Hi I'm new to the site, i had read a lot post about upgrading roms from different companys, i read people describe how good the a2dp quilty is, but the problems comes, i first upgraded the rom to T-Mobile , then i found there are a high pitch nosie, at first, i though it was just my earphone, after i changed it, it still the same, then i upgrade to the QTEK rom, the nosie still comes, the nosie comes as the singer start to sing!!! it makes my so dizzy, i had try to link my BT to my PC, but they sound much different! no nosie plus clearer sound!
the second problem is that when a phone call-in, the ringtone goes via BT rather than built-in speaker???
the third problem is if you set ur BT as both hands free/set and wireless stero, during a connected phone call, if you press any button on the dial pad, all the sound will gone, but the phone is still connected, i found this problem when i using my voice mail?!
also after i update to the non-O2 rom, my phone is no longer accept any MMS, i already config all the setting from O2, is just that i don't have my MMS acount appear on my mail box. i also try the .cab setting file too!
My A2DP BT is i-Tech S35
ROM Version: 1.30.77WWE (QTEK)
Radio Version: 1.09.00 (QTEK)
ExtROM Version: 1.13.188 WWE (O2)
Many Thanks!!!
Was it just me than having this problem???
- I've not the first problem.
- I've the second problem
- I never experienced third problem
:wink:
http://forum.xda-developers.com/viewtopic.php?t=46540
Click on the above link , download the file and run it on your phone, do not alter any of the options, just click next on everything it will fix your MMS problem
thx a ur advice coff... but it still doesn't work, plus i starting to think that the nosie might cause by my s35, due to the campasility.. (sorry can't spell)
Hi MicmiC901,
Yes, it probably is something "locally" with your phone/headset/area/etc, since I also have same experience as asci, meaning;
1. NO, don't have that problem
2. YES, I have same issue (to me this is actually OK, since when headset is connected, I WANT it to only ring in the headset)
3. NO, never experienced this problem
I use the latest Qtek ROM with AKU2 and A2DP, but have never experienced that high-frequent-noise-issue you mention with any other of the A2DP ROMs on my JasJar (TMobile Germany ROM, a custom-ROM from the forums).
so RonnyGydar, which bt headset u using @ the moment? i just try with my friends logitech bt headphone, it get worse than my i.tech, sound get Stuttering , so i think i better change a new bt, would u recommand moto ht-820?
Hi MicmiC901,
Sorry the veeery slow response...but now I have even one more BT Stereo headset...so then you get the "bonus" of even more info in my reply!
I have 3 BT Stereo Headsets, and here is a short summary of experience of them all.
HP BT Stereo Headphones (same HW as the Logitech ones as I understand).
Sound is good, clear, OK bass. Nothing exceptional, but I was very pleased with them. Sound could be a bit higher at the highest volume...if you plan to use then in noisy environments...but not really an issue...since they are quite loud.
Motorola HS820
Soundwise (clarity and bass) very simmilar to the HP ones...can't point my finger on any differences. But they seem actually a little less loud than the HP ones...so with these I struggeled to hear Podcasts when I sat on a bus going through tunnels. The HP headphones are slightly louder, I think.
Bonus of these are the excellent batterylife and miniUSB plug...plus the HP ones do not have a microphone, so the HP ones are only for music. So I would easily chose the Motorola's before the HP headphones.
One minus for me with the Motorola's are that they hurt my ears after a couple of hours of use. ...that at lack of "powerfull" bass, got me to look at the i-Tech BluePRO's...
i-Tech BluePRO
These have very good bass (and they sure look like they should have it too...pretty big earmufflers...with these, you look like you are working at a construction site or something, but the clarity of the sound is actually worse than HP and Motorola...they sound a bit fuzzy.
...but I still use these all the time...mainly for two reasons. One is the excellent bass (I like to listen to techno and trance...and then bass is important, the other is that they isolate outside sounds (due to the enormous padding), so I can have the sound as low as I prefer...and STILL hear all my music without disturbance from other sounds in the environment (like sitting on the bus in a tunnel, or at a noise Gym).
