Related
Welcome to MIUI sGSI For Galaxy J7 2017
TESTED ON J730X
Some information you should know..
This is a fully working MIUI sGSI with Android version 9.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
I don't own any files here, except patch files.
So, we are here with sGSI. It's normally called "unstable" and "not for daily usage" so users are recommended to go for GSI. But GSI lacks features and has AOSP-like design that some users may be bored of that. And now we finally break that law. sGSI can now be used as daily drivers.
As the nature of these sGSI go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES:
Based on MiuiMiX 11 by MMX Team 9.12.26 using ErfanTools
Android 9.0
MIUII 11 Features
Semi-SIM support (Currently one SIM only)
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full MIUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Kernel:
You can choose either latest CronosKernel by @ananjaser1211, or KRAKEN kernel by @SPARTANICUS
Install steps:
ensure you have LATEST TWRP from Here
Download all the files in the DOWNLOAD section
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash Project Spaget 3.0 (not X!) here and follow the steps there.
Flash MIUI-Aonly-9-20191230-ErfanGSI.img to SYSTEM
Flash your desired kernel, either Cronos or KRAKEN (must be using Treble version)
[IMPORTANT] Flash Magisk in order to have patch working
Flash sGSI-Patch.zip
Flash NFC Patch
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
Install Google Play Services apk in Downloads section in order to get setup working
Setup your rom and READ the F.A.Q for more information.
BUGS:
Signal bar doesn't work (always empty) but it's acturally working
FM Radio (No FM Radio app in image)
Only one SIM is working at the moment
VoLTE not working (need another fixes)
SCREENSHOTS:
Imgur
CREDITS:
IF you helped in this GSI and i forgot you, tell me in a PM or in a reply
@ananjaser1211 for his Project Spaget, CronosKernel and HUGE contribution for Exy7870
@SPARTANICUS for KRAKEN Kernel
@SrCDA for his NFC patch
@erfanoabdi for his tools to port GSIs
And the rest of EliteTeam
DOWNLOADS ARE IN POST 2
DOWNLOADS:
Official Treble support Group : Telegram
----------------------------------------------------------------
All files are uploaded here: Google Drive
GSI: Here (My Google Drive acted up and does not let me upload any more files)
FAQ:
Good idea to read this F.A.Q While the rom is installing
Notes:
Q : Brightness bar not working / Camera doesn't work
A : You have flashed Spaget X instead of Spaget 3.0. Reinstall again
Q : Phone doesn't detect any SIM cards
A : Flash latest Cronos/KRAKEN kernel
Q : Everything on my screen is so small [J730 only]
A : Go to Settings > Developer settings > Set screen density to 411
Q : I got front camera stretch
A : Change resolution from 16:9 to 4:3
Q : Can I use front flashlight?
A : No, Samsung has their own libs, for now no apps can use front flashlight. Back flashlight still works
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : the phone wont install any apps
A : Reboot
One more
does the rom have some type of error for daily use
VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work
The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip
What android version is this? Can i flash the official magisk? There's no camera stretch bug? Like other gsi rom?
gabriel.oliveira.brito said:
The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
Click to expand...
Click to collapse
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
gabriel.oliveira.brito said:
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip
Click to expand...
Click to collapse
Thanks for noticing, I forgot to rename the file.
NindoS said:
VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
Click to expand...
Click to collapse
I don't use VoLTE, so I couldn't test if it works. Can you tell me which Magisk module you used?
NindoS said:
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work
Click to expand...
Click to collapse
Nice
Updated FAQ and sGSI patch. I forgot to add an important fix in patch, so anyone using this MIUI, reflash the new patch right now :good:
I tried again, followed all the steps as requested. On the first boot, I restarted the phone after approximately 30 seconds. But I still bootloop. I'm using Project Spaget 3.0, but I can't find a topic in the forum. Could you send me your Project Spaget zip file?
My logcat is on attachments
nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work
Working fine but having bug
I have a bug with the WhatsApp application when viewing the stories that contain videos are not played and the app freezes.
I attach my log Cat about the error
I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have
dani_hedz said:
I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have
Click to expand...
Click to collapse
It's sGSI related problem, don't know why it happens
argenmu09 said:
nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work
Click to expand...
Click to collapse
It works for me
Wi-Fi not working
LineageOS 16Lineage 16.0 - For Nexus 10 Manta
This is a continuation of followmsi's builds.
Disclaimer:
I am not responsible for your actions or consequences, directly or indirectly, related to the files and/or advice offered.
It is your choice to proceed.
Known issues:
- HWC (hardware composer) is partly broken. (Invisible icons, wallpaper, some overlays, preview screen in resent...)
- Camera does not work. (Broken HAL1 camera and unsupported HAL2 camera.)
- Encryption does not work. (Will result in a bootloop)
- NFC may not work correctly and may drain the battery. (You can disable it in the setting menu.)
Instructions:
Clean install:
1. Install TWRP (Custom Recovery)
2. Boot into TWRP and Format Data
3. Wipe all
4. Install ROM
- 4a. Install GApps (Optional)
- 4b. Install Magisk (Optional)
5. Reboot to system
Do not install the TWRP app.
Update install:
1. Boot into TWRP
2. Install ROM
3. Reboot to system
Do not install the TWRP app.
Download Links:
Nexus 10 MediaFire - Link
Nexus 10 SourceForge - Link
Nexus 10 GoogleDrive - Link
Other Links:
<ADD LATER>
Build Sources:
Kernel GitHub - Link
Build Manifest GitHub - Link
Credits:
LineageOS
@followmsi
<RESERVE>
Lineage-16.0 October 2020
- October 2020 Google security updates
Changes:
- Kernel Patch to prevent crash in Firefox and other apps. GitHub - Link
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20201011-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20201011-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
Cheers all.
thank you for continuing this rom.
Thank you for continuing this Nexus 10 ROM.
I've tried it, and had trouble changing the background.
Additionally, when I also tried GApps open_gapps-arm-9.0-full-20201015.zip, I had no Icons (only Icon names), but have not found time to determine if this this was related.
C-Base said:
Thank you for continuing this Nexus 10 ROM.
I've tried it, and had trouble changing the background.
Additionally, when I also tried GApps open_gapps-arm-9.0-full-20201015.zip, I had no Icons (only Icon names), but have not found time to determine if this this was related.
Click to expand...
Click to collapse
Sad to say it was and still is an issue.
Some users stated that switching to a different launcher helped.
Nova and Next were the ones mentioned if I remember correctly.
I added the known issues to the OP.
Cheers.
Lineage-16.0 November 2020
- November 2020 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20201107-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20201107-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
Cheers all.
Lineage-16.0 December 2020
- December 2020 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20201215-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20201215-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
Cheers all.
Lineage-16.0 January 2021
- January 2021 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20210123-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20210123-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
Cheers all.
Lineage-16.0 February 2021
- February 2021 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20210206-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20210206-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
lineage-16.0-20210206-UNOFFICIAL-manta.zip.sha256 MediaFire - Download
Cheers all.
Thank you for your work ipdev!!!
