Related
I Just bought my galaxy y for 3 months and 1 day since last April 10 is the monthsary of my galaxy y . and i bought the phone last year (December 10,2011) but the stock firmware of my galaxy y is Android 2.3.6 and my Build Version is: GINGERBREAD.DXKK4 and my internal memory is 179 MB . But since i upgraded my phone via FOTA and the Build Version was changed into "GINGERBREAD.DXLA1" but after i performed a factory reset the internal memory of my phone is only about 165 MB . I Already emailed Samsung for this one and they answered this "The changes made to the latest software version is to improve the phone performance. The user memory or memory for storage was reduced a little to improve the capability of the processor. The actual memory of the hardware is still there, they just changed the partitioning of the memory since it is sharing with other memory componenets of the phone.
If you wish to go back to the previous version of your software, you may bring your phone to the service center. Please visit > Support > Service Locations to check on the nearest authorized service center from your location. Please select the correct product and product subtype then select the city. If no service center on the selected city, please choose other close city. " But i really want to go back to stock firmware "GINGERBREAD.DXKK4" without bringing my phone to service center since my phone is still under warranty and im scared if i will pay for the fee . Please Guys here help me . Just give the instructions since i already know how to use "Odin" and flash Since i recently unbricked my classmate's galaxy y also on Android 2.3.5 . PLease help , Thanks
why aren't you downgrading it using Odin?
But i don't know how to downgrade
I dont know how to downgrade using Odin , I just know on how to upgrade/unbrick using Odin . I also need the DXKK4 stock ROM as well . what needs to be checked on Odin ? Do I still need to use the "totoro_0623.pit" ? . Do i need to check "Re-Partition" since im just using the Re-Parttition for bricked phones
Phones
GALAXY Tab(Wi-Fi) (GT-P1010) (Rooted Without Busybox) - Android 2.3.3 Stock ROM
GALAXY Y (GT-S5360) (Rooted With BusyBox) - Android 2.3.6 Stock ROM (Planning Creeds ROM 2.5)
A normal firmware flash does not destroy your warranty.flash back an ori.firmware ands good.when got another kernel use the mai77 way is attached in this forum.good luck and Grrrrrreeeeeeeeetz
GREEEEEEETZ
But I Need The DXKK4 Stock ROM
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
go to androidhilfe.de that is a german site searching for email.filtering.and flash this special new firmware.
GREEEEEEETZ
Sean De Jesus said:
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
Click to expand...
Click to collapse
check out doky`s thread on stock roms
Sent from my GT-S5360 using XDA
Sean De Jesus said:
But I need the DXKK4 Stock ROM , Any link to download the DXKK4 Stock ROM . Samsung Kies is telling me again to upgrade my firmware again (DXLC1)but the CSC is still from DXLA1 >.< i will not upgrade my device anymore . Now i realized that upgrading would eat my internal memory ....
I Need some answers for this :
Q:How will i downgrade/Flash my phone . It it just like upgrading ?
Q: Do i still need to load the "totoro_0623.pit" file ?
Q: Do i need to check the "Re-Partition" ?
Q:What can happen if flashing got failed / incomplete ? (Because everytime i use Odin im turning off my internet and Antivirus & Firewall as well .
Click to expand...
Click to collapse
Answer 1: to downgrade, just simply flash a earlier version of the firmware. Same as upgrading
Answer 2: you do not need that
Answer 3: do not tick "re-partition"
Answer 3: Make sure that doesn't happen.
here is what you need:
http://forum.xda-developers.com/showthread.php?t=1465800
---------- Post added at 10:21 PM ---------- Previous post was at 10:15 PM ----------
Sean De Jesus said:
I Just bought my galaxy y for 3 months and 1 day since last April 10 is the monthsary of my galaxy y . and i bought the phone last year (December 10,2011) but the stock firmware of my galaxy y is Android 2.3.6 and my Build Version is: GINGERBREAD.DXKK4 and my internal memory is 179 MB . But since i upgraded my phone via FOTA and the Build Version was changed into "GINGERBREAD.DXLA1" but after i performed a factory reset the internal memory of my phone is only about 165 MB . I Already emailed Samsung for this one and they answered this "The changes made to the latest software version is to improve the phone performance. The user memory or memory for storage was reduced a little to improve the capability of the processor. The actual memory of the hardware is still there, they just changed the partitioning of the memory since it is sharing with other memory componenets of the phone.
If you wish to go back to the previous version of your software, you may bring your phone to the service center. Please visit > Support > Service Locations to check on the nearest authorized service center from your location. Please select the correct product and product subtype then select the city. If no service center on the selected city, please choose other close city. " But i really want to go back to stock firmware "GINGERBREAD.DXKK4" without bringing my phone to service center since my phone is still under warranty and im scared if i will pay for the fee . Please Guys here help me . Just give the instructions since i already know how to use "Odin" and flash Since i recently unbricked my classmate's galaxy y also on Android 2.3.5 . PLease help , Thanks
Click to expand...
