Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
Hello!
Who tried to put? http://www.miui.com/thread-4493044-1-1.html
whether there are problems in this firmware?
I tried the version found at http://en.miui.com/thread-317888-1-1.html Works fine on my Helium after I applied 0630.zip for the Helium modem and other stuff.
Things I noticed are...
A lot more configurable than CM version 2 I was using previously
3G and GPS seem works well
Had to use Titanium backup to get rid of a few chinese apps
Lost double tap to wake
Video part of camera still doesnt work
....
Hi.
Can you link the 0630 zip please? And ideally expand on what else you did please?
I had a nightmare being too brash installing a hydrogen ROM from my helium phone!
no video recording and a fixed statusbar on this release of cm13 sucks.
sutur said:
Hi.
Can you link the 0630 zip please? And ideally expand on what else you did please?
I had a nightmare being too brash installing a hydrogen ROM from my helium phone!
no video recording and a fixed statusbar on this release of cm13 sucks.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B131_m9OowbCMlRzRldPenhXRDA/view
My cellular data doesn't seem to be working...Everything else is OK. Any tips how to fix it?
how to increase speaker volume in this rom
mush2004 said:
how to increase speaker volume in this rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67352761&postcount=29
Hi guys!
I'm using Lenovo P2 with custom ROMs from a couple of years.
I've used LineageOs for years. Now, after updating to LineageOs 16, I've tried Havoc 2.9 I'm facing this issue (I don't know if this issue is present with stock roms or with other roms): I have push notification from all the main apps (like WhatsApp, Telegram and Messenger), but not from the alarm system app I use in my house.
On a Xiaomi Redmi Note 4 with stock rom, notification from this app works fine.
Could it be something related to custom ROMs or Gapps or anything like this?
Thanks in advance for the reply!
I was using custom roms for months/a year on my oneplus9pro, however approx 3 weeks ago certain apps such as banking and a secure code app I use for work stopped working due to root issues, my rom was not rooted, however it just seems any custom rom caused this error. I've been back on Oxygen OS for the time being and I am wondering now if this has been resolved or are people still getting the errors?
Thanks
Can you supply more Information, with the aim of someone more knowledgeable helping you out.
Which custom ROMs gave you the errors ( so that the issues can then be raised with them ).
All custom ROMs gave me the error. I had it with Android 13 custom ROM' and then I'd drop down to Android 12 and had the same errors. I googled it at the time and saw it was a global issue for all custom roms on oneplus etc, but not seen anything since.
I have a European Oneplus 9 pro. I just want to know if anyone else is able to use banking apps now?
I use T-Mobile banking and it's working. Are you passing safety net on those roms?
luckylui said:
I use T-Mobile banking and it's working. Are you passing safety net on those roms?
Click to expand...
Click to collapse
I believe that is the issue. Everything was fine and then one morning I got hit by these errors. I flashed a couple of ROMs and same errors. But if yours are working then hopefully mine will too. Are you on Android 13 or 12?
Dizzee87 said:
I believe that is the issue. Everything was fine and then one morning I got hit by these errors. I flashed a couple of ROMs and same errors. But if yours are working then hopefully mine will too. Are you on Android 13 or 12?
Click to expand...
Click to collapse
I'm on 12. Google search Universal Safety Net fix and install it through Magisk. That should do the trick and also enable Enforce Denylist then go into the Configure Denylist and enable your banking apps in there as well. Hope that helps! I have the 2127 T-Mobile 9pro converted to the 2125 Global version.
Dizzee87 said:
I was using custom roms for months/a year on my oneplus9pro, however approx 3 weeks ago certain apps such as banking and a secure code app I use for work stopped working due to root issues, my rom was not rooted, however it just seems any custom rom caused this error. I've been back on Oxygen OS for the time being and I am wondering now if this has been resolved or are people still getting the errors?
Thanks
Click to expand...
Click to collapse
I`m using First Direct / Tesco / Barclaycard . . NO Issuse
Dizzee87 said:
All custom ROMs gave me the error. I had it with Android 13 custom ROM' and then I'd drop down to Android 12 and had the same errors. I googled it at the time and saw it was a global issue for all custom roms on oneplus etc, but not seen anything since.
I have a European Oneplus 9 pro. I just want to know if anyone else is able to use banking apps now?
Click to expand...
Click to collapse
Check your drivers, someone earlier had
overlay drivers. They took them out and its working
Hello,
I would like to ask a question about a subject that I have been dealing with for weeks.
I have been using Eu beta rom on all my Xiaomi devices for many years. And now i'm using Poco F3 with EU Beta (lastest)..
About 1 month ago, I bought myself a car with Android Auto support. Eu rom is working fine except 1 issue on car screen. There are several programs on the multimedia device that can be used to play the screen of the mobile phone and/or the files on the connected mobile phone. The most famous and beautiful employee (youtube and web browser supports) is a program called FERMATA Auto . When installing this FERMATA Auto on the phone, it is necessary to install a tool with the installer program so that it does not get stuck in google blocks. However, although I have done all these correctly, FERMATA Auto does not appear on the vehicle screen while it is working properly on the phone. Other programs that do similar tasks don't work either. Although I tried dozens of times, I couldn't run it, and when I installed and tried this FERMATA on another xiaomi device, it worked on my first try. So I tried switching from eu beta to eu stable to see if the problem is with my device or the rom, but it still didn't work. When I installed Pixel expirence and tried it on the same day, it worked again on my first try. I think there is something in the rom that is preventing this. Especially because of call recording and continuous support, I don't plan to switch to another rom other than EU rom.
Anyone have any ideas on this?
FARMATA, FATMATA, FERMATA… which one is it?
Yes, same issue with stock miui and Android auto
kurtschmeichel said:
FARMATA, FATMATA, FERMATA… which one is it?
Click to expand...
Click to collapse
So sorry. I correct it. So it's FERMATA Auto
amarprat87 said:
Yes, same issue with stock miui and Android auto
Click to expand...
Click to collapse
I try with my friend Poco X3 with stock rom and it was working with my car. Also Pixel rom is working with my Poco F3 and my car. :-o