Develop Bugs

never hide softkeys

Hi,
i've tried to do a few searches but can't find anything about SHOWING the soft keys all the time.
See the thing is, this phone is for the mother-in-law and she's 71 so it needs to be as simple as possible. She wants to play games like temple run but doesn't understand the concept of swipe the top to get the home button to show up so I'd like to have the bottom bar always visible, even in immersive mode.
Any ideas please?
Cheers

I should probably include that it's stock 14.6.A.0.368 (this probably needs updating, but I'm looking for how to do that at the moment and confusing myself lol) and is rooted.

Xposed module 'App Settings' - go to the app you want, full-screen>prevent. I think you have to do it for each one. You probably can force it across the board with build prop, but I think the other way is best.

I can cope with that... Is there an easy guide for my firmware version to install xposed? I don't want to brick it again lol
Cheers

s0m3dud3 said:
I can cope with that... Is there an easy guide for my firmware version to install xposed? I don't want to brick it again lol
Cheers
Click to expand...
Click to collapse
Flash this in recovery - http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592 Then install this apk - http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440 Then open Xposed app and go to 'download' and search for 'app settings'. Note that the first boot after flashing the zip will be long and finish with 'optimizing apps' dialog, which will take several minutes. Make sure your battery level is good.
Always a good idea to backup first.
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
s0m3dud3 said:
I can cope with that... Is there an easy guide for my firmware version to install xposed? I don't want to brick it again lol
Cheers
Click to expand...
Click to collapse
Oh yeah, and any time you install a new module in Xposed, it won't be active until you reboot.

Absolutely smashing, thanks. I've flashed the zip and now I'm waiting for it to load up, then I'll install the apk and find the module.
Cheers

Unfortunately that didn't work Things like Temple Run still go full screen and the navigation bar disappears.

s0m3dud3 said:
Unfortunately that didn't work Things like Temple Run still go full screen and the navigation bar disappears.
Click to expand...
Click to collapse
Strange... Is the module working in general? Did you check the box in 'modules' screen in Xposed? I tested it on several apps and it was good...

I don't think so... It's ticked and I've rebooted and all that. The Adblocker module I found is working fine. Strange.
Perhaps I'm missing something. Any suggestions please? lol!! It's winding me up big time :/

s0m3dud3 said:
I don't think so... It's ticked and I've rebooted and all that. The Adblocker module I found is working fine. Strange.
Perhaps I'm missing something. Any suggestions please? lol!! It's winding me up big time :/
Click to expand...
Click to collapse
Did you find the right options OK in the 'app settings' app, (full screen>always)?

Yeah, the options are there but no go.
Apologies for the delay. I've been away for the weekend.

s0m3dud3 said:
Yeah, the options are there but no go.
Apologies for the delay. I've been away for the weekend.
Click to expand...
Click to collapse
This will do it for $1.50 - https://play.google.com/store/apps/...lay&pcampaignid=APPU_1_0GClVp_MDoTW-QHV-ZyYBA

Are you sure? Reading the description that seems to do the opposite to what I want?
I want the navigation bar to be visible even in full screen mode. The girlfriend's mum can't grasp the concept of swipe to show the navigation and she keeps forgetting when we tell her, so by having it always visible we remove that obstacle

s0m3dud3 said:
Are you sure? Reading the description that seems to do the opposite to what I want?
I want the navigation bar to be visible even in full screen mode. The girlfriend's mum can't grasp the concept of swipe to show the navigation and she keeps forgetting when we tell her, so by having it always visible we remove that obstacle
Click to expand...
Click to collapse
There's a 'blacklist' function which you can apply to chosen apps. I can't say if it will work on your specific game or not. The Xoosed module I mentioned works great for me with Camera, but I guess it didn't work for your game. I think with play store you can return a purchase within 15 minutes or something...

Don't know how I missed that. I'll give it a bash, Many thanks!

That didn't work either unfortunately

s0m3dud3 said:
That didn't work either unfortunately
Click to expand...
Click to collapse
Well, after some reading, it seems clear that it is coded into the programming, and you'd have to rewrite the ROM to entirely disable it. From app to app, you probably could decompile and mod the apk so it doesn't call on the function. I did read that Gravity Box from Xposed has an immersive mode toggle, but I can't test it, since GB doesn't work on CM ROM. Check that out.