EDIT: May I ask why you decided to continue builds of lineage 16 when followmsi has moved on to lineageos 17.1?
@ipdev thank you for offering this version of Lineage with the security updates. I have a strange problem with purchased play apps using open G apps. Anything i have already bought I have to buy again. Is this a limitation of using Open G apps? Is there an alternative/fix? Im new to this whole thing!!
Thanks
Now resolved - i was using Pico!
bo0gietrain said:
Thank you for your work ipdev!!!
EDIT: May I ask why you decided to continue builds of lineage 16 when followmsi has moved on to lineageos 17.1?
Click to expand...
Click to collapse
Sorry for the extreme delay.
Save for a few issues, Lineage 16 runs quite well on manta.
The Lineage Team maintains the security updates.
Does not take that long to sync and build.
Normally takes longer to upload.
Originally, I was not sure if anyone would want l16 updates for manta.
Until the download count is zero or I can not build l16 anymore, I will run an update when Lineage updates the security.
A while back, I bought a second Nexus 10.
Paid a little more than I should have.
My second manta is still stock partition so, l17 will not fit.
Currently I run l16 without gapps on it.
Cheers.
graham_uk said:
@ipdev thank you for offering this version of Lineage with the security updates. I have a strange problem with purchased play apps using open G apps. Anything i have already bought I have to buy again. Is this a limitation of using Open G apps? Is there an alternative/fix? Im new to this whole thing!!
Thanks
Now resolved - i was using Pico!
Click to expand...
Click to collapse
Hi.
This will happen every now and then.
As you noticed, you waited long enough and Google will update PlayStore and straighten out.
It's a Google thing.
Cheers.
Lineage-16.0 March 2021
- March 2021 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20210307-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20210307-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
lineage-16.0-20210307-UNOFFICIAL-manta.zip.sha256 MediaFire - Download
Cheers all.
ipdev said:
Lineage-16.0 March 2021
- March 2021 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20210307-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20210307-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
lineage-16.0-20210307-UNOFFICIAL-manta.zip.sha256 MediaFire - Download
Cheers all.
Click to expand...
Click to collapse
Is it necessary intall also or alone the last two zip files, please?
tinaag said:
Is it necessary intall also or alone the last two zip files, please?
Click to expand...
Click to collapse
The md5sum and sha256sum are just to verify the zip file.
Both md5 and sha256 generate a hash value that is used as a checksum for a file.
md5 is older, sha256 is newer and more secure.
The files are just text files that include the hash value and the file name.
lineage-16.0-20210307-UNOFFICIAL-manta.zip.md5sum
aa8cb40245c9064ea6d4125a4016ef71 lineage-16.0-20210307-UNOFFICIAL-manta.zip
lineage-16.0-20210307-UNOFFICIAL-manta.zip.sha256
b57509450b267b6d217fa2bc01961e3e83cccfc4c82aa3334cc48dd4e77d2087 lineage-16.0-20210307-UNOFFICIAL-manta.zip
Example using sha256sum on linux.
Run sha256sum on the zip file to display the hash value.
Bash:
[[email protected] 20210307]$ sha256sum lineage-16.0-20210307-UNOFFICIAL-manta.zip
b57509450b267b6d217fa2bc01961e3e83cccfc4c82aa3334cc48dd4e77d2087 lineage-16.0-20210307-UNOFFICIAL-manta.zip
[[email protected] 20210307]$
Run sha256sum using a file that contains the hash value and file name.
Bash:
[[email protected] 20210307]$ sha256sum -c lineage-16.0-20210307-UNOFFICIAL-manta.zip.sha256
lineage-16.0-20210307-UNOFFICIAL-manta.zip: OK
[[email protected] 20210307]$
The md5sum and/or sha256sum are not needed to install the rom.
All the rom zips are full builds so, you can install any one as a clean install.
GApps might be needed depending on the apps you use.
Magisk is necessary if you need to pass SafetyNet.
Cheers.
PS.
My manta running lineage-16.0-20210307-UNOFFICIAL-manta only (No Magisk. No GApps.).
Netflix runs fine.
Lineage-16.0 April 2021
- April 2021 Google security updates
Changes:
- LineageOS 16.0 updates. Gerrit Review - Link
Direct Download:
lineage-16.0-20210412-UNOFFICIAL-manta.zip MediaFire - Download
lineage-16.0-20210412-UNOFFICIAL-manta.zip.md5sum MediaFire - Download
lineage-16.0-20210412-UNOFFICIAL-manta.zip.sha256 MediaFire - Download
Cheers all.
Your build is a lot faster than the Android 10 build! However I made the mistake to apply my own wallpaper, so now I got a black screen. The only way to get the default wallpaper back is to reflash?
Eagleman77 said:
Your build is a lot faster than the Android 10 build! However I made the mistake to apply my own wallpaper, so now I got a black screen. The only way to get the default wallpaper back is to reflash?
Click to expand...
Click to collapse
Agreed. On my 32 GB Nexus 10 this ROM is clearly faster than my previous LineageOS 14.1-20180611. Installing was a bit tricky because even Pico OpenGapps didn't fit on /system but resizing partitions solved that (following these instructions https://forum.xda-developers.com/t/nexus-10-gapps-fix-with-pie.4064613/). Now I have the disappearing icons but let's see what Nova Launcher does to that.
ProtonAOSP
Android 11 ROM
ProtonAOSP is a minimal Android fork (custom ROM) focused on UI/UX and performance, with a touch of privacy.
Screenshots
Screenshots of the latest version
Installation
This ROM is currently distributed as factory images, similar to stock. Flash it the same way you would flash stock factory images. Don't forget to wipe all data using "fastboot -w" before booting the ROM.
Firmware is included, so there is no specific requirement for which version of the stock ROM you are coming from.
You can also use the quick & easy web installer, which allows you to install and update the ROM from any computer or phone without using the command line. The installer works entirely within your web browser and completes in as little as 4 minutes, depending on the speed of your internet connection. Consider using the web installer instead of installing manually.
More detailed installation instructions and guides
Features
List of current features, with accompanying screenshots and explanations
Downloads
Downloads and changelogs for all versions
Builds with and without minimal Google services (gapps) included are provided for convenience.
Using the quick and easy web installer is recommended unless you have a specific reason to download and install the ROM manually.
Support
If you have questions or concerns, please read the Frequently Asked Questions before asking. It saves time for everyone involved, especially you, and allows us to provide higher-quality answers for all users.
Website with comprehensive documentation
Join the Telegram group for support and extras
Please consider donating to support development if you found this helpful: recurring donation to keep the project alive in the long term or buy me a coffee
Kernel source code
ROM source code
Wanted to say.....thank you! Used the first version..
Enjoyed tremendously.
A hotfix update has just been released to fix issues with a botched SafetyNet fix that caused most apps using HTTP outside of a browser to break, including Google Translate, SMS/MMS, and many others. I've figured out a new way to fix SafetyNet that doesn't come with those pitfalls, so SafetyNet is still passing out-of-the-box and apps will no longer break. A bug with sensitivity in the Active Edge settings has also been fixed, and missing firmware has been re-added so there is no need to flash the latest stock ROM first.