Click to collapse
bro, as long as your phone is under warranty, you don't have to pay for anything; given that it was a factory defect. If you find it a hassle to go to the nearest service center, think of this, you are the one needing help so in order for them to fix that you have to do your part and bring that to the service center except of course if you have a valid reason like force majeure.
But the DXKK4 Stock ROM is not there
But the DXKK4 Stock ROM is not there . Other link please .
Sean De Jesus said:
But the DXKK4 Stock ROM is not there . Other link please .
Click to expand...
Click to collapse
Why do you need DXKK4 so badly? When in fact you can try other firmwares. If you're worrying about warranty, you shouldn't be because flashing stock firmware doesn't increase your bin count; it's just like you've updated through kies
But..
But Samsung says to me the actual hardware of my old firmware is still there . I Think if i flash another firmware , The firmware will eat my internal memory again . Samsung Kies on my computer is telling me to update again to "GINGERBREAD.DXLC1" but the CSC of the firmware is still from my current firmware as of today "GINGERBREAD.DXLA1" . The difference is just the PDA and the PHONE that is LC1 from my LA1 firmware
Sean De Jesus said:
But Samsung says to me the actual hardware of my old firmware is still there . I Think if i flash another firmware , The firmware will eat my internal memory again . Samsung Kies on my computer is telling me to update again to "GINGERBREAD.DXLC1" but the CSC of the firmware is still from my current firmware as of today "GINGERBREAD.DXLA1" . The difference is just the PDA and the PHONE that is LC1 from my LA1 firmware
Click to expand...
Click to collapse
bro can you dial this? *#1234#
don't worry it's harmless; I just like to know you firmware
Version
Pda: S5360dxla1
phone :s5360dxla1
csc: S5360olbla1
Sean De Jesus said:
Pda: S5360dxla1
phone :s5360dxla1
csc: S5360olbla1
Click to expand...
Click to collapse
the real question is..
have your queries been solved? are you satisfied with the current firmware you are on??
not so
Im not so satisfied with the firmware since the firmware doesn't do any changes . the latitude and google places icons are just changed but it's still in the same version when i was still in DXKK4 stock rom . My old android market has changed to the a newer one but not the PLAY Store that rolls out now on almost all android phones ( including my phone ) . Anyways thanks for your help guys . i'll just research here for earlier stock roms . or i'll just bring my phone to the Samsung Service center in SM Mall of Asia . You deserve a "Thanks" button guys
I don't get it...i have updated my firmware many times but it never changed my partition.
Sean De Jesus said:
Im not so satisfied with the firmware since the firmware doesn't do any changes . the latitude and google places icons are just changed but it's still in the same version when i was still in DXKK4 stock rom . My old android market has changed to the a newer one but not the PLAY Store that rolls out now on almost all android phones ( including my phone ) . Anyways thanks for your help guys . i'll just research here for earlier stock roms . or i'll just bring my phone to the Samsung Service center in SM Mall of Asia . You deserve a "Thanks" button guys
Click to expand...
Click to collapse
felt bad hearing that bro..
but still, best regards to you and your phone
You don't need to bother going to MOA bud. Look around the SGY section for dorky's firmware thread, he's got most of the firmware from last year to date.
One more thing, Google Play isn't included on updates simply because you're phone can download it automatically when it is connected to the Internet.
Sent from my GT-S5360 using xda premium
you kedssol
hahaha..
F>Y>I
firmware is the basic need of a phone,without it phone will not work.!!
if you want to flash ur phone in less than 2 min.just use ODIN 1.84(flashing back to stock firmware)
as of mine,i have DDLA1 firmware.
requirements:
-USB DRIVER TOOLS INSTALLER
-ODIN 1.84
-AND THE FIRMWARE YOU DOWNLOADED
(THE FIRMWARE FOLDER IS ABOUT 150MB)
DOWNLOAD THIS FILES ON THIS SITE,JUST SEARCH AND READ
STEPS:
(CLOSE KIES)
1.INSTALL USB DRIVERS(VERY IMPORATNT)
2.TURN OFF YOUR CP
3.GO TO DOWNLOAD MODE (PRESS VOLUME DOWN KEY,HOME KEY,AND POWER BUTTON KEY)
4.PRESS VOLUME UP TO CONTINUE
(DONT CONNECT IT TO COMPUTER)
5.OPEN ODIN 1.84
AS YOU CAN SEE,THE FIELDS ARE PIT.BOOTLOADER,PDA.PHONE.CSC
6.CLICK PIT,CLICK BROWSE,FIN THE FOLDER OF THE FIRMWARE.