Thanks for your help so far. I tried GB but it didn't work either. Bloody annoying.
Perhaps another approach would be double tap the power switch to return home? Do you know if something like this exists please?
Thanks again for all the input and suggestions so far.

s0m3dud3 said:
That didn't work either unfortunately
Click to expand...
Click to collapse
Hey I just discovered UDN (ultimate dynamic navbar). Install it, go to ssettings>general>special modes. Check 'toggle mode' and uncheck 'hide on outside touch'. The navbar will never go away. The only problem is that it sits Right there over anything else, blocking whatever you might want to touch down there, so maybe not a total fix. How eve, there's also more configurations you can mess with that might at least be an improvement.
https://www.google.com/url?sa=t&sou...ggbMAA&usg=AFQjCNEq8r_Pm6GfpwU6u7O8w_Uh5UwLUg

I think I tried that as well, but like you say, it gets in the way. It got in the way and I didn't look any more into it. I'll give it a go and look more at it when I get home from work. Cheers.

Control your AOD (LED alternative - Automate flow)

Hi all,
I am also missing a notification LED for incoming messages et al.
Well, the following might be of interest for some of you. Let me explain: I took a closer look at Automate and the flows provided by the user community there. Unfortunately all the flows for controlling the AOD there do support Samsung and LG devices only. By chance I stumbled across the correct name for the Huawei-specific variable that needs to be triggered. So, I took a working flow for LG, simply replaced the variable's name and voila, a working flow, without the need for root or something.
And it works like this: each time an incomming message (or something similar) triggers a notification, the stock AOD gets switched on, showing you the usual clock and notification icon. As soon as you are disabling the notification (by reading the message etc. pp.) the AOD gets switched off again. This works quite well, saves some battery (compared to having AOD constantly on), and you can clearly see when a new message arrives. I also didn't need to put Automate in the battery white list, it simply works as intended.
The necessary steps to get this working are as follows:
Install Automate from play store
Install the Automate extensions "network permissions", "settings permissions" and "superuser permissions" (the latter does not need root for granting the permissions indeed)
Enable "superuser permissions" via adb:
Code:
adb shell pm grant com.llamalab.automate.ext.superuser android.permission.WRITE_SECURE_SETTINGS
Switch off the AOD functionality in your devices settings
Download the (zipped) flow I have attached to this post and install it
Start the flow and grant the permissions you are asked for
If you use flow v01 switch off the logging of that flow, there are tons of data generated while the device is plugged in via USB, flow v02 works fine with loggin enabled
Enable "Automate" in Settings -> Accessibility features -> Accessibility -> Downloaded Services
I have been running this solution since late November. For me it runs smoothly, stable and battery friendly. Maybe it's also helpful for some of you. Just let me know when you have questions.
Disclaimer: I have published the flow on 25th November at android-hilfe.de and in the Automate community only recently.
Cheers.
Update:
@RoteDose has been so kind and had a closer look at the old flow and completely reworked the power charging check, so there's no log flooding anymore. So he created a v02, that I have attached here now. Thanks a bunch for your support, mate!
To do: research for AOD icons to be refreshed after disabling the notification
- Found a list of Huawei specific settings here.
- And you can list the settings by
Code:
adb shell settings list system|global|secure

Hi. I tried this for the Mate 20 X and got the following error when trying to enable superuser permissions using Terminal Emulator:
adb: inaccessible or not found
I am not rooted - any idea what the issue might be?

praveen6585 said:
Hi. I tried this for the Mate 20 X and got the following error when trying to enable superuser permissions using Terminal Emulator:
adb: inaccessible or not found
I am not rooted - any idea what the issue might be?
Click to expand...
Click to collapse
Hi. I would recommend to use adb from your PC. Here's a XDA how-to: https://www.xda-developers.com/install-adb-windows-macos-linux :good:

beggar23 said:
Hi. I would recommend to use adb from your PC. Here's a XDA how-to: https://www.xda-developers.com/install-adb-windows-macos-linux :good:
Click to expand...
Click to collapse
Thanks.. I'll try this and revert

Hi can you please give more details on no. 5, 6 and 7?

galaxy16 said:
Hi can you please give more details on no. 5, 6 and 7?
Click to expand...
Click to collapse
You can download to your phone the file "Huawei AOD switch.zip" I attached and unpack it to a path of your choice. In the Automate app you can import the unpacked "*.flo" file through the dots menu on the top right. You are then able to give permissions, switch logging and start/stop the flow.
Hope this helps. Just let me know. Cheers.

