Stuck in recovery mode. Need csc and model number to unlock FRP - Samsung Galaxy Tab S4 Questions & Answers

So I was attempting to free up space on my Tab S4 Wifi, moving apps from device to SD card. After I finished I restarted the device and it was stuck in a bootloop. I attempted to clear cache partition, I also formated to factory reset. Still in the bootloop. I can't charge the device without risking to over heat it and fry the internals. Had no problems with the device prior. Last ditch effort is to flash the rom and install a root to be able to use. Problem is the device is stuck in bootloop or recovery mode. I attempted to install a firmware with Odin, but there is a FRP lock on the device. Before the crash my USB Debugging was on, but all attempts to get the CSC and the full model number, for Frija and Samfirm, has been fruitless. This is my last resort. What am I missing? I really don't want to take it in to a "did you plug it in?" shop. and buying a new one wouldn't be a best option. Thank you in advanced for any and all advice.

Hi chevycamblazer, I had exactly the same problem of yours after attempting to free up space moving apps from device to sd card. After restarting the device I had the following message:
Your phone couldn't start normally. some configuration data may be corrupt. follow the instruction below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also did the same steps you did, cleared the cache and attempting a factory reset.
Nothing worked.
i tried to flash the latest firmware with odin. I downloaded the firmware using Frija. It didn't work, the device is stuck in bootloop.
Can please somebody tell me what I should do?
this is the screen in download mode, frp lock is on, also oem. Is maybe this the cause of the problem? also my device was not in debugging mode activated.

Related

HardBrick Odin Pass but Still Brick

Like my title says I have a i317 Note II on AT&T. It was bricked a while back I tried factory reset which sent it into a boot loop until the battery drained now it is just a brick and wont start but past the Samsung logo.
I ran Odin v3.09 with a Pass but the phone is still doing the same thing. Not sure where to go after this. Do I need to run a new bootloader file? Any help would be great.
These are the files I ran with it:
i317.pit
I317-UCUBMK6.tar.md5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
verapakill said:
Like my title says I have a i317 Note II on AT&T. It was bricked a while back I tried factory reset which sent it into a boot loop until the battery drained now it is just a brick and wont start but past the Samsung logo.
I ran Odin v3.09 with a Pass but the phone is still doing the same thing. Not sure where to go after this. Do I need to run a new bootloader file? Any help would be great.
These are the files I ran with it:
i317.pit
I317-UCUBMK6.tar.md5
View attachment 3062723
Click to expand...
Click to collapse
Is the phone still turning on? If so maybe try booting into recovery first and wiping all data before flashing stock rom again with odin?
I tried that. I have been able to get the phone to boot but as soon as it restarts it goes right back into a bootloop. Try wiping again and restarting with the same results. Stuck in a boot loop on the first Samsung screen.

[Q] Help!! Zenfone stuck on boot screen!! error in recovery

Ok so i checked manually for an update, and downloaded it then tried to install it and it finished the installing screen but then i got stuck on the asus boot screen i waited like 20 mins.
i tried to go into recovery and i selected it, but then a screen came up that said "installing system update" 2 seconds later i got an error screen.
What do i do? thanks
also i am rooted.
does this mean that my phone is bricked? is there anything i can do? i didn't install any custom recovery. someone please help.
There are dozens of threads devoted to this. Please read through the general section and you'll find the answer.
Please see ASUS FAQ's for online assistance. http://www.asus.com/us/Phones/ZenFone_2_ZE551ML/HelpDesk_Knowledge/
How to do hardware reset on your phone? http://www.asus.com/us/support/FAQ/1011956/
How to update firmware on my phone? http://www.asus.com/us/support/FAQ/1009748/
Sincerely,
ASUS_USA
[email protected]
i could not find a thread that applies to the problem that i have. i cannot enter recovery mode. i only have access to fastboot. is there anything i can do?
Update:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was able to get to this screen and i tried factory resetting, but i still cannot boot into my phone. would any of those options work?
List of things i have tried:
- wiped data/factory reset
- wiped cache partition
downloaded sdk and checked for adb, error: device not found
if i don't have adb access, what else can i do? i've read about flashing a custom recovery but there isn't cwm or twrp for zenfone 2 that i read about.
i did have usb debugging enabled but i don't think i ever checked the thing that keeps it on for use with your computer, so at this point i have searched everywhere and have not found a solution that works for me. if anyone could help me with this i would greatly appreciate it.
Follow the steps in this thread.
http://forum.xda-developers.com/showthread.php?t=3127835
By the way the screen you posted is recovery.
Sent from my KFTHWI using Tapatalk

