Related
A couple days ago, I was browsing the internet, then my Nexus 7 2013 suddenly froze. I did a reboot, but it got stuck on the boot animation. So, since it wasn't booting back up, I tried to load from one of my old backups. I managed to get the back up to work, however I needed to download the 4.4.2 update OTA through TWRP. It never officially said it finished, but I restarted the tablet and it's been stuck on the Google screen. I've went to fastboot, but it wont let me into TWRP recovery since it only loads the Google screen. I've also tried this ( http://www.androidbeat.com/2013/11/flash-factory-image-nexus-device/#.U0o0z3nn_0x ) and it didn't work.
When I try to reset through WugFresh, I've flashed KRT16S 4.4 and KOT49H 4.4.2, and and I get
Code:
sending 'bootloader' (3911 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.001s
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.638s
archive does not contain 'boot.sig'
error: out of memory
I've also tried a few other ways of restoring to factory settings but nothing has worked :crying:
Any help is much appreciated!
I deleted my OS on my nexus... Oops? what I did is I did a ADB Sideload custom rom but if you can't get into twrp you are screwed. Maybe send it to Asus or return it if it is under warranty and get a new one. Just remember don't listen to me, in just a child on a tablet at night trying to unpack full posting privileges.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Any other suggestions..?
Couldn't you go into your bootloader, erase your recovery using ADB, and then flash it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
codemonkey98 said:
Couldn't you go into your bootloader, erase your recovery using ADB, and then flash it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I don't think I've tried that yet. Do you have a link on how to do it? I'm not all that experienced...
PieceofSlice said:
I don't think I've tried that yet. Do you have a link on how to do it? I'm not all that experienced...
Click to expand...
Click to collapse
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.
codemonkey98 said:
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.
Click to expand...
Click to collapse
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?
PieceofSlice said:
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?
Click to expand...
Click to collapse
Yes you will need to replace by the "bootloader-grouper-3.34.img" by the name of the img in your device archive.
For my Razorg / deb (The LTE version) it will be :
Code:
fastboot flash bootloader bootloader-deb-04.02.img
and
Code:
fastboot -w update image-razorg-kot49h.zip
And for the Razor / flo (Wifi version) it will be :
Code:
fastboot flash bootloader bootloader-flo-flo-04.02.img
and
Code:
fastboot -w update image-razor-kot49h.zip
For reminder, factory images can be found there : https://developers.google.com/android/nexus/images?hl=FR#razor
Debugging mode / ADB is not nessesary until you write the bootloader in fastboot mode
But don't forget to install drivers, except if you already do this step
I hope i helped you.
PieceofSlice said:
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?
Click to expand...
Click to collapse
You mustn't flash grouper bootloader on flo/deb!
Only the bootloader that belongs to your firmware.
Yet I'm not sure if your USB driver is installed properly.
Are you 100% sure it is?
that link is great!...
Don't worry you are not screwed...just follow the link the person above posted about how to hard reset your nexus device. Since you have a 2013 nexus just make sure that you download the correct nexus image and make sure you flash the correct files and you will be fine. I have used that same tutorial on my nexus 7 2013 flo and deb to fix issues.
Trust me it will work...
-droidshadow
codemonkey98 said:
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.
Click to expand...
Click to collapse
When following the tutorial, I type in "fastboot erase boot." However, when I do that it gives me this error...
Code:
C:\android-sdk\platform-tools>fastboot devices
04988e98 fastboot
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
I have the SDK installed correctly and everything in the correct spot, right?
PieceofSlice said:
When following the tutorial, I type in "fastboot erase boot." However, when I do that it gives me this error...
Code:
C:\android-sdk\platform-tools>fastboot devices
04988e98 fastboot
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
I have the SDK installed correctly and everything in the correct spot, right?
Click to expand...
Click to collapse
The files in folder look fine now
Did you update your SDK manager to the newest version? (Especially sources regarding API 18 and 19 are important). Move the firmware files elsewhere before, because by major updates whole platform-tools folder will be replaced.
Try to use different USB port on your PC. Once when you are in fastboot mode, does this command work?
Code:
fastboot reboot-bootloader
tetakpatalked from Nexus 7
Well, just my 2 cents... I read somewhere else on this forum from someone having the same issue that replacing the cable he used actually did the trick for him. You might try that. Won't hurt..
tetakpatak said:
The files in folder look fine now
Did you update your SDK manager to the newest version? (Especially sources regarding API 18 and 19 are important). Move the firmware files elsewhere before, because by major updates whole platform-tools folder will be replaced.
Try to use different USB port on your PC. Once when you are in fastboot mode, does this command work?
Code:
fastboot reboot-bootloader
tetakpatalked from Nexus 7
Click to expand...
Click to collapse
I haven't updated the SDK. So when I do, just be sure to move the image files and whatnot, and then put them back after the update, correct?
I'll be doing this later
PieceofSlice said:
I haven't updated the SDK. So when I do, just be sure to move the image files and whatnot, and then put them back after the update, correct?