Is there anything else to do after the upload? Unfortunately, it doesn't work for me. I get a notification and nothing happens. But when I turn on the screen and lock the AOD shows. But that's not how it's supposed to work.

beginner user said:
Is there anything else to do after the upload? Unfortunately, it doesn't work for me. I get a notification and nothing happens. But when I turn on the screen and lock the AOD shows. But that's not how it's supposed to work.
Click to expand...
Click to collapse
Have you switched off AOD before starting the flow?

beggar23 said:
Have you switched off AOD before starting the flow?
Click to expand...
Click to collapse
Yes, it's still off.

beginner user said:
Unfortunately, it doesn't work for me. I get a notification and nothing happens. But when I turn on the screen and lock the AOD shows. But that's not how it's supposed to work.
Click to expand...
Click to collapse
Alright. Let's check some things. First question: How do you know, that you got a notification, when the screen or AOD doesn't light up?

beggar23 said:
Alright. Let's check some things. First question: How do you know, that you got a notification, when the screen or AOD doesn't light up?
Click to expand...
Click to collapse
I was writing a message from my wife... Generally speaking, now it's working. I don't know what was wrong before. That's great

beginner user said:
I was writing a message from my wife... Generally speaking, now it's working. I don't know what was wrong before. That's great
Click to expand...
Click to collapse
Glad to hear that! :good:

Its not working o my P30, Emui 10. I followed instruction everything allowed, AOD stock deactivated, but nothing......Automate works fine, flow is active, but...… What could be wrong......

First of all, thank you for this solution.
But I have a little problem. I don't know why, but for me doesn't work :/
AOD switched off -> started the flow (granted all the permissions) -> lock the screen -> i got a message (the phone vibrated), but the AOD doesn't switch on -> unlock the phone, just to the home screen (doesn't read the message) and lock again -> and now the AOD is switched on

The problem is solved.
Just need to enable this:
Settings -> Accessibility features -> Accessibility -> scroll down and enable Automate

razer91 said:
The problem is solved.
Just need to enable this:
Settings -> Accessibility features -> Accessibility -> scroll down and enable Automate
Click to expand...
Click to collapse
Thank you for that. I will add it to the OP.

Alexxxx1 said:
Its not working o my P30, Emui 10. I followed instruction everything allowed, AOD stock deactivated, but nothing......Automate works fine, flow is active, but...… What could be wrong......
Click to expand...
Click to collapse
Let's stop, switch on logging and restart the flow. Try enabling Automate in "Downloaded Services" as @razer91 described below your post. Maybe the log info will then help you finding out what goes wrong. Just let me know.

beggar23 said:
Let's stop, switch on logging and restart the flow. Try enabling Automate in "Downloaded Services" as @razer91 described below your post. Maybe the log info will then help you finding out what goes wrong. Just let me know.
Click to expand...
Click to collapse
Thank You very much! It works, great!
I hope that Automata will not affect on battery life.

Alexxxx1 said:
Thank You very much! It works, great!
I hope that Automata will not affect on battery life.
Click to expand...
Click to collapse
I don't think so. At least here it's all fine. Automate is not even in the battery saver white list, and going to sleep perfectly. Also, I detected no CPU wakelocks.

Yes, I checked too. The consumption of battery by Automata is minor.
Excellent work man [emoji106][emoji108]
Sent from my ELE-L29 using Tapatalk

Question Did you know about this double tap feature?

If you enable QuickTap, in the settings app, you can tap the back of your phone to either open an app of your choice or preform a selected command. I am like mind blown right now.
This thread is a PSA for others like me.

mkhcb said:
If you enable QuickTap, in the settings app, you can tap the back of your phone to either open an app of your choice or preform a selected command. I am like mind blown right now.
This thread is a PSA for others like me.
Click to expand...
Click to collapse
I did not know, but very cool find!!

