[ROM][11.0] Styx Project [OFFICIAL][Ginkgo] - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

[ROM][11.0] Styx Project [OFFICIAL][Ginkgo] - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

Awesome work!

tberma said:
Does it support Sunlight mode?
Does it support Wifi Coverage Extend Option?
Does it support whitelisting apps from dark mode?
Does it support MIUI Camera with the same stock 48MP quality?
Does it support adjusting freeform windows despite the manifests?
Does it support skipping unlocking the device with a PIN after a reboot
Does it support invert-nav-bar (force close back button)?
Does support Game Mode?
Does it kill apps in the background for just switching between them?
Does Mi sound work for wireless and wired headphones?
Does it support pop-up?
Does it show internal shared adopted storage on TWRP?
And does it have ADB over network/NTFS File format/Soft Reboot/Advanced Power Menu/Quick actions via pop-up notifications.
Hard luck with development
Click to expand...
Click to collapse
Stop asking these same questions on every ROM!
You do know about Pixel binning?
There's no such thing as a gaming ROM so stop asking for features..
Try for yourself. It's GOOD LUCK with Development. Not hard luck...

Can anyone provide screenshot of customization?

bmark240 said:
Stop asking these same questions on every ROM!
You do know about Pixel binning?
There's no such thing as a gaming ROM so stop asking for features..
Try for yourself. It's GOOD LUCK with Development. Not hard luck...
Click to expand...
Click to collapse
You may be right. I should have said good luck not hard luck why didn't you say that from the beginning.
I just want to help in order they create different ROMs. I don't remember but I may have seen an AOSP rom with the Game Mode so I don't understand the point behind Pixel Binning?
I may have created my ROM if I was developer . I'm not ready for it so sorry to let you down.

http43 said:
Can anyone provide screenshot of customization?
Click to expand...
Click to collapse
There's currently not any customization (apart from advanced reboot maybe). It's a new project, so stuff are to be added!

Update!
Source changelog:
- Merged March ASB.
- Performance improvements from the previous edition.
- Scrolling friction optimizations.
- Added Inter as default font.
- Addition of FOD.
- Enabled Permission Hub.
- Added Styx branding.
- Added some icons that were missing in Network.
- Remove dividers from system.
- Finally, clocks!
- Optimize face unlock.
- Switch to -O3 optimizations for JNI.
- Enable zygote preforking by default.
- Doze.
- Smartspace.
- Yes, there's an Easter egg now!
- Fix the annoying battery tilde issue.
And many more things that'd make your experience a tad bit more wholesome!
Device changelog:
- Updated stock blobs from MIUI 21.3.3
- Updated CAF blobs from LA.UM.9.11.r1-02800
- Updated redfin fp to march (fixed safetynet)
- Fixed camera freeze in some apps
- Fixed camera lens switching delay
- Fixed voip/mic issues in some apps
- Switched to new QTI thermal HAL
- Attempted to fix screen blackouts under sunlight/heat
- Improved GPS configs
- Improved rounded corners and fixed hide cutout option
- Added support for willow hwversion 18.31.0
- Kernel upstreamed to v4.14.224, merged CAF tag LA.UM.9.1.r1-09100-SMxxx0.0
- Fast charging on chinese variants maybe fixed
- Misc performance improvements and fixes

After setting the RGB Values to 230, Xiaomi Parts would no longer be used after a restart. It also happened in Arrow OS.

ifacedown said:
After setting the RGB Values to 230, Xiaomi Parts would no longer be used after a restart. It also happened in Arrow OS.
Click to expand...
Click to collapse
I couldn't reproduce it. Did you use any modules?

Update!
Source changelog:
- The latest and greatest security fixes merged into both source and device repositories
- A simple beautiful network indicator
- A new fresh music player app!
- Added OOS clear all
- New custom lock screen clocks to suit your taste
- Smart replies for older apps too
- Redesign lockscreen shortcuts
- Absolutely refreshing settings dashboard!
- Brightness bar issues fixed
- Long press volume for skipping tracks
- Redesigned Media Player view
- FOD improvements!
And our premier performance backports and improvements, making your user experience one of a kind.
Device changelog:
- Bump to StyxOS 1.2
- April 2021 Security Patch and fingerprint
- Updated init scripts from CAF
- Explicitly enabled iorap
- Kernel upstreamed to v4.14.229, merged CAF tag LA.UM.9.1.r1-09200-SMxxx0.0, thermal drivers updates from 4.19, updated speaker amp driver from ginkgo-q-oss

kostas gp said:
I couldn't reproduce it. Did you use any modules?
Click to expand...
Click to collapse
No, I didn't use any modules. Just in the Settings.
But I use other Modules in Magisk like:
MIUI Cam,
Viper4Android
Chromatix Mod 1.6
Thank you!

Update!
Source changelog:
Welcome to Mellow May!
This time, our release might not be as good as the previous one, but we did improve on device-specific performance and removed all bloat regarding the UX!
We have now updated to the May 2021 security bulletin and now include our own beautiful bootanimation made by Nikhil from CesiumOS!
Device changelog:
- Switched to dipper fp
- Updated blobs to MIUI 21.4.28
- Updated CAF blobs from LA.UM.9.11.r1-03200-NICOBAR.0
- Updated WifiOverlay from LA.UM.9.1.r1-09100-SMxxx0.0
- Updated auto brightness config from stock
- Switched to oss perf hal
- Lower little cluster min freq to 864Mhz
- Enable conservative pl boosting
- Sync scroll boost freqs with CPU input boost
- Tune perfboostsconfig for performance
- Import QTI perf configs from stock
- Added option to use fp as camera shutter
- Kernel upstreamed to v4.14.232, merged LA.UM.9.1.r1-09600-SMxxx0.0 CAF tag, added compat (32bit) vdso, CPU input, Devfreq boosts, kernel space battery saver
- Probably more improvements...

Update!
Source changelog:
- OTAs!
- Android S Clocks
- Styx Connect, a seamless way to integrate the smartphone and desktop experience! (thanks KDE )
- A newer, cleaner implementation for Face Unlock (thanks PixelExperience!)
- Added new Sensors disabling tile along with the commonly-asked-for DataSwitchTile!
- New icons!
- We've updated PulseMusic to 4.3.0 It is now directly updatable from the Play Store!
- Fixed theming
- Misc performance optimizations.
Device changelog:
- Updated stock blobs from MIUI 21.7.7
- Updated CAF blobs from LA.UM.9.11.r1-03900-NICOBAR.0
- Kernel upstreamed to 4.14.239, merged LA.UM.9.11.r1-04300-NICOBAR.QSSI12.0 CAF tag
- Fixed tiktok, QQ and other apps crash due to vulkan
- Added LED indicator for offline charging
- Reduce schedtune boosting for lesser heat
- Freed some RAM from useless virtual framebuffer
- Switched to QTI health implementation

