Develop Bugs

[Q] Samsung Apps Problem

Hello guys,
This is my problem: When I open Samsung Apps at my phone, it gives to loading screen and after that it crashes, it just goes back to the home screen.
I think this is because I updated Samung Apps at a 3G network, but the connection was lost, so it didn't finish the update...
I just dit a factory reset, but it still crashes...
And when I open Kies, it says there is an update for Samsung Apps. But when I click on `update` it says that the latest version is already installed.
Is there a way to reset samsung apps? To remove and re install it?
Much thanks, Thijmen.

Im having same problem. I recently updated my phone's firmware to Bada 2.0. Straight away i tried to go to Samsung apps, but it shouted it needed to be updates. Well, update it is... My phone anyway jammed during the installation of update. Well, i rebooted it, but afterwards samsung apps doesn't open up on my mobile. It just opens the Samsung apps splash screen and goes back to menu or desktop, where ever i try to open it up.
Things i've tried to resolve this problem:
1. Factory reset, did nothing
2. Hard reset, didn't help
3. Tried to remove folder Samsung Apps from mobile with TK file explorer and stune, didn't work out. Not sure if it was right directory tho. Was something like AppEx\SamsungApps
Is there a way to re-install Samsung apps app?
Any help will be appreciated

You must flash the ShpApp.app of your firmware with multiloader. Write *#1234# to know your firmware version, then download the firmware and use multiloader to flash lite the Shpapp only.

Thanks Aurex for your response. It's very informative.
ok, so im going to do this thing.... I am downloading the firmware, but im not fully sure which one i should grab...
PDA Bada CSC Country/Carrier
S8500XXLD2 2.0 S8500OXBLC1 Sweden
S8500XXLD2 2.0 S8500OXBLC1 Nordic countries
S8500XXLD2 2.0 S8500OXBLC1 Sweden
There's 3 firmwares with exact same sw/csc details. None of those say it's suitable for Finnish version though. Can i still use those for this purpose?
Is there some guide to flash this thing only or do i have to fiqure it out myself?
And does this small flashing lose my personal data?

You can use what you want of this 3 firmware, no problem Open multiloader and don't select full firmware and bootfiles and select only SHPAPP. Take your ShpApp and click on Port Search and Download. No data lose.
But...have you ever flash before?

To be honest, i haven't never even seen a multiloader I've always flashed my firmware the legal ways (kies). But it can't be that hard, can it?
Does it matter what version of multiloader i use?

Here Multiloader 5.67
First of all you must go in download mode, so, press at the same time:
1. Volume Down Button
2. End Call Button
3. Lock Button
This is the download mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect your wave on pc with usb.
Then open Multiloader and select LSI and click on SHPAPP. Select your ShpApp and then click on Port Search and Download:

Ok, now i got firmware and multiloader 5.65. Only thing i need to do on the app is insert ShpApp.app to it's place?
EDIT: you answered me faster than i could post... So im trying to follow your instructions, but i port search ain't working. It just goes grey for couple seconds and comes back, nothing happens. Can't press download button.

Beezip said:
EDIT: you answered me faster than i could post... So im trying to follow your instructions, but i port search ain't working. It just goes grey for couple seconds and comes back, nothing happens. Can't press download button.
Click to expand...
Click to collapse
Ok, so: open Samsung Kies and go to "Tools" (I think ) and "errors in troubleshooting connections" (or something similar). You need drivers.

Well, i managed to handle it with another computer. Percentages started running, will see what happens...
---------- Post added at 03:07 PM ---------- Previous post was at 02:58 PM ----------
Damn dude, it worked. Thanks so much!

Beezip said:
Damn dude, it worked. Thanks so much!
Click to expand...
Click to collapse
I'm happy!