It also seems that there is quite a bit difference in how the different manufacturers implement BT profiles.
My Motorola and i-Tech BluePRO have problems with "Pause/Resume"-button on headset when used with my JasJar (Pause works, but not resume...or opposite...not sure which it was, dont have the headsets with me today)...but the HP ones does not (I tested them a couple of times, and the HP headphones worked all the time)!?
Re-connection after a time without use seems also to vary a bit. The Motorola I can turn off/on the headset, and they reconnect automatically to my JasJar. The i-Tech BluePRO's I must choose re-connect in "Bluetooth settings" on my JasJar every time I want to use them.
The "famous" "lag-issue" everybody experiences I experience with all my headphones in some situations...and it does not seem any better or worse among the headsets. It seems to also be affected by general radio disturbance, since I have a lot of problems with lag at work, but no problems at all at the Gym (which is good for me...since that is the place I am most happy with having my wireless headphones), and some issues at home.
Hope this was of any help!
actually i have the problem micmic is talking about.. it happened when i upgraded my wiz to a newer rom to get the a2dp function. eventually i do not have a bt.stereo -headset yet.. (coming in about 2 weeks) but i have the issues with the sound. it's almost like a bad bitrate or something? ..wierd it is since i remains even if i downgrade my rom. =/
Hi epluribus and MicmiC901,
Is the "stuttering" you both mentioning the same as I call "occational lag"?
IF it is...it you should certainly not have it when you do the following test;
1. Reset your JasJar/Universal (to clean memmory completely)
2. Started listening to music over headset with...
3. The Universal lying on the desk in front of you completely still 50cm from your face
4. You sitting completely still
5. No WiFi on close to you.
...this test is completely overkill...but if it STILL stutters in that "controlled scenario"...well then it must be something different with your Universal or headset HW. Cause I can walk around with my JasJar (also in areas I know there are 5-6 WiFi connections active...like my appartment), and even put the JasJar on the table and walk 5-10 meters away from it...and have no or at least nothing more than an "occational stutter"/"lag".
It seems to be two major factors affecting this "stuttering"/"lag" (from my experiences at least...I have used A2DP a lot with my Universal...couple of hours every day);
1. Universal struggling outputting(RAM/CPU...or both!?)
One help here is to apply the registry "A2DP priority" fix (found it in the forums here).
Another is to close all programs before using it (I usually do not do this...I usually only do it in hindsight when I get the problem).
2. Signal between Universal and headset struggling (obstructions between Universal and headset, WiFi nearby, so forth)
I for example get this problem if I put my Universal in my trouser pocket (I know, I must have big pockets, and walk around, I get stuttering/lag occationally. If I then take it out, and hold it in my hand farily still when I walk...no stuttering. I have found, that when I walk, it is OK to have it in my backpack/rugsack...then for some reason it very rearly stutters...so I usually do that.
But when I walk of the bus at work, and walk into the "campus" of my workplace, which is cramped with radiotransmitters (is norways largest Telecom company)...I get a lot of stuttering, and need to take it out of backpack, and hold it in my hand, at it gets a lot better.
In short: A2DP with the Universal works, but is sensitive to disturbance/obstructions/moving around...and to make it worse, it is also sometimes dependant of the Universal itself struggling with CPU/RAM.
I have BTW had the exact same problems before with Qtek2020 and Qtek9090 (which I got hold of some "A2DP patches", when I had those devices). ...but I really had a LOT more stuttering with those two...so much so, that I never used A2DP with them on a daily basis.
...so it can seem that HTC is getting slightly better on each new device...?
Hope this info can be of some use!
...but it might not...if my assumption at the beginning here is wrong, and your "stuttering"-issue is something completely different than the "lag"-issue I talk about!?
Hi there,
I hope i am posting in the right category, if not, mods pls move it.
I have a HTC p3300 loaded with B&B4.1 ( Thanks tom & pof!) and paired with my first ever bluetooth headset ( SE hbh-ds980). I received numerous complains from the party other end stating they can barely hear me ( voice comes out soft and low). If i move the mic literally close to the mouth,, then it gets better. If I speak directly i.e no bluetooth ( phone builtin mic) they can hear me fine. I made sure both the volume controls ( incall and speaker volume ) are set at max and even played with Mic AGC setting and still no luck.