Update!
Source changelog:
It is September, and officially the last month of support for 1. It's been a great year, so much support, so much care into each and every release.
But it's time.
To move on to another release.
With Styx 1.8, we have merged the September security patch, again, as usual, within a few hours of the release. Sources are frozen and will not be updated. Work will move on to 2 as soon as possible.
It's the end of a wonderful journey.
See you in 2.
Device changelog:
- Updated MIUI blobs from MIUI 12.0.2.0.RCOMIXM
- Boost I/O during bootup to improve boot speed
- Boost CPU during wake for faster faceunlock
- Increased default f2fs checkpoint interval
- Increased hispeed freq for big cluster
- Disabled conservative PL boost
- Reverted AOSP's old VM settings tweaks
- Added hbm and cabc mode in xiaomiparts
- Upstreamed kernel to v4.14.246
- Relaxed GPU undervolt a bit
- Merged LA.UM.9.11.r1-04600-NICOBAR.0 caf tag

Related

[ROM] [5.1.1] Cyanogenmod 12.1 for HTC One V

Changelog:
20160826:
- Reverted some wifi changes
- Security fixes
20160703:
- Fixes from June Security Bulletin
- Kernel security fixes
- Disabled Multi user support
- Removed some unneeded binaries
- Increased wifi voltage and other wifi changes
20160507:
- Fixes from May security bulletin
- Kernel security fixes
20160411:
- Fixes from April security bulletin
- Added a workaround to use handset microphone when calling with headset
20160313:
- Upstream bugfixes
20160311:
- Includes the fixes of the march android security bulletin
- Kernel memory management updates
- Enabled dex2oat watchdog again
- Fixed boostpulse of interactive
- Fixed the rmt_storage daemon
20160203:
- Includes the fixes of the february android security bulletin
- Activated vdd sysfs interface for CPU voltage control
- Disabled the dex2oat watchdog, should fix gapps problems
- Updated zram kernel driver and enabled lz4 compression for zram
- Cleaned up cpu governors
20160106:
- Includes the fixes of the newest android security bulletin
- Set the default IO scheduler to bfq again
- Updated the interactive governor
- Increased the size of the SF heap
20151221:
- Fixed some audio bugs
- Default IO Scheduler set to FIOPS for better performance
20151212:
- Fixed screen unblanking problems
20151204:
- Updated display HAL and framebuffer to CAF versions
- Updated adreno blobs and kgsl to jb_2.5.5
- Fixed the webview crashes
- Changed system memory allocations
- Enabled systrace and function tracer
- Much smaller updates
20151105:
- Fixed camera bugs
- Changed default governor to interactive
- Lowered lowmemorykiller aggressiveness
- Some changes in power HAL
20151006:
- Fixed the new stagefright vulnerabilities
- Other important security fixes
- Changed IO-Scheduler to updated version of BFQ
- Enabled support for IPv6 tethering
- Removed internal storage support
- Enabled adaptive LowMemoryKiller
20150916:
- Fixed the fiops scheduler
- Some F2FS improvements
20150902:
- Changed the default scheduler to fiops
- Added some NAND tweaks
20150825:
- Security fixes for new Mediaserver vulnerability
- OTA server optimizations
20150816:
- New fixes for stagefright vulnerability
- Other security fixes
- No dexpreopt
20150731:
- Increased available ram
20150711:
- Standalone power collapse enabled for power saving
- Video codec improvements
20150616:
- Usb charging fixed
- Wifi disconnecting bug fixed
- Flashlight works when screen is off now
- Panel initialization time improved
20150609:
- Music bug fixed
- Build has dexpreopt
- Wifi direct support added
- USB-Otg support added
- dex2oat mode changed to balanced
- Kernel compiled with ubertc 5.1 toolchain
20150529:
- Fixed screen flickering bug
20150525:
- Performance improvements
- Internal storage support (Micro-sd still is the default storage)
- Added DeviceSettings control for doubletap2wake tapping-height
- Low-end video codecs added
- Camera improvements
20150523:
- Fixed some OTA bugs
- Improved dalvik vm heap sizes
20150521:
- Wifi issues fixed (upstream bugs)
- Decreased zram to 128mb again
- Earpiece sound quality improvements
- Added OTA server (YOUR DEVICE HAS TO BE S-OFF TO USE IT, otherwise flashing the kernel won't work)
- Using app switching button for app switcher now
20150511:
- Much performance improvements
- New bcmdhd wifi driver and firmware
- Wifi hotspot fixed
- Fixed WhatsApp voice calls
- lz4 algorithm for zram
- Increased earpiece volume, maybe incoming calls are louder now
- Enabled noise cancellation, speakerphone should work now
- Disabled dex2oat watchdog, maybe gapps will work better
20150503:
- Fixed wifi issues
- Fixed wrong system partition size (flash TWRP 2.8.6.0_2)
20150502:
- Performance improvements
- New default CPU-Governor: Intelliactive
- Bluetooth-Sleep support
- Much better memory allocation: 371mb of ram now
- New adreno drivers
20150428:
- F2FS support (you need TWRP 2.8.6.1: Format data and cache partition with f2fs)
- System partition size fixed
- Low brightness fixed
- Bluetooth bugs should be fixed
- Using NuPlayer by default now
- Dialer lookup enabled
- No dexpreopt
20150427:
- Updated to Android 5.1.1
- Much bugs fixed
- Most things are working
- Performance improvements
- ADB security enabled
- With dexpreopt (first boot will be fast)
20150403:
- First build

Reserved

gonna try this tomorrow. good job dude

Is rastomanchik also working on this ROM?

Shoaib05 said:
Is rastomanchik also working on this ROM?
Click to expand...
Click to collapse
I think he will work on it (maybe after kitkat is totally completed)

Nice to see that HTC One V is not dead! Great job mate!

Amazing work on this! I never thought my One V would even run KitKat, honestly.
Anyone notice a speed difference with and without Gapps? The ROM seems to be excruciatingly slow if I use Gapps, but if I don't, it's as fast as CM11.

Can you?
Can anyone tell me whole installation process please. Do i need latest recovery? How to install latest recovery through mobile?

sultan1419 said:
Can anyone tell me whole installation process please. Do i need latest recovery? How to install latest recovery through mobile?
Click to expand...
Click to collapse
Yes you need the latest recovery: http://forum.xda-developers.com/htc-one-v/orig-development/recovery-twrp-2-8-5-0-primou-t3040186

Cm12.1 successfully booted with the new kernel, everything works except gps at the moment!!!

Wow

jonas2790 said:
Cm12.1 successfully booted with the new kernel, everything works except gps at the moment!!!
Click to expand...
Click to collapse
Awesome. I am very excited to try it. :cyclops: I can't believe that HTC One V will run Android 5.1.

I want to know to install this rom on one v using phone. As now i have cwm recovery so tell me how to install twrp on it through mobile. And after installation what to do in detail please.

When is the next build?

hehaichi said:
When is the next build?
Click to expand...
Click to collapse
please respect the developer. And no ETAs.