[help] cannot boot into TWRP or ROM after flashing autorec TWRP

I have two G3 D855 phones and what i did was exactly the same as my primary one, and it's not working
For the secondary phone
1) everything was perfect after I changed 32GB chips (ROM, my friend flashed something wrong and hard bricked the device) from repair shop, but I just lost the IMEI, so it's showing 0 currently (i know i can repair but don't bother yet)
2) phone is normal in 6.0MM nor I use LGUP to downgrade to 5.0 LP
3) used "newest root method v03" from there to root the phone
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
4) go to playstore, download AutoRec D855 to install TWRP
5) problem starts here
once i reboot to TWRP using reboot widget, or adb command, i can go into TWRP, but phone stuck in LG logo after another reboot
To boot up the OS again, I have to take out the battery for 10+ min, then insert it again and it will boot up, and i can also go into TWRP from the OS
or if i turn off device, I cannot boot up, not until i take out the battery for 10+ min
I have flashed the phone using KDZ twice and same problem, after install TWRP from AutoRec, I have this bootup problem.
Any help please?
missing download mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when i try to put it into download mode (holding vol up and plug in USB) or using "ADB reboot download" command
that's what i see, i think i messed up my download mode?
when I follow this guide, it said "failed to erase" in first step
http://mybaseisrace.blogspot.hk/2016/02/how-to-fix-lg-g3-download-mode-not.html

[Q][Help] How can I repair my Samsung Galaxy Note 2 N7100 EMMC only with usb cable and without box?

Hello PLZ someone help me. I searched for more than two weeks to solve my problem and did not find any results
I'm sorry in advance that I could not write English well.
I have a Samsung Galaxy Note 2 (N7100) phone with Android 9 custom ROM, which I charged quickly when it finished charging, but it doesn't turn on now.
The mobile stops on the Samsung logo or lineage logo or Battery logo when I charge it and I can only go into recovery mode and download mode that show my product name: GT-N7100
After this incident, I wanted to factory reset it with the custom recovery twrp that I installed on my mobile phone or wipe all the memory, but I got the error unable to mount efs cache system data
"Unable to mount storage".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Even when I wanted to install the official ROM with micro sd memory, twrp displays zero for mobile memory, sd memory and otg.
I also wanted to flash it with Odin with four official files and a pit file, which was unsuccessful and show erorr at the end the message "re-partition operation failed" was announced.
I tried to flash files again with the Miracle software without a box. Some partitions were burned, but due to the inability to burn some partitions, I received a wrong reply error (0).
Also, after flashing the recovery file with the official recovery and new version of twrp, Miracle displayed a successful message, but in practice, there was no change in my custom recovery.
So I'm looking for a way to repair emmc with just a usb cable and no box or any other way to repair my mobile

Bricked TCL Alcatel 1x 5059x

So, I really wanted to get the phone rooted, and I couldn't do it without a recovery, because I can't find the firmware for it no matter what, there is only firmware for 5059d, so when I flashed TWRP for 5059d, it was asking for a password, but I didn't have one. I made one, but TWRP didn't let me mount internal storage. I tried factory reset and it made it even worse, it showed me this image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried factory reset but didn't help, then I tried to flash 5059d stock recovery, it worked, but now it does not even want to boot into system, I have tried Wipe data/Factory reset, didn't help. I am stuck now. I did try to flash stock firmware for 5059d, but I can't do it for some reason, SP flashtool throws me some ERROR : STATUS_BROM_CMD_FAIL /0xC0060005) error. I really don't know what to do now, if someone knows to help me, it would be preety cool . This is not my main phone, but I really want to get it fixed. Screw rooting now.
Where did you get the ROM?
DerivativeOfLog7 said:
Where did you get the ROM?
Click to expand...
Click to collapse
First Google search, phone is completely gone though so not worth investigating
BokeeXD said:
First Google search, phone is completely gone though so not worth investigating
Click to expand...
Click to collapse
Look at this: https://forum.xda-developers.com/t/...rom-a-5059d-to-unbrick.4598953/#post-88676529
May be worth a shot. If I were you I'd first try normally just plugging the usb cable in while the phone is off, and if it doesn't work, take it apart, unplug the battery, and then plug it in

Categories

Resources