Hello,,
After a long term of tries and workarounds. Finally found some module by ender-zhao
Thanks for him so much.
Simply one module to enable 5G and Volte ,vowifi...
install it from magisk , restart and everything should be fine. 5G,VOLTE
Here is the module
Download Here
Good luck and thanks for ender-zhao
This module works on Pixel 5 , Pixel 4a (5G)
Thanks Again and Good luck
The problem is we are getting unknown calls
Has anyone fixed it in the module?
I managed to fix it by replacing ims files
Eiad Ajam said:
The problem is we are getting unknown calls
Has anyone fixed it in the module?
I managed to fix it by replacing ims files
Click to expand...
Click to collapse
possible its fixed , I tried it and didn't face any issue.
Eiad Ajam said:
The problem is we are getting unknown calls
Has anyone fixed it in the module?
I managed to fix it by replacing ims files
Click to expand...
Click to collapse
What exactly did you do ?
Wow this ****ed my phone I have no service now
nfqa said:
Hello,,
After a long term of tries and workarounds. Finally found some module by ender-zhao
Thanks for him so much.
Simply one module to enable 5G and Volte ,vowifi...
install it from magisk , restart and everything should be fine. 5G,VOLTE
Here is the module
Download Here
Good luck and thanks for ender-zhao
This module works on Pixel 5 , Pixel 4a (5G)
Thanks Again and Good luck
Click to expand...
Click to collapse
Seriously need help
rbouza1 said:
Wow this ****ed my phone I have no service now
Click to expand...
Click to collapse
So if anyone has problems , clear cache on carrier services all the carrier apps and reboot. I didn't have any mobile data or service. Scary stuff
Works for me. Tnx.
Eiad Ajam said:
The problem is we are getting unknown calls
Has anyone fixed it in the module?
I managed to fix it by replacing ims files
Click to expand...
Click to collapse
May i know how do replace the IMS file? Thanks.
Ok here's my guide. I think it's best we don't start another 5G/Volte thread so maybe laughterwym can reference this post in the first post of this thread.
Download EfsTools modded and extract.
Put the correct mcfg_sw.mbn in the EfsTools folder. Download the mcfg_autoselect_by_uim file and also put it in the EfsTools folder.
Flash the Volte module in Magisk (doesn't really matter wheter your mbn is in it, as long as it has the right system props and more important disables the qril stuff that) (Both this module and this module are working for me. You can also find the modded module I used here. I'n my modded module I set the 5G connection to NSA so use that one if your carrier doesn't support SA yet.
Connect your phone to your computer with usb debuggin on in your developer settings. Make sure you have both qualcomm drivers and google usb drivers and of course the latest platform tools (and add the dir to your system path).
Use the workaround we normaly use to connect our phone to qpst:
Code:
adb shell
su
resetprop ro.bootmode usbradio
resetprop ro.build.type userdebug
setprop sys.usb.config diag,diag_mdm,adb
diag_mdlog
cancel (ctrl+c) once it starts to "hang" at failed to open diag socket
change usb config (file transfer, no file transfer)
Open a command prompt in the extracted efstools folder
Run the following command
Code:
EfsTools.exe efsInfo
You will get errors because of the hacky workaround we have to do with Pixel phones to use them with efs software. In my case everything worked like a charm. You can check efs explorer after writing your mbn to see if it looks allright.
Run the following commands one by one:
Code:
EfsTools.exe writeFile -i mcfg_autoselect_by_uim -o /nv/item_files/mcfg/mcfg_autoselect_by_uim
EfsTools.exe writeFile -i mcfg_autoselect_by_uim -o /nv/item_files/mcfg/mcfg_autoselect_by_uim -s 1
EfsTools.exe uploadDirectory -i mcfg_sw.mbn -o / -v
EfsTools.exe uploadDirectory -i mcfg_sw.mbn -o / -s 1
The -s 1 options are there so we write configurations for the second sim slot.