AuliaYF said:
please respect the developer. And no ETAs.
Click to expand...
Click to collapse
I am in NO WAY disrespecting the developer. He/She may choose not to reply to my query.

hehaichi said:
I am in NO WAY disrespecting the developer. He/She may choose not to reply to my query. I dont need a third person poking his nose.
Click to expand...
Click to collapse
no need to be like this, but asking for ETAs is breaking the xda rules.

jonas2790 said:
Cm12.1 successfully booted with the new kernel, everything works except gps at the moment!!!
Click to expand...
Click to collapse
no mute in calls and no bass bug no?

Amish. said:
no mute in calls and no bass bug no?
Click to expand...
Click to collapse
I didn't test the calls but bass is working

[Rom][X00T][9.0][POSP][2.3][official][weeklies](20/07/2019)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Now that I'm done saving my butt, let's proceed
Potato Open Sauce Project is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own sauce to it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
[SIZE=+2]Team Potato[/SIZE]
@Agent_fabulous
@ZerNico
@Adesh15
@akhilnarang
@JagravNaik
@ShreyanshLodha
@deletescape
Design:
@McAwesomePL
Joshua Baldassarre
[SIZE=+1]Got an issue or suggestion? Reach us at[/SIZE]
Telegram: https://telegram.me/SaucyPotatoesOfficial
Google Plus: https://plus.google.com/u/0/communities/117684625601494456609
Twitter: https://twitter.com/PotatoAndroid
Themes
- Base color options
- Over 15 accents to choose from
- Light, Dark and Black styles
- Tinting of settings icons independently
- Rounded corners and content padding customisations
Gestures
- Swipe Up gestures
- Device extras (if supported)
OTA Updates support: Coming soon!
POSP: PotatoProject
POSP Device Sources: PotatoDevices
POSP Code Review: Repositories available on Gerrit Code Review
[SIZE=+1]Clean Install[/SIZE]
- Backup all your data (Important)
- Wipe /system, /data and cache.
- Flash the ROM + GApps (Download link below)
- Reboot
[SIZE=+1]Updates[/SIZE]
- Flash ROM
- Reboot!
ROM: POSP
GApps: OpenGApps
[SIZE=+1]Credits[/SIZE]
- Google for AOSP
- Team Potato
- AOSiP
- Dirty Unicorns
- LineageOS
- @hundeva for Lean Launcher
Special thanks to @akhilnarang and @sagarshah1729 for https://review.potatoproject.co and the domain 
XDA:DevDB Information
[ROM][X00TD][9.0][POSP][2.0][UNOFFICIAL], ROM for the Asus ZenFone Max Pro M1
Contributors
BabluS, SagarMakhar
Source Code: [url]https://github.com/PotatoDevices/kernel_asus_sdm660[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: latest available
Version Information
Status: Beta
Created 2018-10-14
Last Updated 2018-10-20

(14/10/2018)
-Intial build
Changelog for build 11/03/2019 :
- Merge latest security patch
- android-9.0.0_r34
- Network activity indicators in QS
- New accents
- Add GoogleSans to actionbars
- New default wallpaper (PotatoLand)
- Statusbar Bluetooth battery indicator
- Statusbar NFC icon
- Clean up volume panel code
- Fixes to op-gestures on keyguard
- Expandable volume panel
- Initial Flutter and gradle project support in build system
- Properly support A/B backuptools
- exFAT support
-lot of things changed since my initial build u can check posp git
-lot of cleanups from device side
-Merged latest linux tag and caf tag
-Some minore fixes
Changelog for build 01/04/2019:
- Initial Official Weekly build
- Now the settings icon tint applies for every device. We don't need bugs kthx
- We just removed the cool guy spying on you every time you rebooted SystemUI from QS footer. What a creep.
- Now ambient display works even when heads up is disabled
- Alert for notchy bois! We added the statusbar icon toggler on fries so you can dededelet all the useless icons
- Now fries can actually be used without getting an headache with the menus
- Shiet upstreamed
- We fixed some theme derps, so now it's all cool and good
- We also added Russian translations, наслаждайся картошкой!
- We fixed a couple of things, we recommend flashing as soon as the build rolls out
- Ȳͤo̱̺u
- Picked blobs from pie beta Thanx to @krasCGQ
- Merged latest linux tag and caf tag
- Some minore fixes
Changelog for build 07/04/2019
- We fixed the wake-up delay. Your phone now is always ready and steady to bear your power button abuses.
- The delay fix will actually improve battery backup and squash some laggy bois too!
- We actually merged the April security patches (android-9.0.0_r35) released by Google so you and your device can be secure af.
- Fixed toast theming for a coherent experience on every theme. Now all we need is some butter and cereal for a good breakfast.
- Also fixed the "No service" and "Emergency calls only" text on persistent qs footer. Half readable texts are very bad >:[
-Upstreamed kernel to 178 tag
-Improved incall audio
-Some minor fixes
Note:- Pie beta firmware is necessary
Changelog for build 28/05/2019
Source Side:-
https://t.me/SaucyPotatoNews/170
Device Side:-
• Fixed media support.
• Updated most stuffs from stock 16.2017.1903.050.
• Updated graphics blobs from chiron China developer 9.3.21.
• Updated CAF HALs to LA.UM.7.4.r1-05000-8x98.0 / LA.UM.7.3.r1-07400-sdm845.0.
• Imported Soter blobs from stock.
• Reverted back to HIDL ANT+ from lavender China stable.
• Switched to source-built libsensorndkbridge.
• Restored and updated power off alarm configuration.
• Updated EIS-related props.
• Build [email protected] required by some blobs.
• Pre-optimized SystemUI.
• Dropped aptX support.
• Initial SEPolicy updates for Pie.
• Restart HIDL audio and camera provider services after successful decryption.
• Restart HIDL bluetooth service after setting proper MAC address.
• Cleanups here and there...
• kernel: Updated to Linux 4.4.179 and CAF LA.UM.7.2.r1-06700-sdm660.0.
• kernel: Cleaned few imports and update as per S050 source drop.
• kernel: Compiled with AOSP Clang 9.0.3.
• Improved signal strength
• Increased number of statusbar icons
Changelog for build 10/06/2019
- For every security freak out there, we merged the June security patch. Stay ?, stay safe!
- We added new APNs, so now many people who couldn't connect to internet with their sims before now should be able to. Niiceeeee.
- The old pixel animation on the navigation bar was hella bad, so we yeeted that out of the window and added a new one that is much better.
- We fixed some layout issues on the QS detail, and also that black on black text on data and dnd detail screen should be gone now. Better late than never.
- Now you can completely block data/internet usage from an app, dedicated to every privacy concerned peep out there <3.
- Remember the old location tile? Me neither, because now it's much better! It has 3 modes: high precision, device only and low battery consumption. And ofc, disabled state too lol.
- We fixed some aggressive battery issues (I don't really know which ones, but they are fixed now so).
- New adjustments made to lockscreen clocks.
• Every clock now tracks accent correctly, ayee!
• The Q styled clock now animates on time change! I think I'll never leave the lockscreen just to admire that sweet animation uwu.
• Now the owner info gets aligned with the q clock, for a coherent experience.
- The oreo panel got some brand new improvements that make it feel like oreo free real estate:
• We just brought back the old oreo layout, making the experience much better than before.
• Now the panel is compatible with custom qs colors, make your panel look unique!
• The notifications now take the entire screen, just like oreo, so you can always catch up with them.
• Animations now play steady and ready, fast af. I can assure you that they are much better like this.
• And last but not least, the network traffic indicator finally shows up on oreo panel, so you'll be always ready to catch up with the net usage.
- Now the call blocking function should be much more efficient, we don't want any new promotion thanks.
- And finally, you can now control music on the qs panel much better with a q styled seekbar allowing you to control the current minutes and seconds of the song playing. So you can catch up with your favourite part of the song!
- The builds are now signed with release-keys, so you can be sure you only install platform packages signed by us!
- Some fixes and optimisations
This should be it! OTA will fail to verify. You can download the build via Center and flash it along with the migrate zip yourself, this one time. We do recommend clean-flashing, however
Once you have installed this build, you can seemlessly keep updating via OTA!
Note: Flash firmware-only zip once before flashing ROM!