Moto g5 plus id bad key

After trying to return to the original rom the device does not turn on, it always stays on that screen restarting. I've tried several methods and nothing. Can someone help me?
Your device has been unlocked and can't be trusted.
To learn more, visit: motorola.com/unlockbootloader
"ID: Bad Key"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

wagnerwf said:
After trying to return to the original rom the device does not turn on, it always stays on that screen restarting. I've tried several methods and nothing. Can someone help me?
Your device has been unlocked and can't be trusted.
To learn more, visit: motorola.com/unlockbootloader
"ID: Bad Key"
Click to expand...
Click to collapse
Flash Stock Rom And Reloack Bootloader
How to install Stock Rom :- http://ceesty.com/wgKNj2
how to relock bootloader :- http://ceesty.com/wgKMau
How to Remove warning Logo :- https://forum.xda-developers.com/moto-g5s/how-to/remove-unlocked-bootloader-message-moto-t3699273

problem solved, thank you very much.

wagnerwf said:
problem solved, thank you very much.
Click to expand...
Click to collapse
welcome

Hello, y'all. I don't know that I'll get a reply any time soon, as this thread is over a year old, but I am having the same "ID: bad key" problem on my Moto G5S Plus (XT1806) and I have no idea what to do, being that I have not ever even unlocked the bootloader on a phone, as I am having this problem with a phone I bought from eBay that had this issue when I received it.
The full message that displays on my phone is this: "Your device has been unlocked and can't be trusted. - To learn more, visit: motorola.com/unlockbootloader - ID: bad key - Your device will boot in 5 seconds."
For the record, I'm not really concerned with this message being displayed after I restart the phone, as the message goes away after about 5 seconds and the phone starts up properly and is able to be used (*for the most part, with two issues, which I will describe below this paragraph*), it's that the phone will not see any Android updates and is still stuck on these outdated settings: Android version: 7.1.1 - Current version: NPSS26.116-61-8 - Security patch level: April 1, 2018. And I have tried to search for updates with my T-Mobile SIM card in the phone, and also when connected to my home WiFi, but it will not see a new update available.
* The two issues that I referred to earlier have to do with actually making calls on the phone, with outgoing calls taking like 20-30 seconds to actually start dialing and incoming calls not even ringing through to my phone and sending callers straight to voicemail (the phone shows no notification of someone having tried to call me). Text messaging works properly, and I am able to connect to a strong LTE signal with my T-Mobile SIM card in the phone and I can use apps and websites without any issues. However, outgoing calls take much longer to dial out than they should take, and incoming calls will not work at all.
So, I am hoping that flashing a different ROM on to the phone will fix these calling issues and also allow the phone to update to a more recent Android version. However, as I mentioned, I have not ever even unlocked a bootloader, much less, actually flashed a ROM on a phone, so I have no idea what I'm doing when it comes to things this. Also, for the record, I have tried multiple different APN settings on this phone, I have used my T-Mobile SIM card in another phone without any calling issues, and I have done multiple Factory Resets, but nothing has fixed the calling issues or allowed the phone to see any Android updates.
By the way, if flashing a different ROM might be worth trying on this device, being that I would be a first timer doing something like this, how difficult would this be? And about how long should the process likely take?
If anyone has any helpful advice, information or suggestions that they could offer me that might help to fix this issue with my Moto G5S Plus, I would appreciate any and all help that I could get!

If anyone sees this thread and is willing to offer a reply that might help me try to fix this issue with my Moto G5S Plus, I would really appreciate some help with this!

AzAssassin said:
If anyone sees this thread and is willing to offer a reply that might help me try to fix this issue with my Moto G5S Plus, I would really appreciate some help with this!
Click to expand...
Click to collapse
This message means the boot loader is unlocked. Honestly not a huge deal. If you do not plan on using TWRP or Root at all, search the forums on how to relock your boot loader. Otherwise if you wish to use a different recovery or root looks up the logofix which is easy to do. It will have the moto screen, but will say say bad key in small white letters. More thank likely the previous owner had unlocked the boot loader and then flashed it to factory stock before giving it back. That doesn't relock the boot loader so it gives that warning.