Important note: If you have a carrier that uses NR-NSA you'll have to edit lte_feature_restrictions.xml in EFS explorer to get everything right. I've uploaded the file here. If your mcc isn't in the following list you'll have to add it;
Code:
<plmn_list name="dss_plmns" ns="global">
228-01 505-01 505-11 505-39 505-71 505-72 204-04 204-08 204-69 204-12 262-02 204-16 204-20 232-03 232-04 232-07
</plmn_list>
Your VoLTE, VoWiFi, ims settings and 5g should be working now! Some carriers have very short carrierpolicy.xml, mine only says dds is enabled. Keep that in mind when you use apps to monitor your connection. 5G is working on my phone but I see empty rat stuff. Currently I'm writing code for changing lte_faeture_ca.xml to add all the information other Carriers have on the phone. Once you start tweaking it's hard to stop right?
Please share your findings! I'll update this post when I remember something usefull so your feedback is very helpfull!
expos said:
May i know how do replace the IMS file? Thanks.
Click to expand...
Click to collapse
Check this thread
Module to enable 5G/VoLTE/VoWIFI on Pixel4a 5G/Pixel5
Update (9 Oct 2022): Upload module here. Update (7 Apr 2021): If you are looking for the manual way to add 5G support besides the magisk module way or the module does not work for you. Please refer to #54 for the detailed steps. Thanks again to...
forum.xda-developers.com
Hi! Can confirm that @Kars88 's steps are working... Luckily, I am on cerrier which was officially added in March update, but only VoLTE, no VoWiFi... With this steps I am able to use VoWiFi too
If will somebody needs, here are mbns from Nokia 8.3, they are working with our pixel too
somin.n said:
Hi! Can confirm that @Kars88 's steps are working... Luckily, I am on cerrier which was officially added in March update, but only VoLTE, no VoWiFi... With this steps I am able to use VoWiFi too
If will somebody needs, here are mbns from Nokia 8.3, they are working with our pixel too
Click to expand...
Click to collapse
Ah thanks for sharing the mbn files and nice to hear it's working for you! Seems like the Nokia mbn is different from the one I used so new stuff to explore!
I've added your mbn collection to the google drive I'm revering to to stack everything in the same place.
Still not getting any 5G connections. On Google Fi using US Cellular towers and the map shows coverage in my area. On Proton rom with the Proton kernel. I'm in Illinois USA. Am I missing something?
EDIT: Nvm just did some research and I guess 5g is only supported by T-Mobile which sucks in my area. Bummer.
The download link showed "Not found".
Could you drop a google drive download link here ?
Hi there, my pixel 5 is now on Android 12. Will the module work with Android 12 or strictly for Android 11? thx!
acheng said:
Hi there, my pixel 5 is now on Android 12. Will the module work with Android 12 or strictly for Android 11? thx!
Click to expand...
Click to collapse
Hi, based on my experience on 4a5g Android 12 (Stock and ProtonAOSP), the module will work to at least enable the VOLTE/VOWIFI switches. To really fully enable them, follow instruction
https://forum.xda-developers.com/t/finally-one-module-unlock-5g-volte-vowifi.4240547/post-84648477
creezalird said:
Hi, based on my experience on 4a5g Android 12 (Stock and ProtonAOSP), the module will work to at least enable the VOLTE/VOWIFI switches. To really fully enable them, follow instruction
https://forum.xda-developers.com/t/finally-one-module-unlock-5g-volte-vowifi.4240547/post-84648477
Click to expand...
Click to collapse
Many thx! will try out.
Just curious.. will this enable 5g C-band? N77/78 for instance?
The Pixel 4a 5g and the Pixel 5 have the hardware/modem to use N77/n78. However, only the Pixel 5 has received the necessary software update to enable it.
I'm dying to access this band, and the 500mb-1.0gig speeds it offers.
And I'm at a loss for how to enable the bands on the 4a5g.
I'm just curious, would flashing the updated radio.img do the trick? Or would your module help me?
Any help would be greatly appreciated.
As of now, I can get 5g, but it's the lower bands.. a fast extension of the existing LTE network. I can download at around 100-150mbps on average, with random runs at over 200mbps.
However, with C-band going nationwide last week, I've got friends who are pulling 1gig speeds on their iphone 13's using C-band.
Considering that I use my phone as a hotspot for my laptop, fire stick, and smart TV... The difference between 100mbps and 1000mbps is quite noticable.