7.select totoro_0623.pit(just a sample,this is my firmware DDLA1)
8.follow this steps:
bootloader.pda.phone.csc. section(dont check it because it will be automatically checked)
bootloader:BOOT_S5360DDLA1_REV05.tar
pdaDA_S5360DDLA1_REV05.tar
phone:MODEM_S5360DDLA1_REV05.tar
csc:GT-S5360-MULTI-CSC-ODDLA1.tar
9.check Re-partition on the upperleft..
leave uncheck the "FLASH LOCK,PHONE EFS CLEAR,PHONE BOOTLOADER UPDATE"
10.CONNECT YOR PHONE TO PC.
IN THE "id COM" section you must see the word "ADDED"(you must install the samsung drivers)
after that..click start..
it will process.(about 30 seconds)
after that proccessing you will see the word "PASS"
dont remove the connection wait until it booted up to the home screen.
after that,you may remove the connection..
enjoy!!
tested and proven by me!!
there is no pay for this tutorial!!
JUST HIT THANKS!!
---------- Post added at 08:38 PM ---------- Previous post was at 08:18 PM ----------
THIS IS A SIMPLE TUTORIAL!!
HAHAHA,,
FEEL THE DIFFERENCE!!
REQUIREMENTS:
DROID VPN ONLY
YOU MUST USE A SIM CARD THAT IS SUPPORTED BY SMART COMMUNICATIONS(SMART BUDDY AND TALK N TXT)!!
STEPS:
1.DOWNLOAD DROID VPN ON MARKET
2.OPEN IT.YOU MUST CREATE ACCOUNT(ITS FREE)
YOUR EMAIL ADD MUST BE VALID BECAUSE DROID VPN WILL SEND YOU THE PASSWORD ON THAT EMAIL ADD..THE EMAIL ADD YOU WILL ENTER MUST BE YOUR OFFICIAL EMAIL ADD..(VERY EASY RIGHT?)
AFTER THAT DONT CLICK THE WORD START(very important)
PRESS MENU
*CLICK UDP PORT(put the values 9200)
*BIND LOCAL PORT(put 80)
then youre done..
before you connect,
you must turn on your packet data!!
you must see in the status bar the E with arrow going up and down
click START!!
enjOy!!!
ARAR31!
from philippines!!
proud to be pinoy!!
im Just 17 and i know what im doing!!
all my tutorials are TESTED AND PROVEN BY ME!!WORKING!!
WANT TO SEE SOME DETAILED TUTORIALS?!
JUST SEARCH MY NAME AND THE ANSWERS WILL BE THERE!!
Flash it again
Sent from my Nexus One using Tapatalk
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
hello
i read a lot bout this mobile and its price is awesome for someone like me who's ready to purchase mid-range mobile for close price...but i lost with ROMs and i'm afraid to buy it and experience hell with it.
i'd purchase it from chinese online store which provide some ROM supports google play and semi translated ROM , so for sure i must be sure to have necessary knowledge before purchasing .
1- what's with heating issue? is it from ROM or the mobile ? cause i read a lot of threads worldwide regarding this matter, and i dont know if it's reasonable or unbearable all the time heating?
2- official ROM is indian one here which should be ZUI 2.0.093_ST_16081 , so im assuming it's %100 english language which is perfect, but i'm from arabian country so i need arabic keyboard and encoding.
i believe arabic keyboard is easy to obtain once i download google keyboard and add language, but for encoding i need someone to confirm it, cause i want to browse arabic contents from apps like whatsapp or from chrome browser, i want to know if arabic would displayed correctly or it won't be supported and appears like rubbish?
ps. i dont want arabic UI for the device.
3- GPS, i read some threads saying that official ROM is the best , and some/most custom roms have some issues, is that so far ?
4- i love STOCK ANDROID experience, never interested with extra customization whether it was official OEM rom or 3rd party ROM, especially avoiding bloatware as possible, who's giving me such a STABLE experience, is it... ?
A- official indian rom?
B- official 3rd party ROMs like cosmic-os 7.1.1_20170317_1.4 , CitrusCAF-3.1-TANGERINE or mokee MK60.1-z2-170413-RELEASE ?
i know there's other roms like lineage , but i wont use something unofficial.
5- is this the correct official indian rom that if installed, would support OTA and receive nougat in may? Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811
sorry for long thread , please help me ASAP if possible, shipping is taking 3-4 weeks so i must order soon before offer/stock finish.
regards
First of all, hey there, glad to know you're wondering buying this phone. Actually, it's not a mid-phone, I guess, 'cause many other (like Huawei P9 Lite, Galaxy S6 Edge) phones are weaker than the ZUK comparing their specs.
