[OFFICIAL] LineageOS 18.1 for the OnePlus One - ONE Original Android Development

[OFFICIAL] LineageOS 18.1 for the OnePlus One - ONE Original Android Development

@npjohnson Thank you for your continued efforts into maintaining official builds for bacon. Thanks a lot. Really appreciate this.

@npjohnson Thanks a lot for maintaining it. Can't wait to flash it. Also, do you have any idea when the build will be available?

Unable to download 18.1. Not available on LineageOs website.

@npjohnson mate, I successfully installed it but there's this weird bug which isn't allowing me to get past the security lock. After entering the security pattern, the screen kind of blanks out and then refreshes back to the lock screen. After a while, the entire screen shuts off.
I did the whole installation process again, now the display is kinda dead. The lockscreen doesn't show, but the power options after long pressing the power buttin is shown. Is this a first build bug?? I'm reverting to LOS 17.1 for now

Oswald Boelcke said:
@npjohnson THREAD CLOSED as placeholder are not accepted! Further information.
Please advise the moderators team (best via the report function) to re-open the thread when a download is available, what's currently not the case via the provided download link, AND a link to your kernel source is available to achieve compliance with GPLv2.
Thread re-opened as I realised the build is now available for download.
@npjohnson Please provide a link to your kernel source within the next 5 days to avoid a new closure of the thread. Reference: XDA and the GPL
Click to expand...
Click to collapse
The kernel source, as our wiki clearly states (which I link, and even has build guides), that the link is https://github.com/LineageOS/android_kernel_oppo_msm8974

Purple-_-Tears said:
@npjohnson mate, I successfully installed it but there's this weird bug which isn't allowing me to get past the security lock. After entering the security pattern, the screen kind of blanks out and then refreshes back to the lock screen. After a while, the entire screen shuts off.
I did the whole installation process again, now the display is kinda dead. The lockscreen doesn't show, but the power options after long pressing the power buttin is shown. Is this a first build bug?? I'm reverting to LOS 17.1 for now
Click to expand...
Click to collapse
You need to format data before you upgrade.

done
Oswald Boelcke said:
Thanks for the information. I'd appreciate if you add this link to your OP. Please review the reference that I provided in my earlier post. Direct links are mandatory.
Click to expand...
Click to collapse

npjohnson said:
You need to format data before you upgrade.
Click to expand...
Click to collapse
so.. then.. not dirty update is possible?

drezz2 said:
so.. then.. not dirty update is possible?
Click to expand...
Click to collapse
Correct, as the OP and Wiki both say.

installation work as described, but i still went back to 17.1 because as i want to install my paid app's Play-Store want's me to pay again. Is this a Mindthegapps problem, or with android11

gerald_raaf said:
installation work as described, but i still went back to 17.1 because as i want to install my paid app's Play-Store want's me to pay again. Is this a Mindthegapps problem, or with android11
Click to expand...
Click to collapse
idk why - this affects some users randomly, wipe, and re-install - chances are it won't happen again.

Thank you LineageOS developers.
I'd like to suggest using the official microG release:
bacon
Track release status:
OnePlus One - LineageOS 18.1
LineageOS 18.1 Changelog for OnePlus One (bacon). This page is listing the official LineageOS 18.1 (Android 11 11.0) changes and downloads for OnePlus One (bacon).
www.lineageoslog.com

npjohnson said:
Correct, as the OP and Wiki both say.
Click to expand...
Click to collapse
not the same guide as previous versions? in older versions if I was able to do the dirty install

I have TWRP as my recovery with 17.1. Can I use my existing TWRP to install the 18.1 zip? Do I have to use adb sideload?

zzjea said:
I have TWRP as my recovery with 17.1. Can I use my existing TWRP to install the 18.1 zip? Do I have to use adb sideloa
Click to expand...
Click to collapse
I used the same TWRP recovery I used with 17.1. I installed the zip file, no problem just remember to format data.

cmpque said:
I used the same TWRP recovery I used with 17.1. I installed the zip file, no problem just remember to format data.
Click to expand...
Click to collapse
Thanks, that's what I thought. I have Google Backup on so most of my stuff will be recovered after the format and install.