I'll be doing this later
Click to expand...
Click to collapse
Yes just move your firmware files (bootloader and image.zip) out of the folder.
Updating is easy, double-click SDK manager application (you will see it as soon as you open SDK folder) and there you can choose what to update. You just need an internet connection.
tetakpatalked from Nexus 7
i am intrigued to see if this person was able to fix his tablet...
I think that all the suggestions above are very good ones. Making sure he has the most updated software...
Make sure he tries another usb cable or make sure you are using the stock usb cable.
And trying another usb port...
However from this fastboot devices output it did show that his device was connected which i don't think would happen with a default usb cable.
Okay so here is what i think may be causing the problem.
I think you need to unlock your bootloader before you can erase it. Try following this tutorial -> http://forum.xda-developers.com/showthread.php?t=1907796
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
If that does not work then try flashing the new bootloader over the old one.
I hope this has been helpful.
Don't give up...
-droidshadow
LOL, good point @droidshadow!
Hey, @PieceofSlice, is your bootloader possibly still locked? Please make photo of the text in bootloader mode on bottom left and post screenshot of it.
tetakpatalked from Nexus 7
droidshadow said:
i am intrigued to see if this person was able to fix his tablet...
I think you need to unlock your bootloader before you can erase it. Try following this tutorial -> http://forum.xda-developers.com/showthread.php?t=1907796
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
-droidshadow
Click to expand...
Click to collapse
I'm pretty sure my bootloader is unlocked, my tablet has the unlocked padlock at the Google screen. I'll take your advice and try a new cord too
droidshadow said:
i am intrigued to see if this person was able to fix his tablet...
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
If that does not work then try flashing the new bootloader over the old one.
-droidshadow
Click to expand...
Click to collapse
So I actually tried to do this because, even though I updated the Android SDK, when I typed in "fastboot erase boot", it basically froze on "erasing bootloader." When I tried the first command, "adb reboot-bootloader", it said
Code:
C:\android-sdk\platform-tools>adb reboot-bootloader
error: device not found
So I take it I have a problem with ADB or something?
There are two generally different modes by using Android Debugging Bridge:
1. ADB (device booted in OS or recovery)
2. FASTBOOT (device in bootloader mode)
When I tried the first command, "adb reboot-bootloader", it said
Code:
C:\android-sdk\platform-tools>adb reboot-bootloader
error: device not found
So I take it I have a problem with ADB or something?
Click to expand...
Click to collapse
So, if you have tried this command above when your device was in bootloader mode, it was wrong command, as the command should have started with "fastboot...." instead of "adb..."
If the device was booted in OS, this command would have been correct and such response could have two reasons:
* USB debugging was not enabled
* drivers are not installed properly
After updating SDK manager, it is always highly recommended to check if the driver still works.
PieceofSlice said:
when I typed in "fastboot erase boot", it basically froze on "erasing bootloader."
Click to expand...
Click to collapse
Careful, mate, I hope you didn't try to erase your bootloader? That would have fatal results. Actually "boot" means kernel! As long as your bootloader is there = your tab will be fine.
By flashing a factory image the order of doing things is
* erase all (kernel, system, userdata etc)
* flash new bootloader
* reboot bootloader
* flashing whole factory image zip file
tetakpatalked from Nexus 7
Hi folks.
I'm trying to root my phone (ZE551ML - 2.83Ghz and 4Gb Ram) with method 3 in this thread (Using Ubuntu 14.04.1 with installed ADB 1.0.32 and android-tools-fastboot) but the script Root.sh gives me this error:
./adb.mac: 1: ./adb.mac: Syntax error: ")" unexpected
And the script is not rooting the phone.
Then i tryed to do things manually and observed that after i hit the 'adb reboot bootloader' (so i can flash the files like the script would do) the phone reboots into fastboot mode but the 'adb devices' or 'fastboot devices' didnt show my phone anymore - or anything.
Tried to do the same with phone in recovery mode and got the same result.
Can anyone help me?
Did I miss anything?
Ps. My Bootloader is locked and i have no intention of unlocking it yet.
C-Ph87 said:
Hi folks.
I'm trying to root my phone (ZE551ML - 2.83Ghz and 4Gb Ram) with method 3 in this thread (Using Ubuntu 14.04.1 with installed ADB 1.0.32 and android-tools-fastboot) but the script Root.sh gives me this error:
./adb.mac: 1: ./adb.mac: Syntax error: ")" unexpected
And the script is not rooting the phone.
Then i tryed to do things manually and observed that after i hit the 'adb reboot bootloader' (so i can flash the files like the script would do) the phone reboots into fastboot mode but the 'adb devices' or 'fastboot devices' didnt show my phone anymore - or anything.
Tried to do the same with phone in recovery mode and got the same result.
Can anyone help me?
Did I miss anything?
Ps. My Bootloader is locked and i have no intention of unlocking it yet.
Click to expand...
