Related
Everytime i try and flash the stock image in fastboot it fails when it gets to anything pertaining to the bootloader
FAILED (remote: Do not allow to flash Bootloader image on Unlock device)
My device is unlocked but to try and compat this i even try to re-lock the device which also fails:
FAILED (remote: oem lock back is forbidden)
Im stuck, i cant use the flashall because it fails, i cant individually flash files because the bootloader items fail,
im at a loss as to what to do.
Im able to flash a custom recovery but i cant do anything with it, except try and flash modem items with twrp which also did nothing.
brother, i am sorry for your condition , i dont have much knowledge on such things, but i once had MotoG, i used to flash Stock files with this method..
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
if you are flashing Stock files, then Bootloader need not to be stayed UNLOCKED..
hope you get any idea from there.. all the best
---------- Post added at 11:25 AM ---------- Previous post was at 11:23 AM ----------
look in to this also :
https://forum.xda-developers.com/mo...e-restore-moto-e-2015-stock-firmware-t3054303
this might give u anyidea
Did you have TWRP installed before you tried to flash stock Rom ? I'm guessing thats why its failing , but i dont know how to fix
maybe you're trying to flash older version of bootloader than the one you've already got? besides you don't need to flash bootloader to lash the rest, like system, modem or kernel
Okay so i know what my problem is i just dont know how to solve it:
I have a partially unlocked bootloader. is i do the fastboot oem device-info command, it tells me that my bootloader is unlocked but im unable to flash bootloader images (Device critical unlocked: false)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem device-info
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Device Secure boot: yes
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.080s]
finished. total time: 0.081s
Does anyone know how to get Device critical unlocked: true?
I stuck in the bootanimation and i cant flash a stock rom because there is no such thing. I found one, but this is no flashable zip. And the "flashall.bat" doesnt work. CM also doesnt work. I dont know what to do now.
Edit: Now i dont get into twrp recovery. With adb and with the hardware its not possible to enter twrp.
Did anyone found any solution? I am in same situation...
Found
flash only boot and system, not bootloader
finally while Flashing stock, i am stuck at Bootlogo looop
any suggestions??
i tried unrooting my RR 7.1.1 but with the zip provided , i think it failed..
any way to clean flash / freshly load stock again !!
nandakis4 said:
finally while Flashing stock, i am stuck at Bootlogo looop
any suggestions??
i tried unrooting my RR 7.1.1 but with the zip provided , i think it failed..
any way to clean flash / freshly load stock again !!
Click to expand...
Click to collapse
if you have the stock rom just follow the trouble shooting guide at the start of this thread , should work
Hi, thanks for replying..
flashed the files again,
Boot, recovery, then systemchunk files, REBOOT..
its still bootlooping, i think i am missing any file that needs to be put, but i am not putting .. !!
any more suggestions ??
nandakis4 said:
Hi, thanks for replying..
flashed the files again,
Boot, recovery, then systemchunk files, REBOOT..
its still bootlooping, i think i am missing any file that needs to be put, but i am not putting .. !!
any more suggestions ??
Click to expand...
Click to collapse
I am having the same issues:
I cannot flash anything pertaining to the bootloader, this is the official flash list, open fastboot and paste this entire list, when its finished you will see "failed" next to anything pertaining to the bootloader. And therein lies the issue, i havent found a soloution and ive been searching for 2 months now
fastboot flash partition gpt_both0.bin
fastboot flash sec sec.dat
fastboot flash apdp dp_AP_signed.mbn
fastboot flash msadp dp_MSA_signed.mbn
fastboot flash prov prov32.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash devcfg devcfg.mbn
fastboot flash devcfgbak devcfg.mbn
fastboot flash lksecapp lksecapp.mbn
fastboot flash lksecappbak lksecapp.mbn
fastboot flash tz tz.mbn
fastboot flash tzbak tz.mbn
fastboot flash keymaster keymaster.mbn
fastboot flash cmnlib cmnlib.mbn
fastboot flash cmnlibbak cmnlib.mbn
fastboot flash cmnlib64 cmnlib64.mbn
fastboot flash cmnlib64bak cmnlib64.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash logo logo.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system systemchunk0.img
fastboot flash system systemchunk1.img
fastboot flash system systemchunk2.img
fastboot flash system systemchunk3.img
fastboot flash system systemchunk4.img
fastboot flash system systemchunk5.img
fastboot flash system systemchunk6.img
fastboot flash system systemchunk7.img
fastboot flash system systemchunk8.img
fastboot flash system systemchunk9.img
fastboot flash system systemchunk10.img
fastboot flash system systemchunk11.img
fastboot flash system systemchunk12.img
fastboot flash cache cache.img
fastboot erase userdata
FYI i have unlocked my bootloader, and it wont let me lock it again
@nandakis4 Did you manage to solve your issue?