Re-download v11.2.0 from GitHub for the fixes. I've decided to re-upload it rather than bumping the version because the previous SafetyNet fix was very broken and also caused boot failures if boot.img wasn't replaced.
this is an "Android 11 ROM but you maybe a typo saying ROM OS Version: Android 10 ?
themohvision said:
this is an "Android 11 ROM but you maybe a typo saying ROM OS Version: Android 10 ?
Click to expand...
Click to collapse
It's not a typo, XDA DevDB has no option for Android 11 so I had to put Android 10. I've just edited the DevDB info out of the post so there should be no more confusion.
Do I need to wipe user data too ?
As a rule, if you want Any relevant support for problems after installing. Yes. Especially if you decide on no gapps build. Nothing wrong with trying. I used the gapps version and did a pixel device to device transfer and worked same as factory images.
I just came from Lineage 17.1 and decided to mix things up with Proton. Only been 24 hours so far, but it is working well! Surprisingly easy setup, no force closes.
I wiped userdata and used the w/gapps version.
I definitely had to speed up animations in dev options. The only slow one that bothers me now is the glass blur behind notification panel takes an extra half second to unblur once the panel is closed.
Would love a few status bar tweak options like LOS.
Appreciate the Pixel 2 love.
The only problem I saw here is that my pixel 2 is not able to upload high quality at free unlimited storage anymore while it does on LOS and Factory Imgs
ahm_usa said:
The only problem I saw here is that my pixel 2 is not able to upload high quality at free unlimited storage anymore while it does on LOS and Factory Imgs
Click to expand...
Click to collapse
Same here. Rest is absolutely fine.
Sonoo said:
Same here. Rest is absolutely fine.
Click to expand...
Click to collapse
One more thing you'll find intriguing that you can't use Pixel Launcher in its original shape, and moving photos to trash sucks allowing for each photo. Rest is fine and up to the mark but we should be able to upload Full Resolution photos free as they are giving us time till Feb 2022.
Wow, super cool!
I have two question:
1.) I´m unable to create a backup from the new Rom in TWRP. I get an error "createTarFork() process ended with ERROR: 255". I did format everything and the installed the latest Rom Version (with GApps). So it was an absolute clean install. Is this TWRP Error Rom related ?
FIXED -> deleted /data/per_boot
2.) Can i install TWRP (3.3.0.0) again after i installed this Rom? Because TWRP was gone after flashing this Rom. Did used fastboot boot so far, but an installed version is more handy.
Thanks for your help!
ahm_usa said:
One more thing you'll find intriguing that you can't use Pixel Launcher in its original shape, and moving photos to trash sucks allowing for each photo. Rest is fine and up to the mark but we should be able to upload Full Resolution photos free as they are giving us time till Feb 2022.
Click to expand...
Click to collapse
Just saw your comment re Google photo uploads and had a quick look on my device as hadn't checked that out and full res resolution uploads look to be working for me as I don't use the camera much but have uploaded a couple of pics and the free upload toggle is lit blue as expected. I'm on latest 11.2 build with 07/11 opengapps nano test package if that points to anything?
Sent from my walleye using XDA Labs
BeNeDeLuX said:
Wow, super cool!
I have two question:
1.) I´m unable to create a backup from the new Rom in TWRP. I get an error "createTarFork() process ended with ERROR: 255". I did format everything and the installed the latest Rom Version (with GApps). So it was an absolute clean install. Is this TWRP Error Rom related ?
FIXED -> deleted /data/per_boot
2.) Can i install TWRP (3.3.0.0) again after i installed this Rom? Because TWRP was gone after flashing this Rom. Did used fastboot boot so far, but an installed version is more handy.
Thanks for your help!
Click to expand...
Click to collapse
I have heard that installing TWRP causes bootloops on Android 11, so I wouldn't recommend it. I would never recommend installing TWRP on A/B devices either way because it's prone to breakage.
A/B said:
Just saw your comment re Google photo uploads and had a quick look on my device as hadn't checked that out and full res resolution uploads look to be working for me as I don't use the camera much but have uploaded a couple of pics and the free upload toggle is lit blue as expected. I'm on latest 11.2 build with 07/11 opengapps nano test package if that points to anything?
Sent from my walleye using XDA Labs
Click to expand...
Click to collapse
Try deleting photos from photos app if that shows a pop up
ahm_usa said:
Try deleting photos from photos app if that shows a pop up
Click to expand...
Click to collapse
Just took a shot and uploaded and removed original. Used delete option to delete uploaded pic in Google account and pop up tells me this pic will be removed from my google account, synced devices etc
Sent from my walleye using XDA Labs
ProtonAOSP 11.3.0 is now available with security updates, bug fixes, a privacy dashboard, and many more changes.
Changes:
• Updated to December feature drop and security patch
• Added exclusive wallpapers created by Infinitum
• Fixed lingering location and microphone indicators
• Fixed some apps detecting root
• Fixed blurry/low-resolution screenshots in recents overview
• Tapping privacy indicators will now show active apps
• Added permission usage dashboard in Settings
• Tweaked memory management to hold more apps in the background
• Fixed unexpected disconnects from weak 5 GHz Wi-Fi networks (stock bug)
• Streamlined Settings search hierarchy
• Reduced overnight battery drain caused by idle maintenance
• Added a variety of Google Material and iOS accent colors
• Fixed briefly visible lock screen after fingerprint unlock in most cases
• Added support for microG UnifiedNlp location provider (as system app)
• Added support for call recording (consult local laws before using)
• Added SSH client and server with hardened config
• Added volume panel expansion (LineageOS)
• Fixed overlapping type clock on ambient display (BootleggersROM)
• Added button to clear battery stats in Settings (AOSiP)
• Added command-line tools for developers (some from LineageOS)
• Fixed all known Active Edge bugs (Pixel 2)
• Improved Active Edge integration (Pixel 2)
• Added Live Captions, Now Playing, Adaptive Sound, and screen attention (Pixel 5, 4a 5G)
• Added 5G adaptive connectivity (Pixel 5, 4a 5G)
• Added full support for sub-6 5G networks (Pixel 5, 4a 5G)
• Added full support for all carrier features supported by stock (Pixel 5, 4a 5G)
• Added full eSIM support (Pixel 5, 4a 5G)
• Added support for AptX Bluetooth audio codec (Pixel 5, 4a 5G)
• Added stock offline charging animation and percentage (Pixel 5, 4a 5G)
• Fixed Protected Confirmation (Pixel 5, 4a 5G)
• Fixed Google Camera on non-gapps build (Pixel 5, 4a 5G)
• Reduced touch latency and motion jitter at the cost of Deep Press (Pixel 5, 4a 5G)
• Merged latest December 14 carrier fixes (Pixel 5, 4a 5G)
• Added support for Pixel 4a 5G
Click to expand...
Click to collapse
Download
As the ProtonAOSP project expands to support more devices, bandwidth and maintenance costs are increasing. You can help support the project and keep it alive with a recurring donation, or alternatively buy me a coffee. Everything helps, but a recurring donation is the best way to keep the project alive in the long term.