Changelog for build 20/07/2019:
https://forum.xda-developers.com/as...nt/x00td-rom-unofficial-t3854053/post79935282

Reserved
---------- Post added at 03:35 AM ---------- Previous post was at 03:34 AM ----------
Dev add some screenshots so that we can have a sneak peak ??

[QUOTE = BabluS; 77876710] [/ QUOTE]
Hello please do usb otg and battery settings work?

Full House said:
[QUOTE = BabluS; 77876710] [/ QUOTE]
Hello please do usb otg and battery settings work?
Click to expand...
Click to collapse
Otg works randomly and battery stats will work fine

[QUOTE = BabluS; 77924879] Otg works randomly and battery stats will work fine [/ QUOTE]
Ok thanks for the answer brother.
I tested PixysOS otg usb and battery settings do not work.
There is also a bug with black theme.
Please, does this theme work well on POSP and the snapdragon stock camera is compatible with this rom?

Full House said:
[QUOTE = BabluS; 77924879] Otg works randomly and battery stats will work fine [/ QUOTE]
Ok thanks for the answer brother.
I tested PixysOS otg usb and battery settings do not work.
There is also a bug with black theme.
Please, does this theme work well on POSP and the snapdragon stock camera is compatible with this rom?
Click to expand...
Click to collapse
Balck themes will be fine. Stock cam wont work on pie until asus release pie rom

If otg doesn't work when u plugs the cable, reboot without unplugging the cable, after reboot it will work. Had done it with every rom i have ever used.

New build up check op for download link and changelog

Pro

Any chance of this going official??

zohaibahd said:
Any chance of this going official?
Click to expand...
Click to collapse
I think so, he committed to official POSP tree for X00T. Really hope it gets official.

Weekly build available check op for download link and changelog
Download latest build from weeklies folder

Is nxp or dirac present

lokesh773 said:
Is nxp or dirac present
Click to expand...
Click to collapse
Nope

BabluS said:
Nope
Click to expand...
Click to collapse
Any plans to add NXP in future release?

fushinari said:
Any plans to add NXP in future release?
Click to expand...
Click to collapse
Flash it yourself

New build available check OP for Changelog.
Download: https://sourceforge.net/projects/po...00T-9-20190407.Baked-v2.2.WEEKLY.zip/download
If u are on previous build u can update via ota

fushinari said:
Any plans to add NXP in future release?
Click to expand...
Click to collapse
Nope

[ROM][11.0][OFFICIAL][2021/02/19] Fluid 1.2 for Miatoll

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid experience coupled with themes and customisations.
#FeelsFluid
Fluid doesn't aim at providing all the customisation available on the planet. We are focused on a cleaner, more Material design approach, with a few twists that assured, we do have a dedicated theme engine with cool stuff getting added every new update. So sit back and enjoy Fluid on your device!
Code:
- Fluid Themes
- Adaptive Icon shapes
- RGB Accent picker
- Prebuilt Accents
- Status bar icons
- Lockscreen clocks with Fluid FingerSense
- StatusBar Clock and Date customisation
- Network traffic indicators
- Network signal customisation
- StatusBar icon tuner
- Quick Settings Tiles customisation
- Font engine
- Live theme previews
And most importantly:
- A redefined UI
Download Fluid for your device here!
Miatoll
Wanna experience Fluid on your phone? Go ahead fam!
Code:
- Download the ROM (Gapps included)
- Backup every partition from OrangeFox Recovery
- Make a full wipe (system, data, cache, dalvik)
- Flash Latest FW (R India for Curtana, Q latest for Rest)
- Flash the FluidOS zip
- Flash Magisk (Optional and don't forget to enable Magisk hide of so After Boot)
- Wipe cache!
- And at last Reboot!
[First boot will take a few minutes! Have patience]
Clean Flash is always recommended!
Changelog for fluid
Code:
Fluid 1.1 Changelog 19/02/2021:
- Fixed Mis Merges of LA.UM.9.1.r1-08300-SMxxx0.0 CAF tag.
- Merged LA.UM.9.1.r1-8600-SMxxx0.0 latest CAF Tag.
- Merged 4.14.221 Latest Android Common Linux Kernel Tag, Thanks, Alex!
- Add QS Media Player toggle.
- Fixed probably all brightness bar-related bugs (it jumping around when swiped and lag related to it).
- New old-style data implementation.
- Fixed pink color on WIFI QS detail view.
- Re-added some audio props and configs, Thanks Sonal!
- Added a long screenshot chip.
- Redid system suspend wakeup calls sepolicy properly (partially).
Fluid 1.1 Changelog 04/02/2021:
- February security patch.
- Network Indicator (works in header and status bar).
- Fixes and other things nobody cares about.
- Merged Latest LA.UM.9.1.r1-08300-SMxxx0.0 CAF tag.
- Merged 4.14.217 Latest Android Common Linux Kernel Tag, Thanks, Alex!
- Improved Vibrations, Thanks, Ctwoon!
- Re-enabled Updatable Apexes, Thanks Sonal!
- Fixed Idles and wakelocks by addressing their denials, Thanks, Sonal x2!
- Changed power options menu's design.
- Fixed Aux lenses access in some camera apps like CTGcam.
Fluid 1.1 Changelog 25/01/2021:
- Kernel Memory Leaks fixes, thanks to Alex!
- Replaced Samsung's exFAT driver with a more updated one, Thanks to Alex!
- Added missing exfat repo to (finally!) fix exfat.
- Switched to Source-Built Soundtrigger HAL, Which should fix Audio lag/stutters on non-R miatoll devices, & Fix OK google on Non-Curtana devices.
- Stopped enforcing AAC codec on SBC headphones.
- Fixed Wired Audio Distortion on Max Volume.
- Fixed Issues with Landscape Mode.
- Fixed Color Mismatch on Fluid Logo in Settings.
Fluid 1.1 Changelog 22/01/2021:
- More Kernel Cleanup, thanks, Alex!
- More Tree Cleanup, thanks, Sonal!
- Fixed AAC codec
- Gappless initial (Can not be dirty flashed on Gapped Builds)
Fluid 1.1 Changelog 20/01/2021:
- Do proper headset buttons mapping
- Enabled Wifi WPA3-SAE
- Enabled Wifi Channel Bonding Mode for 2.4GHz Wifi
- Tree cleanup thanks to Sonal Singh
- Switched to GCam Go
- Extended ZRam to 2GBs thanks to dereference x2
- Switched to the Non-cleanup demon kernel (which has exfat driver so that's fixed)
- Centered punch hole in Status-bar
- Allowed More Icons in Status-bar
- Might have fixed Lag
- Fixed broken fonts on different apps
- Pocket mode
- Added primary themes (pitch black, lighter gray, etc.)
- Move blur toggle to display settings
- Fixed type clock translations & it's bugs
Fluid 1.1 Changelog 14/01/2021:
- Disabled Security Path Spoofing
- Fixed WFD (Thanks Raj & Sonal)
- Resolved Neverallows (Thanks Sonal)
- Fixed GBoard Spacing
- Disabled Kernel Auditing
- Fixed Some Lag
- Some Kernel Stuff
- Added two-button navigation in gestures
- Added signature spoofing support
- Fixed Date disappearing in Quick Settings
- Added Lower Temps for nightlight
- Add Wattage to advanced charging info
YOU CAN'T DIRTY FLASH THIS BUILD, IT WILL BRICK YOUR PHONE
Fluid 1.1 Changelog 13/01/2021:
- Enforcing
- Fix Off Screen Ok Google
- Fix SafetyNet
- Add Japan Region
Fluid 1.1 Changelog 07/01/2021:
- SafetyNet passed without Magisk
- Fix SafetyNet for Joyeuse
- Fix Device Name in about phone
- Add Exit to Screenshot Dialogue
- Fix Log Spam
Fluid 1.1 Changelog 02/01/2021:
- Initial Build
A clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
Remove any kind of security PINs/Password and Fingerprints before flashing this build.
Bug List:
Code:
None
Wanna report bugs and want them begone? Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
-> How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Visit our Website. Subscribe to our Telegram Announcements Channel. Also join our Telegram Community support Chat!
Want to contribute to the development of this ROM?
Checkout our GithubDevice Tree: DT
Common Tree: CT
Kernel Source: Kernel
Vendor: Vendor
People behind this amazing ROM!
- Ender1324
- AndroBuddy
- SebaUbuntu
- Dyrex2004
- Ovenoboyo

