im having endless trouble flashing stock using DBT on SM-G986B tried Home_csc and CSC_Omc both have have got stuck on s20+5g logo it wont go futher,
i've went back to CUA8 locked both bootloaders and tried to flash DBT but still stuck on s20+5g bootsplash,
Related
hi. i bought a cheap G928T of somebody (30$) with software problem.
the phone is g928t. and the previous owner (dont know what he was trying to do) installed G928F firmware UK BTU.
now the phone cant read sim card (null) (baseband unknown)
i tried flashing g928t firmware 5.1.1 (PAC), tried using TMO Pit, tried custom firwmare then stock. Nothing working.
tried flashing from 7.0 BTU UK to 6.0.1 or 5.1.1 UK BTU but odin error device 3 binary 2
tried downgrading and nothing happened.
is there anything else i can do to install back the g928t firmware back ?
its showing g928F instead of T. Please help
thanks
kodex99 said:
hi. i bought a cheap G928T of somebody (30$) with software problem.
the phone is g928t. and the previous owner (dont know what he was trying to do) installed G928F firmware UK BTU.
now the phone cant read sim card (null) (baseband unknown)
i tried flashing g928t firmware 5.1.1 (PAC), tried using TMO Pit, tried custom firwmare then stock. Nothing working.
tried flashing from 7.0 BTU UK to 6.0.1 or 5.1.1 UK BTU but odin error device 3 binary 2
tried downgrading and nothing happened.
is there anything else i can do to install back the g928t firmware back ?
its showing g928F instead of T. Please help
thanks
Click to expand...
Click to collapse
bump.... any help?
http://www.mediafire.com/file/w3ezy34hu9wscus/SM-G928T+COI5+Modem+and+Bootloader.tar
This file is currently set to private.
My request has sent
I have a Samsung S9 which is Vodafone carrier. I tried to flash XSA firmware but it still have the Vodafone apps.
Could some assist me in how to successfully removed the Vodafone apps without root.
I'm using the lastest Odin and flashing the lastest XSA firmware but still no luck. Even tried factory reset before and after flashing the firmware. I've also tried flashing Telstra firmware and it still holds the Vodafone apps.
anyone? am i doing something wrong?
RESOLVED: Via below link
https://forum.xda-developers.com/ga...de-how-to-change-s9-s9-csc-model-csc-t3870836
I had to change my CSC code from VAU to TEL while on combination firmware then flash TEl firmware
Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.
You need to root it and change CSC with phone info app to KOO
numpea said:
You need to root it and change CSC with phone info app to KOO
Click to expand...
Click to collapse
I guess that's the only remaining way, but do you know why it picks SKC instead of KOO, even if the firmware that I'm downloading is KOO.
Korean CSC is a multiCSC even if you download KOO firmware you phone will use SKC that's included in the CSC so there is no different korean csc there's only one that includes the 4 csc codes
i have rooted device but i need multilanguage. ho i can debrand or add orginal languages?
tejanaqkilica said:
Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.
Click to expand...
Click to collapse
i've to face the same thing mine is KTC but it shows SKC. idk what to do after did that always my device is getting overheat
Ok
I have a Samsung S20 which is unlocked but originally using THREE Network. I have the Original Firmware downloaded already for either VODAFONE or BTU. I also have installed TWRP and MAGISK. I also have Flashed with Up Parim Tar to get rid of the Bootloader Open etc.
What I want to Know is, I want to change the Boot Logo from THREE to either VODAFONE or BTU. I originally Flashed the BTU in the hope it would remove the THREE details but it has not.
I have read a little but thought Id ask here for some help. I have read to use patched ODIN and HOME CSC to keep all my data and settings and flash with either VODAFONE or BTU and it should change the Carrier and keep my settings so just reboot and it will change the details. Or have I got this wrong? Hopefully someone can assist.
What I am aiming for is to change the THREE boot ups, keep root and change to either VODAFONE or BTU, preferably without having to wipe the data but if I do I will have to. Just not sure which CSC to use and procedure to do this. Thanks in advance. . .
Hello,
I just bought a galaxy note 10+ N975F, but the bootloader is that of starwars on and off, and I don't like it at all. Is it possible to simply remove it permanently? (via Odin or other solution)
I have already tried several times to flash the last official XEF update (France) on it, but nothing can be done, it still remains.
Thanks for your help
silentdie said:
Hello,
I just bought a galaxy note 10+ N975F, but the bootloader is that of starwars on and off, and I don't like it at all. Is it possible to simply remove it permanently? (via Odin or other solution)
I have already tried several times to flash the last official XEF update (France) on it, but nothing can be done, it still remains.
Thanks for your help
Click to expand...
Click to collapse
Probably you need to unlock bootloader in order to change it (a file inside the BL partition must be edited) unless a firmware for other region comes with a different boot-splash if someone else can confirm that.
Thank you. Normally the XEF ROM stock does not have a starwars boot loader. I am currently stuck on the NEE firmware, even by flashing the XEF 5 times in a row it remains on: NEE/NEE/NEE/NEE. So if I understood correctly if I root my phone and try to flash the XEF again, will it be good? Thanks
silentdie said:
Thank you. Normally the XEF ROM stock does not have a starwars boot loader. I am currently stuck on the NEE firmware, even by flashing the XEF 5 times in a row it remains on: NEE/NEE/NEE/NEE. So if I understood correctly if I root my phone and try to flash the XEF again, will it be good? Thanks
Click to expand...
Click to collapse
Well, in case you are sure that flashing other different firmware it will solve the issue, you don't need to root it or unlock it, official firmware can be flashed normally, you have to choose from inside the CSC different from the CSC_HOME, this will wipe some preferences and will be a fresh start.
It could be also that the XEF firmware contains the same boot splash animation, probably I can check it if you can upload in some place the file param.bin.lz4 that is inside the BL partition file that you'll find from inside your firmware.
Just thinking, is not from the carrier?