To update from 11.2.0 to 11.3.0 do i need to install the gapps zip if i use gapps or can i just flash the smaller pack with no gapps if i already have them installed?
• Added full eSIM support (Pixel 5, 4a 5G)
Does this mean we can run any eSIM from now on? On stock rom only project Fi sims were supported if i recall correctly.
I looked around but i cant find anything to read the QR code for eSIM...
smorgar said:
To update from 11.2.0 to 11.3.0 do i need to install the gapps zip if i use gapps or can i just flash the smaller pack with no gapps if i already have them installed?
• Added full eSIM support (Pixel 5, 4a 5G)
Does this mean we can run any eSIM from now on? On stock rom only project Fi sims were supported if i recall correctly.
I looked around but i cant find anything to read the QR code for eSIM...
Click to expand...
Click to collapse
For pixel 2 and 2 xl, it just support project Fi only for eSIM. The dev said, for pixel 5 and 4a 5G, proton have support eSIM.
smorgar said:
To update from 11.2.0 to 11.3.0 do i need to install the gapps zip if i use gapps or can i just flash the smaller pack with no gapps if i already have them installed?
• Added full eSIM support (Pixel 5, 4a 5G)
Does this mean we can run any eSIM from now on? On stock rom only project Fi sims were supported if i recall correctly.
I looked around but i cant find anything to read the QR code for eSIM...
Click to expand...
Click to collapse
You still need to flash gapps.
Pixel 2 eSIM support is the same as stock. I believe the "+" button next to mobile network settings allows adding an eSIM for any carrier, but I am unable to test it.
kdrag0n said:
You still need to flash gapps.
Pixel 2 eSIM support is the same as stock. I believe the "+" button next to mobile network settings allows adding an eSIM for any carrier, but I am unable to test it.
Click to expand...
Click to collapse
I tried the eSIM thing last night and it only wants to download something that it cant download. Contacted my carrier and the supplied me with a QR code to activate the eSIM but there is no option to scan QR. I think it only works with Googles Fi.
This ROM is ONLY for SM-T560NU, NOT SM-T560. I CANNOT make a SM-T560 build as they are different CPU/SoCs.
PLEASE BEFORE YOU decide to try this rom, you MUST read all of post 1, 2, 3 and 4 (about 10 minute read). If you think this is an unreasonable request, then stop reading now and find another rom. Thank you.
I am not responsible for lost data, identity theft, lost money, security vulnerabilities, bricked devices or any other hardware or software malfunctions that comes as a result of flashing this rom.
BACKUP YOUR DATA AND OLD rom BEFORE trying my rom.
If you are NOT an expert in using fastboot, adb, odin, heimdall, twrp, DO NOT use this rom. You must know how to use these tools to revert back to your old rom.
If you are new to flashing custom roms, do NOT attempt this.
If you need your tablet for work and something important, do NOT flash this rom. This rom could result in a bricked device or boot loop or non booting device or you not being able to revert back to your old rom.
What works
1. bluetooth
2. wifi
3. brightness
4. external audio
5. GPS
6. audio through headphone jack
7. audio over bluetooth
What doesn't work
1. Camera. The stock camera app video recording doesn't work. Use Simple Camera 5.3.1 from https://f-droid.org/en/packages/com.simplemobiletools.camera/ . I have no plans to work on camera.
2. selinux is permissive. I have tried to make this build enforcing for weeks, but when I do, the OS doesn't boot and there is no adb logcat output despite making an "eng" build. Without adb logcat output, it's virtually impossible to determine what is wrong and I'm not spending anymore time on it. If having enforcing mode is important to you, use my 18.1 builds.
3. keyboard bug workaround. When prompted to enter something like a Bluetooth pin or text based password, sometimes the keyboard is not shown on the screen or off screen. The workaround is to goto settings, system, languages & input, on-screen keyboard, Android Keyboard (AOSP), appearance & layout, theme and choose "Material - follow system settings".
This keyboard bug is a LineageOS bug as per
https://review.lineageos.org/c/LineageOS/android_packages_inputmethods_LatinIME/+/325438
4. gapps. Some of you require gapps for whatever reason. I use Aurora Store for my purposes and thus have NO KNOWLEDGE of the current state of gapps.
There are various gapps projects (at least 5 in 2022). Each has pros and cons. It's your job to do the research and find a suitable gapps project. I suggest you allocate at least a couple of hours doing your own research. My rom works by itself fine without gapps. DO NOT talk about gapps in this thread. As a courtesy to gapps users, if you want to talk about gapps, I have opened a new thread at
https://forum.xda-developers.com/t/...m-t35x-sm-t550-sm-t560nu-and-sm-p550.4479285/
so you may discuss gapps wrt to the msm8916 platform. I will NOT be participating in that thread as I do NOT use gapps.
Thanks
1. LineageOS team for source code.
2. Kyle Harrison
- looking through the adb logcat and suggesting that my binder code was too old to work with Android 12's keystore2 code
- for the graphics and legacy camera patches to allow msm8916 to work with Android 12
- for his Motorola LineageOS 19.1 device trees so I could use his patches as a template for msm8916
3. @tarkzim
- adding back audio hal 2.0 and legacy camera hal 1.0 into the LineageOS trees
- helping me think through the msm8916 random reboots which was due to the TCP/IP patches
- maintaing and updating his repos so I can study them for learning purposes
4. pre ALPHA testers @RDS5 and @Sigster for willing to test pre ALPHA builds and leaving feedback.
FAQ - I spent hundreds of hours building this rom. It was frustrating process from Nov 2021 to Aug 2022 running into bug after bug. The least you can do is spend a few minutes reading everything before posting.
Q1. Where are the source and kernel source files?
A1. The kernel source files are at
https://github.com/retiredtab/android_kernel_samsung_msm8916
The device tree files are at
https://github.com/retiredtab/android_device_samsung_msm8916-common/tree/lineage-19.1
https://github.com/retiredtab/android_device_samsung_gtelwifiue/tree/lineage-19.1
https://github.com/retiredtab/device_samsung_gte-common/tree/lineage-19.1
The vendor tree files are at
https://github.com/retiredtab/vendor_samsung_gtelwifiue
https://github.com/retiredtab/vendor_samsung_msm8916-common/tree/lineage-19.1
The manifest.xml (or roomservice.xml) and build instructions for 19.1 are at
https://github.com/retiredtab/LineageOS-build-manifests
Q2. Is this ALPHA rom suitable as a daily driver?
A2. It can be depending on your requirements. I can't test every app so you try it yourself to see if it's suitable. I've been using this rom myself since mid March 2022 with no major issues. I suggest you do a clean install, see FAQ 11, and flash this 19.1 ROM BY ITSELF (no gapps, magisk, etc) and see if you like it. If you do like it and want to add gapps then see FAQ 12.
Q3. What if my app, xyz, doesn't work?
A3. If your app doesn't work, then go back to your old rom.
Q4. Your rom is laggy and buggy.
