Hello gentlemen,
While flashing the stock ROM in my Cubot X30 using the SP flash tool I have made a mistake selecting "Format and download" instead of "download only". At the end of process I have found a red watermark on my screen "TEE key not write Google key not write". After searching for various solutions with no success I have asked to cubot.net support. Following the answer:
The google key was lost and needs to be written.
Here is the tutorial.
109.52 MB file on MEGA
mega.nz
In the link all the necessary to fix the problem, worked fine for my device.
Hope this will help.
Thanks for providing the fix feedback for those who may need it!
Mod edit - 3 posts merged and translated by https://www.deepl.com/translator:
I'm having the same problem
Thanks, I'll try here
Hello friend I'm with the same problem and with the same device cubot x30 software version 23 downloaded the files available did the procedure I could correct the imei but still follows the red watermark written "TEE key not write google key not write" I understood the whole process but the key that asks in the software SN Write TOOL in the part that says "Attention Key" (something like that) refers to the verification key of google by what I understood that corresponds to a file format (. bin) more in the files available for download I did not see any .bin file that could use or any tutorial that tells me where or how to extract such a .bin file more finally could tell me how you got this google key in your procedure so I can repeat here and tbm get success, I await a return thank you already!
******************************
Estou com o mesmo problema
Obrigado vou tentar aqui
Olá amigo estou com o mesmo problema e com o mesmo aparelho o cubot x30 versão 23 do software baixei os arquivos disponibilizados fiz o procedimento consegui corrigir o imei porém ainda segue a marca d'agua vermelha escrita "TEE key not write google key not write" eu entendi todo o processo porém a chave que pede no software SN Write TOOL na parte que diz "Attention Key" (algo assim) se refere a chave de verificão do google pelo que entendi que corresponde a um arquivo do formato (.bin) mais nos arquivos disponibilizados para download eu não vi nenhum arquivo .bin que pudesse usar ou algum tutorial que me diga onde ou como extrair tal arquivo .bin mais enfim poderia me dizer como você conseguiu obter essa chave google no seu procedimento pra que eu possa repetir aqui e tbm obter sucesso, aguardo um retorno obrigado desde já!!
*****************************
@williammedeiros Please use the English language (or add an English translation at least)!
Please review the XDA Forum Rules with special emphasis on rule no. 4!
Regards
Oswald Boelcke
Related
Boa noite amigos, gostaria de uma ajuda, tenho um redmi 7 e tentei instalar uma atualização da miui nele através do twrp, flasheei ela e um disable vm verity juntos a ROM não foi instalada só o vm. Desde então se eu tento cadastrar um bloqueio de tela seja por PIN ou digital ele trava e se eu por somente senha numérica quando tento desbloquear a tela ele não reconhece a senha e tenho que dar reset nele . Como faço pra mudar isso ? Agradeço qualquer ajuda
MOD EDIT: Added English translation below
Good night friends, I would like some help, I have a redmi 7 and I tried to install an update of miui on it through twrp, flashed it and a disable vm verity together the ROM was not installed only the vm. Since then if I try to register a screen lock either by PIN or digital it locks and if I only use a numeric password when I try to unlock the screen it does not recognize the password and I have to reset it. How do I change this? I appreciate any help.
Hi @alan0283, I see you're new here and this is your first post. Welcome to XDA! Please note that XDA is universal forum, and only English is permitted to be used across the website. I request you to please read the forum rules before posting going foward. You can read them by clicking the following link: https://forum.xda-developers.com/announcement.php?a=81
As a courtesy to you this time, I have added the English translation of your post (using Google Translate) in your post above. Please use English going forward.
Thanks for your cooperation and understanding.
Regards,
shadowstep
Forum Moderator
---------------------------------------------------------------------------
Portuguese Translation (using Google Translate):
Oi @alan0283, vejo que você é novo por aqui e este é seu primeiro post. Bem-vindo ao XDA! Observe que o XDA é um fórum universal e somente o inglês pode ser usado em todo o site. Peço que leia as regras do fórum antes de postar em frente. Você pode lê-los clicando no seguinte link: https://forum.xda-developers.com/announcement.php?a=81
Como cortesia a você desta vez, adicionamos a tradução em inglês da sua postagem (usando o Google Translate) na postagem acima. Por favor, use o inglês daqui para frente.
Obrigado por sua cooperação e compreensão.
Saudações,
shadowstep
Moderador do Fórum
alan0283 said:
Boa noite amigos, gostaria de uma ajuda, tenho um redmi 7 e tentei instalar uma atualização da miui nele através do twrp, flasheei ela e um disable vm verity juntos a ROM não foi instalada só o vm. Desde então se eu tento cadastrar um bloqueio de tela seja por PIN ou digital ele trava e se eu por somente senha numérica quando tento desbloquear a tela ele não reconhece a senha e tenho que dar reset nele . Como faço pra mudar isso ? Agradeço qualquer ajuda
MOD EDIT: Added English translation below
Good night friends, I would like some help, I have a redmi 7 and I tried to install an update of miui on it through twrp, flashed it and a disable vm verity together the ROM was not installed only the vm. Since then if I try to register a screen lock either by PIN or digital it locks and if I only use a numeric password when I try to unlock the screen it does not recognize the password and I have to reset it. How do I change this? I appreciate any help.
