Related
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Diego009 said:
hi, i have problem with display a want send my phone to repair center,
but a forgot oficial firmware location csc/pda and others
i have 3.oficial stock rom
Region: O2C (Czech Republic (O2C)) PDA: I9195XXUAMG4 Changelist: 1097013
O2C (Czech Republic (O2C)) PDA: I9195XXUAMF7 Changelist: 891972
TMZ (Czech Republic (T-Mobile)) PDA: I9195XXUAMF6 Changelist: 876741
samebody help witch rom flash to my phone ?
i have buy in alza.cz
Click to expand...
Click to collapse
Hi,
I personally bought in O2, so I am sure I have got I9195XXUAMG4. In order to get Cyanogenmod, I had to rooted it. Now I want to go completely back, original recovery and ROM, but did not find any guide for it
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
b0g said:
hy,
look on the box of mobile, is a code like GT-I9195ZKACOA for my case; then code for my region is COA;
if your region is O2C then flash I9195XXUAMG4 firmware
Click to expand...
Click to collapse
on box of mobile is nothig but this one
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
b0g said:
hy,
if you buy from www.alza.cz , i find in this site 4 models of samsung i9195:
GT-I9195ZKAETL, GT-I9195ZBAETL, GT-I9195ZRAETL and GT-I9195ZWAETL , all models has region ETL you can check your self;
now you check on http://www.sammobile.com/firmwares/2/ your firmware for ETL region and you will find
Latest firmware info
GT-I9195 Galaxy S4 mini LTE
PDA: I9195XXUAMG8
CSC: I9195OXXAMG4
MODEM: I9195XXUAMG8
Added: 2013-08-15
downloaded and flashed to your mobile, good luck
Click to expand...
Click to collapse
Yes, I believe he is right, because you should remember it when the phone starts, it shows O2 carrier blue screen... if you do not remember that, you definitely do not have O2C... the same with T-Mobile version.
boot loop
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Diego009 said:
thanks for info , now i tried flashed with odin v3.07 in log odns: ok sucesfuly but after reboot phone
boot loop !
Click to expand...
Click to collapse
go to recovery, make full wipe data
przem00 said:
go to recovery, make full wipe data
Click to expand...
Click to collapse
its works thanks
Hello everyone, I just got my G960F/DS and it originally came with SIN CSC so being I am in Canada, I tried to load the UK firmware to try and get VoLTE and WiFi calling to work. I was able to on SIN CSC, to select BTU firmware from the phone app using the secret code, but stupid me didn't discover the one thread about to use XEU to get the WiFi calling option and now I am stuck on BTU CSC without the option to go to XEU. I read if you use ODIN to go on H3G and then use ODIN back to a OXM based ROM, that it will go by default to XEU, but for me it just kept the BTU CSC after the firmware was flashed.
Does anyone have any suggestions? As mentioned above, no secret codes on the phone app I read to access the CSC changer or the advanced phone info is currently working. I can't flash a custom ROM as I am on the 7 days wait so wondering if it would be best to wait the 7 days and just flash a custom TW ROM with the CSC I want?
Thanks.
You can't switch between XEU and BTU easily, if at all as they are MultiCSC and one contains the other, BTU contains XEU
Not sure why your phone would default to BTU if you were flashing XEU from a completely different CSC not included though unless your phone was originally BTU
Make sure you're using CSC and not HOME_CSC when you flash and remove the SIM for the flash
Flash back to SIN then to XEU using CSC in ODIN both times
*Detection* said:
You can't switch between XEU and BTU easily, if at all as they are MultiCSC and one contains the other, BTU contains XEU
Not sure why your phone would default to BTU if you were flashing XEU from a completely different CSC not included though unless your phone was originally BTU
Make sure you're using CSC and not HOME_CSC when you flash and remove the SIM for the flash
Flash back to SIN then to XEU using CSC in ODIN both times
Click to expand...
Click to collapse
Yeah the phone originally showed SIN as the product code for Singapore. When I got the phone, I did originally try flashing the G960FXXU1BRF8 BTU ROM with the CSC (not HOME_CSC) with ODIN, but after setting up the phone, the CSC stayed at SIN. The only way I was able to set it to BTU was using the phone secret code of '*#272*IMEI#*' which now being on BTU, that no longer works to switch to XEU. Is there any special steps I should be following to switch CSC's properly? I did the following so far to try and switch
- Flashed H3G BL, AP, CP, CSC using ODIN (kept default ODIN options with SIM card and SD Card removed)
- Let the ROM boot up and went back to Download mode to flash the OXM BL, AP, CP, CSC
- After the firmware was flashed in ODIN, booted into recovery mode to factory reset/wipe cache.