Thanks for your guidance.
Related
I want to port/build IMS Manager for getting VoLTE feature on klte (LineageOS 14.1) but there is no guide on XDA, YouTube or even on google search... There are even VoLTE patches for Mi, Moto and Yu devices. Please help me to build it as I don't even know where to start after getting sources... Thanks in advance! ?
Update:
Found VoLTE rom for S5 (snapdragon variants) https://forum.xda-developers.com/galaxy-s5/development/rom-s7ux-pure-stock-t3505699
So you are aware IMS manager is that, a Manager, it doesn't effect your IMS functionality. Furthermore, LineageOS doesn't currently have native VoLTE functionality afaik. IMS manager is a samsung app for the samsung system, you'd better bug the Lineage Dev's for a tool for manipulating the IMS settings in LineageOS and more so bug them to implement VoLTE, however this comes at a risk as it can interfere with 911 Functionality and as such could pose libaility they wish to not deal with
Pls help him, I need VoLTE, too
If you need another similar to stock android 32 bit chip set ROM with ims manager, I could suggest you download wind7 ls 5016 firmware(snapdragon 210 with marshmallow). It might help you. Please try.
kvsjxd said:
I want to port/build IMS Manager for getting VoLTE feature on klte (LineageOS 14.1) but there is no guide on XDA, YouTube or even on google search... There are even VoLTE patches for Mi, Moto and Yu devices. Please help me to build it as I don't even know where to start after getting sources... Thanks in advance!
Click to expand...
Click to collapse
Bro you saw my above comment?
Have you made any progress on this? I've had a look at this in latest lineageos and on Galaxy s6. Though I think the basic idea is the same. The ImsManager is part of lineageos Rom. Though it needs a ims service. If that is not available even if you enable volte or WiFi calling over build.properties it will not work.
So to my (limited) knowledge, the first thing one would have to do is provide an implementation of that service. I think in Stock Galaxy s6 that is provided in imsservice.apk that comes in /system/priv-apps. I've attached the version of stock s6. Though I'm unable to use that since it's signature is not accepted and I'm neither able to decompile nor to resign /zipalign the package.
Any ideas? Or is this an all wrong way I'm following?
Br
Johannes
orgler said:
Have you made any progress on this? I've had a look at this in latest lineageos and on Galaxy s6. Though I think the basic idea is the same. The ImsManager is part of lineageos Rom. Though it needs a ims service. If that is not available even if you enable volte or WiFi calling over build.properties it will not work.
So to my (limited) knowledge, the first thing one would have to do is provide an implementation of that service. I think in Stock Galaxy s6 that is provided in imsservice.apk that comes in /system/priv-apps. I've attached the version of stock s6. Though I'm unable to use that since it's signature is not accepted and I'm neither able to decompile nor to resign /zipalign the package.
Any ideas? Or is this an all wrong way I'm following?
Br
Johannes
Click to expand...
Click to collapse
Some more ideas I've tested are described over there :
https://forum.xda-developers.com/galaxy-s6/orig-development/rom-lineageos-14-1-t3598775/post72465060
Found VoLTE rom for S5 (snapdragon variants) https://forum.xda-developers.com/galaxy-s5/development/rom-s7ux-pure-stock-t3505699
kvsjxd said:
Found VoLTE rom for S5 (snapdragon variants) https://forum.xda-developers.com/galaxy-s5/development/rom-s7ux-pure-stock-t3505699
Click to expand...
Click to collapse
Explain please.
西村大一 said:
Explain please.
Click to expand...
Click to collapse
I didn't had to port IMS Manager to lineageos or any rom. And instead I tested the above specified rom, it's for SM-G900F but I flashed it on SM-G900W8 and SM-G900T. After flashing and booting up for the first time, I got VoLTE running on both devices without even changing a setting. Keep in mind that the rom have 3 bugs, SystemUI crashes when you get a notification from WhatsApp, You cannot disable the lockscreen, If you change lockscreen from swipe to something else and lock the screen, you won't be able to unlock the device. Then you'll need to factory reset/flash the rom again or have to manually remove lock using TWRP. I am switching to a different operator next week, I am tired of the battle for VoLTE. Hope it helps.