@itsjustbilly Why are you flashing the bootloader? It will fail if it's unlocked.
I'd want to go back to stock to start off fresh, but these are some discouraging stories.
cyrrrinda said:
Found
flash only boot and system, not bootloader
Click to expand...
Click to collapse
Please confirm if you were able to revert to MM without losing your signal.
Edit: It crossed my mind just now. TWRP has the ability to backup the modem so surely you could use it if you were to have problems with the signal later? Provided you can access the recovery of course, but that doesn't seem to be a problem in most cases.
qcn backup
Hi here is qcn backup from working phone. To go to engeneering mode you have to press ####8899#. Smaller is from qfil tool, bigger is from qpst tool (software download). When I restored, I am back on internet 4G, can make or receive calls, BUT NO SOUND from speaker and MIC not working so. Any idea?
cyrrrinda said:
Hi here is qcn backup from working phone. To go to engeneering mode you have to press ####8899#. Smaller is from qfil tool, bigger is from qpst tool (software download). When I restored, I am back on internet 4G, can make or receive calls, BUT NO SOUND from speaker and MIC not working so. Any idea?
Click to expand...
Click to collapse
Do 2G and 3G work? My phone can detect 4G, but not 2G and 3G.
You've probably solved the sound issue by now, otherwise have a look at this thread.
Hello all,
I'm a bit confused about the process of taking my current '3' ROM and changing it to the official Lenovo Rom.
I have downloaded the lenovo drivers (installed and ok) phone is in debug mode.
I have downloaded the stock rom from here: https://forum.xda-developers.com/lenovo-p2/development/7-0-lenovo-p2a42-stock-nougat-update-t3581517 and have adb / fastboot.
I know I have to use the volume rocker and powerbutton to get into the boot mode but I don't know the commands for adb or fastboot. I have changed the name of the rom to 'update'
Can someone please advise me on the commands I am meant to enter to get this onto my phone please?
Thanks in advance,
Cue
Copy all the code below, paste it to a new text file on your PC and save it as All Files instead of .txt and name it a fastboot.bat. Place the fastboot.bat in the adb/fastboot directory, also place the unpacked rom in the same path. Run it as admin. Profit.
Code:
fastboot flash partition gpt_both0.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash system systemchunk0.img
fastboot flash system systemchunk1.img
fastboot flash system systemchunk2.img
fastboot flash system systemchunk3.img
fastboot flash system systemchunk4.img
fastboot flash system systemchunk5.img
fastboot flash system systemchunk6.img
fastboot flash system systemchunk7.img
fastboot flash system systemchunk8.img
fastboot flash system systemchunk9.img
fastboot flash system systemchunk10.img
fastboot flash system systemchunk11.img
fastboot flash system systemchunk12.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo pause
Hi, op here.
Firstly, thank you for responding! Your instructions seem very clear. When i had a look at the contents of the ROM (in zip) i couldn't see any of the systemchunk files you mention, are they hidden deep somewhere?
Regards,
Cue.
If your phone is stock the Rom can be updated without fastboot or a PC.
All the instructions are in that thread.