- Inserted SIM Card and SD Card and let the ROM boot which indicated BTU as active CSC and Product Code.
Hope these details help. Do you know if the SIN firmware is a non-OXM or is it part of the OXM-multi CSC?
Andrw0830 said:
Yeah the phone originally showed SIN as the product code for Singapore. When I got the phone, I did originally try flashing the G960FXXU1BRF8 BTU ROM with the CSC (not HOME_CSC) with ODIN, but after setting up the phone, the CSC stayed at SIN. The only way I was able to set it to BTU was using the phone secret code of '*#272*IMEI#*' which now being on BTU, that no longer works to switch to XEU. Is there any special steps I should be following to switch CSC's properly? I did the following so far to try and switch
- Flashed H3G BL, AP, CP, CSC using ODIN (kept default ODIN options with SIM card and SD Card removed)
- Let the ROM boot up and went back to Download mode to flash the OXM BL, AP, CP, CSC
- After the firmware was flashed in ODIN, booted into recovery mode to factory reset/wipe cache.
- Inserted SIM Card and SD Card and let the ROM boot which indicated BTU as active CSC and Product Code.
Hope these details help. Do you know if the SIN firmware is a non-OXM or is it part of the OXM-multi CSC?
Click to expand...
Click to collapse
You can check which CSCs are included in the one you are currently running using this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
OXM-multi CSC includes SIN so yea that'll be why it didn't change
OXM-multi CSC includes
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO
You'd have to flash to one not included first
(But make sure the bootloader version matches and is not higher than the one you want to flash back to or you'll be stuck)
Download mode > BL:x (x = version number)
Firmware BL version is here (G960FXXU1BRF8) << Version 1
*Detection* said:
You can check which CSCs are included in the one you are currently running using this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
OXM-multi CSC includes SIN so yea that'll be why it didn't change
OXM-multi CSC includes
ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PHE PHN ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFE XME XSG XSP XTC XXV ZTO
You'd have to flash to one not included first
(But make sure the bootloader version matches and is not higher than the one you want to flash back to or you'll be stuck)
Download mode > BL:x (x = version number)
Firmware BL version is here (G960FXXU1BRF8) << Version 1
Click to expand...
Click to collapse
Thanks for providing this. Do you know why when I flashed the H3G firmware which is a non-OXM CSC, why flashing to a OXM after, caused the Sales and Product Code to stay BTU? As described in my last post, I flashed the BL, AP, CP and CSC for H3G and it did boot, but I immediately shut off the phone and installed the OXM firmware after it did. Does my SIM Card have to be inserted during your steps? Lastly not sure if it's true but I read that whatever your product code is, the OXM CSC will apply that CSC during the first boot. So I have to find a way to change the Product Code without using the phone secret code since that no longer works on BTU firmware.
I usually do my research before doing anything like this to prevent issues and have installed custom ROMs, changed CSC since the S2 days, but this has me stumped.
Andrw0830 said:
Thanks for providing this. Do you know why when I flashed the H3G firmware which is a non-OXM CSC, why flashing to a OXM after, caused the Sales and Product Code to stay BTU? As described in my last post, I flashed the BL, AP, CP and CSC for H3G and it did boot, but I immediately shut off the phone and installed the OXM firmware after it did. Does my SIM Card have to be inserted during your steps? Lastly not sure if it's true but I read that whatever your product code is, the OXM CSC will apply that CSC during the first boot. So I have to find a way to change the Product Code without using the phone secret code since that no longer works on BTU firmware.
I usually do my research before doing anything like this to prevent issues and have installed custom ROMs, changed CSC since the S2 days, but this has me stumped.
Click to expand...
Click to collapse
If I had to guess, (if your phone is 2nd hand) then the original CSC was actually BTU and not SIN, SIN was flashed before it was sold
If that's not the case, then I'd guess that BTU always defaults from OXA Multi unless your CSC is included, which would mean you do not know your original CSC and SIN was still flashed before sale
Otherwise I have no idea, I haven't tried changing my CSC on the S9, I know with the S7 I had before this, the same problem occurred trying to switch between XEU and BTU, my S7 was XEU and refused to switch to BTU
SIM only needs to be removed for the initial flash and first boot from what I know, otherwise it can use the SIM to work out the original CSC
*Detection* said:
If I had to guess, (if your phone is 2nd hand) then the original CSC was actually BTU and not SIN, SIN was flashed before it was sold
If that's not the case, then I'd guess that BTU always defaults from OXA Multi unless your CSC is included, which would mean you do not know your original CSC and SIN was still flashed before sale
Otherwise I have no idea, I haven't tried changing my CSC on the S9, I know with the S7 I had before this, the same problem occurred trying to switch between XEU and BTU, my S7 was XEU and refused to switch to BTU
SIM only needs to be removed for the initial flash and first boot from what I know, otherwise it can use the SIM to work out the original CSC
Click to expand...