Click to collapse
Are you using root command prompt on your pc? You need admin privileges on pc.
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
Are you using root command prompt on your pc? You need admin privileges on pc.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Yes. Using 'sudo fastboot devices' nothing happens.
C-Ph87 said:
Yes. Using 'sudo fastboot devices' nothing happens.
Click to expand...
Click to collapse
http://www.asus.com/zentalk/thread-76656-1-1.html
geopit said:
http://www.asus.com/zentalk/thread-76656-1-1.html
Click to expand...
Click to collapse
The comands in the Python Script are:
adb reboot bootloader
fastboot flash /system/bin/resize2fs magic
fastboot flash /system/bin/tune2fs busybox
fastboot flash /system/bin/partlink supersu.tgz
fastboot oem start_partitioning
fastboot flash /system/bin/logcat installer
fastboot oem stop_partitioning
The thing is that fastboot doesnt recognize my device after the 'adb reboot bootloader' and the message 'waiting for the device' gets stuck.
If you look into the thread you'll see that the 7th answer (user orlapalm) has the same unsolved issue.
Guess the solution is used somebody elses PC with Windows since there's no way to use Ubuntu on This phone.
Try this:
Code:
#!/bin/bash
adb reboot bootloader
fastboot flash /system/bin/resize2fs magic
fastboot flash /system/bin/tune2fs busybox
fastboot flash /system/bin/partlink supersu.tgz
fastboot oem start_partitioning
fastboot flash /system/bin/logcat installer
fastboot oem stop_partitioning
Save as root.sh and try again.
Sent from my ASUS_Z00A using XDA Labs
krasCGQ said:
Try this:
Code:
#!/bin/bash
adb reboot bootloader
fastboot flash /system/bin/resize2fs magic
fastboot flash /system/bin/tune2fs busybox
fastboot flash /system/bin/partlink supersu.tgz
fastboot oem start_partitioning
fastboot flash /system/bin/logcat installer
fastboot oem stop_partitioning
Save as root.sh and try again.
Sent from my ASUS_Z00A using XDA Labs
Click to expand...
Click to collapse
Thanks but will not work.
I know how a script works but seems that Zf2 needs the Fasboot v1.0.32 - Witch i dont find anywhere.
Fastboot v1.0.31 (installed with apt-get install android-tools-fastboot) doesnt recognize the Zenfone 2 on Ubuntu.
Maybe because the USB device is not recognized, what does lsusb say before and after the reboot in bootloader?
Magister54 said:
Maybe because the USB device is not recognized, what does lsusb say before and after the reboot in bootloader?
Click to expand...
Click to collapse
lsusb (before reboot)
Bus 001 Device 004: ID 0b05:5601 ASUSTek Computer, Inc.
lsusb (after reboot)
Bus 001 Device 006: ID 0b05:4daf ASUSTek Computer, Inc. Transformer Pad Infinity TF700 (Fastboot)
Fastboot cmds:
~$ fastboot continue
< waiting for device >
~$ fastboot reboot
< waiting for device >
Ps. After this I saw that device code is different after (0b05:4daf) and before (0b05:5601) reboot so i added the permission for this 'new dvice' in /etc/udev/rules.d/51-android.rules and now fastboot seems to recognize my phone.
Magister54 said:
Maybe because the USB device is not recognized, what does lsusb say before and after the reboot in bootloader?
Click to expand...
Click to collapse
Thank you very much for the tip, man!
Without it i would never solved this situation!
C-Ph87 said:
Thank you very much for the tip, man!
Without it i would never solved this situation!
Click to expand...
Click to collapse
No problem :highfive:
Hi everyone ! (I apologyze for my english)
I cant flash anything on my Pixel C because of this:
C:\Users\ykant\Desktop\Minimal ADB and Fastboot>fastboot flash recovery TWRP_dragon_3.0.2-23.img
target reported max download size of 268435456 bytes
erasing 'recovery'...
FAILED (remote: unsupported command)
finished. total time: -0.000s
Click to expand...
Click to collapse
No system to boot on and my TWRP is wiped !!
--> Cant do this:
fwtool vbnv write dev_boot_fastboot_full_cap 1
Click to expand...
Click to collapse
Is my pixel C bricked now ?
regards !
Did you unlock your device first with "fastboot oem unlock"?
redukt said:
Did you unlock your device first with "fastboot oem unlock"?
Click to expand...
Click to collapse
Yes i did this before, i was running on Remix OS
I don't know if this is of relevance but there were new fastboot commands introduced from Android M (?) and I have recollection about "partial unlock" - two flags required to be set and if only one was set it could be reported that the bootloader was unlocked but fastboot saw it as locked. Above may be totally wrong.
Here's the difference between old and current fastboot commands. Note the new lock/unlock commands
Code:
************************ OLD **************************************
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
************************ NEW **************************************
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> Reflash device from update.zip.
Sets the flashed slot as active.
flashall Flash boot, system, vendor, and --
if found -- recovery. If the device
supports slots, the slot that has
been flashed to is set as active.