@TheMadScientist Please close this thread.
Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator
Disclaimer:
* You flash this ROM at your own risk and responsibility.
* This ROM is provided without ANY WARRANTY WHATSOEVER, not even the warranty that it works.
* None of the developers of this ROM will be held accountable for any damages, complaints or anything.
This rom is pre pre pre pre alpha, almost nothing is working! Just for everybody who want see Oreo look. I'm out of free time but I will update each time when I get some free time. Whats working, whats not working...etc? You tell me! You fix something, you tell me! You found something, you tell me! Adb somehow is not working, you need to change ro.build.type from userdebug to eng and adb will start working. If you have idea about whats going on with adb, you tell me! Somehow managed to boot this rom, a lot of work and time I spent to get Oreo boot, got also credentials working but somehow camera is fail to work, probably we must use Snap camera instead of the Camera2? You can try snap camera and tell me. You can try other cameras too and tell me!
Enjoy!
Source code && how to build:
https://forum.xda-developers.com/showpost.php?p=74724831&postcount=1008
Download:
https://mega.nz/#!ZB4ilbrL!nI_YV54IMBmKpA1BE4L9VYcwm3nsuLXAGKOu35NJdyQ
Can you post some screenshoots? Whats working? Whats not working? Etc? I'm so lazy
risk
while it is very risky to put this firmware.
munjeni said:
Can you post some screenshoots I'm so lazy Whats working? Whats not working? Etc?
Click to expand...
Click to collapse
Not a risky, just some more things is not working! Bugs need to be identified and fixed one by one.
Mobile data and camera are not working.
Viktor245 said:
Mobile data and camera are not working.
Click to expand...
Click to collapse
Wifi ok?
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Do not have the opportunity to check it out.
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Wifi can't be opened
Waoo, I changed my phone, now I can use my z1c to test all lol
In the afternoon I'm going to install it!
i will wait for working mobile data and wifi build
omkarmahananda said:
i will wait for working mobile data and wifi build
Click to expand...
Click to collapse
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
munjeni said:
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
Click to expand...
Click to collapse
actually i have no idea how this thing work.
but can you help learning ?!
any thread or any website or anything?
thank you
Did you have think include magisk for this version?
Sorry for being late:
Audio doesn't work
Wifi doesn't work
I'm not able to test cell data
Camera doesn't work, neither footej
ADB doesn't work, no usb at all, the device isn't listed neither with adb devices and devices control panel in windows
Bluetooth yes
Vibrating yes
@hackintosh5 here
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
115ek said:
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
Click to expand...
Click to collapse
But ADB works to you? Can you see the phone if you do adb devices?
@munjeni can I try to replace the libs just like as porting a custom rom from the N builds? Or it is wasted time?
-totonio- said:
But ADB works to you? Can you see the phone if you do adb devices?
Click to expand...
Click to collapse
Yes, adb works. But only if you revert this commit https://github.com/munjeni/android_device_sony_amami/commit/e0cde4386d51ad2b45d7700f495a85fdb75dc8d2.
Adb from the 8.0 tree seems to be broken, but maybe it's a problem with our devicetree.
Nevertheles, as Munjeni already did, replacing the adbd with a prebuilt one (I used one from an Android 7 tree i had lying around) works quite fine.
@munjeni : Is adb built from 8.0 source working for you? Or is it a permission problem?
Hey. I've got some news. Wifi was working for me. I just installed a new build and was able to connect
I can't test data connection - the sim reader is broken in my test device.
I think we should move ahead to lineage 15.1 (android 8.1) because support for lineage 15.0 was already dropped.
Unfortunately there are several build issues - let's see what the time brings.
*Edit: adb is fixed now
Booted 15.1 some minutes ago.
Working
adb
MTP
brightness slider
not working
wifi
automatic brightness
audio
camera
LEDs
everything else...
I've tried all treble pie roms and in all are the same problem with Bluetooth in call sound. First I thougt it's a problem with my elephone u pro, but in the meanwhile I've recognized that the same problem exist in many phones.