I use it to start and stop music.

I use it for screenshots.

Use it for notifications since day one.

MrBelter said:
I use it for screenshots.
Click to expand...
Click to collapse
me too

Discovered it recently too, know that you can map it to any action/task you want by simply associating it with "Tasker secondary" as app so you can do whatever you want with it

galaxys said:
I did not know, but very cool find!!
Click to expand...
Click to collapse
It is cool.. when it works. lol. There have been multiple reports, myself included, that observes at times it just craps out. Then you have to go into settings, back out and it works again. Frustrating but I do believe there is a fix coming soon if it's not here already in the mid Nov update. Nonetheless, I saw this back in early November right before I got the device and then watched it again once I could follow along. It's a long YouTube video but the double tap is in there along with a bunch of other cool tweaks.
Do This First With Your Google Pixel 6
Looking for the first 10 things to do with your Pixel 6 or Pixel 6 Pro, this video is a must-watch.
www.droid-life.com

Themes / Apps / Mods Solution for non-functioning proximity sensor (for GSIs)

11/05/2022: UPDATED the instructions and the rules.
NOTICE: This method is no longer relevant for the U2-baseband firmware and Android 13-based GSIs, they should work out of the box.
After a couple of weeks of the real-world use of SM-A325 with LineageOS GSI installed, I've found that the phone has no real proximity sensor and that's a real problem. The so called "virtual" proximity sensor mentioned by Samsung is obviously just an emulation done by reading the tilt sensor (vertical position) and the touchscreen (touch anywhere in the upper half).
Almost all of the GSIs use the generic Call app, so just a slight accidental touch with your ear or finger and you can have a whole bunch of functions activated. There is a solution though:
Install the "Automation" app (open-source) by Jens Schröder
Go to the "Rules" tab and press "Add Rule"
Give the new rule some name (e.g. "Turn screen off during call")
Press "Add trigger", "Phone call", "State" = "started", "Call direction" = "any". Press "Save".
Press "Add action", "Turn screen on or off", "Deactivate"
"Save Rule"
If the rule is marked with the yellow dot go to the "Overview" tab, start the service and give the needed permissions
Also press "Control center", "Settings" and make sure that "Start at system boot" is checked.
And another, mode advanced version (if that's too complicated you can just import the attached settings file):
Go to the "Rules" tab and press "Add Rule"
Give the new rule some name (e.g. "Turn screen off during call")
Press "Add trigger", "Phone call", "State" = "started", "Call direction" = "any". Press "Save".
Press "Add trigger", "Device orientation"
Position the phone vertically (Pitch = 0±5) and press "Apply"
Enter tolerances: 180, 70, 180
"Must apply" checked
Press "Save"
Press "Add trigger", "Screen state", "on"
Press "Add action", "Turn screen on or off", "Deactivate"
"Save Rule"
I recommend setting "Signal frequency" in "Device orientation settings" in the settings to 500 ms. This way there will be much lesser chance of lag when phone is lifted up to the ear, while the battery consumption by the Automation app will still remain negligible.
That's it. Now when you receive a call the screen will be turned off. You can turn it on during the call by pressing the side button, the call will not be interruped. When using the advanced version of the rules the side button works only when the device is held horizontally, unfortunately there is no way to improve this but I think that is a very minor issue (or just use the simple version instead).

Updated rules, working with Automation v1.7.6.

This causes an issue in video calling on whatsapp where the phone turns the screen off again and again.

Captain_cookie_200 said:
This causes an issue in video calling on whatsapp where the phone turns the screen off again and again.
Click to expand...
Click to collapse
Try the rule that I am using now. It's much simpler and much more reliable. If it does not work for you then probably this solution is just incompatible with WhatsApp. BTW, I am not using it and don't recommend to anyone as it's the privacy-violating app.

uluruman said:
Try the rule that I am using now. It's much simpler and much more reliable. If it does not work for you then probably this solution is just incompatible with WhatsApp. BTW, I am not using it and don't recommend to anyone as it's the privacy-violating app.
Click to expand...
Click to collapse
oh. btw how do i import these files??? and that small brown message sooo your living without screen turning off on its own? and privacy invading.... WAIT WAS IT TRACKING MY STUFF ALL ALONG?