Secondary images may be flashed to
an inactive slot.
flash <partition> [ <filename> ] Write a file to a flash partition.
flashing lock Locks the device. Prevents flashing.
flashing unlock Unlocks the device. Allows flashing
any partition except
bootloader-related partitions.
flashing lock_critical Prevents flashing bootloader-related
partitions.
flashing unlock_critical Enables flashing bootloader-related
partitions.
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked.
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce.
flashing unlock_bootloader <request> Issue unlock bootloader using request.
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback.
erase <partition> Erase a flash partition.
format[:[<fs type>][:[<size>]] <partition>
Format a flash partition. Can
override the fs type and/or size
the bootloader reports.
getvar <variable> Display a bootloader variable.
set_active <slot> Sets the active slot. If slots are
not supported, this does nothing.
boot <kernel> [ <ramdisk> [ <second> ] ] Download and boot kernel.
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ]
Create bootimage and flash it.
devices [-l] List all connected devices [with
device paths].
continue Continue with autoboot.
reboot [bootloader] Reboot device [into bootloader].
reboot-bootloader Reboot device into bootloader.
help Show this help message.
-Yazh- said:
Hi everyone ! (I apologyze for my english)
I cant flash anything on my Pixel C because of this:
C:\Users\ykant\Desktop\Minimal ADB and Fastboot>fastboot flash recovery TWRP_dragon_3.0.2-23.img
target reported max download size of 268435456 bytes
erasing 'recovery'...
FAILED (remote: unsupported command)
finished. total time: -0.000s
Click to expand...
Click to collapse
No system to boot on and my TWRP is wiped !!
--> Cant do this:
fwtool vbnv write dev_boot_fastboot_full_cap 1
Click to expand...
Click to collapse
Is my pixel C bricked now ?
regards !
Click to expand...
Click to collapse
Hi, I'm just wondering if you were able to fix your tablet. I ran into the same problem as you here and am not able to find a solution to it.
Hi !!
Sorry for bad news, but i didn't found any solution since my Pixel C was bricked. Maybe there is a solution, but I dropped it before finding it.
I hope you find something to fix it !
@viii_xvi Are you using "Minimal ADB and Fastboot" as shown in the post you quoted by -Yazh- ? The current (?) version that I can find is 1.4.3 and that looks to be "2015".
For the current versions of adb and fastboot and the revision history, 12 since October 2016, see https://developer.android.com/studio/releases/platform-tools.html
peterk-1 said:
Are you using "Minimal ADB and Fastboot" as shown in the post you quoted by -Yazh- ? The current (?) version that I can find is 1.4.3 and that looks to be "2015".
Click to expand...
Click to collapse
No. I used the 15 second ADB and Fastboot installer. I'm pretty sure it works fine as I can use fastboot commands.
peterk-1 said:
For the current versions of adb and fastboot and the revision history, 12 since October 2016, see https://developer.android.com/studio/releases/platform-tools.html
Click to expand...
Click to collapse
I don't really know what to do with the files found in the zip. If I'm doing it wrong, can you tell me what I should be doing?
viii_xvi said:
No. I used the 15 second ADB and Fastboot installer. I'm pretty sure it works fine as I can use fastboot commands.
I don't really know what to do with the files found in the zip. If I'm doing it wrong, can you tell me what I should be doing?
Click to expand...
Click to collapse
There are Youtube videos on installing Android Platform Tools and a web search for installing Android Platform Tools with your o/s will find many hits. You need to know you are installing just the platform tools - some of the guides assume you are installing or have installed the full Android Software Development Kit (SDK).
Assuming you are using Windows then the simplest method is to copy the contents of the zip file into the current location of your "15 second" files. This ensures that you can run the new version of fastboot with the folder path you have used previously. In file manager "find" fastboot.exe and that will give you the folder to unzip ALL of the platform tools files. You will know if you have done it correctly if you get requests to overwrite existing files when you unzip the files.
peterk-1 said:
There are Youtube videos on installing Android Platform Tools and a web search for installing Android Platform Tools with your o/s will find many hits. You need to know you are installing just the platform tools - some of the guides assume you are installing or have installed the full Android Software Development Kit (SDK).
Assuming you are using Windows then the simplest method is to copy the contents of the zip file into the current location of your "15 second" files. This ensures that you can run the new version of fastboot with the folder path you have used previously. In file manager "find" fastboot.exe and that will give you the folder to unzip ALL of the platform tools files. You will know if you have done it correctly if you get requests to overwrite existing files when you unzip the files.
Click to expand...
Click to collapse
I've followed the instructions so I'm confident I did it correctly. Despite this, nothing has improved. I still can't flash the stock ROM or a custom recovery in fastboot.
What I've noticed from updating the fastboot version are some new commands I found when I entered "fastboot -h"
Code:
fastboot -h
commands:
reboot [bootloader|emergency]
stage <infile>
get_staged <outfile>
options:
--skip-secondary
--skip-reboot
--disable-verity
--disable-verification
--unbuffered
--version
From what I've tried, all the commands in options returns
fastboot: usage: no command
Click to expand...