I'll hope that we can support the developers with a payment if they fix this problem.
I am willing to pay up to 50$ if someone is able to fix this problem for the elephone u pro.
If there's someone else who wants to get the problem solved then please write here your payment offer.
But it would be a shame if people make an offer here and do not stick to it later.
Root first, then go to Vendor/Overlay/BluetoothResCommon.apk
delete it,then reboot,
a05haiji28 said:
Root first, then go to Vendor/Overlay/BluetoothResCommon.apk
delete it,then reboot,
Click to expand...
Click to collapse
I'll try in the bext days....
a05haiji28 said:
Root first, then go to Vendor/Overlay/BluetoothResCommon.apk
delete it,then reboot,
Click to expand...
Click to collapse
Hi, I've tried today but in my elephone u pro there isn't a Vendor/Overlay/BluetoothResCommon.apk
Other ideas?
Laptapper said:
I've tried all treble pie roms and in all are the same problem with Bluetooth in call sound. First I thougt it's a problem with my elephone u pro, but in the meanwhile I've recognized that the same problem exist in many phones.
I'll hope that we can support the developers with a payment if they fix this problem.
I am willing to pay up to 50$ if someone is able to fix this problem for the elephone u pro.
If there's someone else who wants to get the problem solved then please write here your payment offer.
But it would be a shame if people make an offer here and do not stick to it later.
Click to expand...
Click to collapse
1. You have to extract stock /vendor/etc/audio/audio_policy_configuration.xml and delete A2DP related section like this:
https://github.com/PixelExperience-...mmit/977444af69f10fc135d07e19f1e5f1183e73e9ff
then replace it (by root explorer or creating magisk module).
2. You also need to change /system/bin/rw-system.sh.
Please delete
Code:
mount -o bind /mnt/phh/empty_dir /vendor/etc/audio || true
and save.
NOTE: This works only on CAF based custom roms. It doesn't work on AOSP.
AndroPlus said:
You have to extract stock /vendor/etc/audio/audio_policy_configuration.xml and delete A2DP related section like this:
https://github.com/PixelExperience-...mmit/977444af69f10fc135d07e19f1e5f1183e73e9ff
then replace it (by root explorer or creating magisk module).
Click to expand...
Click to collapse
Hi
I've tried, but the changed and saved file
/vendor/etc/audio/audio_policy_configuration.xml
will be automatically deleted at restart.
The folder is empty after restart.
Any ideas?
Laptapper said:
Hi
I've tried, but the changed and saved file
/vendor/etc/audio/audio_policy_configuration.xml
will be automatically deleted at restart.
The folder is empty after restart.
Any ideas?
Click to expand...
Click to collapse
Oops, you also need to change /system/bin/rw-system.sh.
Please delete
Code:
mount -o bind /mnt/phh/empty_dir /vendor/etc/audio || true
and save.
AndroPlus said:
Oops, you also need to change /system/bin/rw-system.sh.
Please delete
Code:
mount -o bind /mnt/phh/empty_dir /vendor/etc/audio || true
and save.
Click to expand...
Click to collapse
Great job! Bluetooth In call is working.
I'll think it's not your development but for your know how to, I've send you 15 Euro.
Do you know also how to get Bluetooth audio music working?
By any chance did you get fully functional Bluetooth on the gsi rom or anyone else?
[email protected] said:
By any chance did you get fully functional Bluetooth on the gsi rom or anyone else?
Click to expand...
Click to collapse
I'll hope so.
@AndroPlus has already fixed in call and may be he's on the way to solve audio also.
Has it been rectified in all builds
so is it safe to say that we can install the latest version of GSI provided by rom providers made in and released in march.
I would like to know that before i go ahead and transition over from stock to custom rom... mainly called PixelDust Pie rom version march
Laptapper said:
Great job! Bluetooth In call is working.
I'll think it's not your development but for your know how to, I've send you 15 Euro.
Do you know also how to get Bluetooth audio music working?
Click to expand...
Click to collapse
Thank you, but BT music works fine on my phone (Mi 9).
I don't know how to fix it...
[email protected] said:
so is it safe to say that we can install the latest version of GSI provided by rom providers made in and released in march.