Huh. Surely just boot into recovery and install the update.zip? No need to have it connected to pc.
Hello all,
Yep. I un-encrypted the sd card copied the zip onto it and booted up that way. Very easy. Now running stock directly from Lenovo which I am very happy about! It also pushed the new 78mb update as well.
Thank you for all your input.
same way i did it too theirs no need to do it through fastboot method just like the other people i did it through the built in recovery by renaming the Nougat rom to update.zip works fine and you will get another update ota straight after t obring it right up to date.
Sounds like you guys have this sorted :highfive:
Just for completeness, can somebody upload the original 3 rom? It just helps out the person who thinks they have a hardware issue and may need to return the phone to 3.
If you try and return your phone and it doesn't have the original 3 rom, your chances of a good outcome are obviously less as you have tampered with the phone etc.
The warranty is with Lenovo Not three.
Doubt there'd be an issue as the bootloader will still be locked and it's an official Lenovo Firmware.
Since flashing nougat and a factory wipe my VOLTE is now working.
I did the same flashed nougat and volte is working but only shows up some times not as much as I'd like is their any way to get volte to work more often. In my bedroom where the signal is weak I don't get the volte symbol at all.
philje123 said:
The warranty is with Lenovo Not three.
Doubt there'd be an issue as the bootloader will still be locked and it's an official Lenovo Firmware.
Since flashing nougat and a factory wipe my VOLTE is now working.
Click to expand...
Click to collapse
How you enabled VoLte on nougat? You are on stock rom or branded?
I'm on stock unbranded.
VOLTE settings now show up in phone menu and it just works. I had to factory reset though as initially it didn't work after flashing nougat.
hey
please i want help i want stock rom for moto g5 XT1676 to unbrick by blank-flashing and how do it in steps on my dead phone
sorry for bad english
my phone moto g5 rooted when i try to unroot by minimal adb past wtong stock rom in Minimal ADB and Fastboot folder when i intered command and i pasted this order :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
//////////////////////////////////////////// after this step ended my phone not strat or boot /just white led blinking when connected by charger
mention / my phone is moto g5 xt1676 rooted but i flashed this stock CEDRIC_NPP25.137-93_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,forMotor ola Moto G5(XT1672) but my phone Motorola Moto G5(XT1676) please help me
If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
TheFixItMan said:
If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
Click to expand...
Click to collapse
after i did this steps and finshed the last command the phone not open
waleedzzz said:
after i did this steps and finshed the last command the phone not open
Click to expand...
Click to collapse
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released
TheFixItMan said:
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released
Click to expand...
Click to collapse
i soloved by this method These two files are those that are damaged when doing downgrade on your G5 bike
therefore here I leave you the most updated
so that the flashees and your phone can light up without the SD
if you flash these two you will not need to flash a complete firmware
Just open the folder that says Fastboot and click on the MAF32.exe file or START.bat
Once there you will insert the micro sd on your g5 motorcycle and turn it on in fastboot mode and take out the sd
and then connect your motorcycle g5 that is on and flash these commands
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
and that would be everything and you could start your phone without the micro SD
the link to slow
friends, how are you?
It's the following .. I have a serious problem with my Moto G5.
When he went to do the update for Oreo he gave a problem ... Of which I can not leave.
It starts in fastboot mode or attempts to initialize Android but stops on screen (M) as picture.
The bootloader is locked, I tried to unlock by cmd and put the key sent by the motorola, signaled as if it worked and continues as (oem_locked).
I do not have root, my bootloader is locked, and I can not access recovery despite entering fastboot mode.
I tried installing several roms by adb, but I could not succeed with any (Always giving FAILED REMOTE).
Yesterday until it managed to enter the initial configuration of the android (where it places the wifi) but then restarted and never again.
I've tried everything a little bit, and I could not succeed with anything.
Help me, please, I do not know what else to do!