Unfortunately I stuck on boot loop after install LSposed or Edxposed (clean install), any solution?!

gerald_raaf said:
installation work as described, but i still went back to 17.1 because as i want to install my paid app's Play-Store want's me to pay again. Is this a Mindthegapps problem, or with android11
Click to expand...
Click to collapse
A workaround for this issue is to install Aurora Store and login with your Google account. You'll be able to download your paid apps through Aurora Store, and then they'll be regularly updated via Play Store.

Had to go back to Lineage 17.1 because the new version doesn't let me recover my backups from my google account. Will wait for newer versions and will wait until there's open gapps for android 11.

Related

[ROM][unOFFICIAL] LineageOS 15.1 for Nexus 6P (angler)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Wiki.
Important Info
To flash this rom you need TWRP 3.2.0-0 or newer. https://twrp.me/huawei/huaweinexus6p.html
Make sure you have the radio & bootloader img's installed from the stock oreo 8.1 OPM7.181205.001 Dec 2018 factory image.
They can be extracted from the factory image on google's site here. Or you can use the ones linked below that I already extracted:
radio & bootloader img's: https://androidfilehost.com/?w=files&flid=286833
Those img's can be flashed with fastboot command.
Note: There's an issue happening to some angler users on custom oreo roms. The first boot after flashing rom your sim card might not be detected. It's easy to fix. Just go to lockscreen security settings and change it to 'none' and then reboot. Then you can change it back to whatever you want. This only happens one time when you first flash oreo.
Download Links
rom: https://download.lineageos.org/angler
Note: LineageOS servers no longer make 15.1 builds for any devices. You can use my unofficial builds here. My older builds are here.
Note#2: if you want to switch from an official build to my unofficial builds, follow instructions here.
google apps (optional): https://wiki.lineageos.org/gapps.html (Use arm64 / 8.1)
root su addon (optional): https://download.lineageos.org/extras Note: Use arm64 15.1 zip. After installing the su addon, you can enable root in developer options.
Instructions
If updating from old unofficial to newer unofficial, follow the steps below:
1. if you don't already have them installed, flash the newest radio and bootloader img's linked above.
2. boot into twrp and flash the rom zip.
Reboot & enjoy.
NOTE: if you previously flashed gapps and/or the su addon, there's no need to flash them again. They will be automatically re-installed during rom zip installation.
NOTE2: if you want to switch from an official build to my unofficial builds, follow instructions here.
If coming from a different rom:
1. if you don't already have them installed, flash the newest radio & bootloader img's linked above. also make sure you have the newest twrp, linked above.
2. boot into twrp and wipe system & data & cache.
3. flash rom & gapps & su addon zips (gapps & su zips are optional).
Reboot & enjoy.
Weather Provider Addon (Optional)
For those that like the lineage cLock widget, here's the OpenWeather apk you need to get weather info.
https://download.lineageos.org/extras
Grab the one for version 16.0. It also works with 15.1.
Note: You'll need an api key from OpenWeather.
LineageOS Stats
https://stats.lineageos.org/
Credits
Many thanks to my fellow LineageOS team members and all the contributors out there in the community. :good:
LineageOS device maintainers:
sam3000, razorloves
Source Code:
Device tree: https://github.com/LineageOS/android_device_huawei_angler/tree/lineage-15.1
Kernel tree: https://github.com/LineageOS/android_kernel_huawei_angler/tree/lineage-15.1
Vendor tree: https://github.com/TheMuppets/proprietary_vendor_huawei/tree/lineage-15.1
Android version: 8.1.0 Oreo
Kernel version: Linux 3.10.73

Wooh! First!
Sent from my Nexus 6P using XDA Labs

Hey Razor. I used to be on your builds a couple of years ago in the old hammerhead and looking forward to flash your work again when 15.1 is out, this time on angler. Cheers! :fingers-crossed:

Any bugs? Is it suitable for daily driver? Just tired to wait for official build and want to flash as fast as possible. )

Thanks Razorl!!!!!