I would like to know that before i go ahead and transition over from stock to custom rom... mainly called PixelDust Pie rom version march
Click to expand...
Click to collapse
No, the fix needs device specific path and not all GSI has it.
I have the Razer Phone and have got either audio working or in call but never both... I am in the process of going through both audio routing files and see if I can combine them to get it to work, but I haven't messed with Android in years so it's taking more time than I anticipated to get caught up on all the changes you guys have made. The last time I built a rom was when treble was just on the discussion table. It really amazes me this bug has gone on this long, but maybe there's more to it than I'm seeing so far. I have seen some good devs working on this.
Enlighten me Please
AndroPlus said:
Thank you, but BT music works fine on my phone (Mi 9).
I don't know how to fix it...
No, the fix needs device specific path and not all GSI has it.
Click to expand...
Click to collapse
Hey @AndroPlus , could you possibly explain how to go about it. I would appreciate the help. I have got a nokia 7 plus with pixel dust pie rom on latest version running. Where and what do i need to do to get it up and running on my phone. I need to get in call bluetooth running. Thats the only thing stopping me from using this amazing blazing rom
Bluetooth music also does not work with me. However bluetooth calls work, so its weird that music/audio is not working.
Bluetooth music also does not work for me, but bluetooth calls work fine. I'm using Arrow GSI with Mi Mix 3.
Laptapper said:
Great job! Bluetooth In call is working.
I'll think it's not your development but for your know how to, I've send you 15 Euro.
Do you know also how to get Bluetooth audio music working?
Click to expand...
Click to collapse
That's on my AOSP ROM?
phhusson said:
That's on my AOSP ROM?
Click to expand...
Click to collapse
It's on resurrection remix pie, also headset over usb c is working. Only audio sound over Bluetooth is a problem. Do you've got a solution ir an idea what should I can try?
Btw do you have any idea how to control the led colours?
i still have no bluetooth calling on Mi Mix 3 on the @AndroPlus rom's so his solution definitely doesn't work for all devices.
furthermore there is still a bounty to get bluetooth working perfectly on vanilla android gsi's
AndroPlus said:
Oops, you also need to change /system/bin/rw-system.sh.
Please delete
Code:
mount -o bind /mnt/phh/empty_dir /vendor/etc/audio || true
and save.
Click to expand...
Click to collapse
Thank you sooo much! That´s all, I needed to do to fix my incall audio problem!
No changes in audio_policy.xml were needed - only removing this line from rw-system.sh
Hello everyone, just share an easy module to enable nfc-sim on 6T OOS 10 Hope can help someone NEED IT.
I will not answer about what is NFC-SIM question, PLEASE DO SOME RESEARCH!
Requirements
NFC-SIM (already activated)
Oneplus 6T
OxygenOS 10
Magisk 19+
※May work on another Oneplus device, you can try it and leave a comment ((I'm not responsible for bricked devices)) !! ※
Instruction
Flash The Module via Magisk and Reboot.
Re-Enable NFC Toggle. (make sure system reload the config)
Already Tested
CHT NFC-SIM Card
EasyCard
Stock Stable OOS 10.3.1
Convenience Store POS and Kiosk
Bus、MRT、Train
Issue
- None
Daily Use (2020/02/20)
Changelog
v1.0
-> First Release
v1.1
-> Update New Magisk Binary
-> Update NFC config file to match OOS 10.3.1 and modify
Source Code
Github
Credits
topjohnwu Awesome Magisk !
shakalaca Make NFC-SIM work on 6T OOS 9.X, if you need it go check out his Github !
no luck on my oneplus 7t
zyu0090 said:
no luck on my oneplus 7t
Click to expand...
Click to collapse
Sorry, but I don't have 7t can be test or extract system files I need
timlu85 said:
Sorry, but I don't have 7t can be test or extract system files I need
Click to expand...
Click to collapse
after enable the module, is there any settings to be done?
zyu0090 said:
after enable the module, is there any settings to be done?
Click to expand...
Click to collapse
I didn't change anything about NFC in settings
-
This module is only working for who have already setup the nfc-sim, cause the API reason the carriers application can't read nfc-sim so can't do first time setup.
is this gonna be working on pie?
jlan007 said:
is this gonna be working on pie?