Captain_cookie_200 said:
oh. btw how do i import these files??? and that small brown message sooo your living without screen turning off on its own? and privacy invading.... WAIT WAS IT TRACKING MY STUFF ALL ALONG?
Click to expand...
Click to collapse
Any free commercial app is doing this. That's why it's free.

uluruman said:
Any free commercial app is doing this. That's why it's free.
Click to expand...
Click to collapse
but aint this open source. its on the f droid store. and over there, there are only open source apps.

and how do i import it btw. the xml file. thanksss

To import the rules put them in some folder, start Automation, press Control center, Import configuration and choose that folder.

Captain_cookie_200 said:
but aint this open source. its on the f droid store. and over there, there are only open source apps.
Click to expand...
Click to collapse
I was talking about WhatsApp, of course.

uluruman said:
I was talking about WhatsApp, of course.
Click to expand...
Click to collapse
oh yes... whatsapp... i am forced because of my school groups and my whole family using it.. otherwise i would ditch it. anyways thanks for your time

It seems that this problem is no longer present at least with the latest Android 13 stock firmware (A325FXXU2CVK3) or even slightly older used together with LineageOS 20.0 or even 19.0. Using the Android 13 firmware also cures another long-standing issue - the non-functional MTP file transfer. Analyzing the kernel source reveals that Samsung obviously abandoned their own f_mtp_samsung driver in favor of the standard f_mtp.

uluruman said:
It seems that this problem is no longer present at least with the latest Android 13 stock firmware (A325FXXU2CVK3) or even slightly older used together with LineageOS 20.0 or even 19.0. Using the Android 13 firmware also cures another long-standing issue - the non-functional MTP file transfer. Analyzing the kernel source reveals that Samsung obviously abandoned their own f_mtp_samsung driver in favor of the standard f_mtp.
Click to expand...
Click to collapse
i am aware. unfortunately gsi's lag alot on android 13 and i was getting almost 1 fps on hill climb racing. yep. i dont know why... thats why im sticking to android 11 firmware.

Captain_cookie_200 said:
i am aware. unfortunately gsi's lag alot on android 13 and i was getting almost 1 fps on hill climb racing. yep. i dont know why... thats why im sticking to android 11 firmware.
Click to expand...
Click to collapse
Hmm. I'm currently using Lineage 20.0 (td version) installed upon the unaltered A325FXXU2CVK3 firmware and I didn't notice any difference in performance.

uluruman said:
Hmm. I'm currently using Lineage 20.0 (td version) installed upon the unaltered A325FXXU2CVK3 firmware and I didn't notice any difference in performance.
Click to expand...
Click to collapse
i see. there was a huge performance drop for me

@uluruman
Hi! First of all sorry for my mechanic English hehehe.
I just broke my proximity sensor cause water... , Now im trying this method but I have a question.
Exist some way to put audio in the calls speaker ( the topside speaker used in calls)? For example, I want to listen some Whatsapp audio in private.
I want to put the smartphone on my ear and then automation change the speaker, besides turn off the screen.
I didn't saw any option, just the script option that I don't know how to use it and the "boardcast" option that i dont know how to use it neither.
Thanks in advance.

ADDJ69 said:
@uluruman
Hi! First of all sorry for my mechanic English hehehe.
I just broke my proximity sensor cause water... , Now im trying this method but I have a question.
Exist some way to put audio in the calls speaker ( the topside speaker used in calls)? For example, I want to listen some Whatsapp audio in private.
I want to put the smartphone on my ear and then automation change the speaker, besides turn off the screen.
I didn't saw any option, just the script option that I don't know how to use it and the "boardcast" option that i dont know how to use it neither.
Thanks in advance.
Click to expand...
Click to collapse
I am sure that Automation can't do that, changing whatever speaker is used for sound output is ruled entirely by the particular phone app.