Error 7 -- make sure to flash the new twrp recovery if you face this issue!!

i42o said:
ERROR 7
Click to expand...
Click to collapse
Try reading the big bright red letters at the top, under "IMPORTANT INFO"

razorloves said:
Try reading the big bright red letters at the top, under "IMPORTANT INFO"
Click to expand...
Click to collapse
haha. Yeah my bad bro, my bad. got it tho, thanks!

Says no SIM card
Clean flash following instructions, TWRP 3.2, latest bootloader/radio/vendor, flashed vendor -> rom -> gapps. Otherwise no errors.
Any suggestions?

telefantastik said:
Says no SIM card
Click to expand...
Click to collapse
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and won't happen anymore. Then you can go back into security settings and change it back to whatever screen lock option you want.

razorloves said:
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and you can go back into security settings and change it back to whatever screen lock option you want.
Click to expand...
Click to collapse
It's weird though. I have unlock protection and got no issue when flashing this.
Can it also be related to your carrier or something?

ChemoNL said:
I have unlock protection and got no issue
Click to expand...
Click to collapse
Its not just caused by unlock protection. I posted details on the issue in my 14.1 thread about a month ago.

razorloves said:
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and won't happen anymore. Then you can go back into security settings and change it back to whatever screen lock option you want.
Click to expand...
Click to collapse
Awesome, it worked! Thanks

For those interested...
Another new version of twrp came out yesterday. 3.2.1-0
Here's the changelog for it https://twrp.me/site/update/2017/12/09/twrp-3.2.1-0-released.html
You can download it here: https://twrp.me/huawei/huaweinexus6p.html
Here's the changelog for 3.2.0-0 that came out last week, incase you missed it.
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html

Thank you for new thread and ROM.
:fingers-crossed::fingers-crossed::fingers-crossed:

Hi, looking to potentially begin using custom ROMs on my 6P to help combat some battery and performance issues I get. With future updates, do I have to keep manually flashing the radio, etc firmware or can I just OTA/DL zip of lineage and flash? Seems like a bit of a pain :/

domacikolaci said:
Hi, looking to potentially begin using custom ROMs on my 6P to help combat some battery and performance issues I get. With future updates, do I have to keep manually flashing the radio, etc firmware or can I just OTA/DL zip of lineage and flash? Seems like a bit of a pain :/
Click to expand...
Click to collapse
Hi, once a month you need to flash the new vendor for security updates
Google release them once a month (usually the first tuesday of the month)
However when you flash an update that does not require new vendor, you don't need to flash it
edit: just realised you're also from Melbourne, hi

Just have installed the last unofficial in my Angler, coming from another custom rom ( with Nougat). All good. Plan to stay here. Thanks !

Anyone having problems with the phone shutting down saying 0% battery when in reality you still have plenty of battery left? Just did a clean install and it happened after only installing chrome and whatsapp.

Apoena said:
Anyone having problems with the phone shutting down saying 0% battery when in reality you still have plenty of battery left? Just did a clean install and it happened after only installing chrome and whatsapp.
Click to expand...
Click to collapse
Have you been living under a rock for the past year? Lol jk. But see here http://www.androidpolice.com/2016/1...toff-problem-and-its-becoming-a-safety-issue/
tldr; blame Google and Huawei. And get yourself a free replacement or free upgrade.
http://www.androidpolice.com/2017/0...exus-6p-owners-pixel-xl-warranty-replacement/

[ROM][OFFICIAL] LineageOS 16.0 for Xiaomi Mi Note 2

I'm actually using this version and I'm very impressed. Very fluid, very nice and good battery life.
I've installed the GCam with library (see on other thread) and it works like a charm. I'm actually using the lineage-16.0-20190324-nightly-scorpio-signed.zip

It's good that he's already official. In short I will change my rom AEX I pray for this one.

any way to get google pay working with this rom?