Click to collapse
viii_xvi said:
I've followed the instructions so I'm confident I did it correctly. Despite this, nothing has improved. I still can't flash the stock ROM or a custom recovery in fastboot.
What I've noticed from updating the fastboot version are some new commands I found when I entered "fastboot -h"
Code:
fastboot -h
commands:
reboot [bootloader|emergency]
stage <infile>
get_staged <outfile>
options:
--skip-secondary
--skip-reboot
--disable-verity
--disable-verification
--unbuffered
--version
From what I've tried, all the commands in options returns
Click to expand...
Click to collapse
Hi, Did you tried to flash with the oldest stock rom of the pixel C ? Because it uses older version of fastboot so maybe it will work. I has also the same problem as you but hopefully twrp still worked so i could flash another system image.
rhmanoa said:
Hi, Did you tried to flash with the oldest stock rom of the pixel C ? Because it uses older version of fastboot so maybe it will work. I has also the same problem as you but hopefully twrp still worked so i could flash another system image.
Click to expand...
Click to collapse
I have now tried to flash the earliest factory image and am disappointed to say the bootloader did not flash and so I wasn't able to complete the flashing.
I don't think the problem is the fastboot version. It may be the bootloader itself. I've read someone describe this problem as "Broken fastboot (bootloader) security." I think the problem is that, when unlocked, the bootloader would return the same messages as if it was locked. The security of the bootloader still thinks it's locked and not allow flashing of any images. Also that locking and reunlocking does not improve the situation. This would explain why, when bootloader is unlocked, I get "remote: unsupported command" and "remote: image verification failed", the same as when I try the same commands when the bootloader is locked.
viii_xvi said:
I have now tried to flash the earliest factory image and am disappointed to say the bootloader did not flash and so I wasn't able to complete the flashing.
I don't think the problem is the fastboot version. It may be the bootloader itself. I've read someone describe this problem as "Broken fastboot (bootloader) security." I think the problem is that, when unlocked, the bootloader would return the same messages as if it was locked. The security of the bootloader still thinks it's locked and not allow flashing of any images. Also that locking and reunlocking does not improve the situation. This would explain why, when bootloader is unlocked, I get "remote: unsupported command" and "remote: image verification failed", the same as when I try the same commands when the bootloader is locked.
Click to expand...
Click to collapse
Just bought today, same issue, have you solved it?
mansonstein said:
Just bought today, same issue, have you solved it?
Click to expand...
Click to collapse
No, I didn't manage to fix it.
did you found a solution yet？
I got a same problem,cant flash anything but ordinary using.
I got the problem caused by flashed twrp3.2.3,cant get into system,just always get into twrp.
cant flash any official firmware with "flash-all.bat",no matter which platform tool or firmware.but the twrp were installed before can flash anything.
finally,I flashed newest OTA firmware,then device can be booted. but got the unsupported command
richardwia said:
did you found a solution yet？
I got a same problem,cant flash anything but ordinary using.
I got the problem caused by flashed twrp3.2.3,cant get into system,just always get into twrp.
cant flash any official firmware with "flash-all.bat",no matter which platform tool or firmware.but the twrp were installed before can flash anything.
finally,I flashed newest OTA firmware,then device can be booted. but got the unsupported command
Click to expand...
Click to collapse
I'm assuming you have the latest version of TWRP installed. IIRC, there should be "Fix Fastboot" in advanced options. If indeed you have the same problem I had, pressing this should fix the problem. I don't know anything beyond this as I never got to find out what happens afterwards.
viii_xvi said:
I'm assuming you have the latest version of TWRP installed. IIRC, there should be "Fix Fastboot" in advanced options. If indeed you have the same problem I had, pressing this should fix the problem. I don't know anything beyond this as I never got to find out what happens afterwards.
Click to expand...
Click to collapse
really？where I can find the“fix fastboot in advanced options”？
richardwia said:
really？where I can find the“fix fastboot in advanced options”？
Click to expand...
Click to collapse
I believe I'm not qualified to help you as I disposed of my tablet months ago. All the advice I've given is off of memory and may not be accurate. That being said, I won't help you anymore in fear of giving inaccurate information that may lead to bricking of your tablet.
I have a pixel C, flashed with latest 3-rd pixel experience before, someday i tried to flash back to factory image, hit the same trouble like this topic, i came here several times before, no solution, today, i found another article about this , it's solved my trouble.
sorry i am new here, i couldn't share the outside article link.
would like to share what i did on my pixel c.
1. root your pixel c
2. adb shell //this command could be executed under recovery mode too.
3. su
4. fwtool vbnv write dev_boot_fastboot_full_cap 1
5. adb reboot fastboot
then you could flash anything you want.
