Hi, I have a Joying android 10 head unit 7", I have an Autopmall heads up unit that uses the map app WiiYii, this app is auto connect to heads up unit when opened, you have to have data, location and Bluetooth turned on, the problem I can not find how to turn on the bluetooth on the Joying, no switch, I have installed many BT apps and have found the one that finds the head up unit HYHUD so I know it can be found. I `m hoping that if I can turn on BT It may connect. It will connect to a Samsung A71 android phone and an android 6 tablet, but they can`t keep up with GPS or location, if it can be connect to the Joying it has the the GPS antenna. Thanks for any help I can try. Bill
Same problem with Android 10 Gotech , please help
Related
Ok this might sound a bit dumb to you guys but I'm having a little situation here.
I got tomtom 5.1 and just got the glabalsat bt338 receiver.
I have paired the device with my xda as I have paired a nokia BT headset.
When I switch on the nokia headset and bluetooth, the pda and headset establish a connection automatically.
I would like to do the same for the bt338. As soon as the bluetooth is on, it should establish a connection.
I am not able to do this. I have to click on the bluetooth manager, double click the bt338 for it to establish the connection. Then I have to exit bt manager and turn on tom tom. Still tomtom does not detect the GPS receiver until I click on the GPS device settings and select OTHER BT RECEIVER and then select Blutooth receiver on COM5.
Only then does the GPS show any life.
I would like to know how to get the BT338 to work by just turning on TOMTOM.
It should authenticate and establish the connection on its own, and by the time its up, i should be able to input a destination.
Confusing? No?
easy there mate, give it time....once you have the BT338 paired with your handset, switch everything off.
then 1st switch on your BT338, then switch on your PDA...start up TomTom and leave it for at least 1 minute...it should switch on Bluetooth automatically and connect to the BT338, i had this issue and the 5.1 update solved it...let us know if successful.
Hey Guys, i searched located a few threads but cant find a definite answer...
I got Ford Sync 3 with AA.
My car headunit have factory GPS software and antenna on the car.
Now i have updated my headunit to firmware with AA and CP.
When connecting AA everything works fine, but when i go to Google Maps it always require me to turn my phone GPS to High Accuracy (on) mode.
i was under the impression if my car have built in antenna it will utilize that...
Is it a case where for my car specifically (Ford 2016 Mustang) if built in NAVI is off then there is no power to the GPS antenna? or is it a setting i cant seem to find within AA?
thank you.
I am using a Pioneer headunit connected with the car's built-in GPS antenna, and I frequently use Android Auto. My experience is that AA used the phone's GPS antenna, not the one connected to the headunit (which should have better reception).
AA very probably uses the phone's antenna because the good people at Google expect some headunits to not have a GPS antenna connected (after all no GPS on your headunit is a major selling point for using AA), and they have no way to check that by software.
hello everyone,
I just installed a SEICANE chinese android head unit in my Fiat Ducato from 2017.
I connected the ISO port directly to the 2 connectors from the car, I've first tried to use a power harness including the CanBus decoder, but then the HU is dead. Without harness , the HU works (I guess the car already has a CanBus built in?).
The radio works very well. Also Wifi works well, I can surf on the Internet. But some apps I can not download (using Play Store). For example when I try to download TomTom GO, the HU tells me that there is no Wifi (although there actually IS Wifi!). Other apps are no problem to download (I've "fixed" this problem by installing Sygic i.o. TomTom).
I paired my Samsung XCover3 via Bluetooth and also problems: when I try to make a phone call, sometimes it goes to handsfree (like it should), but sometimes it does not (although the phone display opens on the HU). I did the pairing 10 times , but no difference. I also tried to make an Internet connection using Hotspot or tethering, but that also does not work.
I resetted the HU, but no improvement.
Does somebody knows these problems (and has sollutions to it)?
Regards,
Peter
Hello, I want my car to say a welcome message by tasker Via voice, as soon as my phone connect the vehicle via bluetooth. However, although my phone is connected, tasker sees Bluetooth connections as closed and returns with an error like this. "sorry no data available on paired bt devices."
How do I get Tasker to detect that bluetooth is turned on.
Device: A-media Px5
Mcu: 3.30 Mx
BT: WQ_BC6
Thank you to everyone who has already helped
Sorry. For Google translate problem.
Helo.
I have chinese android navigation mcwauto 8001 for Audi Q5 8R.
My issue is lack of bluetooth connection when I am using Zlink app.
I am able to connect phone with naviagation via bluetooth, but when I establish android auto connection using USB port the bluetooth connection is lost.
Because of that I am not able to make a call using android navigation/zlink. The call is make by phone speaker instead of bluetooth (android navigation).
What is more I tried several times to force bluetooth connection with my phone when I am using wired android auto, but even I am able to connect bluetooth the connection is lost every time I am trying to call.
When I call I have the message "you are not connected with bluetooth"
My zlink app is 3.9.31 - according to my navigation this is the current version of zlink. I found few newest upgrades but I am not able to install it. Few of them stop installing in about 80%, the rest even installed properly not working, the app just stop responding, and the hard reset are required.
Does any of you know solution for my problem?
The red android auto icon (two triangles) on my navigation are showing and disappearing constantly, does anyone of you know what this is mean?
But it's not an MTCD device new member joined for free support.
Requested moderator move to (Android head-units) forum.
Also, what does seller suggest you do when contacted for support