Click to collapse
Yeah I kind of figured. Phone was brand new and the Samsung seal wasn't broken but when I did boot it up for the first time, I didn't get the setup screen. I know with my S5 my product code was switched and even when flashing Canada's CSC, with my SIM installed, it would default to a different CSC then what I needed. The only way to change it was using the Phone's Secret code. It's a shame that it's not easier to change the product code so that the proper CSC is applied.
Does anyone who has the BTU product code have the same issue with the secret code not working? I am on the same version of ROM that I was on before my CSC got changed to BTU so I know it's not the ROM version. Every guide I found regarding flashing CSC has been to get to BTU not to get to XEU so anyone who can shed light on this? In the meantime, I will wait the 7 days for OEM Unlock to appear.
So I got the OEM unlock last night after 154 hours uptime but it was 7 days since signed into Samsung account and I did try XEU and INS CSC but no voLTE. Was wondering if anyone on Rogers or any of the Canadian carriers have gotten voLTE or wifi calling to work? In the past I know INS CSC did have voLTE for the s7 when it was a S8 port but so far trying INS, SIN, BTU, or XEU CSC hasn't worked. I am happy with RR AOSP right now, but wanted any suggestions as there must be one CSC that works.
Andrw0830 said:
So I got the OEM unlock last night after 154 hours uptime but it was 7 days since signed into Samsung account and I did try XEU and INS CSC but no voLTE. Was wondering if anyone on Rogers or any of the Canadian carriers have gotten voLTE or wifi calling to work? In the past I know INS CSC did have voLTE for the s7 when it was a S8 port but so far trying INS, SIN, BTU, or XEU CSC hasn't worked. I am happy with RR AOSP right now, but wanted any suggestions as there must be one CSC that works.
Click to expand...
Click to collapse
Hi Andrw0830,
Can you please advise how you did manage to change the CSC back as required to XEU? I also by mistake changed my CSC from STH to BTU via secret code and now the secret code is not working and I am stuck with BTU CSC. Does the OEM unlock has to do anything with it ? Appreciate your feedback ? Thanks
ksantoshh said:
Hi Andrw0830,
Can you please advise how you did manage to change the CSC back as required to XEU? I also by mistake changed my CSC from STH to BTU via secret code and now the secret code is not working and I am stuck with BTU CSC. Does the OEM unlock has to do anything with it ? Appreciate your feedback ? Thanks
Click to expand...
Click to collapse
I waited the 7 days to enable OEM unlock. Then I installed TWRP and installed the devbase ROM which has the choice to change the CSC. You do have to copy the options.prop that's included in the ROMs zip to your SD card before flashing the ROM. Then open up the file and there is a line for CSC, change it from KCSC to XEU. Save the file and install the ROM which will install the CSC you chose and the first boot will have it enabled.
Andrw0830 said:
I waited the 7 days to enable OEM unlock. Then I installed TWRP and installed the devbase ROM which has the choice to change the CSC. You do have to copy the options.prop that's included in the ROMs zip to your SD card before flashing the ROM. Then open up the file and there is a line for CSC, change it from KCSC to XEU. Save the file and install the ROM which will install the CSC you chose and the first boot will have it enabled.
Click to expand...
Click to collapse
Thanks a lot for your quick response and guidance. I was looking at options where I do not have to necessarily flash a custom ROM and somehow change the CSC. Nonetheless, can you please advise further if the KNOX count/warranty is void after you performed this flashing and is there a way to reset these counters ? Thanks again.
ksantoshh said:
Thanks a lot for your quick response and guidance. I was looking at options where I do not have to necessarily flash a custom ROM and somehow change the CSC. Nonetheless, can you please advise further if the KNOX count/warranty is void after you performed this flashing and is there a way to reset these counters ? Thanks again.
Click to expand...