Mi 9 SE bricked after successful MIUI 11 Update

Hello everybody!
I have a problem with my Xiaomi Mi 9 SE. This is what happened:
Few days ago I updated to MIUI 11. Everything seemed to run smoothly.
2 days ago I noticed a huge battery drain during the day. I finished my day with my battery @ 10/1% with my usual daily use.
Yesterday I was using my phone normally while it was charging (watching a video on Youtube). The phone became unresponsive to everything: the touchscreen was not working, the buttons on the right were not working.
I decided to "hard-reboot" my phone. I pressed the on/off button for a few seconds.
The screen turned off.
From this point on, my phone was completely bricked. It does not turn on in any way possible: I tried also pressing the on/off button + volume up or down but nothing. Nothing happens even connecting it again to the power cord.
I tried connecting my phone to the PC via USB and this is what my PC recognized:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But my phone still remains bricked/with its screen black.
Has anyone else experienced this problem? Do you have any suggestions on how to fix this or at least recover my data in some way?
I suspect some bug related to battery mgmt in the MIUI 11 and I personally do not suggest you to update to it right now.
Thank you very much in advance!

You're on edl mode. I've been there. Unfortunately, Xiaomi doesn't allow us to recover our phones on edl mode, which is a shame. So, there are two options:
1 - Send it to the seller and try a fix/replacement.
2 - Pay someone with edl authorization to unbrick your phone.
If you want, I'll give you the contact of the person who did that for me. But I had unlocked the bootloader and flashed several ROMS. I bricked the phone trying to restore a full backup. Your case is different and, for what you described, you may be experiencing hardware problems, so I would go for option one.

elpaablo said:
You're on edl mode. I've been there. Unfortunately, Xiaomi doesn't allow us to recover our phones on edl mode, which is a shame. So, there are two options:
1 - Send it to the seller and try a fix/replacement.
2 - Pay someone with edl authorization to unbrick your phone.
If you want, I'll give you the contact of the person who did that for me. But I had unlocked the bootloader and flashed several ROMS. I bricked the phone trying to restore a full backup. Your case is different and, for what you described, you may be experiencing hardware problems, so I would go for option one.
Click to expand...
Click to collapse
Thank you very much for your reply! I really feel disappointed because I never messed up with my phone. I always used official releases. Since I bought it in Italy and now I'm far away from my country, I would go for option 2. Do you know if it is possible at least to recover my photos? Honestly that's the most important thing for me right now and unfortunately I forgot to enable the backup (my bad!).
We can speak in private if you prefer, send me a message with the details of the person that helped you.
Thanks!

Digiaro2 said:
Thank you very much for your reply! I really feel disappointed because I never messed up with my phone. I always used official releases. Since I bought it in Italy and now I'm far away from my country, I would go for option 2. Do you know if it is possible at least to recover my photos? Honestly that's the most important thing for me right now and unfortunately I forgot to enable the backup (my bad!).
We can speak in private if you prefer, send me a message with the details of the person that helped you.
Thanks!
Click to expand...
Click to collapse
Just to update everyone on the status: my phone is still bricked. I contacted the guy suggested by elpaablo but he just suggests to re-flash my phone while I want to recover my data first. I will leave my phone in the closet for 1/2 weeks and then try again to turn it on because I read on other threads that this worked for other people.
I will update this thread later on. I want to highlight again that I did not do anything weird with my Mi 9 SE: no twrp, no custom rom, no weird flashing, nothing. I just updated successfully my phone to the global stable using the official update menu in the settings.

Use your warranty. Your phone should be replaced. As for your photos, didn't you use some kind of backup, like google photos?

elpaablo said:
Use your warranty. Your phone should be replaced. As for your photos, didn't you use some kind of backup, like google photos?
Click to expand...
Click to collapse
Yeah I already contacted my seller and I'm going to ask for repair/replacement. Unfortunately I was not using a backup solution (my bad!).

Samsung Galaxy Watch bricked? - ODIN MODE - Secure JTAG Disabled !!!