Is SELinux Enforcing working

What are the bugs still presented?

This looks like a great Android 11 ROM! Might upgrade from PixysOS to this in the foreseeable future, I enjoy minimal ROMs with small amounts of customisation. Looking forward to seeing how this ROM progresses.

Udit4060 said:
What are the bugs still presented?
Click to expand...
Click to collapse
Only WFD

Udit4060 said:
Is SELinux Enforcing working
Click to expand...
Click to collapse
No, It might come soon

Is there any version of the ROM WITHOUT Gapps?

i installed for a try.
looks well and works more than fast.
Both sim cards were working. Wifi and BT w/o issues.
having joyeuse - QJZMIXM,
Installed via Orange Fox Recovery Project.
RN9Pro Global.

the whole rom is perfect, but I just noticed there's a small lag and the Google Maps app crashing a lot.
thanks for this awesome project.

Devel0per95 said:
the whole rom is perfect, but I just noticed there's a small lag and the Google Maps app crashing a lot.
thanks for this awesome project.
Click to expand...
Click to collapse
Try updating apk from apkmirror

nilofino said:
Is there any version of the ROM WITHOUT Gapps?
Click to expand...
Click to collapse
Sadly not yet, but maybe next build

Very good and fast rom, on my device (Joyeuse) it boots in 30 seconds
I have encountered these little problems:
- "Google Pay" does not work with NFC payments
- Crashed "Android Auto", i have attached Logcat
- Fluid Customisation options are not translated into Spanish (in my case)
Thank for your work!!!

Devel0per95 said:
the whole rom is perfect, but I just noticed there's a small lag and the Google Maps app crashing a lot.
thanks for this awesome project.
Click to expand...
Click to collapse
Yep, same for me.

Hymix said:
Yep, same for me.
Click to expand...
Click to collapse
Google Maps fixed in Jan, update coming soon

How about SOT?

prvn.corp said:
How about SOT?
Click to expand...
Click to collapse
Yes, there is one.

RayDeemer said:
Yes, there is one.
Click to expand...
Click to collapse
I like this

Pretty good ROM so far. Only mayor problem I'm having rn is that my phone charges too fast with the stock charger (up to 6000mA), leading to the battery to quickly overheat. Device is Joyeuse. (xda wouldn't accept my log as txt, sorry)

Rulas25 said:
Pretty good ROM so far. Only mayor problem I'm having rn is that my phone charges too fast with the stock charger (up to 6000mA), leading to the battery to quickly overheat. Device is Joyeuse. (xda wouldn't accept my log as txt, sorry)
Click to expand...
Click to collapse
installed the Fluid and having same issue. 51 to 71% charged in few min but temp close to 43 degree C.

Exact same issue here on joyeuse. Should I be worried or it isn't that big of a problem?
BTW the rom is great, it looks and feels fluid; but what I am happiest for is the performance, here is the Sling Shot Extreme - OpenGL ES 3.1 score I got on the redmi note 9 pro(global) with all my applications installed.

[ROM][Official]ArrowOS 11.0[R|Android 11 r_46]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS

ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
DOWNLOADS
Click here to Download
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Device Tree: Lenovo Zuk z2 plus device tree
Vendor Tree: Lenovo Zuk z2 plus vendor tree
Kernel Source: Alchemy 3.18.140 by @ZyxxeZ
Thanks to:
@MR.HACKER5476
@ZyxxeZ
@geekboyprometheus
For their work on z2 plus non treble trees
Also thanks to @sanketp60 , @Rasenkai99 , @ZyxxeZ , @aswin_a_s for the great help and assist for build help and fixing bugs.
Lastly i would thank all the tester.