A4. If you find the above, then go back to your old rom. There's only so much software can do on a 2015 budget level tablet. Remember a budget tablet will have the slower SoC/CPU and less DRAM than a top of the line model. Your tablet will also run slower when you use gapps. You can run a lot of software without using gapps. Research fdroid, newpipe, Aurora store etc.
Q5. What TWRP should I use?
A5. You MUST use TWRP 3.5.2_9. Get it from
https://sourceforge.net/projects/retiredtab/files/SM-T560NU/TWRP/
Q6. Why should I use this rom?
A6. If you don't like this rom, then don't use it.
Q7. Will you offer monthly updates with security patches?
A7. I will try to offer monthly security patches, but that all depends on if I continue to have high speed Internet in the future.
Q8. Can you help me? I'm a newbie. Can you provide step by step instructions?
A8. I don't have the time to help newbies, so please do your own research. There are lots of tutorials, videos, etc on how to flash roms. Newbie questions must be posted in the Questions and Answers forum, not here.
Q9. Can I report a bug with respect to the rom?
A9. Yes, but you need to supply the following information. If you don't, I won't look at it.
You must provide an adb logcat of the problem and tell me how to reproduce it. Note I will not be downloading any apps that require money or an userid/password. For example, if you have problems with Netflix, I cannot help you since I don't have a paid subscription. If you use some app that requires an userid/password, I cannot help you as I'm not willing to create another userid/password even if it's free.
To get a logcat, open up a terminal window.
Code:
# clear the logcat first
adb logcat -c
# start logcat trace
adb logcat > problem.txt
# reproduce problem
# wait until problem has occured, then stop trace by hitting ctrl-c
# attach the problem.txt ZIPPED as text files don't seem to get attached properly
Q10. Will you still build 18.1 for this device?
A10. Yes, for rest of 2022, but I will make a decision in January 2023 on how 18.1 and 19.1 will be maintained. If you like to help by building 18.1/19.1, please let me know.
Q11. Do I need to erase everything and format my data?
A11. Yes, you MUST erase all the partitions (system, data, dalvik/art cache, cache) using TWRP and MUST format your data before installing 19.1 when you are coming from stock or an earlier version of LineageOS or from another custom rom. If you get stuck at the boot animation for more than 5 minutes, it's likely because you didn't follow the instructions I just wrote. Dirty flashes from stock, other custom roms or older LineageOS versions are not supported and not likely to work.
Q12. What gapps should I use?
A12. I don't use gapps anymore. I use Aurora Store. As of Nov 6, 2021, I no longer make recommendations on which gapps to use as your mileage may vary.
Let me by crystal clear. YOU NEED TO DO YOUR OWN HOMEWORK selecting between the various gapps offered. There are 5: opengapps, nikgapps, mindthegapps, flamegapps and bitgapps. Each one will have it's own installation instructions. The only recommendation I will offer to use the SMALLEST version of gapps.
Don't be surprised that whatever gapps you use might have problems like "Just a sec", voice not working, updating google play store please wait, etc. These are NOT problems of the OS as the OS will run fine without gapps. These are gapps problems and you must ask in the gapps forum why it doesn't work.
In addition, some of the gapps may not install properly when using TWRP and say "cannot /mnt/system". For those cases, please use the LineageOS recovery.img you can download from
https://sourceforge.net/projects/retiredtab/files/SM-T560NU/LineageOS-recovery/
By flashing the LineageOS recovery.img, it will overwrite the existing TWRP and you will get a different UI.
Q13. I'm having problems with gapps, can you answer why it's not working?
A13. I WILL NOT answer any questions regarding gapps. This thread is about the rom, not gapps. Android does not depend on gapps in order to work.
Questions about gapps, for your courtesy, should be asked at
https://forum.xda-developers.com/t/...m-t35x-sm-t550-sm-t560nu-and-sm-p550.4479285/
Q14. Why isn't my post answered or ignored?
A14. Questions already answered in the FAQ will be completely ignored. Again, I do not use Windows OS or gapps.
Q16. What speed up/optimization tips do you suggest?
A16.
1. Turn off animations. Go into developer settings, scroll down to the drawing section, and set window, transition and animator scale all to "off".
2. If you don't have a google account, don't install gapps. Use Aurora Store to get your apps as you can get all the same apps from the play store using an anonymous login.
3. Dont' run more than 2 apps at the same time. You can probably listen to music in the background and use a web browser at the same time, but don't expect great performance from a 2015 entry level tablet.
4. Use a web browser like Brave that has built in adblock and privacy features.
5. Use newpipe to watch your streaming content. It has built in adblock so you don't have to watch forced ads.
6. Look for apps that are open source, ad free and lightweight.
7. Remove all unused quick setting "bubbles" from the quick pull down menu. I only need and have 6.
Q17. Does this rom support Magisk for root?
A17. I don't use Magisk myself so I don't know and Magisk is always being updated to fool Google's certification process. Others have reported Magisk as working, but I won't answer any questions regarding it.
Q18. Will this rom ever become official?
A18. With 19.1, legacy devices like ours will NEVER be official due to lack of ebpf support. See https://lineageos.org/Changelog-26/
Also, I don't want the responsibilities that come with being an official maintainer.
Q19. What is the difference between this rom and others?
A19. This rom tries to be pure LineageOS with little to no modifications.
Q20. Will there be any major 19.1 code modifications in the future?
A20. I don't anticipate any major modifications. There may be some small bug fixes and minor code cleanup, but all the hard work in getting the rom up and running and fixing all the major bugs have been done completed. This doesn't mean the code is perfect or well organized, but I won't be doing any major changes now that 19.1 is working.
Q21. Why did you fork the device and vendor trees for 19.1?
A21. The msm8916 repos seem geared towards phones and sometimes do not work or cause boot animation loops for tablets so I decided to fork their repos. In other words, what's deemed as msm8916-common code isn't common to all devices.
In addition, since I'm building SM-T350, SM-T357W, SM-T550, SM-P550 and SM-T560NU (all use the same msm8916 code), it seems easier to maintain all of them if I can control my own code repos and not worry if my changes affects the phones or not.
I have completely decommonized and rearranged the 19.1 msm8916-common tree so it's easier for me to maintain and build.
Q22. Can you build a variant of this device? For example, a LTE or S-pen version.
A22. If I don't physically have the device, I cannot and will not build it unless I can boot and test it myself. Even then, there's no guarantee that I can get those variant features working.
Q23. Can I load this rom on a variant devivce like LTE or S-pen version?
A23. The rom is built for the device explicitly listed. If you are an advanced user and understand TWRP, adb, odin, heimdall, you can try loading it on a LTE or S-pen variant by modifying the updater-script, but it may cause a bricked device, bootloops or non functionality of LTE/S-pen. You have been informed and warned!
Q24. What major code changes are in 19.1 vs 18.1.
A24.
- iptables has been removed in favour of ebpf
- keystore v1 has been replaced with keystore v2 which requires that the binder calls have some built-in security
- audio hal 2.0 has been deprecated
- legacy camera hal 1.0 and snap app have deprecated
Q25. I don't like the taskbar, how do I turn it off?