I had this just now - I finally got fed up of my Pixel C being so laggy and also chrome opening up as blank pages (I switched to brace to fix this, but it's abit crashy).
Anyhow I found that after
adb reboot bootloader
that
fastboot flash recovery twrp.img
was failing for me in the "Writing" stage
I discovered that the fix was to use
adb flashing unlock
then it will ask you a question (power button to confirm and one of teh volume keys to cancel).
after this it spins with erasing for a while and then comes back to fastboot after which
fastboot flash recovery twrp.img
Worked, after this you get an annoying 30s delay for each restart, I think that can be fixed by
adb flashing lock
I'll verify this when I've finished flashing a usable ROM to my Pixel C...
I cant flash everything on fastboot mode
i have usb enabled and bootloader unlocked latest
status: Bootloop, no recovery
only fastboot mode
help for a fix ... I bricked the tab
TRIED TO RETURN TO STOCK WITH FLASH ALL.BAT BUT ALL PARTITIONS END WITH UNKNOWN COMMAND
help i paid 700 $ for this tab ... i can reboot anduse fastboot mode... bootloader unlocked
Alessandro999 said:
help i paid 700 $ for this tab ... i can reboot anduse fastboot mode... bootloader unlocked
Click to expand...
Click to collapse
Are you using the latest FASTBOOT.exe?
Can you screenshot the CMD?
unknown commands usually indicate an error in the command not the execution of the command.
parakleet said:
Are you using the latest FASTBOOT.exe?
Can you screenshot the CMD?
unknown commands usually indicate an error in the command not the execution of the command.
Click to expand...
Click to collapse
i have fixed!!! just relock the bootloader... waiting for delete and erasing.... unlock the bbotloader and waiting for esasing
now can flash all i want
Alessandro999 said:
i have fixed!!! just relock the bootloader... waiting for delete and erasing.... unlock the bbotloader and waiting for esasing
now can flash all i want
Click to expand...
Click to collapse
Good job
So when I got this device I went to root it and found there's not very good documentation on what to do to get root and recovery installed so after many boot loops and reinstall of firmware here is what I did to gain root and TWRP and have a stable environment. You will need to use ADB & Fastboot commands please install either this : https://forum.xda-developers.com/showthread.php?t=2317790 or https://forum.xda-developers.com/showthread.php?t=2588979 or you can install from here: https://developer.android.com/studio/releases/platform-tools. you will also need the Motorola drivers located here: https://support.motorola.com/us/en/solution/MS88481. Once you have obtained these you can proceed with the bootloader unlock. I have the unlocked version of the Motorola G7 Power so I was able to fallow the sets here: https://support.motorola.com/us/en/bootloader/unlockyourdeviceb. If you have a different variant I'm not sure if your able to unlock your bootloader please try and let me know in this thread. I AM NOT RESPONSIBLE IF YOU SCREW YOUR DEVICE UP OR FOR ANY DAMAGE TO YOUR DEVICE
Bootloader unlock steps:
1. On your device go to Settings and to System, Then About phone and click " Build Number " until you unlock developer options.
2. Back out one step and click the Advanced tab and then click " Developer Options ".
3. Once in developer options " OEM Unlocking " turn off " Automatic Updates " and enable "USB Debugging".
4. Once you have done USB Debugging open the start button type "CMD" and open a command prompt.
5. Once in command prompt type " adb devices " make sure you authorize the pc on the phone. then type in command prompt " adb reboot bootloader "
6. Once in bootloader type in command prompt " fastboot oem get_unlock_data " from here fallow the directions on the Motorola Bootloader Unlocking page: https://support.motorola.com/us/en/bootloader/unlockyourdevice
7. Take the number given to you by Motorola and type in command prompt " fastboot oem unlock CODE FROM MOTO " then enter the same command again and your device will be bootloader unlocked.
TWRP & Magisk install:
This is where I found it to be difficult to get things right either I would bootloop or I wouldn't be able to unencrypt my sd card in TWRP so I couldn't read things right all sorts of dumb issues. All the files I used are attached so please let me know if this works as well as it did for me. Please download the TWRP .img file it was too large to attach: https://dl.twrp.me/ocean/ Also make sure that your command prompt is in the directory of your stored files.
Here are a list of commands to get TWRP and install Root please be in bootloader mode to start this process.
1. fastboot boot twrp-3.3.1-2-ocean.img
2. In TWRP go to the wipe option and select the format and type " yes " once it has done that go back to the main TWRP page by hitting the home bottom and select Reboot and select Reboot Bootloader.
3. fastboot boot twrp-3.3.1-2-ocean.img
4. Once in TWRP adb push twrp-installer-3.3.1-2-ocean.zip /tmp/ then click install and navigate to the /tmp folder and install the TWRP .zip file
5. After you install TWRP do this : adb push Magisk-v20.1(20100).zip /tmp/ then navigate to your /tmp folder and install Magisk .zip file
6. After you install magisk you can reboot the system and let it sit it might loop once or twice but it will boot. I did the force encrypt disable with the attached zip file then i rebooted.