Hello
I'm new in this forum and I'm not advanced user in this kind of things at all so please, treat me like a non-geek user.
I want to tell you my story.
I bought my Samsung Galaxy Watch SM-R810 few months ago and I've been trying to install my Samsung Pay a lot of times. I've been reading a lot about this and I suppose that my device is from another country that is not allow to use it (?).
So Reading a lot in this forum (and more) I decided to change the region to another that allows me to use my damnit NFC to pay my things.
I've been trying it by the easiest way using adb commands wireless like in the post bellow:
https://forum.xda-developers.com/sm...nging-region-samsung-gear-sport-r600-t3771324
But everytime I tried it fails and I deduce that my current version is too higher and mine is locked to change the region to another so..
I decide to downgrade my current version to another bellow 4.0.0.4 that allows to do this...
Using NetOdin3 I've intalled this version but by error I charged R800XX instead R8100XX that I need so I'm stucked in the following screen (I supose that is bricked) And I pray to any of you can help me with this because I'm overwhelmed at this point and my last joker is to use the internal pins of my device to try to connect it to my computer...
ODIN MODE
PRODUCT NAME: SM-R810
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: ON
Secure Download : Enabled
CARRIER_ID:
WARRANTY VOID: 0 (0X0000)
AP SWREV: B:0 K:0 S:0
Secure JTAG Disabled!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sorry, no other way:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
You need USB cable.
Then please only flash correct Firmware SM-R810
Best Regards

adfree said:
Sorry, no other way:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
You need USB cable.
Then please only flash correct Firmware SM-R810
Best Regards
Click to expand...
Click to collapse
HEEEY, I did it! It works perfect now!
I used this tutorial to unbrick it (I had to buy 2 chargers because first one came without 5 pins, but S3 Gears works perfectly, If you are reading this please buy one because I'm seeing that it's becoming difficult to get it now)
And once I unbrick it (I had to try a lot of time because pins didn't connect at all, also I had to cut some plastic of the 5 pins charger motherboard to fit it better) I decide to try again and install the propper version to change my region (that was my very first problem).
So I used this version R600XXU1AQI8_OXA That is Tizen 4.0.0.4 Using NetOdin (Once is totally unbricked and allows Download (Wifi))
And Finaly I used this tutorial to change my region, I used before but with newers version of tizen it's not possible.
https://forum.xda-developers.com/sm...nging-region-samsung-gear-sport-r600-t3771324
Finally I have my Samsung Galaxy Watch SM-R810 with Samsung Pay, It can be very risky only for getting this app but I think Is stupid expend this bunch of money in this watch and cannot use one of the most important uses that is NFC to pay (more when the only reason is the freacking region)
So If you are reading this in the future and Have the same problem than me you can ask here in this post how to fix it.
I'm very pleased with XDA-Developers forum because you saved my life, Thanks!

Hello, i had the same problem when i was trying to downgrade to change the region so i can download samsung pay.
Im trying to do exactly what he tells to do on the video, but my computer is not recognizing the watch as in the video. So the Netodin is not connecting to the watch. I thought perhaps it whas not fit firmly, but i can hear the noise on pc that an usb device was connected. I dont know more i can do. Can someone help me ? (Sorry about my english, im from Brazil)
One more thing, where i can find the original and correct room for sm-R810 ? Thanks a lot!!!

Thomson Android TV, lock on update

Hello everybody.
I have a Thomson 43 android smart TV (43uc6406).
I have a problem for a few days, the tv is stuck on the message "Installing the system update". I left the tv on for 24 hours but the update is blocked and does not advance.
A month ago, android tv started to stutter on the interface and applications. But otherwise the rest worked.
The remote does not seem to respond anymore.
The only thing I can do is unplug the TV and when I plug it back in the Thomson logo appears then the update comes back and hangs.
Do you have any idea how to fix this problem?
Thank you in advance for your suggestions and don't hesitate if you need clarification
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You will need PKG file on USB ,to override this update.
Bellow thread can help...
Thomson Android Percee TV, remains on booting animation.
Hi people. I have a smart TV android, Thomson percee tv, 65" (65UD6406 S). Happens that it remains on android animated loading screen, forever. I guess that I messed up, when in developer mode, clicked on (somewhere in "showing pointer" (or...
forum.xda-developers.com
or
Test: Thomson 55UC6406 und 43UC6406
Test: Thomson 55UC6406 und 43UC6406
www.hifi-journal.de

Thank you very much I will try this and give you some news

I have tried several versions of the .pkg that I found on these links or elsewhere. But it all gave the error "System update failed, please try again". (V8-T658T01-LF1: v534, v544, v551, v574).
When I started to lose hope I found the T658T01-LF1V528 which kept the screen "Please do not power off during updating. This process may take a few minute", the tv even restarted at a time then returned to the message . But it's been 8 hours now and the message does not disappear
Do I have to do something ? Is there a way to find the right software version for this TV ?