Dbertman said:
any way to get google pay working with this rom?
Click to expand...
Click to collapse
Flash OpenGApps.

Which firmware it is recommended to use with this ROM?
The last stable, the last developer? or another?

carl0l said:
Which firmware it is recommended to use with this ROM?
The last stable, the last developer? or another?
Click to expand...
Click to collapse
I used the rom global dev. 8.8.30 and all good, is what they recommended for the unofficial.

SerGioTenerife said:
I used the rom global dev. 8.8.30 and all good, is what they recommended for the unofficial.
Click to expand...
Click to collapse
Thanks, I'm gonna use it.

In this last update does not work send screen to TV Lineage-16.0-20190528-nightly-scorpio . Someone else happens?

carl0l said:
Thanks, I'm gonna use it.
Click to expand...
Click to collapse
.........

No Volte in settings...Can some one help me...

I tried to install the nightly roms os 6 and 7 June for the Mi note 2 global scorpio on my global Version. I had the latest xiaomi.eu rom weekly updated installed prior to installation. I downloaded both the nightly official roms of the 6th and 7th of June. Formatted the data and wiped the cache and system, followed by a adb sideload of the signed nightly roms. Both versions returned a signature error of the zip file. I had the sha256 verified without error.
Can anybody explain what went wrong.
I am currently back on miui 10 eu rom (latest weekly) through twrp recovery.
Issue is solve. Lineagos does not support zip verification. Zip verification to be turned of in TWRP.
Kind regards, Henk

where can I have the original kernel?

dglingos said:
where can I have the original kernel?
Click to expand...
Click to collapse
From offical rom. Just unpack it, threre is should be file kernel.img

be aware 24th of July nightly update break my device, after update refused to boot into system, after two minutes went into TWRP. Got out only by flashing an older version, 21st of July in my case, altogether with Gapps. Have no ideea what caused this, I am using Magisk 19.5 version I think. So far so good now...

LineageOS stopped releasing updates. Do anyone know why? The last one is from the 8 of this month

chemha said:
LineageOS stopped releasing updates. Do anyone know why? The last one is from the 8 of this month
Click to expand...
Click to collapse
Most likely because this one is going to be quite substantial update, and need to be tested thoroughly.

Thanks to Xiaomi, there will be no more official LOS updates to mi note 2

For what reason?
What is the reason for stopping of the updates? What had Xiaomi to do with it?

hblek said:
What is the reason for stopping of the updates? What had Xiaomi to do with it?
Click to expand...
Click to collapse
a DCMA cliamed by Xiaomi on Github has stopped the updates since the august 9th

[OFFICIAL] LineageOS 19.1 for the Moto G7/G7 Power

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Moto G7/G7 Power
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 19.1 thread for the Moto G7/G7 Power.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
Moto G7
river - Official builds
river - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
Moto G7 Power
ocean - Official builds
ocean - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Kernel Source: https://github.com/LineageOS/android_kernel_motorola_sdm632

Nice work. For install going from 18.1 to 19 do we need to flash the copy partition zip like the initial install?

Just installed from 18.1 without issues. Time to play around

PMDPhD said:
Nice work. For install going from 18.1 to 19 do we need to flash the copy partition zip like the initial install?
Click to expand...
Click to collapse
Read the upgrade guide, no.

npjohnson said:
Read the upgrade guide, no.
Click to expand...
Click to collapse
I did. Just wanted to be sure because sometimes the guides leave out steps. Install was fine, looks like it is missing the FM Radio app, any reason why? Thanks.

