I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume
I have a pair of bluetooth headphones and a bluetooth receiver in my car.
Once i pair either one to my Touch Pro 2, i noticed that raising/lowering the volume on my HD2 does not affect the audio what so ever(unless i put it on mute).
The music sounds very loud and distorted, and i cant control the volume either way...Anyone else run into this issue? How can i solve it?
That's normal. You need to adjust the volume at the receiving end.
I have the exact same problem. Not sure why as when I pair up to my speakers, the phone tells me it cannot control the volume, yet it worked fine on my "Touch Pro" (the 1st one) and my Kaiser. Not looked for a solution, because its not much of an issue for me really.
Mesquire said:
That's normal. You need to adjust the volume at the receiving end.
Click to expand...
Click to collapse
But the problem is that, the audio being streamed from the HD2 is so loud and distorted, that i have to turn it down(but i cant).
So even if i turn it down on the receiving end, the distortion is still there.
With my old samsung omnia, i was able to turn the music up or down from the phone...I dont understand why this isnt possible with the Touch Pro 2.
The music coming from my phone is unlistenable. The distortion ruins the audio. Which really sucks, because i spent $300 on a car reciever with bluetooth!
There has to be a solution! Come on XDA!
Try turning it down on the phone first? Or get a player that uses it's own volume control instead of the system volume (I believe Mort Player and Nitrogen will do this).
jason02 said:
But the problem is that, the audio being streamed from the HD2 is so loud and distorted, that i have to turn it down(but i cant).
So even if i turn it down on the receiving end, the distortion is still there.
With my old samsung omnia, i was able to turn the music up or down from the phone...I dont understand why this isnt possible with the Touch Pro 2.
The music coming from my phone is unlistenable. The distortion ruins the audio. Which really sucks, because i spent $300 on a car reciever with bluetooth!
There has to be a solution! Come on XDA!
Click to expand...
Click to collapse
Same problem here!!!
No volume control at all on TP2, and volume of music cant be changed through the system volume control either
I have a bluetooth connection to my motorcycle intercom system. I had the same problem, sort of.
I installed Conduits Pocket Player, and use the equalizer to bring down the level of the Bluetooth. That worked well enough for what I needed to do.
I read somewhere else on the forum here that this issue is attributed to the Widcomm Buetooth stack on our phones. Whenever I connect my headset to my phone or my laptop, I receive a warning that the volume must be adjusted on the output device, and cannot be adjusted on the phone/computer. It may be related to the poor support for AVRCP.
Avatar28 said:
Try turning it down on the phone first? Or get a player that uses it's own volume control instead of the system volume (I believe Mort Player and Nitrogen will do this).
Click to expand...
Click to collapse
ok, so it seems that this wincomm bluetooth stack or whatever SUCKS. You're right....I guess the only work around i guess is a player that doesnt use the system volume, like coreplayer.
Coreplayer is great for movies, but for playing mp3's i would prefer Slide 2 Play.
Havent tried nitrogen yet though.
Does a mp3 player exist that is similar to slide 2 play, but doesnt use the system volume of the phone?
I too am not able to use many of the bluetooth audio accessories such as my jabra headphones, desktop speakers and my indash audio system. None of which work as they did with my Kaiser. This was supposed to be an upgrade to my Tilt and it doesnt even support the OLD protocals that were common 2 years ago?? Im seriously considering switching to blackberry. Anyone intrested in a nearly new Tilt 2. Goodbye htc (high tech crap)
THis is a problem with the bluetooth stack, just email HTC so they can get a patch for this. or microsoft because they are the ones that control what stack it gets.
this Goes for the HD2 and others too
Hi,
After updating to Gingerbread 2.3.3, build 2.36.405.8, the headset controls (rew,fwd,play) stopped working. Altough I have selected in my music application, Poweramp to be the primary app, which should be able to control the headset buttons, I don't get any action, not even on the HTC music app.
At first it worked but it was a bit laggy and now is not working at all. Is this problem related to any other app I have installed?
If I have to do a factory reset...how can I do that?
Thanks in advance for help
try setting power amp not to control the headphone controller, save these settings and then re-apply the ability to control the headphones, worked for me, although eventually I dropped PowerAmp and tried Winamp for Android, really awesome.
Thanks for support, tryed it and didn't work. I think it might be a hardware problem with the buttons. I'm gonna test the headset an another phone to be sure. Will keep you updated Does anybody know if the service guarantee includes also the repair of the headset?
I have KODI on my AFTV connected to a Phillips TV and a Bose Speaker set connected to the TV. Is there a way to control the volume? Kodi volume control doesn't work? Please help!
Just FYI..It doesnt work on aftv , volume control...use your remote to control volume on your bose speakers.[emoji106] [emoji1]
TV cannot control volume output to speakers! What can I do?
I suppose the Bose speakers are connected to the Television. if so... the tv can control the volume output on a set range.
rueda said:
I suppose the Bose speakers are connected to the Television. if so... the tv can control the volume output on a set range.
Click to expand...
Click to collapse
I use an app called Base EQ. It has an equalizer with a wide range of choices on one side, and volume control on the other. You can't adjust the volume with the remote, but it works with a mouse. The only downside might be that you can't adjust the volume through the app while in another app. You could also try Pie Control and other similar apps. I actually use Pie Control on my Fire TV, Galaxy S4, and Galaxy Tab 3 8.0. A mouse is needed to control Pie with, but if I remember right it does have volume control options that can be placed on one of the two available levels. If possible, I'd recommend installing Aptoid, since the last time I tried to find Pie Control in the Playstore I couldn't find it. It's checking out.
will4958 said:
I use an app called Base EQ.
Click to expand...
Click to collapse
You have any links to this app?
And sure its working on fire tv when watching movies, due to all sound is digitally from source?