How to go into the recovery mode for Motorola Android TV, I have update from Service center and they asked me to press and hold the power button while powering up the TV, but it doesn't work that way, anyone has any idea to put into the recovery mode or any way to install the .Bin file in my Android TV????
Did you know the key combination for recovery or bootloader
Related
first of all sorry for my english i'm korean and my device is kidle hdx7".
my device is bootloop grey kindle logo. not attatched adb with nomal cable and factory cable. but i finally into the kindle recovery mode..i write here help someone who like me. but i'm not completely recovery my kindle.this is only method just into the recovery mode. Anyone who knows after into the system recovery mode? only select 1.reboot your kindle and 2.reset to factory defaults i have already select No.2 but still stuck on grey kindle fire logo. how to next step? plz tell me...and write down my method.
1. You have to ready Factory cable and Win xp sp3(this is my computer)
2. turn on your kindle and connect your device on laptop and then automatically new driver searched by your com.
3. select speciall driver => select android phone =>adb interface
4. success adb interface driver => push power button and hold =>your device will be off (not start going on connect your com)
5. show device manager you will see qususb_bulk..
6. separate your kindle and hold power button about 2min.
7. start your kindle? again power off
8. hold both +,- bolume button and power button at the same time
9. start kindle? touch out all button
10. success system recovery mode
But what to do next? i don't konw... PlZ tell me next step??
I have a hard brick hdx too, hope someone can help.
making the thread up for you.
I was provided this device to try and help resolve the issue. I am not sure how it got to this point. I believe that it was rooted with a custom ROM, then the individual tried to install a stock ROM (method unknown).
The current situation is:
Galaxy Tab S 10.5 SM-T800 stuck in a bootloop with the TWRP logo on the screen. I can not get the tablet to go into download mode. I have tried all of the different methods to enter download mode, i.e. Power & Vol - & Home, Drain the battery > Plug into PC while holding Vol - & Home, Power & Vol + & Vol -. None of these combinations do anything. The only thing I can do to get a response is to press Power & Vol +, which reboots the device right back into the TWRP loop after the Samsung Logo. Power button alone does nothing.
The device is seen by Windows with the Samsung Drivers but is not mounted to a drive letter, and I can not mount it.
ADB , fastboot and Odin do not see the device.
I would like to flash a new rom either custom or stock, but I need to be able to get the device into download mode so it can be seen by odin.
Any help would be great.
Mike
Probably just timing and pilot error this one. I've never known of any Samsung device boot but be incapable of booting to download mode as download mode is bootloader related.
No working bootloader means dead device.
No matter what state the device is in at the moment with the usb cable removed, hold POWER + VOL DOWN (not up) + HOME until the Samsung boot logo comes up, hold for another couple of seconds then release. Download mode should appear.
I know it should be easy....
I know it should work but it is not, I will make a vid of the process and post. I can not make heads or tails.
Mike
ashyx said:
Probably just timing and pilot error this one. I've never known of any Samsung device boot but be incapable of booting to download mode as download mode is bootloader related.
No working bootloader means dead device.
No matter what state the device is in at the moment with the usb cable removed, hold POWER + VOL DOWN (not up) + HOME until the Samsung boot logo comes up, hold for another couple of seconds then release. Download mode should appear.
Click to expand...
Click to collapse
Is the home button actually working, are you pressing it firm enough?
If the home button doesn't register then the tablet will simply reboot.
Its a bit odd why twrp doesn't fully boot though unless it's the wrong one.
Does it hang at the twrp logo or continually reboot?
Hello, I have a Eunavi 2gb with DVD head unit *(without physical buttons) After an error with a update some pre installed apps doesn't work neither the settings menu. I need access to recovery out of Android but I don't know the key combination. Anyone has any idea?