Bugs :
Vo-wifi calls
Native video calls from sim card not social app ones work fine
Navbar is not present as we have utouch if someone wants navbar to use gestures install any root explorer edit system.prop present in /system and just add this line at end, save and reboot qemu.hw.mainkeys=0
Changelog :
Device Side:
03/04/2021
- Initial Build
- Massive blob updates wfd, seccomp policy, cne, dpm, drm, qmi, radio, ims, graphic, media, av, rtp, protobuf, tui, peripheral, time service, gps, perf, power off alarm, sensor, libqcmaputils, libqrtr, eMBMS, audio, blobs from LA.UM.9.6.2.r1-03600-89xx.0 thanks to @ZyxxeZ for patching and @aswin_a_s for bsp zip.
- Merged latest caf tag LA.UM.8.6.c26-02400-89xx.0 into kernel also switch from statix to alchemy all credits to @ZyxxeZ for kernel tree.
- Compiled using Proton Clang 13.0
- Fixed instagram bug where videos are glitched due to old media xml in tree now all videos play fine
- Fixed low sound after reboot, if you still face low sound then flash dolby or viper
- Switch to new display and media HALS from LA.UM.9.6.2.r1-03600-89xx.0
- Fixed Press Home To Wake PH2W
- Added custom biometric now finger print unlocks faster
- Added underclocks and undervolts in kernel to save battery and run cool for better SOT/bb
11/04/2021
- Initial TREBLE Build with latest VNDK 30.0
- Se Linux ENFORCING
- Blob updates from LA.UM.9.6.2.r1-04100-89xx.0
- Enabled Smart charging
- Replaced stock snap cam with Google Camera Go
- Fixed some apps crashing like saavn, kredivo and other banking app which needed se linux to be enforcing
- Optimized Pixel offline charging animation now its smooth
- Disabled Always on display by default
25/05/2021
- Many SE denials have been addressed compared to last build where denials were spamming in dmesg logs now no need to flash permissiver
- split fstab loading load userdata on late fs and update fstab flags
- drop bootanim services
- Drop many deprecated flag including kernel flags
- Remove I-WLAN blobs
- fix init.qcom.early_boot.sh path
- Many more optimizations and bug fixes under the hood
12/06/2021
- Update Libaudcal from LA.UM.9.6.2.r1-04100-89xx.0 this fix the annoying audio issue which was present from pie on 3.18 roms.
- BatteryMeterView: fix logcat warning spam, This spam occurs when displaying keyguard.
- Silence spammy logs from camera blobs
- Filter out QTI performance spam
- Fixed many things crashing in system which created a hit on performance in previous build now build runs fluid all thanks to @ZyxxeZ for many source related patches for log spam and fixing the audio issue.
- Kernel updated and improved battery on idle and fixed screen freeze issues in games
14/07/2021
* Update GPS from LA.UM.9.6.2.r1-04100-89xx.0 & cleanup gps blobs
* Fix Gps not found in waze maps app
* Import hotword blobs from qssi-user 11 RKQ1.200826.002-21.6.2 release-keys
* Fix OK/HEY Google, now works for google assistant
* Kernel - added KCAL with default sat = 50 for rich boosted colors look
* Added kernel boosts for more smooth experience
* Kernel - Enabled 10 finger multitouch
* Disabled blurs by default;
* Addressed many sepolicy denials & reduce system logspam
* Improved stability and fix lag, stutter issues in ui
13/08/2021
* Update some audio blobs from LA.UM.9.6.2.r1-04100-89xx.0
* Force disable updatable APEX
* Drop Iorapd properties
* Kernel: Remove BCL (Fix phone lag below 30%)
* Kernel: Enable Exfat & Ntfs
10/09/2021
* Update bluetooth blobs from cheeseburger (OnePlus 5)
* Added ant+
* Disabled significant motion detector which caused idle drain
* Fixed wifi and bluetooth mac
* Added drm props
* Set voice call volume steps like on stock zui
* Fixed geekbench opencl test
* Removed unneeded cmdline options
* Improved pixel offline charger animation
* Build libdac from source
* Added xml for unlimited google photos
* Compiled with Clang 13.0.2
24/12/2021
* Initial Stable Build based on Dmitrii ( @ shuttercat ) trees
* Fixed Random Reboot issue which was present on 4.9 kernel based roms
* Switched from stock Zuk msm8996 thermals to Sony msm8996 thermals in kernel
* Kernel unstreamed 4.9.290 Alchemy
* Compiled using TRB Clang 14, LTO, Polly
* Se-Linux Status Enforcing
* Safetynet Pass even without magisk
* Low audio bug which was present in 3.18 is completely fixed now
Source Side:
- https://arrowos.net/changelog.php

Reserved

Cool, will there be a gapps version?

Xu.Pa K.u said:
Cool, will there be a gapps version?
Click to expand...
Click to collapse
Probably no,
You can flash nik gapps core which has minimum things
Gapps build consume more battery than vanilla also takes lots of time to settle down this results in heating
No point in building also users want call recording in dialer which is not provided by google dialer

@Pranav Temkar Appreciate your efforts. keep up the good work. If possible please also do some other ROM's for Zuk Z2 Plus.

Abhi_T said:
@Pranav Temkar Appreciate your efforts. keep up the good work. If possible please also do some other ROM's for Zuk Z2 Plus.
Click to expand...
Click to collapse
Currently msm xtended development has come to halt the source will be back soon
So i was thinking to maintain a rom with many customization and one minimal rom
Arrow fits best its pretty stable so will work on only these two maybe i change my mind later

Nice Work Sir

xtra sharif said:
Nice Work Sir
Click to expand...
Click to collapse
Thanks a lot sir

Some more Screenshots Below

xtra sharif said:
Some more Screenshots Below
View attachment 5271511View attachment 5271511View attachment 5271513View attachment 5271515View attachment 5271517View attachment 5271513View attachment 5271515View attachment 5271517
Click to expand...
Click to collapse
Thanks these will help others much appreciated

Will this go official?

osmosi said:
Will this go official?
Click to expand...
Click to collapse
No this wont go official as confirmed i had asked kuber sir he wont be doing arrow for zuk as the phone is being used by his sister and no blind builds from him
Also there is a pact where kuber will give me official only if i work with his trees but i will continue with dmitri trees
So it wont be official, i am happy without official too the rom provides same stability being unofficial too

Pranav Temkar said:
No this wont go official as confirmed i had asked kuber sir he wont be doing arrow for zuk as the phone is being used by his sister and no blind builds from him
Also there is a pact where kuber will give me official only if i work with his trees but i will continue with dmitri trees
So it wont be official, i am happy without official too the rom provides same stability being unofficial too
Click to expand...
Click to collapse
Oh Thanks for clarifying. I don't have any problem with Unofficial either,I just hope it gets regular updates.

osmosi said:
Oh Thanks for clarifying. I don't have any problem with Unofficial either,I just hope it gets regular updates.
Click to expand...
Click to collapse
related to updates/release i will be updating this on monthly basis as soon as arrow merge security patch i will push update.

New Update is live with april security patch and major tree changes
We have finally shifted to TREBLE with latest vndk 30 & SE Linux ENFORCING
with major performance tweaks and improvements
Build Date: 11/04/2021
Changelog:
Device side
- Initial TREBLE Build with latest VNDK 30.0
- Se Linux ENFORCING
- Blob updates from LA.UM.9.6.2.r1-04100-89xx.0
- Enabled Smart charging
- Replaced stock snap cam with Google Camera Go
- Fixed some apps crashing like saavn, kredivo and other banking app which needed se linux to be enforcing
- Optimized Pixel offline charging animation now its smooth
- Disabled Always on display by default
Source Side: https://arrowos.net/changelog.php
Bugs:
- With latest ril stack from caf, Volte work only on sim 1, if you change default data sim to sim 2 then rip volte.
- Safety net pass without root, if you install magisk then make sure you have enabled magisk hide, else safety net wont pass.
- If you face low audio then increase speaker gain using kernel manager or use dolby/viper.
Download links updated on thread shifted from gdrive to source forge