Click to collapse
Unfortunately, once you flash a custom recovery, the KNOX is tripped and there is no way to reset.
ok thanks for your feedback. I will go and check with Samsung Service center
Thanks to Sammobile we have the new Android 9 Pie for Samsung Galaxy Tab S4 LTE (SM-T835) on XEF CSC.
https://www.sammobile.com/firmwares/galaxy-tab-s4/SM-T835/XEF/download/T835XXU2BSD1/266220/
Available via Samfirm or Frija.
Downloading............
Quick features after flashing via Odin:
- OneUI 1.1
- March, 2019 security patch
- Dark Mode in Settings
- Digital Wellbeing
Available CSC codes on firmware:
ATO, AUT, BGL, BTU, CAC, CAU, CPW, DBT, EUR, ITV, LUX, NEE, PHE, PHN, ROM, SEB, SEE, SEK, SKZ, TPH, XEF, XEH, XEO, XEZ, XSK
how to flash with odin? can i use this firmware if i am using indian tab s4?
omarhasan96 said:
how to flash with odin? can i use this firmware if i am using indian tab s4?
Click to expand...
Click to collapse
You may use this firmware if your Samsung Galaxy Tab S4 is the LTE version with model number SM-T835.
You can download this firmware with Frija: https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
Model: SM-T835
CSC: XEF
Auto
Press Check firmware
Press Download
Unzip file downloaded
Flash with Odin 3.13.1: https://forum.xda-developers.com/galaxy-s8+/how-to/odin-available-3-13-1-oreo-fws-t3755957
Open Odin 3.13.1
Fill the gaps:
BL: BL_T835XXU2BSD1_CL15659493_QB23020316_REV00_user_low_ship_MULTI_CERT.tar.md5
AP: AP_T835XXU2BSD1_CL15659493_QB23020316_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
CP: CP_T835XXU2BSD1_CP12343989_CL15659493_QB23020316_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC: HOME_CSC_OMC_OXM_T835OXM2BSD1_CL15659493_QB23020316_REV00_user_low_ship_MULTI_CERT.tar.md5
Power off your Tab S4
Push at the same time Volume+ and Volume- buttons
With both buttons pressed connect your tablet to your PC via USB cable, a green screen will appear, now you can stop pressing the buttons
Press Volume+ to enter download mode
And then press Start on Odin to start flashing
In 4-5 minutes your tablet will restart and you may disconnect it from your PC so it begins the Pie update
Thqnku for your quick reply but I cant download firmware from Sam mobile or Frija can you if possible provide me mirror link for the files.
omarhasan96 said:
Thqnku for your quick reply but I cant download firmware from Sam mobile or Frija can you if possible provide me mirror link for the files.
Click to expand...
Click to collapse
For Fast downloading read the first post.... Use the Samfirm or Frija application
https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
omarhasan96 said:
how to flash with odin? can i use this firmware if i am using indian tab s4?
Click to expand...
Click to collapse
if you flash non Indian roms , you will lose native VOLTE calling function.
I wouldn't mind using it, I have the Wi-Fi version so what an effect me. But it probably won't work I have the SM-T830.
Any screenshots?
can i use it with SM-T830 model (WIFI only) ?
toxotis70 said:
can i use it with SM-T830 model (WIFI only) ?
Click to expand...
Click to collapse
No
Will I still get OTA updates in the future if I flash this region's firmware and will I lose any data
hey all- any reports on whether something like Swift Installer will work on Pie? it does on my Pie on Note 9 but i know it doesn't on the S10.
jaidev.s said:
if you flash non Indian roms , you will lose native VOLTE calling function.
Click to expand...
Click to collapse
Probably not, this should be a multi CSC ROM, so unless he change his CSC manually, he will stay on INS (India) CSC
salahmed said:
Probably not, this should be a multi CSC ROM, so unless he change his CSC manually, he will stay on INS (India) CSC
Click to expand...
Click to collapse
Indian CSC (INU or INS) is not available in the French firmware. So when we flash CSC, it'll change the default CSC to French. This hap to me when I flashed French Oreo rom on my tab. I had to revert back to Indian rom to get the VOLTE call feature back.
Please excuse me if I'm wrong.
üdv.ez a rom jó sm-t835c?
welcome to rom good sm-t835c?
Can someone please share the boot image for this ROM? I'd like to root it using this method here: https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454 (rooting without recovery) because trying to flash the TWRP recovery that we currently have failed. Thanks
jaidev.s said:
Indian CSC (INU or INS) is not available in the French firmware. So when we flash CSC, it'll change the default CSC to French. This hap to me when I flashed French Oreo rom on my tab. I had to revert back to Indian rom to get the VOLTE call feature back.
Please excuse me if I'm wrong.
Click to expand...