Click to expand...
Click to collapse
You completely removed the encryption of the data section, which is the problem, you only need to remove DM-Verity, through the item in TWRP, in your case, you need to return the file with a patch to vendor / etc / fstab.gcom and everything will be.
Mod edit - translated by https://www.deepl.com/translator
Can anyone help me with this problem,i have used smart assistant,rsdlite,adb,twrp,blink gsi,nothing solved,the base version ends in "u",when i type in fastboot to see the imei,it appears
there,anyone have any solution for me?
****************************
Alguém pode me ajudar com esse problema,já usei o smart assistente,rsdlite,adb,twrp,pisca gsi,nada resolveu, a versão de base termina em "u" ,quando dígito no fastboot pra ver o imei,ele aparece
lá ,alguém tem alguma solução pra mim?
Mod edit - translated by https://www.deepl.com/translator
good afternoon dear friend same problem here imei "0" I am here researching some solution more so far without success we have to wait for the devs
develop more Roms and mod for this device. I am also facing problems with the unlock bootloader because the option unlock OEM and inaccessible in the settings !!!!
****************************
boa tarde caro amigo mesmo problema aqui imei "0" estou aqui pesquisando alguma solução mais ate agora sem sucesso temos que aguardar os devs
desenvolver mais Roms e mod para este aparelho. também estou enfrentando problemas com a desbloqueio de bootloader pois a opção desbloqueio de OEM e inacessível nas configuração !!!
Murilojhg said:
Alguém pode me ajudar com esse problema,já usei o smart assistente,rsdlite,adb,twrp,pisca gsi,nada resolveu, a versão de base termina em "u" ,quando dígito no fastboot pra ver o imei,ele aparece
lá ,alguém tem alguma solução pra mim?
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
I have one that does not enter the bootloader, it stays Product/Variant: channel 0000000000000000000 32GB PVTA
and more information FV=00000000000000000001
no program can recover or finish the installation of any rom.
****************************
eu to com um que não entra no bootloader, fica Product/Variant: channel 000000000000000 32GB PVTA
e mais a informação FV=0000000000000001
nenhum programa consegue recuperar ou finalizar a instalação de alguma rom.
Edu Furin said:
eu to com um que não entra no bootloader, fica Product/Variant: channel 000000000000000 32GB PVTA
e mais a informação FV=0000000000000001
nenhum programa consegue recuperar ou finalizar a instalação de alguma rom.
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
have you tried this https://forum.xda-developers.com/t/...ike-hard-brick-moto-g7-play-xt1952-2.4371489/
****************************
ja tentou esse https://forum.xda-developers.com/t/...ike-hard-brick-moto-g7-play-xt1952-2.4371489/
Hello and good morning, @Murilojhg @Eisho89 @Edu Furin @Androi100
As courtesy I've translated your above posts. This is just a friendly reminder that English is the mandatory language! With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Portuguese posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
hello guys, I flashed the boot.img patched in magisk and the device ended up bricking, I can enter fastboot mode but the screen is off too, I tried several alternatives but because it is a Chinese version it is difficult to find something, I have tried SP flash tool but as I can't see the screen, I can't tell when the device turns off to be able to enter download mode (vol up + vol down), thank you who can help me.
*sorry for my translator english.
Morretz said:
olá pessoal, fiz o flash do boot.img patcheado no magisk e o dispositivo acabou travando, posso entrar no modo fastboot mas a tela também está desligada, tentei várias alternativas, mas por ser uma versão chinesa é difícil encontrar algo, eu Já experimentei a ferramenta SP flash mas como não consigo ver o ecrã, não consigo dizer quando o aparelho desliga para poder entrar no modo de download (vol para cima + vol para baixo), obrigado que podem me ajudar.
* desculpe pelo meu tradutor inglês.
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator:
Hi, did you manage to get out of the Brick? I tried ROOT and TWRP, I can not. Do you have a link to a procedure
obs. I'm on UI 2.0, of RMX2121
*********************
Oi, conseguiu sair do Tijolo? Tentei por ROOT e TWRP, nao consigo. Tem algum Link de procedimento
obs. estou na UI 2.0, do RMX2121
@Nelson Noslen Please use the English language! XDA Forum Rules:
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Nelson Noslen said:
Oi, conseguiu sair do Tijolo? Tentei por ROOT e TWRP, nao consigo. Tem algum Link de procedimento
obs. estou na UI 2.0, do RMX2121
Click to expand...
Click to collapse
Hello, I did, via SP flashtool
Fiz tudo mas não consegui ativar o modo eom do celular, sim eu já fui no modo de desenvolvedor e ativo ele , ele aparece que vai restaurar de fábrica , faço todas as configurações após a restauração, ai ativo de novo o modo desenvolvedor e oem ao invés de ativar ele aparece de novo que vai restaurar de fábrica e assim, só fica assim.
meu modelo é binário 6
Não está no Android 10q
já troquei a rom oficial e nada
alguém sabe o que está acontecendo ?