At first i thought i bought a knock-off ds980. But here's a kicker though, when i paired it with my backup phone ( nokia 6230b) and tried calling them. They can hear me loud and clear ( almost eqvt to w/o bluetooth).
So i am guessing it has to do something my HTC phone now. For the life of me , I cannot find any mic related settings in wm6 besides the mic AGC. So here I am asking this humble community if there's any registry tweaks that can be made to boost the microphone? I would be grateful to any1 who comes up with a solution. I am not even sure what to do now..get rid of the ds980 or not
I have the same problem with Bluetrek X2 HF, I guess this may be problem with some part of Artemis HW, because it is'n ROM dependent. I have tride this HF with HTC original ROM, BB3.7, BB4, BB4.1, Meschles ROMs and now using Fracoons beta2, but this problem stil remains...
you are right, its independent of the ROM.. I believe it has something to do with the bluetooth stack on our artemis.
Anyways, i am in the process of selling mine. Now should I try another DS980 or go for the DS970?
Hello, I've just offered a Mi A2 Lite. At first speakers were working correctly, but now, for some reason, they doesn't work anymore.
The person who has it didn't do anything before that problem. I tried testing sound on others apps (YouTube, Chrome), deactivating/reactivating DND mode, rebooting the phone, searching for updates, called the phone (sound works correctly when coming out from the notch, but I can't hear anything with speakers), and tried hardware test with *#*#6484#*#*.
It's really annoying, as the phone arrived yesterday. Anyone knows a fix?
Thanks
Bump & Update: someone told me to try plugging & unplugging a headset multiple times, and I'm now aware that the phone doesn't detect headsets anymore. (Headsets were detected and worked yesterday, and are detected right now on another Mi phone)
Hi all,
I have MI 10T and recently I bought xiaomi's TWS 2S headphones. I noticed that when screen is locked, audio becomes very bad on Spotify (ie). Same thing happens sometimes even if not in locked screen.
Output is distorted, and generally is a bad experience. On the other hand I've tested the headset with other devices (ipad, mi note 3, Samsung S71) and audio is perfect. So my best guess is that there's something wrong (hopefully) at Bluetooth software.
I've changed Spotify to no battery restrictions, and set it to autostart. Didn't help. I also visit developer settings and tried to change the audio codec from default to something else. There I noticed that's not possible. Whatever change I do, when I exit dev's page it returns back to default values.
Any other had Bluetooth problems?
I'm on 12.0.15 stock global.
teoB_Glar said:
Hi all,
I have MI 10T and recently I bought xiaomi's TWS 2S headphones. I noticed that when screen is locked, audio becomes very bad on Spotify (ie). Same thing happens sometimes even if not in locked screen.
Output is distorted, and generally is a bad experience. On the other hand I've tested the headset with other devices (ipad, mi note 3, Samsung S71) and audio is perfect. So my best guess is that there's something wrong (hopefully) at Bluetooth software.
I've changed Spotify to no battery restrictions, and set it to autostart. Didn't help. I also visit developer settings and tried to change the audio codec from default to something else. There I noticed that's not possible. Whatever change I do, when I exit dev's page it returns back to default values.
Any other had Bluetooth problems?
I'm on 12.0.15 stock global.
Click to expand...
Click to collapse
I also had this issue, changing the sound effects preset from smart to video/music/voice works for me but just for a while, i have to constantly do this everytime i re-open the music app.
Seems like there are very few user experience this since its been more than 6 month and no one have answer for this weird yet annoying issue, sad
Hi all
I and two other people I know using this phone have the same problem. This must be considered as a bug now. Xiaomi support acts like a fool and gives the same answers all the time. I am also afraid this might be a hardware issue. When connected to headphone and playing music, hold the phone 60-70 cm away from you and cover the camera area with your palm, and you will see it dissconnects.
If anyone installed a custom rom to 10t, can they please tell us if this problem exists or not?