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Well i messed it up some how. my phone would boot loop three times and then go back to the twrp screen. after 30 minutes of messing with it i gave up and factory reset it via the adb platform tools.
Got it to work but had to start fresh as said at very bottom using retus version, I did all that then step by step but i booted once just to enable usb debugging of course, already had oem unlock but then right back into recovery flashed magisk and disable dm verity both back to back before reboot and all went fine cant get ota ofc but surely better roms will start showing up soon and I wont give a crap about stock anymore.
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
toxinburn said:
Got it to work but had to start fresh as said at very bottom using retus version, I did all that then step by step but i booted once just to enable usb debugging of course, already had oem unlock but then right back into recovery flashed magisk and disable dm verity both back to back before reboot and all went fine cant get ota ofc but surely better roms will start showing up soon and I wont give a crap about stock anymore.
Click to expand...
Click to collapse
I am gonna check one thing I had it all working another method before but after installing something thru magisk it soft bricked I think it was vanced youtube maybe also cant seem to find a way to get vipre to work sadly.
Question
Does this method bypass the screen lock password on the phone? I have this phone that is locked with a passcode, so I can't easily get it into developer mode. Sorry, I'm a total newbie to this but am trying to learn. Thanks in advance!
A tip for linux users. If you are getting "< waiting for any device >" after the "fastboot oem get_unlock_data". Ctrl-c to exit the command. Su to root and then "fastboot oem get_unlock_data".
I give up, SIM stopped working after multiple failed attempts at installing Custom ROMs, even so much as installing Magisk+force encrypt disable brings up Factory data reset screen. Now my SIM doesn't even work on another stock phone for some reason, since the ban that apparently exists, if applied, should be IMEI-only, and somehow it works on a Custom ROM+Magisk device of mine. Going back to stock with locked bootloader I guess
SIM stopped working on G7 Power = neither SIM from two different carriers, one that's never been on a rooted/unlocked bootloader phone, don't even show up as a grey signal icon, tried both slots.
My SIM not working on another stock phone (G7 Play) = not recognized at all, but at least it recognizes there's a SIM card in there, grey signal.
Working fine on G5 with Magisk, Xposed and OmniROM
So maybe I banned both the chip (?) and IMEI, but still for some reason it works on another bootloader unlocked phone
Hyoretsu said:
I give up, SIM stopped working after multiple failed attempts at installing Custom ROMs, even so much as installing Magisk+force encrypt disable brings up Factory data reset screen. Now my SIM doesn't even work on another stock phone for some reason, since the ban that apparently exists, if applied, should be IMEI-only, and somehow it works on a Custom ROM+Magisk device of mine. Going back to stock with locked bootloader I guess
SIM stopped working on G7 Power = neither SIM from two different carriers, one that's never been on a rooted/unlocked bootloader phone, don't even show up as a grey signal icon, tried both slots.
My SIM not working on another stock phone (G7 Play) = not recognized at all, but at least it recognizes there's a SIM card in there, grey signal.
Working fine on G5 with Magisk, Xposed and OmniROM
So maybe I banned both the chip (?) and IMEI, but still for some reason it works on another bootloader unlocked phone
Click to expand...
Click to collapse
From what I've been able to tell, the SIM cards are locked via IMEI (from MetroPCS I assume?, cause that's what they do), and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
I have an E5 Play, and unlocked it using the device unlock app built-in from MetroPCS, after 3 months of service (maybe 6 I forget). After that, I could throw in other SIMs. But the phones those SIMs would come out of, they couldn't read the metro card. They said invalid. But it still recognized it was a card, and showed phone number in settings. Said out of service.
After realizing this, I found out you can change devices in the website real quick, and that should solve the "invalid SIM" issue.
Possibly some custom ROMs lack what restricts all this in the first place, and the Sim must be valid because it's a SIM, in service, and the proper network. No clue there. What carrier are you on?
Linux-Lord said:
From what I've been able to tell, the SIM cards are locked via IMEI (from MetroPCS I assume?, cause that's what they do), and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
Click to expand...
Click to collapse
The thing is, "stopped working" literally, it doesn't have out of service, phone number, no signal, not even the "emergency calls only", heck I can't even find my IMEI in settings nor *#0606#, I think that's what's causing the problem. This SIM also came from that Custom ROM device (originally inserted there, but bought as a standalone data plan)
Linux-Lord said:
and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
Click to expand...
Click to collapse
If you're talking about how it showed up like that on the G7 Play it used to work just fine in there, and no, that's not the original phone, it's just a phone I used to test if my SIM was still working
Linux-Lord said:
I have an E5 Play, and unlocked it using the device unlock app built-in from MetroPCS, after 3 months of service (maybe 6 I forget). After that, I could throw in other SIMs. But the phones those SIMs would come out of, they couldn't read the metro card. They said invalid. But it still recognized it was a card, and showed phone number in settings. Said out of service.
Click to expand...