PMDPhD said:
I did. Just wanted to be sure because sometimes the guides leave out steps. Install was fine, looks like it is missing the FM Radio app, any reason why? Thanks.
Click to expand...
Click to collapse
Fixing it.

Beautiful, solid build! Superb job, you guys!
As far as "bugs unknown" clause is concerned, my river model xt1962-4 does seem to have a location bug since los 18.1 which did NOT occur in 17.1 The bug has been reported here
If anyone with the same model on 18.1 or 19.1 would take time to check whether you also experience this issue, I would greatly appreciate it!

Only issue I have so far is a pop up telling me "Android System Intelligence keeps stopping".

xnotx2 said:
Only issue I have so far is a pop up telling me "Android System Intelligence keeps stopping".
Click to expand...
Click to collapse
My brain notification service shows the same message from time to time as well: "System Intelligence keeps stopping"

xnotx2 said:
Only issue I have so far is a pop up telling me "Android System Intelligence keeps stopping".
Click to expand...
Click to collapse
Fixed in next build.

xnotx2 said:
Only issue I have so far is a pop up telling me "Android System Intelligence keeps stopping".
Click to expand...
Click to collapse
I haven't seen this error in this build. If my memory serves me, I have seen this error it in the Pixel Experience ROM last year with a different device. It turned out that flashing a newer GAPPS package fixed this. I used the Mind The GApps 12.1 for this build and seems to be ok.

eulos said:
Beautiful, solid build! Superb job, you guys!
As far as "bugs unknown" clause is concerned, my river model xt1962-4 does seem to have a location bug since los 18.1 which did NOT occur in 17.1 The bug has been reported here
If anyone with the same model on 18.1 or 19.1 would take time to check whether you also experience this issue, I would greatly appreciate it!
Click to expand...
Click to collapse
I just checked Google Maps. Seems very accurate and not jumping around like in the report.

PMDPhD said:
I haven't seen this error in this build. If my memory serves me, I have seen this error it in the Pixel Experience ROM last year with a different device. It turned out that flashing a newer GAPPS package fixed this. I used the Mind The GApps 12.1 for this build and seems to be ok.
Click to expand...
Click to collapse
This is what I used.
lineage-19.1-20220422-UNOFFICIAL-river
MindTheGapps-12.1.0-arm64-20220416_174313
Woot. Just noticed it's being fixed in next build.

All good with the installation but when starting the cel it can't communicate with the google server and I can't log in in any way, I reinstalled 3 times with the same result... any ideas?

what version of twrp is recommended for installing the moto g7 power ocean builds. i have twrp 3.5.2.10 on my device. want to be sure that it will install with that version of twrp. i prefer twrp over the lineage recovery for installing builds. currently the moto g7 power i have is on lineage 18.1 but would like to update to lineage 19.1 when the next build is out.

mrk2815 said:
what version of twrp is recommended for installing the moto g7 power ocean builds. i have twrp 3.5.2.10 on my device. want to be sure that it will install with that version of twrp. i prefer twrp over the lineage recovery for installing builds. currently the moto g7 power i have is on lineage 18.1 but would like to update to lineage 19.1 when the next build is out.
Click to expand...
Click to collapse
use lineage recovery.

eulos said:
My brain notification service shows the same message from time to time as well: "System Intelligence keeps stopping"
Click to expand...
Click to collapse
Rule #1: No tokin' while flashing bro...

Loving the Android 12 experience on my G7. I too am experiencing some of the same issues described here. When flashing the Official ROM, and MindtheGapps, the setup program couldn't communicate with Google. It kept telling me to connect to the Internet, even though my home wifi was showing as "Connected." When I flashed the Unofficial (with Gapps included), that allows me to register, and I keep getting "System Intelligence keeps stopping" message. I tried to be sneaky and flash the official ROM through recovery/ADB after installing and setting up the unofficial ROM, but that put me in a boot loop.
Does the unofficial ROM get updates as frequently as the official (approx. every week)?