Pranav Temkar said:
Bugs:
- With latest ril stack from caf, Volte work only on sim 1, if you change default data sim to sim 2 then rip volte.
Click to expand...
Click to collapse
But this ever worked on custom ROMs ?? I would be glad if you could tell me on which custom ROM it worked... THanks for your hard work!!

vbvn said:
But this ever worked on custom ROMs ?? I would be glad if you could tell me on which custom ROM it worked... THanks for your hard work!!
Click to expand...
Click to collapse
Volte switch works on roms which have zui ril stack on lineage 17.1 dd3 had picked those old zui ril blobs and this fix volte switch issue
But those old zui ril blobs have great hit on battery life as network consumption is more in old zui blobs
Latest caf ril blobs have are well optimized than those old zui blobs
For reference you can check the commit message of the zui blobs present in lineage 17.1 by dd3boh
msm8996-common: Fall back to ZUI IMS-QMI-RIL stack · LineageOS/[email protected]
* From ZUI 4.0.247DEV * This fixes VoLTE not coming back after mobile data has been switched to 2nd SIM and back to VoLTE capable 1st SIM * Probably also fixes random IMS restarts as they can...
github.com

Everything's working alright except the navigation bar. It doesn't show up & when I edit the build.prop with "qemu.hw.mainkeys=0", the phone stucks on infinite bootloop.

shashke said:
Everything's working alright except the navigation bar. It doesn't show up & when I edit the build.prop with "qemu.hw.mainkeys=0", the phone stucks on infinite bootloop.
Click to expand...
Click to collapse
Probably you did something wrong
Check ss below it works fine

Development [Lisa][OFFICIAL][Android 13] The XPerience Project 17

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XPerience is a free, community built distribution of Android 13.0.0 which greatly extends the capabilities of your phone.
This project are based on CAF (CLO)
The XPerience Project since 2011

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

NOTE: READ this PLS
Please don't ask for etas
Please don't report same bugs all time
Report with logcat and dmesg
Screenshots representative only
Don't ask to add ANX it will never be included.
Click to expand...
Click to collapse
Features:
Custom tiles
Power menu customizations (reboot to recovery one touch in advanced reboot, for bootloader do a long touch)
Bionic optimizations
3 fingers swipe take screenshot
Long press on power to enable torch
Immersive nav
Gaming optimizations
Adaptive playback
Double tap to sleep
GameSpace
DC-Dimming
Screen ON/OFF animations (CRT as default)
Full screen apps support
High touch polling rate
Icon pack
Status bar icons
system fonts
Custom battery icons
Thermal profiles
per-app volumen control
Mi sound enhacer (aka dirac, hi-fi)
Clear speaker
WORKING:
Boot
Rild
5G/LTE
bluetooth
Camera
camcorder
MTP
Sensors
Led
Wi-Fi
MUSIC
sounds
Videos
DT2W
NFC
Bugs
You tell me
Install steps: Lisa installation
CAF BRANCH:
LA.QSSI.13.0.r1-07400-qssi.0
AOSP branch:
android-13.0.0_r11
Source forge | Pling
Or the web
http://thexperienceproject.org
Telegram Chat:
https://t.me/xperiencechat
GAPPS:
Not needed. included
The XPerience Project
Contributors
TeamMex , ghostrider-reborn and others
Source Code (device tree and kernel in the git):
https://github.com/TheXPerienceProject
ROM OS Version: Android 13
ROM Kernel: Linux 5.4
ROM Firmware Required: Unlocked Bootloader
Based On: CAF (CLO)
Version Information
Status: NIGHTLY
Changes in second post
Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
XPerience version:
Download url:
Did you--
wipe:
restore with titanium backup or swift backup (Say which):
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel(only yuki kernel is supported):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Also add a LOGCAT DMESG if required
logcat in formated version
adb shell logcat > log.txt for example
If you like my work, you can buy me a coffee , coke or any drink all donations are appreciated.
Ór
https://www.paypal.me/TheXPerienceProject

reserved for changelog
2023/05/19
Code:
- System: Fixed Auto-Brightness issues
- System: Merge tag 'LA.UM.9.14.r1-21600-LAHAINA.QSSI14.0'
- System: Merge tag 'LA.QSSI.13.0.r1-10000-qssi.0'
- System: SF: Scheduler: vote max for NOTIFICATION_SHADE
- System: Bluetooth fixes
- System: Animate auto brightness toggle
- System: enable UMO_SURFACE_RIPPLE
- System: Avoid cast exceptions
- System: SystemUI: Add support for black theme
- System: Introduce bypassEnabledBiometric on faceunlock
- System: Switch to leica camera
- System: upgrade fw to V14.0.3.0.TKOMIXM
- System: upgrade blobs to V14.0.3.0.TKOMIXM
- System: Switch to HWC brightness
2023/03/09[/B]
Code:
- Update:Merge tag 'LA.QSSI.13.0.r1-09200-qssi.0'
- Fixup!: Bluetooth codecs (now can be selected and for some reason aptx adaptive is showed as LC3 (seems qcom derped the source again))
- system: Add more sepolicy
- Fix: Internal crashes
- System: Implement F2FS compressed and XOR compression
- This build isnt added on OTA due to Format Data requeriment
Code:
Note: Format data required
2023/02/25
Code:
- Update:Merge tag 'LA.QSSI.13.0.r1-09100.04-qssi.0'
- Fixup: 64mpx on Miui Camera (thnks to HebrewX for share the missing commit)
- Fixup: Aptx Adaptative codec issue
- New: Add missing BT libs
- New: Updater move to new domain
- Update:Translations
- New: Changelog now is translated to some langs (using deep learning The translation may not be quite accurate.)
- New: Battery Widget
- perf: Reduce the timeout for dequeueing buffers
- Update: Audio conf from Miui 14
- New: uprev qti radio to 2.7 and enable fetching of QoS
2023/02/18
Code:
- Update: Merge tag 'LA.QSSI.13.0.r1-09100-qssi.0'
- New: Add Miui Camera based on miui 14 (Thnks to Ghostrider-Reborn)
- Update: Merge translations
- New: Add inverted layout on navbar
- Update: Common blobs to LA.QSSI.13.0.r1-09000
- New: Changed some sounds
- Fixup!: Revert to stock audio steps level (fix weird audio behavior)
- Update: ARM Optimized routines to v23.01 and from master (android)
2023/02/09
Code:
- Security Update:Includes security patch updates for android until 5 February and vendor until 5 January.
- Updated Yuki Kernel
- Introduce camera & flashlight keyguard affordance
- Enable new combined QS header layout
- Update smartspace to 13-QPR1
- Upgraded FW and blobs from miui_LISAGlobal_V14.0.2.0.TKOMIXM except dolby vision and display hal
- Enable performance mode
- WIP: Added New VRR
2023/01/11
Code:
- Update: Firmware updated to LISAGlobal_V13.0.8.0.SKOMIXM
- Update: Blobs from LISAGlobal_V13.0.8.0.SKOMIXM
- Fixup!: Use DT2W setting also to wake from AOD
- Update: Yuki kernel updated
- Fixes!: for dolby
- Fixup!: drop some blobs from device vendor to fully use the common one
- Device: Disable UBWC for WFD
- Merge tag 'LA.QSSI.13.0.r1-08600-qssi.0'
- Update: Aperture
- Update: ARM optimized routines
- Fix: default data SIM resetting after reboot
Nota: If you have a bt issue do a wipe data or clean bt data
2022/12/19
Code:
- Fixed boot issues
2022/12/17
Code:
- Fix: Fixed SystemUI crash caused by NPE in NetworkTrafficMetter when you add a call in the dialer (caused by OverlayChange)
- Update: Firmware updated to LISAGlobal_V13.0.6.0.SKOMIXM
- Implement reTicker
- Add reTicker also on GameSpace
- Updated Translations
- Merge tag 'LA.QSSI.13.0.r1-08300-qssi.0'
- Add HeadsUp tile
- Phone ringtone setting for Multi SIM device
- Updated Aperture and also add support for our device to record in 60fps
2022/12/14
Code:
- fixed Dolby vision issues
- Perf: Updated to LA.VENDOR.1.0.r1-15600-WAIPIO.0
- Adreno: Updated to LA.VENDOR.1.0.r1-16000-WAIPIO.QSSI13.0
- Set multiple vibration intensity levels
- Import userdata tuning from oriole
- Bluetooth: disable SIM Access Profile
- Updated translations
- Revert new vrr (it causes lags on 60hz devices)
- Merge tag 'LA.QSSI.13.0.r1-08200-qssi.0'
Note if you have 5G issues (india) flash the last firmware of india thnks to tg user oye_shukla
LISAINGlobal_V13.0.9.0.SKOINXM
2022/11/19
changelog:
Code:
- Fixup!:Fix sepolicy for LineageHardware service
- Address more sepolicy for lineage hardware
- Update translations
- Add FaceUnlock
- Blobs system: update to LA.QSSI.13.0.r1-07400-qssi.0
- Use last Yuki kernel
- Implement Bluetooth dialog
- UI & Bug fixes
- Perf optimizations
2022/11/14
Changelog:
Code:
- Merge tag 'LA.QSSI.13.0.r1-07600-qssi.0'
- Add stock display configuration for HBM
- Update Brightness overlay accordingly to hbm changes
- Add missing DPU configuration for yupik
- Update MIUI blobs to V13.0.6.0.SKOMIXM
- Switch to HWC based brightness
- Add black theme
- Remove High touch polling rate (bugged)
- Remove some non working components (added by gapps)
- Update translations
2022/11/09
Changelog:
Code:
- Merge tag 'LA.QSSI.13.0.r1-07400-qssi.0'
- Merge vendor tag 'LA.UM.9.14.2.r1-03000-QCM6490.QSSI12.0"
- ASB 2022-10
- Fix Immersive Navigation crash Setting
- Update Aperture cam
- f2fs tools dont scan in every new build only do it when kernel changes
- Sepolicy updates
- Performance optimizations
- LMKD changes
- Now the rom comes with erofs
- Yuki kernel update (check later our yuki kernel channel)
- Apply Gaming thermal conf when enable performance on GameSpace