A25. Choose settings, type task into the search bar. Choose enable taskbar and disable taskbar. This will leave the on screen nav bar. If you want to disable that, go to settings, system, gestures, system navigation, gesture navigation.
Q26. Will this run on the SM-T560 or SM-T561?
A26. No, the SM-T560 and SM-T561 use a different CPU/SoC. The SM-T560NU rom will NOT work on SM T560/SM-T561.
Q27. Okay, I understand the consequences and that this is ALPHA rom and willing to take the risks outlined, now where can I find the rom?
A27. You can download it from https://sourceforge.net/projects/retiredtab/files/SM-T560NU/19.1/
NOTE: All builds that I upload have been personally tested on my device to boot and function as described in post #1. Having said that, there's still a chance it won't work on your device due to human error, your configuration, your apps, etc. If it won't boot, always start with a complete wipe of everything and format your data in TWRP. This is known has a clean install. Backup your data before a clean install.
19.1 has been my daily driver since March 2022.
May 7, 2023 release notes
1. May 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2023-05
2. Whatever LineageOS changed since Apr 5 patches. About 7,400 files had to be recompiled.
Apr 12, 2023 release notes
1. Apr 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2023-04
2. Whatever LineageOS changed since Mar 5 patches. About 23,000 files had to be recompiled.
March 19 , 2023 release notes
1. Mar 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2023-03
2. Whatever LineageOS changed since Feb 5 patches. About 24,500 files had to be recompiled.
Feb 12, 2023 release notes
1. Feb 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2023-02
2. Whatever LineageOS changed since Jan 5 patches. About 12,500 files had to be recompiled.
Dec 9, 2022 release notes
1. Dec 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-12
2. Whatever LineageOS changed since Nov 5 patches. About 7,100 files had to be recompiled.
Nov 11, 2022 release notes
1. Nov 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-11
2. Whatever LineageOS changed since Oct 5 patches. About 5,400 files had to be recompiled.
Oct 6, 2022 release notes
1. Oct 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-10
2. Whatever LineageOS changed since Sept 5 patches. About 4,300 files had to be recompiled.
Sept 11, 2022 release notes
1. Sept 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-09
2. Switched to different timekeep repo that works with Android 12 and up.
3. Whatever LineageOS changed since Aug 5 patches. About 4,600 files had to be recompiled.
Aug 10, 2022 release notes
1. Aug 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-08
2. Initial ALPHA release to public.
Reserved.
Works great, thank you for your hard work.
My only problem so far is getting Dropbox to work in Mixplorer which I had no problems with in 18.1, but that could be unrelated and there's a way around it either way.
New build called lineage-19.1-20220911-UNOFFICIAL-gtelwifiue.zip
NOTE: All builds that I upload have been personally tested on my device to boot and function as described in post #1. Having said that, there's still a chance it won't work on your device due to human error, your configuration, your apps, etc. If it won't boot, always start with a complete wipe of everything and format your data in TWRP. This is known has a clean install. Backup your data before a clean install.
19.1 has been my daily driver since March 2022.
Sept 11, 2022 release notes
1. Sept 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-09
2. Switched to different timekeep repo that works with Android 12 and up.
3. Whatever LineageOS changed since Aug 5 patches. About 4,600 files had to be recompiled.
retiredtab said:
This ROM is ONLY for SM-T560NU, NOT SM-T560.
PLEASE BEFORE YOU decide to try this rom, you MUST read all of post 1, 2, 3 and 4 (about 10 minute read). If you think this is an unreasonable request, then stop reading now and find another rom. Thank you.
I am not responsible for lost data, identity theft, lost money, security vulnerabilities, bricked devices or any other hardware or software malfunctions that comes as a result of flashing this rom.
BACKUP YOUR DATA AND OLD rom BEFORE trying my rom.
If you are NOT an expert in using fastboot, adb, odin, heimdall, twrp, DO NOT use this rom. You must know how to use these tools to revert back to your old rom.
If you are new to flashing custom roms, do NOT attempt this.
If you need your tablet for work and something important, do NOT flash this rom. This rom could result in a bricked device or boot loop or non booting device or you not being able to revert back to your old rom.
What works
1. bluetooth
2. wifi
3. brightness
4. external audio
5. GPS
6. audio through headphone jack
7. audio over bluetooth
What doesn't work
1. Camera. The stock camera app video recording doesn't work. Use Simple Camera 5.3.1 from https://f-droid.org/en/packages/com.simplemobiletools.camera/ . I have no plans to work on camera.
2. selinux is permissive. I have tried to make this build enforcing for weeks, but when I do, the OS doesn't boot and there is no adb logcat output despite making an "eng" build. Without adb logcat output, it's virtually impossible to determine what is wrong and I'm not spending anymore time on it. If having enforcing mode is important to you, use my 18.1 builds.
3. keyboard bug workaround. When prompted to enter something like a Bluetooth pin or text based password, sometimes the keyboard is not shown on the screen or off screen. The workaround is to goto settings, system, languages & input, on-screen keyboard, Android Keyboard (AOSP), appearance & layout, theme and choose "Material - follow system settings".
This keyboard bug is a LineageOS bug as per
https://review.lineageos.org/c/LineageOS/android_packages_inputmethods_LatinIME/+/325438
4. gapps. Some of you require gapps for whatever reason. I use Aurora Store for my purposes and thus have NO KNOWLEDGE of the current state of gapps.
There are various gapps projects (at least 5 in 2022). Each has pros and cons. It's your job to do the research and find a suitable gapps project. I suggest you allocate at least a couple of hours doing your own research. My rom works by itself fine without gapps. DO NOT talk about gapps in this thread. As a courtesy to gapps users, if you want to talk about gapps, I have opened a new thread at
https://forum.xda-developers.com/t/...m-t35x-sm-t550-sm-t560nu-and-sm-p550.4479285/
so you may discuss gapps wrt to the msm8916 platform. I will NOT be participating in that thread as I do NOT use gapps.
Thanks
1. LineageOS team for source code.
2. Kyle Harrison
- looking through the adb logcat and suggesting that my binder code was too old to work with Android 12's keystore2 code
- for the graphics and legacy camera patches to allow msm8916 to work with Android 12
- for his Motorola LineageOS 19.1 device trees so I could use his patches as a template for msm8916
3. @tarkzim
- adding back audio hal 2.0 and legacy camera hal 1.0 into the LineageOS trees
- helping me think through the msm8916 random reboots which was due to the TCP/IP patches
- maintaing and updating his repos so I can study them for learning purposes
4. pre ALPHA testers @RDS5 and @Sigster for willing to test pre ALPHA builds and leaving feedback.
Click to expand...
Click to collapse
Hello. I wanted to thank you for this amazing custom ROM here. I flashed it onto my grandma's old Tab E. It works very well!
Thanks again!
New build called lineage-19.1-20221006-UNOFFICIAL-gtelwifiue.zip
NOTE: All builds that I upload have been personally tested on my device to boot and function as described in post #1. Having said that, there's still a chance it won't work on your device due to human error, your configuration, your apps, etc. If it won't boot, always start with a complete wipe of everything and format your data in TWRP. This is known has a clean install. Backup your data before a clean install.