Thank you
:confuso:
You have a few options
The first is just wipe the phone and see if it boots
You can do this by putting the phone in bootloader mode (as per your screenshot) by holding Vol down & power button
Then in cmd/terminal window where you have fastboot on your pc type
fastboot erase userdata
Note this will delete everything on internal storage!
Then select the boot normally from bootloader menu
Another option is to flash the entire firmware via fastboot
You will need firmware which is the same or newer than what you currently have
You don't need an unlocked bootloader to flash stock firmware via fastboot
Note fastboot is different from adb - adb won't work in fastboot mode!
.....
My friend, I made the process using the rom of https://forum.xda-developers.com/g5/how-to/official-oreo-8-1-0-opp28-85-16-t3849244 except that excluding the (fastboot flash partition gpt.bin and
fastboot flash bootloader bootloader.img).
Similarly, the screen continues with the motorola logo, does not advance to android, recovery when I select and tighten the power, stay on the motorola screen and back to the fastboot.
The result of the process is this in the image
TheFixItMan said:
You have a few options
The first is just wipe the phone and see if it boots
You can do this by putting the phone in bootloader mode (as per your screenshot) by holding Vol down & power button
Then in cmd/terminal window where you have fastboot on your pc type
fastboot erase userdata
Note this will delete everything on internal storage!
Then select the boot normally from bootloader menu
Another option is to flash the entire firmware via fastboot
You will need firmware which is the same or newer than what you currently have
You don't need an unlocked bootloader to flash stock firmware via fastboot
Note fastboot is different from adb - adb won't work in fastboot mode!
Click to expand...
Click to collapse
sonmota said:
My friend, I made the process using the rom of https://forum.xda-developers.com/g5/how-to/official-oreo-8-1-0-opp28-85-16-t3849244 except that excluding the (fastboot flash partition gpt.bin and
fastboot flash bootloader bootloader.img).
Similarly, the screen continues with the motorola logo, does not advance to android, recovery when I select and tighten the power, stay on the motorola screen and back to the fastboot.
The result of the process is this in the image
Click to expand...
Click to collapse
You need to flash the ENTIRE stock firmware and it MUST be the same or newer than the version already on the phone
Plus you missed sparsechunk0
You got pre-flash validation errors as you are either using the wrong firmware or haven't flash the entire firmware from start to finish
Note if you flash wrong firmware you could potentially hard brick your device
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
....
I'm from Brazil and from what I've been observing the ROM would be with the same bases as this one from the link.
I refined the process using the command lines you posted and "FAILED REMOTE" is repeated in some lines.
Would not it be some case of partitioning the corrupted system?
Follow the pictures below.
TheFixItMan said:
You need to flash the ENTIRE stock firmware and it MUST be the same or newer than the version already on the phone
Plus you missed sparsechunk0
You got pre-flash validation errors as you are either using the wrong firmware or haven't flash the entire firmware from start to finish
Note if you flash wrong firmware you could potentially hard brick your device
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
sonmota said:
I'm from Brazil and from what I've been observing the ROM would be with the same bases as this one from the link.
I refined the process using the command lines you posted and "FAILED REMOTE" is repeated in some lines.
Would not it be some case of partitioning the corrupted system?
Follow the pictures below.
Click to expand...
Click to collapse
Gpt failed because the firmware you are trying to flash is older than what is currently on your phone
Gpt is needed to repartition your phone and must be flashed along with the bootloader
You will need to download firmware which is equal to or newer than what is already on your phone
I saw there was an October update in the ROM. I will try here in the community this ROM and try to blink and bring the result here ..
friend .. I followed the rom .. I did the whole process (without FAILED) but when it starts up it gets frozen in the Motorola logo.
Any tips on what it might be?
TheFixItMan said:
Gpt failed because the firmware you are trying to flash is older than what is currently on your phone
Gpt is needed to repartition your phone and must be flashed along with the bootloader
You will need to download firmware which is equal to or newer than what is already on your phone
Click to expand...
