all matching my current Binary -4) but no success.
I just would like to get rid of ATT bloat. I know I can uninstall it via ADB but I rather have firmware clean of it.
Any suggestion please?
Thanks
So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link by clicking on "Download Samfw server" (G990U2OYN4EWC3, April 2023 update):
Download Galaxy S21 FE 5G SM-G990U2 (TMB) G990U2SQS4EWC3 in Samfw - Samsung firmware download
Galaxy S21 FE 5G SM-G990U2 (TMB - United States) G990U2SQS4EWC3 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.
Shuhan44 said:
So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link directly (G990U2OYN4EWC3, April 2023 update):
https://02-samsung.cloud/v2/IxJCDiMnLh8SLAo5IRtBAzwDMyMyCB4lFzssIDs2ByAzMUEgOzEUQDMQMCMBOyw/LiUzJjIXCDkuJC8/NDseIy8xIQYzOAIlPDAVHRIvMz81CAIkMwsuOB42FA00Nh4LNS8vFjIXLA0NFzE/PAMeOTMADTkDAC4mNBEaMCExQQEhJQUUHjFCMTs4BkIjCyI/Iws8MQEWCDAeCw0xCREHOTQbIyshAD4OIQAGLC44Hiw0ER4OMiUzLDIlDSs8AD4fJhsGOg8HCkA8AywnCRc+Di8LBxAzBy4RDxYpKTwkHjUeBylCJgceKTIXIUAJER4OMi8+AwMSMBsBAzY5LwNBJi8IMAQ4MTQUAQMgLyMsHjM7JDMHLzEjJDgAISk8PxQ9NTggQiYbLyUhJCEpMjsHJzw2KSceFy4QIzEvKw8WIAYhFh4JMjAeLDQsLCM0Gy45IzgGQiMDPB0jJCI/ARYFMCMiExM=
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.
Click to expand...
Click to collapse
You are correct - I need T-Mobile (or carrier free) so I can utilize full carrier settings.
Thanks for the link, however above link gives an error when opening the page.
Nevertheless I will look for TMB firmware with CSC: G990U2OYN4EWC3 and post an update here
Flashed that and still has AT&T boot logo and all the apps
h078 said:
Flashed that and still has AT&T boot logo and all the apps
Click to expand...
Click to collapse
Well, I am sure that you have flashed by a Factory reset (Flashed CSC, not Home CSC in ODIN). The boot logo can be changed by rooting your device, also bloatware apps can be deleted via ADB command without rooting.. but you already have mentioned that you prefer not to proceed with those processes. So I am out of suggestions, sorry.
Just for my knowledge, after flashing the TMB firmware, now your settings> About phone> software information> service provider software version: 2nd line shows as TMB/ TMB/ AT&T?
(Also corrected the download link in my previous comment anyway).
Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies
h078 said:
Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies
Click to expand...
Click to collapse
I do not get why the CSC can never be changed, even after flashing the complete firmware... must be an ATT thing!
Anyway, to change the csc only, there is another very quick & easy method. It takes only 2/3 minutes; no flash or factory reset is required. You have to download and install a small software "SamFW Tool" on your pc/laptop (may need to disable the antivirus during the download/install process). Once done, connect the phone and enable USB debugging mode. Open the software, under the ADB tab, click Change CSC, from the dropdown list select TMB and click Change. The phone will restart and CSC "Should" change to TMB/TMB/ATT.
Here is the download link for the software:
https://www.mediafire.com/file/upaiwadhmstm6js/SamFwToolSetup_v4.6.zip/file
That did the trick. I have T-Mobile CSC now
Thanks a lot
h078 said:
That did the trick. I have T-Mobile CSC now
Thanks a lot
Click to expand...
Click to collapse
Great!
But still, that's only one part of the final solution I think. Your target was to replace the complete firmware from ATT to TMB, right? Since the CSC is now changed to TMB, I think you can give it another try via ODIN to install the TMB firmware now (only if you want). I am not confident that it will work now, but still, one last try should not be much of a hassle.
I think that these multi CSC contain all US carrier customizations....When I changed it to TMB it shows TMB/TMB/ATT and loads bootlogo as well as TMobile apps... I guess it is similar as Blackberry used to be back in the days...Depending which carrier SIM used it loaded proper settings from the firmware...
I have flash my METROPCS G990U2 to G990U3,other sim card work fine,but t mobile sim card does not work ,can someone help me?I already change CSC to xxa,but still no internet,I do have sginal bar