ADDJ69 said:
@uluruman
Hi! First of all sorry for my mechanic English hehehe.
I just broke my proximity sensor cause water... , Now im trying this method but I have a question.
Exist some way to put audio in the calls speaker ( the topside speaker used in calls)? For example, I want to listen some Whatsapp audio in private.
I want to put the smartphone on my ear and then automation change the speaker, besides turn off the screen.
I didn't saw any option, just the script option that I don't know how to use it and the "boardcast" option that i dont know how to use it neither.
Thanks in advance.
Click to expand...
Click to collapse
there was a app i think i saw on playstore. it wont automate it but u can switch entire audio output to ear piece. then u can revert it back lager manually

Question OnePlus 9 Pro LE2123 Android 12.1 C64 Problems.

OnePlus 9 Pro LE2123 Android 12.1 C64
Friends, help me.
For over a year, after switching to Adroid 12, only problems. I already wrote about it on the OnePlus forum, but as a rule there are only mocks that I can't use my phone to reset, clear the cache, etc. It doesn't help.
On the phone not working:
1. The photo has no latitude and longitude. There is only the name of the street (and the wrong one, the
neighboring one).
There is no Google Minimap as before.
2. The Task Manager does not close all open applications. There is always one left. And this is extremely
stressful.
3. In a private safe, the photos do not rotate horizontally.
4. Step counter counts steps. There are no kilometers under the step counter.
5. When touched, the phone does not show the current time. You have to tap 2x hard for it to display the time.
6. The notification sound of SMS, washing machine, dryer, coffee machine is the same.
This is pathetic and abnormal!
I tried by all means to assign the sounds in A12. I have not found a way.
Is there any way to fix this?
I don't want to go back in development and go back to Android 11.

Downgrade Is really simple

davyleggend said:
Downgrade Is really simple
Click to expand...
Click to collapse
The downgrade is very simple. But Android protection will be old

Go for a custom ROM, AOSP these days is very stable. u can even get the android 13 rom already from StagOS or Xtended (if u want more customizations, as the stagos team didn't fill in the horns yet) which r more stable than the OOS 12.

Alex_H_H said:
OnePlus 9 Pro LE2123 Android 12.1 C64
Friends, help me.
For over a year, after switching to Adroid 12, only problems. I already wrote about it on the OnePlus forum, but as a rule there are only mocks that I can't use my phone to reset, clear the cache, etc. It doesn't help.
On the phone not working:
1. The photo has no latitude and longitude. There is only the name of the street (and the wrong one, the neighboring one).
There is no Google Minimap as before.
2. The Task Manager does not close all open applications. There is always one left. And this is extremely stressful.
3. In a private safe, the photos do not rotate horizontally.
Is there any way to fix this?
I don't want to go back in development and go back to Android 11.
Click to expand...
Click to collapse
I check the photo problem and it's the gallery don't show the map but if u check on Google photo the location will be there

davyleggend said:
I check the photo problem and it's the gallery don't show the map but if u check on Google photo the location will be there
Click to expand...
Click to collapse
Thank you davyleggend, this is already a solution.

Alex_H_H said:
Thank you davyleggend, this is already a solution.
Click to expand...
Click to collapse
For the task manager problem if u do cancel all at the home screen at least for me it close all the apps. If u do swipe up for task manager when u are in an app this one not get closed. If u see a little padlocks in the top left corner near the apps in task manager u need to unlock for close it with the clear all button.
For the last problem idk.

davyleggend said:
"If u see a little padlocks in the top left corner near the apps in task manager u need to unlock for close it with the clear all button.
For the last problem idk".
Click to expand...
Click to collapse
Thanks davyleggend for trying to help. I don't have any padlocks in the top left corner.

Hi, is your phone stock or has it been modded in any way?

AndyC76 said:
Hi, is your phone stock or has it been modded in any way?
Click to expand...
Click to collapse
No, the phone has not been modified in any way. All the time OTA update.