JShan said:
Loving the Android 12 experience on my G7. I too am experiencing some of the same issues described here. When flashing the Official ROM, and MindtheGapps, the setup program couldn't communicate with Google. It kept telling me to connect to the Internet, even though my home wifi was showing as "Connected." When I flashed the Unofficial (with Gapps included), that allows me to register, and I keep getting "System Intelligence keeps stopping" message. I tried to be sneaky and flash the official ROM through recovery/ADB after installing and setting up the unofficial ROM, but that put me in a boot loop.
Does the unofficial ROM get updates as frequently as the official (approx. every week)?
Click to expand...
Click to collapse
He mentioned above that his unofficial builds are roughly monthly.

JShan said:
Loving the Android 12 experience on my G7. I too am experiencing some of the same issues described here. When flashing the Official ROM, and MindtheGapps, the setup program couldn't communicate with Google. It kept telling me to connect to the Internet, even though my home wifi was showing as "Connected." When I flashed the Unofficial (with Gapps included), that allows me to register, and I keep getting "System Intelligence keeps stopping" message. I tried to be sneaky and flash the official ROM through recovery/ADB after installing and setting up the unofficial ROM, but that put me in a boot loop.
Does the unofficial ROM get updates as frequently as the official (approx. every week)?
Click to expand...
Click to collapse
Once a month.

[OFFICIAL] LineageOS 19.1 for the Google Pixel 3a

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Pixel 3a
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 18.1 thread for the Google Pixel 3a .
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
sargo - Official builds
sargo - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.9

I was able to successfully download the unoffical and able to get the rom running. I could not get mindthegapps to stick though...Error 1 I think (not enough space). I tried another gapps packet to no avail. Not sure of the issue so I'm just putting this out out there for others.

mmead1143 said:
I was able to successfully download the unoffical and able to get the rom running. I could not get mindthegapps to stick though...Error 1 I think (not enough space). I tried another gapps packet to no avail. Not sure of the issue so I'm just putting this out out there for others.
Click to expand...
Click to collapse
Because the unofficial includes GApps - and a lot of them at that - look at the OP note

npjohnson said:
Because the unofficial includes GApps - and a lot of them at that - look at the OP note
Click to expand...
Click to collapse
Well I feel like an idiot haha! Okay I'll give it another go Thanks a ton!

Okay so I'm up and running on the Unofficial haha! Thanks for the help above. Install was quick and easy...not sure what I missed yesterday but it was the same downloaded file so I nixed something up.
I was getting this "android system intelligence keeps stopping" while on the rom for the first hour - as I added all my normal apps to the phone, it went away. Not sure why - don't care now Everything seems to work but I'll keep you in the loop.

Stupid question: from 18.1 to 19.1, do i need to flash the A12 mindthegapps package too?
I am currently running LOS 18.1 with the A11 version of mindthegapps package....

Fentadroid said:
Stupid question: from 18.1 to 19.1, do i need to flash the A12 mindthegapps package too?
I am currently running LOS 18.1 with the A11 version of mindthegapps package....
Click to expand...
Click to collapse
If you download the unoffical rom...it comes with gapps included with it.
Not sure about the official rom.

I installed it, and seems to be working really well. Here are some pictures, for anyone who wants to see.

Fentadroid said:
Stupid question: from 18.1 to 19.1, do i need to flash the A12 mindthegapps package too?
I am currently running LOS 18.1 with the A11 version of mindthegapps package....
Click to expand...
Click to collapse
I just installed the official one today. You do have to install MindTheGapps on it, even if you had it on 18.1. it also has to be installed right after you sideload the Lineage OS installation zip file, before you boot to android.

mmead1143 said:
Okay so I'm up and running on the Unofficial haha! Thanks for the help above. Install was quick and easy...not sure what I missed yesterday but it was the same downloaded file so I nixed something up.
I was getting this "android system intelligence keeps stopping" while on the rom for the first hour - as I added all my normal apps to the phone, it went away. Not sure why - don't care now Everything seems to work but I'll keep you in the loop.
Click to expand...
Click to collapse
its out of date, next build will have it fixed.