19.1 has been my daily driver since March 2022.
Oct 6, 2022 release notes
1. Oct 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-10
2. Whatever LineageOS changed since Sept 5 patches. About 4,300 files had to be recompiled.
Thank you for this ROM. Can you recommend a good media player for this ROM? I've always used VLC, but VLC has no audio on this ROM (Gallery can play videos with audio just fine). I'd like to have a decent media player. I'm using Aurora like you recommended.
zswielder said:
Thank you for this ROM. Can you recommend a good media player for this ROM? I've always used VLC, but VLC has no audio on this ROM (Gallery can play videos with audio just fine). I'd like to have a decent media player. I'm using Aurora like you recommended.
Click to expand...
Click to collapse
I also build 19.1 T710/T810 and just had this question re VLC and it should work for 19.1 SM-T560NU. See post #20 from @lpedia
https://forum.xda-developers.com/t/...or-sm-t710-oct-10-2022.4480065/#post-87625761
Aurora Store is down for me right now so I can't verify by downloading VLC on 19.1 SM-T560NU.
retiredtab said:
I also build 19.1 T710/T810 and just had this question re VLC and it should work for 19.1 SM-T560NU. See post #20 from @lpedia
https://forum.xda-developers.com/t/...or-sm-t710-oct-10-2022.4480065/#post-87625761
Aurora Store is down for me right now so I can't verify by downloading VLC on 19.1 SM-T560NU.
Click to expand...
Click to collapse
Thank you for the info. The audio output sort of fixed the issue, but the sound cuts out for a second every now and then when playing a video file, so there seems to be an issue still.
zswielder said:
Thank you for the info. The audio output sort of fixed the issue, but the sound cuts out for a second every now and then when playing a video file, so there seems to be an issue still.
Click to expand...
Click to collapse
I don't use the SM-T560NU on a regular basis, but I downloaded VLC from Aurora Store, now that it works again, and played a video for 20 minutes and have no sound cuts at all.
retiredtab said:
I don't use the SM-T560NU on a regular basis, but I downloaded VLC from Aurora Store, now that it works again, and played a video for 20 minutes and have no sound cuts at all.
Click to expand...
Click to collapse
Do you think a resolution of a video file should affect that at all? Before I upgraded to this ROM, I was on Lineage 16, and my tablet couldn't handle 1080p files, so I was only watching 720p. With this ROM, it can play 1080p fine (no issue with the native Gallery player), but when I play 1080p video with VLC, the sound cuts off momentarily here and there. If you have any suggestions, I'd very much appreciate it.
zswielder said:
Do you think a resolution of a video file should affect that at all? Before I upgraded to this ROM, I was on Lineage 16, and my tablet couldn't handle 1080p files, so I was only watching 720p. With this ROM, it can play 1080p fine (no issue with the native Gallery player), but when I play 1080p video with VLC, the sound cuts off momentarily here and there. If you have any suggestions, I'd very much appreciate it.
Click to expand...
Click to collapse
The video I was watching is 1080p (h.264) with audio aac encoding. It actually played 40 minutes after I wrote the initial reply with no audio dropouts.
I suggest you look for a DRM free 1080p video somewhere on the Internet that's public domain and shows this problem so I can download and see if it happens on my tablet.
Also, download an app called MediaInfo (8MB file) by MedaArea.net from Aurora Store. It's ad-free and contains no privacy trackers according to Aurora Store. Use that app to see what audio encoding is being used in your 1080p video.
If there's no obvious answers to VLC dropping audio, I guess you will have to find another player if native Gallery player works fine.
Hello. Is there a chance to make this rom to sm t560?
New build called lineage-19.1-20221111-UNOFFICIAL-gtelwifiue.zip
NOTE: All builds that I upload have been personally tested on my device to boot and function as described in post #1. Having said that, there's still a chance it won't work on your device due to human error, your configuration, your apps, etc. If it won't boot, always start with a complete wipe of everything and format your data in TWRP. This is known has a clean install. Backup your data before a clean install.
Nov 11, 2022 release notes
1. Nov 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-11
2. Whatever LineageOS changed since Oct 5 patches. About 5,400 files had to be recompiled.
New build called lineage-19.1-20221209-UNOFFICIAL-gtelwifiue.zip
NOTE: All builds that I upload have been personally tested on my device to boot and function as described in post #1. Having said that, there's still a chance it won't work on your device due to human error, your configuration, your apps, etc. If it won't boot, always start with a complete wipe of everything and format your data in TWRP. This is known has a clean install. Backup your data before a clean install.
19.1 has been my daily driver since March 2022.
Dec 9, 2022 release notes
1. Dec 5 security patches as per https://review.lineageos.org/q/topic:S_asb_2022-12
2. Whatever LineageOS changed since Nov 5 patches. About 7,100 files had to be recompiled.
Hi, is there any chance to make it also work for SM-T560?
Thanks a lot
cannabis4711 said:
Hi, is there any chance to make it also work for SM-T560?
Thanks a lot
Click to expand...
Click to collapse
SM-T560/SM-T561 doesn't support this rom.
cannabis4711 said:
Hi, is there any chance to make it also work for SM-T560?
Thanks a lot
Click to expand...
Click to collapse
those use a spreadtrum SoC (sc8830) and the source code for their kernels isnt up to date, and the latest port was android 7.1.2 however whoever ported it violated the GPL and didnt release the source code, so the most recent i could find for the SM-T560's kernel is this
device tree, vendor.
the T560NU however has much better community support as it uses the MSM8916 SoC, so thats why this rom supports it.
After a month or so of testing it as a daily driver, I'll post my self built rom. It's been built just following my building guide, I didn't touch the code in any other way (and it's quite noticeable regarding the loudspeaker). It's still got a few bugs (and a few newer ones), but this is the first stable-ish rom I've managed to build since April. Tested on the US version only.
-- DISCLAIMER --
It is highly advised to backup all your phone data, as it will be PERMANENTLY LOST during the upgrade process. Keep in mind that will be needed for future updates as well, as all self built Lineage 19 roms from source needed a hard reset to work properly. This is a highly experimental build, so EVERYTHING IS AT YOUR RISK. I take to responsibility whatsoever.
Also, FOLLOW THE INSTRUCTIONS BELOW as repartitioning the device is NECESSARY for the success of the operation.
---> DOWNLOAD LINK HERE: https://androidfilehost.com/?w=files&flid=335748 <---
-- REQUIREMENTS --
- a computer with adb and fastboot installed. For further information and downloads go to https://developer.android.com/studio/releases/platform-tools
- a minimal comfort using a command line interface. For reference, a complete guide for the moto g7 play can be found here: https://wiki.lineageos.org/devices/channel/install
-- INSTRUCTIONS --
- download the regular Moto g7 partitioning file: https://androidfilehost.com/?fid=14655340768118450531 (thanks SyberHexen ). Remember this is STRICLY NECESSARY.