Click to expand...
Click to collapse
Hi, this module only works on OOS 10, Pie version need to add OpenMobileAPI, SmartcardService etc.
You can check out this one on Github !
Already tested on new OOS 10.0.1 !!
working good
I'm sorry, but I'm slow, what exactly is NFC SIM? What does it do, and why is it needed?
rmendez011 said:
I'm sorry, but I'm slow, what exactly is NFC SIM? What does it do, and why is it needed?
Click to expand...
Click to collapse
In short, make sim card to be an bus card or E-ticket then via the NFC antenna to induction. this module is modify config file make this function work, if you want to use NFC-SIM please ask your telecom did they have this services.
timlu85 said:
In short, make sim card to be an bus card or E-ticket then via the NFC antenna to induction. this module is modify config file make this function work, if you want to use NFC-SIM please ask your telecom did they have this services.
Click to expand...
Click to collapse
But we already have NFC and can do those things so what's the point? I have Verizon and supposedly the sims they use are NFC sims but I have no idea.
Great!!!!!
It's also work on Oneplus 7
Thanks......
What is NFC-SIM?
Hello. What files do you need to check is it available for OnePlus 7 Pro? If you dont mind and have time for that im happy to help you to provide this amazing option work for 7 pro. Best regards and thanks a lot!
rmendez011 said:
But we already have NFC and can do those things so what's the point? I have Verizon and supposedly the sims they use are NFC sims but I have no idea.
Click to expand...
Click to collapse
Hmm I think you can ask Verizon, if I have nfc-sim what can I use !?
In Taiwan we use nfc-sim to replace EasyCard (Physical Card) to take public transport or convenience store payment. NFC-SIM is an old technology just for transition, we are waiting can use Google Pay or another payment to take public transport.
yot2703 said:
What is NFC-SIM?
Click to expand...
Click to collapse
timlu85 said:
In short, make sim card to be an bus card or E-ticket then via the NFC antenna to induction. this module is modify config file make this function work, if you want to use NFC-SIM please ask your telecom did they have this services.
Click to expand...
Click to collapse
Old commit can give you answer
p0six said:
Hello. What files do you need to check is it available for OnePlus 7 Pro? If you dont mind and have time for that im happy to help you to provide this amazing option work for 7 pro. Best regards and thanks a lot!
Click to expand...
Click to collapse
Hi, since payload dumper can work on Android 10 I can easily access to system partition to get files I needed, But in my research 5T (Android 9)、7 Pro、7T seems not config problem. For now I'm working on make 5T can use nfc-sim, if I have any progress or test file I will contact you, Thank You
Since the discontinuation of the poorly-named Isis Mobile Wallet (later renamed Softcard) in 2013 there are no active NFC-SIM services on any of the carriers in the United States. So, while your Verzion, AT&T, or T-Mobile SIM card may support NFC-SIM, there is no use for it. I am also not aware of any NFC-SIM services in Canada. So if you live in either of those areas this tweak isn't of any use.
What is the purpose for this module? I'm not sure why I would need it. What benefits would I get by installing this?
doesnt work with my 7 pro on OOS 10.3.0 for now (
Hi, I did some experiments with the GSI PIXEL EXPERIENCE ALPHA that might interest some developers.
It works properly as is on nairo (moto g 5g plus) except for a few things.
- TWRP recovery gets broken, i think we need a newer version for this phone to work with android 12.
- The audio doesn't get routed in any way (i've tried with apps) to the aux output (headset).
I would take care of this problems if i had knowledge, if anyone can help it's welcome for sure, thanks in advance!
Tommy0000 said:
Hi, I did some experiments with the GSI PIXEL EXPERIENCE ALPHA that might interest some developers.
It works properly as is on nairo (moto g 5g plus) except for a few things.
- TWRP recovery gets broken, i think we need a newer version for this phone to work with android 12.
- The audio doesn't get routed in any way (i've tried with apps) to the aux output (headset).
I would take care of this problems if i had knowledge, if anyone can help it's welcome for sure, thanks in advance!
Click to expand...