Click to collapse
I am not sure if the French ROM is multi CSC, if it is, it should include the INS CSC, I flashed my Note 9 with Indian firmware but it was multi CSC, and my phone still have the MID CSC not changed
I didn't have the time to flash my tab yet, I'll do it soon and report if my CSC changed
Flashed my tab, CSC have been changed to XEF but I am using it without a Sim card, I used the home CSC so my data stayed intact without wipe (for testing because I factory reset it manually to avoid bugs)
If you've upgrade can someone see if you are able to downgrade back to Oreo? I am happy with the Oreo rom and hate when they make it so you can flash a lower build incase the new one is not up to par. Its odd that the French version is up before the Korean international version.
jaidev.s said:
Indian CSC (INU or INS) is not available in the French firmware. So when we flash CSC, it'll change the default CSC to French. This hap to me when I flashed French Oreo rom on my tab. I had to revert back to Indian rom to get the VOLTE call feature back.
Please excuse me if I'm wrong.
Click to expand...
Click to collapse
does Indian tab S4 and US tab S4 feature same Specification ??
Please reply. As i have come to India and having this tab, using with jio but not getting volte, so can i flash Indian ROM on my tab.
Hello community!
I recently bought a Samsung Galaxy S20+ (SM-G985F) which is carrier branded and sim locked. I am looking to remove the carrier branding by using a unbranded firmware. I am trying to find an unbranded firmware that will not affect the functionalities of the phone ( VoLTE, VoWiFi etc..) . Would this be done by finding a firmware with same PDA but different CSC?
Current Branded Firmware:
Version G985FXXU3ATG4 / G985FOWA3ATG4 / G985FXXU3ATG4
Product Code: PGU
Would this firmware work?
Product code LUX
PDA G985FXXU3ATG4
CSC G985FOXM3ATG9
Thanks in advance for your help!
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
yakapa40 said:
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
Click to expand...
Click to collapse
@yakapa40, thank you! This information is very helpful. I do have a Claro Guatemalan sim and even though the carrier does not support VoLTE, or VoWifi, I would like to keep this features in case they implement them in the future. I did find a firmware with the recommended PDA and CSC (Country South East Europe, Product code: SEE, PDA: G985FXXU3ATG4, CSS: G985FOXM3ATG9). Would this firmware work? From what understand, I would have to first flash this firmware, then change de CSC with Samkey to GTO and lastly, factory restore the phone. Is this correct?
Also, would you recommend using Samkey to perform a carrier unlock before changing the CSC or could I do it later on? I read that Samkey only works for phones that dont ask for unlock code. Mine does ask for a code when I insert another carrier's sim.
Thanks in advance for your help!
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
yakapa40 said:
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
Click to expand...
Click to collapse
@yakapa40, Thank you once again. Just want to make sure that the firmware mention before is the best one to use? I have attached the software information from my phone. Please let me know your opinion.
yes all is ok with your firmware
PGU:
GTO:
yakapa40 said:
yes all is ok with your firmware
PGU:
GTO:
Click to expand...
Click to collapse
@yakapa40 Thank you for your help. You are extremely knowledgeable on this topic! To be honest, I just realize how little I know about flashing even though I've been doing it since 2012. I feel like I understand firmware flashing less than I did before.
I just have a last question. If I flash the firmware with a CSC NEE, and than do the CSC change to GTO, which CSC will be used for future OTA updates? What I mean is, if there is a new NEE firmware will I get it, or will I have to wait for a new GTO update? Sorry, I am little confused with all of this.
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
yakapa40 said:
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
Click to expand...
Click to collapse
@yakapa40, I was finally able to flash the phone. I followed the steps and got the GTO CSC and the unbranded firmware working! Thank you for helping me throughout the whole process. The only down side was that I still lost the VoLTE and VoWifi options. When I look at the Sim Card Status menu, the IMS registration Status is "not registered". :crying:
Hi, sorry my question,
I want to change csc, for example my phone is S20+ 5G G986B (European), if I use Odin and flash AP, BL, CP from G986B (European), and I use only CSC file from G986O (China) is it possible?
Note: European version is (Exynos) and China i think is (Snapdragon)
Thanx
PeterParker said:
Hi, sorry my question,
I want to change csc, for example my phone is S20+ 5G G986B (European), if I use Odin and flash AP, BL, CP from G986B (European), and I use only CSC file from G986O (China) is it possible?
Note: European version is (Exynos) and China i think is (Snapdragon)
Thanx
Click to expand...
Click to collapse
No, it won't work on your Exynos device.