reserved just in case

Finally thanks man Rom caf

Anyone tried it yet? What are the differences with PixelOS?

Hi
Thanks, this rom looks great.
Do voLTE/voWIFI work ?

newbie_or_not_newbie said:
Hi
Thanks, this rom looks great.
Do voLTE/voWIFI work ?
Click to expand...
Click to collapse
It works for me bro...

newbie_or_not_newbie said:
Hi
Thanks, this rom looks great.
Do voLTE/voWIFI work ?
Click to expand...
Click to collapse
Should work VoLTE not supported on my carrier

ROM is good...
If dev can fix now playing option (can't enable as of now, but can find the option). Brightness of the screen is getting too low intermittently especially while unlocking.

Raj Pandiyan said:
ROM is good...
If dev can fix now playing option (can't enable as of now, but can find the option). Brightness of the screen is getting too low intermittently especially while unlocking.
Click to expand...
Click to collapse
Now playing will be removed, I forgot to remove it.
about the low brightness it doesn't happen to me so if you have a way to show me and send logcat when unlock.

Overall the ROM is GOOD and I can tell the kernel has gone through some kind of optimizations to make it this smooth.
Here are the things I noticed though :
- No Smooth Display Option in the settings
- High Touch Polling Rate doesn't work.
- Screen sets itself to 60hz after unlocking the screen and doing something right away and goes back to 90hz if you don't touch it for like a second.

is there a flashing guide for this please?

does not allow you to enter the bank application (Sberbank)

GN-z11 said:
Overall the ROM is GOOD and I can tell the kernel has gone through some kind of optimizations to make it this smooth.
Here are the things I noticed though :
- No Smooth Display Option in the settings
- High Touch Polling Rate doesn't work.
- Screen sets itself to 60hz after unlocking the screen and doing something right away and goes back to 90hz if you don't touch it for like a second.
Click to expand...
Click to collapse
You also facing brightness issue?

I haven't noticed any problem with brightness so far but my testing was short lived as I have gone back to the old build of PixelOS for its stability on my end. May fully daily drive this one as the bugs gets ironed out.

GN-z11 said:
Overall the ROM is GOOD and I can tell the kernel has gone through some kind of optimizations to make it this smooth.
Here are the things I noticed though :
- No Smooth Display Option in the settings
- High Touch Polling Rate doesn't work.
- Screen sets itself to 60hz after unlocking the screen and doing something right away and goes back to 90hz if you don't touch it for like a second.
Click to expand...
Click to collapse
- Smooth display not needed it sets as 90hz and down to 60hz if not need to go on 90hz
- High touch polling rate working for me (hopping u not removed the kernel included I will check anyway, in case I find a bug or in case I have to drop it momentarily.)
- The screen drops the frequency to 60hz is normal due to the new vrr changes and when it detects that the screen is touched it goes back to 90hz or when you really need to go to 90hz (you almost don't notice it). https://github.com/TheXPerienceProj...mmit/1f459efe3803b87455cfa21d4be1fb1d4dad6756
Raj Pandiyan said:
You also facing brightness issue?
Click to expand...
Click to collapse
try enabling dc dimming or disable adaptive brightness since i didnt facing brightness issues i dont know how to help u.
theanik said:
is there a flashing guide for this please?
Click to expand...
Click to collapse
maybe if u read the main post?????

TeamMex said:
- High touch polling rate working for me (hopping u not removed the kernel included I will check anyway, in case I find a bug or in case I have to drop it momentarily.)
Click to expand...
Click to collapse
I used the stock kernel as it was already very smooth on my end. The High Touch Polling Rate at display settings can be turned on, but upon leaving the display settings and going back, it's automatically turned off.

For anyone facing caller id bug (where your number is appended to the caller one) there is a solution - disable VoLTE.
The problem is well known for LineageOS for several months but still no success for some countries like Poland.
Gitlab Issue

does safetynet pass without root?

Is it possible to replace the gapps in this ROM with MicroG?

Develop Bugs

welcome