Click to collapse
1 share the gsi twrp is broken for even on a android 11 gsi as for audio
1. Go to developer options, find something like "Disable A2DP offload", turn it on and restart your device.
2. After the restart head back to settings, head to Phh Treble settings, then misc and enable "Force headphone switch" and
wesleyvanneck12345678 said:
1 share the gsi twrp is broken for even on a android 11 gsi as for audio
1. Go to developer options, find something like "Disable A2DP offload", turn it on and restart your device.
2. After the restart head back to settings, head to Phh Treble settings, then misc and enable "Force headphone switch" and
Click to expand...
Click to collapse
Thank you very much, i'll try it, i don't get yor first sentence, is it broken for everyone? (english isn't my first language)
wesleyvanneck12345678 said:
1 share the gsi twrp is broken for even on a android 11 gsi as for audio
1. Go to developer options, find something like "Disable A2DP offload", turn it on and restart your device.
2. After the restart head back to settings, head to Phh Treble settings, then misc and enable "Force headphone switch" and
Click to expand...
Click to collapse
It worked without forcing headphone switch, tysm! Now i'm working to get some padding on the status bar if i'm able to
Tommy0000 said:
It worked without forcing headphone switch, tysm! Now i'm working to get some padding on the status bar if i'm able to
Click to expand...
Click to collapse
if make cutout work send it phhusson
wesleyvanneck12345678 said:
if make cutout work send it phhusson
Click to expand...
Click to collapse
I successfully made one with nonsense notch, idk if i can send phh the apk the module created, i used the customleft script at 240 px
Tommy0000 said:
I successfully made one with nonsense notch, idk if i can send phh the apk the module created, i used the customleft script at 240 px
Click to expand...
Click to collapse
share it with me am waiting for fix to long with gsis
Tommy0000 said:
I successfully made one with nonsense notch, idk if i can send phh the apk the module created, i used the customleft script at 240 px
Click to expand...
Click to collapse
you cant send it to him but i didnt know mudule but can you share it with me
Sure! I've used nonsense notch to create an overlay at 240 pixel from the left of the statusbar, it doesn't work on landscape mode but it's fine for me.
Idk if it works by just inserting it in /system/product/overlay and unzipping it and then maybe installing the apk(?) (Mine it's in a folder that's why i made a zip file)
Overlays are really tricky, i recommend following the guide for the module instead of doing this.
After installation you can go to dev options and under simulate screen cutout you can choose the one you created *DO NOT CHOOSE THE STOCK OPTIONS ON ANDROID 12 THEY WILL SOFTLOCK YOUR PHONE*
I will create a guide on the fixes for gsi roms with your audio tweaks and this one, thank you again, let me know if you succeed!
Again, you shoudl really create one yourself on the custom mode of this module https://forum.xda-developers.com/t/module-n3o-no-nonsense-notch-overlay.4226413/
I created a guide to install everything https://forum.xda-developers.com/t/...s-nairo-and-some-post-install-tweaks.4364963/
Tommy0000 said:
Sure! I've used nonsense notch to create an overlay at 240 pixel from the left of the statusbar, it doesn't work on landscape mode but it's fine for me.
Idk if it works by just inserting it in /system/product/overlay and unzipping it and then maybe installing the apk(?) (Mine it's in a folder that's why i made a zip file)
Overlays are really tricky, i recommend following the guide for the module instead of doing this.
After installation you can go to dev options and under simulate screen cutout you can choose the one you created *DO NOT CHOOSE THE STOCK OPTIONS ON ANDROID 12 THEY WILL SOFTLOCK YOUR PHONE*
I will create a guide on the fixes for gsi roms with your audio tweaks and this one, thank you again, let me know if you succeed!
Again, you shoudl really create one yourself on the custom mode of this module https://forum.xda-developers.com/t/module-n3o-no-nonsense-notch-overlay.4226413/
Click to expand...
Click to collapse
thank you very much it works and it even does my games without a black bar
wesleyvanneck12345678 said:
thank you very much it works and it even does my games without a black bar
Click to expand...
Click to collapse
Ye it's very fortunate it stops working when landscape! I quite like that non-feature