Click to collapse
sonmota said:
friend .. I followed the rom .. I did the whole process (without FAILED) but when it starts up it gets frozen in the Motorola logo.
Any tips on what it might be?
Click to expand...
Click to collapse
As long as everything flashed correctly and the entire firmware had no errors I'd go into stock recovery and perform a factory reset
Hold Vol down & power button
At bootloader menu use volume keys to navigate to recovery and press power button to select
At the Android screen with no command push and hold power button then with power button held then press Vol up
You are now in recovery mode
Use Vol keys with goto wipe data/factory reset & power button to select
If the rom doesn't boot after that chances are you didn't flash the firmware correctly or there was an error in flashing it due to the wrong firmware used
I can not get into recovery. Would not it be a problem with the motherboard?
TheFixItMan said:
As long as everything flashed correctly and the entire firmware had no errors I'd go into stock recovery and perform a factory reset
Hold Vol down & power button
At bootloader menu use volume keys to navigate to recovery and press power button to select
At the Android screen with no command push and hold power button then with power button held then press Vol up
You are now in recovery mode
Use Vol keys with goto wipe data/factory reset & power button to select
If the rom doesn't boot after that chances are you didn't flash the firmware correctly or there was an error in flashing it due to the wrong firmware used
Click to expand...
Click to collapse
sonmota said:
I can not get into recovery. Would not it be a problem with the motherboard?
Click to expand...
Click to collapse
Could well be
As long as gpt flashed successfully without giving a downgrade warning which will call it to fail then the recovery part of the firmware should flash and you should have access to recovery mode via entering recovery from bootloader then holding power button and volume up at the picture of the android screen
It could be a motherboard issue but since you have no problem getting into bootloader it's more likely a firmware issue/user error
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.img picture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Hi Sven,
This isn't going to be the most advanced reply, as I'm not very experienced with this stuff either, but it seems you have accidentally flashed your twrp image to 'boot', wherever that is, which is why the phone isn't able to boot to system.
Can you still boot into bootloader and recovery (twrp)?
If so, then I'd suggest using fastboot to flash a sock or custom ROM. I'm not sure exactly which one though, you have basically the same model as me and that seems to use the JETER ROMS a list of which are over here (can't post links yet, so you will just have to search on mirrors . lolnet . com /firmware/moto/jeter/official/ or remove the spaces
I seem to have somehow lost the partitions on mine, but will start a new thread question about that.
Sven Onderbeke said:
Hi everyone,
I bought a Motorola G6 play model XT1922-3 type 374B and wanted root acces on this device.
So I started by succesfully unlocking my bootloader using the following tutorial.
After this a started tried to root the device using this tutorial.
This tutorial doesn't link to boot images anymore so I was able to find the moto-g6-play-jeter-patched-twrp.img somewhere else.
I did the following things:
- reboot to bootloader [Succesfull]
- fastboot boot moto-g6-play-jeter-patched-twrp.img [Unsuccesfull]
The device did boot the twrp image but I was unable to interact with it in any way. I couldn't swipe or press buttons.
I made a short video to show this.
I wanted to retry the whole thing so I did reboot to bootloader but then I accidently entered the following command:
fastboot flash boot moto-g6-play-jeter-patched-twrp.imgpicture of command prompt
After this I wasn't able to normally boot my device. When I try to do so the screen goes black and says n/a in the left corner.
Please does anyone know how I could either be able to boot my normal stock rom again or to have a rooted rom?
Kind regards Sven Onderbeke
Click to expand...
Click to collapse
Just flash a stock boot.img to boot. Then just flash TWRP to recovery. In TWRP, format data. Type yes. Then reboot recovery. Then Use TWRP to flash magisk. Done.
Hi again Sven,
I just wanted to let you know that I just downloaded the following RETAIL ROM
ALJETER_RETAIL_9.0_PPPS29.55-35-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and used the following fastboot commands, one at a time.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Which rebooted into bootloader so pressed "start" and all booted fine now. It looks like we have the same device, so hopefully that will work for you too.