Apart from a few A11 to 12 things I'll get used to (personal nitpicks, lol) everything's running well. I do miss the old 18.1 blue accent, are there plans to add other color accents to the ROM itself? Currently I'm using tulsadiver's color mod. Either way, thank you for helping keep our devices alive.

Mokura3rd said:
Apart from a few A11 to 12 things I'll get used to (personal nitpicks, lol) everything's running well. I do miss the old 18.1 blue accent, are there plans to add other color accents to the ROM itself? Currently I'm using tulsadiver's color mod. Either way, thank you for helping keep our devices alive.
Click to expand...
Click to collapse
I can confirm. The update went well and everything is working fine. Well done.

Same here - both the unofficial and official work flawlessly. I've gone back n forth haha!

Mokura3rd said:
Apart from a few A11 to 12 things I'll get used to (personal nitpicks, lol) everything's running well. I do miss the old 18.1 blue accent, are there plans to add other color accents to the ROM itself? Currently I'm using tulsadiver's color mod. Either way, thank you for helping keep our devices alive.
Click to expand...
Click to collapse
On officials, no, it's all monet.
On unofficial, hold Home Screen down, select "wallpaper and styles", then pick a color!

Upgraded from LOS 18.1 to 19.1 and flashed mindthegapps12 and magisk. Everything seems to work fine until I tried making bluetooth call. My favorite bluetooth earpiece is extremely quiet. But another one works just fine. Looked in dev options and saw that all codecs are greyed out. Can anyone confirm this is happening on a clean install?

batp said:
Upgraded from LOS 18.1 to 19.1 and flashed mindthegapps12 and magisk. Everything seems to work fine until I tried making bluetooth call. My favorite bluetooth earpiece is extremely quiet. But another one works just fine. Looked in dev options and saw that all codecs are greyed out. Can anyone confirm this is happening on a clean install?
View attachment 5601803
Click to expand...
Click to collapse
Not here - Clean install and all my blu tooth devices are working properly. GL

Just to be sure, if I'm currently running the official LOS 18 builds with MindtheGapps, all I need to do is flash official LOS 19 and MindtheGapps again, and that's it? No need to flash firmware or anything? And it won't wipe user data?
Also, any chance the rounded corners got fixed in LOS 19?

Don't need any changes on firmware side to flash Lineage 19.1? Slot a is on april patch, slot b on mai patch. That can keep, right?

Thanks for bringing up LineageOS 19 officially @npjohnson and keeping the Pixel 3a alive after google's decision to drop it after this May! I searched a lot but I couldn't find a good answer: is it possible to relock the bootloader after the installation? Is LineageOS (enough) signed to pass the boot procedure?

indrekh said:
Just to be sure, if I'm currently running the official LOS 18 builds with MindtheGapps, all I need to do is flash official LOS 19 and MindtheGapps again, and that's it? No need to flash firmware or anything? And it won't wipe user data?
...
Click to expand...
Click to collapse
All Yes

[ROM][OFFICIAL] LineageOS 19.1 weeklies for Xiaomi Mi 5

Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Working:
Camera (and flashlight)
Fingerprint reader
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
Encryption (FBE)
WiFi Display
Broken:
Nothing (?)
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.Builds are based off the Xiaomi's Android 8.0 firmware with proprietary blobs from MIUI V10.2.2.0.OAAMIXM global stable package.
Device wiki:
Official wiki link
Downloads:
Official download links
Installation:
Follow instructions found in the respective wiki page

First build is already out! Remember, you need to format userdata since we moved from FDE to FBE.