[IMG="EUNAVI RADIO"]
https://es.aliexpress.com/item/Quad-Core-Car-Electronic-autoradio-2din-android-4-4-car-dvd-player-stereo-GPS-Navigation-WIFI/32741225526.html[/IMG]
jlaso1982 said:
Hello, I have a Eunavi 2gb with DVD head unit *(without physical buttons) After an error with a update some pre installed apps doesn't work neither the settings menu. I need access to recovery out of Android but I don't know the key combination. Anyone has any idea?
[IMG="EUNAVI RADIO"]
https://es.aliexpress.com/item/Quad-Core-Car-Electronic-autoradio-2din-android-4-4-car-dvd-player-stereo-GPS-Navigation-WIFI/32741225526.html[/IMG]
Click to expand...
Click to collapse
Did you found out how you access the recovery menu? My Eunavi gets stuck on boot screen after I upgraded to Android 7.1 and I want to enter recovery mode to atempt to sold the problem.
just connect a keyboard on BACK SIDE USB it is important front side doesnt work connect via backside usb press ctrl+alt+del device will restart than rapidly pres i key while holding alt + printscreen pray god for me
Hi, so I've updated to android 11 OneUI core 3 on my M31 but since I can't enter neither download or recovery modes. I press Power+Vol Up but it just boots as usual with no signal of recorery mode. If I press Power+Vol Down the phone keeps rebooting but never actually goes to download mode.
I do can enter recovery mode using ADB via PC but that's a very inconvenient way of doing it as it need the phone to be turned on and woking normally so if the phone break and I ever need to flash an image with Odin that's a no no.
Please share with me if you are having this problem. I didn't factory reset it yet because I don't want to go to the bank and register my phone again xD
EDIT: Ok... I found the issue.
Looks like sammy changed the way you get into recovery mode on Android 11(WTF?? why would you even do that??) and now you have one extra step to do (I would be very grateful if they've put a message about it after you update). In resume you don't need to worry your phone will break if you update to android 11, only the method officially changed.
To boot into recovery now you need to plug your phone on your PC, THEN press vol up + power.
Reference article: How to Boot into Recovery Mode on Samsung's One UI 3.0 Android 11 Update (New Method) (androidsage.com)
Well, i got a update too... but i was too lazy to download and install... so i'm good
Also, thanks for informing here. you saved many android devices.
Btw, i have no answer to your problem
But i hope everything will be solved and you will be good to go
Happy Androiding...........
In my case (UI 3.0 Android 11 DBT) I now need to have USB cable connected to PC before entering Recovery with VOL up and Power button. Download mode same as before with Vol up and Vol down and then plug in USB cable.
I had installed Android 11 but for some reason I had to go back to android 10. But after downgrading to android 10, I am not able to access Recovery or Bootloader.
Anybody please help.
Hello:
I use the Samsung Galaxy Grand Prime Plus J2 Phone.
I want to root my phone using the latest version of Magisk, 22.0. But I also have to install the TWRP custom recovery. Well I don't know how to get the phone in to fastboot to enable me install the recovery.
So, I will be most grateful if I can get some tutorial on how to boot the phone in to fastboot and subsequently install the TWRP custom recovery latest version.
Hope my question is well understood.
Thanking you in advance for your help.
The usual way to put the majority of Android phones into fastboot/odin/download mode is to :
Have the phone off
Hold down the volume down button
Hold down the power button to switch the phone on
Release the power button when the screen switches on
Release the volume down button when you’re in download mode
It’s easy to remember : volume down is for download mode
Likewise, to boot into recovery (to get your device back up), do the same while holding down the volume up button.
If you have an extra button (such as the home button on older Samsung phone), hold it in addition to the volume buttons.
(Some devices use other methods to enter different modes. I’ve seen :
Holding down both volume up and down buttons while pressing power
Holding either volume up/down while plugging the USB cable to a computer
All start with the phone switched off.)
As for TWRP, a quick search led me to https://forum.xda-developers.com/t/...axy-j2-grand-prime-plus-sm-g532f-g-m.3616589/
You’ll most probably need a Windows computer with Odin to flash TWRP for the first time. Once it’s done, you should be able to do without.