- connect your Moto g7 play in fastboot mode to a computer with adb and fastboot installed
- from the folder where the file has been downloaded, flash the Moto g7 partitioning file using this command:
fastboot flash boot ocean_gpt.bin
- from the moto g7 play, wipe the memory and the dalvik cache, go into recovery mode, allow sideloading and then sideload the lineage-19.1-20220721-UNOFFICIAL-channel file using the following command:
adb sideload lineage-19.1-20220721-UNOFFICIAL-channel.zip
- OPTIONAL: if you desire to install the Google apps, reboot your phone into Recovery Mode and sideload the respective package (MindTheGapps-12.1.0-arm64-20220416_174313 worked great for me)
- reboot.
-- SOURCE --
- base Lineage OS 19.1: https://github.com/LineageOS/android/tree/lineage-19.1 . This includes the standard sm6150 kernel found here: https://github.com/sm6150-motorola/android_kernel_motorola_sm6150
- SyberHexen's Motorola Channel specific settings: https://github.com/SyberHexen/android_device_motorola_channel/tree/lineage-19.1
- Proprietary blobs extracted through this guide from SyberHexen's April build (Android File Host)
-- KNOWN BUGS --
- the Lineage and the Whatsapp camera don't work well, in particular they don't always shoot photos when the button is pressed. Google Camera does work great tho.
- the backlight doesn't always turn up when calls are received (putting a finger on the fingerprint sensor with the phone ringing will turn it on)
- screen on on notifications does not work
- loudspeaker can be tinny at high volume (may be due to the loudspeaker's poor quality and to the common settings of the mixer_paths.xml file, for more info on the topic: https://forum.xda-developers.com/t/anyone-have-fix-for-low-volume-from-speaker.4054283/ )
Thank you all for this ROM, also there are LineageOS 20 builds (Android 13) on official LineageOS site, i want to ask if there is an way to fix ambient display on LineageOS 19, LineageOS 20 sadly gives me way too low RAM to use it, and SWAP memory is not working on Lineage 20
Edit: many apps do restart extremely often, but it's understandable since it's only an 2 GB RAM device running an ARM64 ROMs
@feder86co @chuy19312 Tell me please, does 4K video recording works on this particular ROM? Or is it possible at least?
kreksoverzum said:
@feder86co @chuy19312 Tell me please, does 4K video recording works on this particular ROM? Or is it possible at least?
Click to expand...
Click to collapse
Well, i didn't test that but sadly, Moto Camera doesn't even have enough permissions to save pictures to SD Card
please help..
I don't got a OS bc i was installing a ROM but it didn't work..
I was trying to install this but it says "No devices found"
newbierooter said:
please help..
I don't got a OS bc i was installing a ROM but it didn't work..
I was trying to install this but it says "No devices found"
Click to expand...
Click to collapse
Try to install Fastboot/ADB Driver
feder86co said:
After a month or so of testing it as a daily driver, I'll post my self built rom. It's been built just following my building guide, I didn't touch the code in any other way (and it's quite noticeable regarding the loudspeaker). It's still got a few bugs (and a few newer ones), but this is the first stable-ish rom I've managed to build since April. Tested on the US version only.
-- DISCLAIMER --
It is highly advised to backup all your phone data, as it will be PERMANENTLY LOST during the upgrade process. Keep in mind that will be needed for future updates as well, as all self built Lineage 19 roms from source needed a hard reset to work properly. This is a highly experimental build, so EVERYTHING IS AT YOUR RISK. I take to responsibility whatsoever.
Also, FOLLOW THE INSTRUCTIONS BELOW as repartitioning the device is NECESSARY for the success of the operation.
---> DOWNLOAD LINK HERE: https://androidfilehost.com/?w=files&flid=335748 <---
-- REQUIREMENTS --
- a computer with adb and fastboot installed. For further information and downloads go to https://developer.android.com/studio/releases/platform-tools
- a minimal comfort using a command line interface. For reference, a complete guide for the moto g7 play can be found here: https://wiki.lineageos.org/devices/channel/install
-- INSTRUCTIONS --
- download the regular Moto g7 partitioning file: https://androidfilehost.com/?fid=14655340768118450531 (thanks SyberHexen ). Remember this is STRICLY NECESSARY.
- connect your Moto g7 play in fastboot mode to a computer with adb and fastboot installed
- from the folder where the file has been downloaded, flash the Moto g7 partitioning file using this command:
fastboot flash boot ocean_gpt.bin
- from the moto g7 play, wipe the memory and the dalvik cache, go into recovery mode, allow sideloading and then sideload the lineage-19.1-20220721-UNOFFICIAL-channel file using the following command:
adb sideload lineage-19.1-20220721-UNOFFICIAL-channel.zip
- OPTIONAL: if you desire to install the Google apps, reboot your phone into Recovery Mode and sideload the respective package (MindTheGapps-12.1.0-arm64-20220416_174313 worked great for me)
- reboot.
-- SOURCE --
- base Lineage OS 19.1: https://github.com/LineageOS/android/tree/lineage-19.1 . This includes the standard sm6150 kernel found here: https://github.com/sm6150-motorola/android_kernel_motorola_sm6150
- SyberHexen's Motorola Channel specific settings: https://github.com/SyberHexen/android_device_motorola_channel/tree/lineage-19.1
- Proprietary blobs extracted through this guide from SyberHexen's April build (Android File Host)
-- KNOWN BUGS --
- the Lineage and the Whatsapp camera don't work well, in particular they don't always shoot photos when the button is pressed. Google Camera does work great tho.
- the backlight doesn't always turn up when calls are received (putting a finger on the fingerprint sensor with the phone ringing will turn it on)
- screen on on notifications does not work
- loudspeaker can be tinny at high volume (may be due to the loudspeaker's poor quality and to the common settings of the mixer_paths.xml file, for more info on the topic: https://forum.xda-developers.com/t/anyone-have-fix-for-low-volume-from-speaker.4054283/ )
Click to expand...
Click to collapse
when will we have new updates?
Androi100 said:
when will we have new updates?
Click to expand...
Click to collapse
Here, in the official site, there is an 2023-05-07 update
LineageOS Downloads
download.lineageos.org
chuy19312 said:
Here, in the official site, there is an 2023-05-07 update
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
more on the site there is only one lineage 20
Androi100 said:
more on the site there is only one lineage 20
Click to expand...
Click to collapse
Well, sadly, LineageOS 19 zips were deleted, even LineageOS 18 zips some time ago, and i never understood why, there are only LineageOS 20 builds today
Androi100 said:
more on the site there is only one lineage 20
Click to expand...
Click to collapse
I just remembered, i have the last official LineageOS 19 for Moto G7 Play, i uploaded it to my Google Drive, here you have an link
lineage-19.1-20221225-nightly-channel-signed.zip
drive.google.com
The only bug it have is that ambient display doesn't work, at least, is the only one i found
Note to official developer of this ROM. if there is an problem to share this old version ROM, please tell me , but please, don't report my link in case there is an problem, i can remove the link but not the ROM since i have it because LineageOS 20 restarts almost all of the apps, multitasking on that rom doesn't exist because when switching on apps, they get restarted, even system ones
Edit: if someone have an build of LineageOS 18 or 18.1, please, give me an link for it