Alex_H_H said:
OnePlus 9 Pro LE2123 Android 12.1 C64
Friends, help me.
For over a year, after switching to Adroid 12, only problems. I already wrote about it on the OnePlus forum, but as a rule there are only mocks that I can't use my phone to reset, clear the cache, etc. It doesn't help.
On the phone not working:
1. The photo has no latitude and longitude. There is only the name of the street (and the wrong one, the
neighboring one).
There is no Google Minimap as before.
2. The Task Manager does not close all open applications. There is always one left. And this is extremely
stressful.
3. In a private safe, the photos do not rotate horizontally.
4. Step counter counts steps. There are no kilometers under the step counter.
Is there any way to fix this?
I don't want to go back in development and go back to Android 11.
Click to expand...
Click to collapse
Would you consider using OnePlus warranty to repair/replace your phone?

Wondering which country you're in? I'm completely stock too LE2123 A12 and am on C62. I haven't received the C64 update.

AndyC76 said:
Wondering which country you're in? I'm completely stock too LE2123 A12 and am on C62. I haven't received the C64 update.
Click to expand...
Click to collapse
Recently, I was thinking about putting my phone in for warranty repair. Problems with the proper operation of the application began with changing A11 to A12. I went very far after these problems until the first version of A11 that is to: OnePlus9ProOxygen_22.E.08_OTA_0080_all_2105011323 The phone was updated OTA up to version A12 C: 44. That's when the problems started. I did this cycle 2x. Always after C: 44 the phone lost these 5 functions. So it's not C: 64's fault. C: 64 suggested Oxygen Udater. I installed hoping that all bugs would eventually disappear. Unfortunately not. Everything worked fine when I returned to A11, except for the old Android security.

Alex_H_H said:
Thanks davyleggend for trying to help. I don't have any padlocks in the top left corner.
Click to expand...
Click to collapse
Take a look for locked apps in task manager in settings...

TheGhost1951 said:
Take a look for locked apps in task manager in settings...
Click to expand...
Click to collapse
TheGhost1951, I don't have any apps blocked.

Alex_H_H said:
Recently, I was thinking about putting my phone in for warranty repair. Problems with the proper operation of the application began with changing A11 to A12. I went very far after these problems until the first version of A11 that is to: OnePlus9ProOxygen_22.E.08_OTA_0080_all_2105011323 The phone was updated OTA up to version A12 C: 44. That's when the problems started. I did this cycle 2x. Always after C: 44 the phone lost these 5 functions. So it's not C: 64's fault. C: 64 suggested Oxygen Udater. I installed hoping that all bugs would eventually disappear. Unfortunately not. Everything worked fine when I returned to A11, except for the old Android security.
Click to expand...
Click to collapse
It's good that you're fully stock, I don't know how OnePlus would feel about updating your phone via oxygen updater.
Would you consider putting your phone in for warranty, before you do find the truth about if OnePlus would accept your phone with C64.

It may also be worth checking your phone functions using engineering mode
100+ Secret Dialer Codes for OnePlus Phones
There's actually more to the dialer screen on your OnePlus than meets the eye. Besides its obvious purpose of calling people, there's a vast array of secret codes that you can input to troubleshoot your device, in addition to revealing important information, making anonymous phone calls, and so...
oneplus.gadgethacks.com

AndyC76 said:
It may also be worth checking your phone functions using engineering mode
100+ Secret Dialer Codes for OnePlus Phones
There's actually more to the dialer screen on your OnePlus than meets the eye. Besides its obvious purpose of calling people, there's a vast array of secret codes that you can input to troubleshoot your device, in addition to revealing important information, making anonymous phone calls, and so...
oneplus.gadgethacks.com
Click to expand...
Click to collapse
Engineering mode does not start.

So this indicates a deeper issue!
Alex_H_H said:
Engineering mode does not start.
Click to expand...
Click to collapse
This is indicates a deeper issue, I am out of options of where to signpost you. Do some research to see OnePlus are ok with users using the OnePlus updater. Then when you have proof you can contact support.

AndyC76 said:
So this indicates a deeper issue!
This is indicates a deeper issue, I am out of options of where to signpost you. Do some research to see OnePlus are ok with users using the OnePlus updater. Then when you have proof you can contact support.
Click to expand...
Click to collapse
Very thanks AndyC76!!!
I did a downgrade to the factory version.
Via OTA I came to C.
However, all 6 issues persisted.
There is still a bad taste in using the OP 9 Pro.