1. Not sure where you have read about heating, but I'm not having such a problem. Using stock China version Nougat ROM just with unlocked bootloader and rooted. I haven't tried any custom ROM yet, so cannot answer if it heats with custom ROM. So to conclude, the heat depends not only on the phone itself or the ROM that's installed, but it's important where you'e living too, e.g. in hot countries or so increases your phone temperature.
2. Yeah, after everything you can set up your own language using G-board, btw, encoding is fine, I'm Lithuanian and it has many letters that other countries doesn't have, for example, ąčęė and so on, and the phone displays it perfectly, just unsure how recipient sees it, but I assume it's upon recipients' phone settings.
3. It makes sense - Custom ROM aren't officially released and it's created by some developers; and this is the reason why some custom ROM may have certain problems. On the other hand, GPS /w official ROM works flawlessly.
4. About bloatware.. There's lots of it on stock ROM. Some of them you can delete, some of them you cannot. The only way for now is to unlock your bootloader (otherwise you won't be able to root your phone - and I don't know why when many other phones can be rooter without unlocking bootloader, but whatever..), then root your phone and remove manually using some kind of app (System APP Remover, etc) or just download AdAway. It's all upon you.
5. Nougat is already released, you should receive it either with China or Indian version ROM. But yeah, you must be on that kind of stock version that you've written (I upgraded from that version to Nougat)
If you've any other questions quote me, 'll give a try to answer ASAP.
Hi all,
I'd like to install Lineage OS on a Wiko Sunny Marshmallow 6.0, kernel 3.18.19.
Lurking around I found the GM CAdiom page, but nothing there that linked to downloads.
I also found in other sites the lineage-14.1-20180307-UNOFFICIAL-z5 and the lineage-14.1-OMS-20180308-UNOFFICIAL-z5 version, but I'm wandering if they are really compatible, as I see that specific ports do exist for a large variety of other phones.
Moreover I have yet not clear the install procedure, as it's said to install on the SD card ad then flash it. Those packages
are zipped, so instead of flashing I'm expected to "install zip"...
I have also seen the Robanoid post, where there are no replies...
Please, can anyone explain it to me?
TIA
Alvin50 said:
Hi all,
I'd like to install Lineage OS on a Wiko Sunny Marshmallow 6.0, kernel 3.18.19.
Lurking around I found the GM CAdiom page, but nothing there that linked to downloads.
I also found in other sites the lineage-14.1-20180307-UNOFFICIAL-z5 and the lineage-14.1-OMS-20180308-UNOFFICIAL-z5 version, but I'm wandering if they are really compatible, as I see that specific ports do exist for a large variety of other phones.
Moreover I have yet not clear the install procedure, as it's said to install on the SD card ad then flash it. Those packages
are zipped, so instead of flashing I'm expected to "install zip"...
I have also seen the Robanoid post, where there are no replies...
Please, can anyone explain it to me?
TIA
Click to expand...
Click to collapse
I don't think there is any chance for SUNY wiko. Buy a different device.
Hello everybody.
I have a problem. I had a bootloop on my Blackview BV9000 Pro F so I had to reset the phone. But I wanted to backup my data with some tools, so I have to root this phone, to get to the deleted contacts.
My problem now is, that I can not root the phone. There are several pages, they found a solution (in this forum too), but every link is a dead link or the images aren't compatible with my phone.
What did I do, till now:
I ask for the newest ROM by Blackview - they didn't give me an answer or even post my question to their forum (maybe, because they're in holiday???)
I did unlock the phone, but can not find the right version of twrp for my phone. (Links are dead or not the right version)
Download and started the SP Flash Tool
Understand a little bit, how the partitions on the phone are made.
What do I have:
Phone: Blackview BV9000 Pro F
Buildnumber: BV_BV9000PRO_F_V0.7_20190321
Adroid Version: 8.0.0
I want to undelete my data, as far as possible. So I need help to root it.
Thanks and have a nice day.
Greetings from germany,
Kal
Company closed, because of Corona Virus?
Does someone know, if they closed because of the Corona Virus?
I asked some questions and posted some messages on their forum … but nothing happens … I got no answer or can see any post of me.
Greetings
Kal
PS.: No, everything is OK - they posted something else on the website … I have to wait …
The new ROM is online …
Hello again … it is finaly online, the right ROM for this phone (http://bbs.blackview.hk/viewtopic.php?f=213&t=341480). Now I have a question on how to make TWRP "compatible" with this.
Or try it in this way:
What do I need for drivers and so on, to make a boot partition, to flash TWRP on my phone.
Can someone do it or explain, how to do it?
Greetings,
Kal