Realme x2 (rmx1993) hard brick, asking for help - Realme X2 Questions & Answers

hi, i'll try to be clear despite my english isn't so good. I unlocked/rooted and installed lineage without any issue, later i decided to rollback to stock, so i flashed thought twrp recovery the lastest original Ozip firmware, wipe format and...locked the bootloader. Well now started the struggle, my phone can't go in fastbot mode, bootloader mode or recovery, i can only go on EDL mode.
I read tons of guides, watched tutorial video about unbrick with QPST, EEMC DL TOOL, MsmDownloadTool and QFIL Tool, and despite i got my phone full recognized in widows on EDL mode, i can't flash anything becouse i need firehose programmer file ( mbn) and/or rawprogram file and patch0.xml
So i looked for em everywhere online with no luck, i read also any device with 730g snapdragon could work too. I tried also to decompress Ozip with 7zip but there is nothing uselfull inside.
Being days and no luck, i apprecciate any help and suggestions, thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Bricked Asus Z00ED (missing boot.img)

I am suing TWRP for my phone and i am doing a reset to stock ROM and my phone had been stucked on Asus white logo. I read on some forum that some boot.img had been corrupted, can anyone upload the proper boot.img and other image i need to make my phone boot again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note : Sorry if this is unclear i am typing this in a hurry. I will update this post again. Thanks!
Since you obviously don't know much about Android phones, the simplest way for you to fix this is probably via ASUS Flash tool. There are guides on how to do that here on XDA.
Shad0wKn1ght93 said:
Since you obviously don't know much about Android phones, the simplest way for you to fix this is probably via ASUS Flash tool. There are guides on how to do that here on XDA.
Click to expand...
Click to collapse
i used adb fastboot tool and what other tools i should use? I also downloaded the firmware for Z00ED and stock ROM from asus what else did i missed? Thanks
Update : Here is my device info. Also, i cant access the oem recovery in fastboot

Please asus zenfone 2 bricked not working

The fastboot mode does not only enter black screen, nor download mode, I already tried to reinstall the fastboot by that program there but only of that error and never install, it is not recognized in the asus flash tools because the fastboot does not work, it is a brick already, I'm almost considering lost because I've seen all xda and all youtube and nothing works, rarely does it call and appear the ASUS logo and stay in it forever
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

			
				
Felipe Oliveira said:
The fastboot mode does not only enter black screen, nor download mode, I already tried to reinstall the fastboot by that program there but only of that error and never install, it is not recognized in the asus flash tools because the fastboot does not work, it is a brick already, I'm almost considering lost because I've seen all xda and all youtube and nothing works, rarely does it call and appear the ASUS logo and stay in it forever[IMG="ERROR FLASH FASTBOOT"]https://drive.google.com/file/d/1eFOVVy8U6KKC0ulLZVIPxlLoHlhQmVvH/view?usp=sharing
Click to expand...
Click to collapse
hi buddy, check out this thorough guide on how to unbrick your phone, instructions are very easy and well explained, hope you unbrick your phone asasp
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785

[Hard Brick] My cell stuck in hard brick.

Hi, 2 hours ago, I just unlocked boot loader.
But, I didn't know how to upload custom rom in that state, I think I used wrong code.
My cell worked till I used the code below.
fastboot oem unlock
fastboot flash abl_a
But, after that, I just spontaneously used the code below to upload custom rom..... (Why did I... sighhh)
fastboot flash abl_b
After I used the code, My computer can't read my cell and I cant also enter the fastboot mode.
Whenever I press any buttons on my cell, the only thing that I can see is this picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need your help guys. Thank u~
here you go
[Guide - HOW TO] Recover LG G7 (or other newer LG phones) from EDL or 9008 mode.
****** Unbrick all LG G7 models ****** ********** This guide has updated into two methods ********** (i). Recover from any boot problem to system or download mode.(which is defined below) This...
forum.xda-developers.com

OST tool Error 0xC6DA

So I think I ****ed up big times. I got techmesto to unlock the bootloader for my Nokia 6.1 & everything was working. Then when installing TWRP I accidentaly wiped the system, because TWRP was saying I have no OS.
Now I'm trying to flash a stock rom back onto the phone with OST 6.2.8 and I get the following error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the firmware I'm trying to flash:
PL2-347C-0-00CN-B04
I also tried out these:
PL2-415C-0-00WW-B01
PL2-130B-0-00WW-B02
Am I using the wrong firmware? Where do I find the right one? Any help will be greatly appreciated.
I'm getting the same error did you find any fix??
Hey man,
the guy (can't recall his name atm) from TechMesto helped me.
I bought his service to originally unlock the phone & then I messed up some steps & that is how I got the error from above. In the end I asked him about this error & he was able to solve it.
Maybe try contacting him & explain your situation, I told him I would send recommend him to anybody. That is the Mail we communicated trough:
[email protected]

My phone got Hardbricked while trying to reinstall the stock ROM from MSM tools.

I got a T-Mobile 7T that I converted to Global with the help of several guides in here, and everything was working ok. I rooted and flashed a custom kernel to OOS and was happy, but I wanted to try the new Android 11 update, but I wasn't sure if uninstalling Magisk and flashing the stock boot image would it be enough to flash the new update without issues, so I decided to flash the stock global ROM as clean as possible, and I used the MSM tools of the latest version: 10.0.16.HD65AA.
At the moment of putting the phone onto EDL mode and preparing to flash the stock ROM, I clicked start as my phone got recognized, but I ran into an error while flashing, which was saying something like "tgr id error" or something like that.
The phone turned off and bricked, I have no access to fastboot nor EDL, and the worst part is that now my PC doesn't recognize the phone now when I plug it in, so now I can't use othe MSM tool and try to flash stock again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to reinstall qualcomm usb 9008 drivers or another PC or another usb cable/port

Categories

Resources