Translated by GT: I did everything but I couldn't activate the mobile's eom mode, yes I've already been in developer mode and activate it, it appears that it will restore from the factory, I make all the settings after the restoration, then activate again the developer mode and oem when instead of activating it appears again that it will restore from factory and so, it just stays like this.
my model is binary 6
Not on Android 10q
I already changed the official rom and nothing
does anyone know what is going on?
@Alexcanvil Greetings, and welcome to XDA. Please post in English as per XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and enjoy your stay on XDA.
-Regards: Badger50 FSM
Boa Noite.
Estou com problema no meu motorola edge x30, comprei o aparelho pelo aliexpress e veio com ROM GLOBAL, eu sem saber que era uma rom modificada, bloqueie o bootloader para usar NFc e aplicativos bancários. Infelizmente o aparelho ficou travado na tela inicial com a mensagem; ´´ No valid operating system could be found. the device will not boot.´´
Após isso, tentei usar método de desbloqueio pela motorola extraindo um codigo e recebi o codigo de desbloqueio pelo email com codigo YMNULPFQHGQKLSKSNKBB. Usei no processo de desbloqueio e não funcionou dando failed. (fastboot oem unlock YMNULPFQHGQKLSKSNKBB). e agora não consigo colocar nenhuma stock rom do aparelho e nem desbloquear. TENTEI pelo aplicativo da LENOVO recuperação de dados (Rescue and Smart Assistant) também sem exito, não foi encontrado a rom firmware do aparelho. o que fazer?
AJUDEM-ME A SOLUCIONAR ESSE PROBLEMA!
OBRIGADO A TODOS.
Mod translation via GT...AGAIN!
Good evening.
I have a problem with my motorola edge x30, I bought the device through aliexpress and it came with a GLOBAL ROM, without knowing it was a modified rom, block the bootloader to use NFc and banking applications. Unfortunately the device was stuck on the home screen with the message; ´´ No valid operating system could be found. the device will not boot.´´
After that, I tried to use the unlock method by motorola by extracting a code and I received the unlock code by email with code YMNULPFQHGQKLSKSNKBB. I used it in the unlocking process and it didn't work giving failed. (fastboot oem unlock YMNULPFQHGQKLSKSNKBB). and now I can't put any stock rom on the device or unlock it. I tried using the LENOVO data recovery application (Rescue and Smart Assistant) also without success, the device firmware rom was not found. what to do?
HELP ME SOLVE THIS PROBLEM!
THANK YOU ALL.
@Julio.cesalb
Greetings, and welcome to XDA. As a "last time" courtesy, I have translated all your posts to this point. Please take a moment to review all XDA Forum Rules again, in particular
XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation will be most appreciated and expected for all of your future posts. Thank you.
-Regards: Badger50
Senior Moderator
Julio.cesalb said:
Boa Noite.
Estou com problema no meu motorola edge x30, comprei o aparelho pelo aliexpress e veio com ROM GLOBAL, eu sem saber que era uma rom modificada, bloqueie o bootloader para usar NFc e aplicativos bancários. Infelizmente o aparelho ficou travado na tela inicial com a mensagem; ´´ No valid operating system could be found. the device will not boot.´´
Após isso, tentei usar método de desbloqueio pela motorola extraindo um codigo e recebi o codigo de desbloqueio pelo email com codigo YMNULPFQHGQKLSKSNKBB. Usei no processo de desbloqueio e não funcionou dando failed. (fastboot oem unlock YMNULPFQHGQKLSKSNKBB). e agora não consigo colocar nenhuma stock rom do aparelho e nem desbloquear. TENTEI pelo aplicativo da LENOVO recuperação de dados (Rescue and Smart Assistant) também sem exito, não foi encontrado a rom firmware do aparelho. o que fazer?
AJUDEM-ME A SOLUCIONAR ESSE PROBLEMA!
OBRIGADO A TODOS.
Mod translation via GT...AGAIN!
Good evening.
I have a problem with my motorola edge x30, I bought the device through aliexpress and it came with a GLOBAL ROM, without knowing it was a modified rom, block the bootloader to use NFc and banking applications. Unfortunately the device was stuck on the home screen with the message; ´´ No valid operating system could be found. the device will not boot.´´
After that, I tried to use the unlock method by motorola by extracting a code and I received the unlock code by email with code YMNULPFQHGQKLSKSNKBB. I used it in the unlocking process and it didn't work giving failed. (fastboot oem unlock YMNULPFQHGQKLSKSNKBB). and now I can't put any stock rom on the device or unlock it. I tried using the LENOVO data recovery application (Rescue and Smart Assistant) also without success, the device firmware rom was not found. what to do?
HELP ME SOLVE THIS PROBLEM!
THANK YOU ALL.
Click to expand...
Click to collapse
I have same problem.... flashing_locked
Bilal-Dz-31 said:
I have same problem.... flashing_locked
Click to expand...
Click to collapse
Found any solution?