Which firmware you have installed ?
Did you remove USB when TV restart ?
Maybe need to flash with V3xx or V4xx ?
Or with OTA zip files ?
Edit:
Or try with "Rxxx" .pkg.....
Downgrade File for TCL C6 (Current Version: V8-T658T01-LF1V534)
Hey guys, I am new to the Android TV scene so bear with me. Recently bought TCL C6 TV. It updated yesterday to Android Oreo but the Color accuracy especially in HDR has fallen considerably, constant dimming of backlight for no reason and not to...
forum.xda-developers.com

I don't know which version of the software I have because I can't access any menu unfortunately
Is there a way to know this version without menu access ?
I'm willing to try all versions one by one if I have to, just having a hard time finding older versions.
For OTA I tried but couldn't because no access to the menu.
Thanks for the link I'll watch it and test

Some more .pkg .......
http://celesw.tcl.com/Test/software/V8-T658T01-LF1V397.rar
http://celesw.tcl.com/Test/software/V8-T658T01-LF1V402.rar
http://celesw.tcl.com/Test/software/V8-T658T01-LF1V521.rar

simonlinex said:
I don't know which version of the software I have because I can't access any menu unfortunately
Is there a way to know this version without menu access ?
I'm willing to try all versions one by one if I have to, just having a hard time finding older versions.
For OTA I tried but couldn't because no access to the menu.
Thanks for the link I'll watch it and test
Click to expand...
Click to collapse
OTA can be flashed also.....(.pkg also)
TV Off, but power plug On.
Insert USB to TV.
Press and hold TV power button until update start (front LED blinks).

OTA files...
Downgrade File for TCL C6 (Current Version: V8-T658T01-LF1V534)
Hey guys, I am new to the Android TV scene so bear with me. Recently bought TCL C6 TV. It updated yesterday to Android Oreo but the Color accuracy especially in HDR has fallen considerably, constant dimming of backlight for no reason and not to...
forum.xda-developers.com
Older version...
http://as-update.cedock.com/apps/resource2/V8T658T01/V8-T658T01-LF1V358/FOTA-OTA/V8-T658T01-LF1V358.zip
http://as-update.cedock.com/apps/resource2/V8T658T01/V8-T658T01-LF1V373/FOTA-OTA/V8-T658T01-LF1V373.zip
http://as-update.cedock.com/apps/resource2/V8T658T01/V8-T658T01-LF1V498/FOTA-OTA/V8-T658T01-LF1V498.zip
http://as-update.cedock.com/apps/resource2/V8T658T01/V8-T658T01-LF1V525/FOTA-OTA/V8-T658T01-LF1V525.zip

Firmware :
V1xx....Android 6
V3xx....Android 7
V5xx....Android 8

Hello Everybody!
I have a similar problem with my Thomson 43uc6406. I have been trying various versions of the firmware but most of them had a lot of bugs and compatibilty issues with which I kinda learned to live with.
Few days ago I tried reinstalling the firmware one more time hoping that i could make it work better than before but it was with bad luck, the tv is now bricked. It doesn´t boot up anymore, just remains with the black screen and the power led turned on. I tried repeating all the steps described in the previous posts but no good sign.
I´m not very technical but from what I understood, the problem might be with the spi chip on the motherboard which needs a reflash with a fresh bios using a eeprom programmer.
Does anybody know any resource where i might find the necesary file to do this or any other way to fix this problem?
Thanks in advance!

AJ MNA TO ZAUJIMA TIEZ MAM TAKY PROBLEM?