Just had to comment and say, this ROM is absolutely beautiful. The implementation of 19.1 for gemini is just incredible. Little details with the colours, icons, sizing and highlights make it a joy to use! (I suppose some of this might be android 12s 'Material You' but I'm still blown away.
Can already tell the device is running much faster than before (had been on a recent 18.1 build).
This is actually so well polished that I will have to look into getting a new battery. Only reason I'm not using gemini as a primary device. Anybody have a recommendation on where to get a new battery?
Big thanks to bgcngm, absolutely amazing work. It is crazy to think such an old device now can still run the latest lineage!

I had trouble flashing this from twrp even after formatting data partition.
Flashed lineage is recovery and flashed through adb sideloa, everything went smoothly.
Thanks for such a polished build!!
I use this phone with work profile as well.
Will keep posted about it as well

(sorry for my english)
very very thanks!
smooth rom, works flawlessly
same problem here:
when flashing from twrp I got error, but no problems with lineage official recovery
the only little bug I found:
when I turn off the wifi completely, the 'internet button' remains lit

Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)

Heliosaga said:
Can't install with twrp... log says error code 1, after format data. that error still showing...
btw i updated twrp version (which is have version support android 12 encryption) and i did again steps and still error code 1 is exist. no luck charm.
And cant install lineage recovery because my pc cant recognize my phone.. guess i have to wait for this 18.1 features... for now.. (sigh)
Click to expand...
Click to collapse
Hi, I had the same issue. I had also installed the latest twrp (3.7.0_9). What worked for me was using the lineageos recovery instead of twrp. You can find that here:
https://mirrorbits.lineageos.org/recovery/gemini/20221016/lineage-19.1-20221016-recovery-gemini.img
Not sure if there is a proper solution to get twrp to work, this is more of a workaround.

Currently, Lineage Recovery must be used.
Inkypen's TWRP supports FBE, but it is an older version and only supports encryption up to Android 11.

Can we instal gapps from android 11?

kaishi12 said:
Can we instal gapps from android 11?
Click to expand...
Click to collapse
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org

starlord047 said:
Looks like the Lineageos site has mindthegapps linked for android 12(L)
Google apps | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
How to instal zip file using lineage recovery?

kaishi12 said:
How to instal zip file using lineage recovery?
Click to expand...
Click to collapse
I am not sure. I sideloaded it with ADB.

starlord047 said:
I am not sure. I sideloaded it with ADB.
Click to expand...
Click to collapse
Yeah thks try flash twrp back with stuck on screen, sideload work with lrecov

Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks

Gvasilhs68 said:
Hi and thanks for keeping alive the mi5. I have only one issue with the contactless pay, always says that the device is rooted. I have install magisk with safetynet and almost all the apk is on zygisk i can make bank transaction with ebanking play store is ok but still can't make contactless payments. Any ideas. Thanks
Click to expand...
Click to collapse
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com

yevac said:
You can try the magisk hide module
[MODULE] [DEPRECATED] MagiskHide Props Config - SafetyNet, prop edits, and more - v6.1.2
MagiskHide Props Config v6.1.2 Note: This project is dead, and has been for some time. I have not been involved in the Android modding scene for some time and I no longer have the energy to take it up again. If anyone feels like taking over...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried but not working.
Everything is ok with this. https://github.com/kdrag0n/safetynet-fix/files/9356078/safetynet-fix-v2.3.1-MOD.zip

Multiuser also working fine!!

Any idea about this "wakelock" in battery usage?

I am now fully convinced that you and the other Mi 5 maintainers are superhuman, @bgcngm. No way is this possible for regular people.
Famous last words: https://forum.xda-developers.com/t/...os-18-1-for-xiaomi-mi-5.4170027/post-83610929

bgcngm said:
So, just an heads-up. I am going to promote Mi 5 (gemini) to start getting A12 based builds. BIG WARNING: you will need to wipe userdata because we have switched from FDE to FBE. F2FS is no longer supported either.
Click to expand...
Click to collapse
If the device is not encrypted, then wiping userdata doesn't apply, right?

Develop Bugs

welcome