Click to collapse
In this phone, G7 Power, it doesn't even recognize a card is in the tray anymore (unlike the G7 Play which at least knows there's one and G5+Custom ROM, in which it works)
Linux-Lord said:
After realizing this, I found out you can change devices in the website real quick, and that should solve the "invalid SIM" issue.
Possibly some custom ROMs lack what restricts all this in the first place, and the Sim must be valid because it's a SIM, in service, and the proper network. No clue there. What carrier are you on?
Click to expand...
Click to collapse
Not that it's gonna help much but OI (Brazil), and if that's on Motorola support page my G7 Power is main phone already.
Is the force encrypt disable necessary? And what does it do?
So, I have successfully rooted my Moto G7 Power by using the method above, but i tried not doing the "format data" and fortunately, I have rooted my phone. For the 1st attempt, I kinda soft-bricked my device by doing the steps briefly, my phone would always bootloop back to recovery mode, but after not doing the "format data" step, it led to a success. So for anyone who are currently experiencing bootloop, flash the stock firmware to your phone and root it again by using the method above but don't do the "format data" step. (flashing the stock firmware would not re-lock the bootloader, so you can try to root your phone again easily.)
error
I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot> adb push magisk adb push Magisk-v20.1(20100).zip /tmp/
adb: error: cannot stat 'magisk': No such file or directory
adb: error: cannot stat 'adb': No such file or directory
adb: error: cannot stat 'push': No such file or directory
adb: error: cannot stat 'Magisk-v20.1(20100).zip': No such file or directory
---------- Post added at 08:07 AM ---------- Previous post was at 07:49 AM ----------
gladiatorbong said:
Well i messed it up some how. my phone would boot loop three times and then go back to the twrp screen. after 30 minutes of messing with it i gave up and factory reset it via the adb platform tools.
Click to expand...
Click to collapse
same here
brokenlocked22 said:
I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot> adb push magisk adb push Magisk-v20.1(20100).zip /tmp/
adb: error: cannot stat 'magisk': No such file or directory
adb: error: cannot stat 'adb': No such file or directory
adb: error: cannot stat 'push': No such file or directory
adb: error: cannot stat 'Magisk-v20.1(20100).zip': No such file or directory
Click to expand...
Click to collapse
I mean, that's entirely on you, the command is wrong. Remove the first 3 words. And check the name of your Magisk ZIP (and location)
Hyoretsu said:
I mean, that's entirely on you, the command is wrong. Remove the first 3 words. And check the name of your Magisk ZIP (and location)
Click to expand...
Click to collapse
same thing as always.. no matter what lol
brokenlocked22 said:
same thing as always.. no matter what lol
Click to expand...
Click to collapse
If it's same thing as always then you're still using "adb push magisk adb push Magisk-v20.1(20100).zip /tmp/". There's no "but I'm not", if it's indeed the same error as before you're messing up on the syntax. Make sure you've put Magisk inside Minimal ADB folder, rename it to magisk.zip and run "adb push magisk.zip /tmp/"
why is magisk pushed to tmp and not to internal storage . Why not just push magisk to internal sotrage and just install that way through twrp or that wont work. just wondering.
Anyone tried this on XT1955-4?
dirtyscout said:
So when I got this device I went to root it and found there's not very good documentation on what to do to get root and recovery installed so after many boot loops and reinstall of firmware here is what I did to gain root and TWRP and have a stable environment. You will need to use ADB & Fastboot commands please install either this : https://forum.xda-developers.com/showthread.php?t=2317790 or https://forum.xda-developers.com/showthread.php?t=2588979 or you can install from here: https://developer.android.com/studio/releases/platform-tools. you will also need the Motorola drivers located here: https://support.motorola.com/us/en/solution/MS88481. Once you have obtained these you can proceed with the bootloader unlock. I have the unlocked version of the Motorola G7 Power so I was able to fallow the sets here: https://support.motorola.com/us/en/bootloader/unlockyourdeviceb. If you have a different variant I'm not sure if your able to unlock your bootloader please try and let me know in this thread. I AM NOT RESPONSIBLE IF YOU SCREW YOUR DEVICE UP OR FOR ANY DAMAGE TO YOUR DEVICE
Bootloader unlock steps:
1. On your device go to Settings and to System, Then About phone and click " Build Number " until you unlock developer options.
2. Back out one step and click the Advanced tab and then click " Developer Options ".
3. Once in developer options " OEM Unlocking " turn off " Automatic Updates " and enable "USB Debugging".
4. Once you have done USB Debugging open the start button type "CMD" and open a command prompt.
5. Once in command prompt type " adb devices " make sure you authorize the pc on the phone. then type in command prompt " adb reboot bootloader "
6. Once in bootloader type in command prompt " fastboot oem get_unlock_data " from here fallow the directions on the Motorola Bootloader Unlocking page: https://support.motorola.com/us/en/bootloader/unlockyourdevice
7. Take the number given to you by Motorola and type in command prompt " fastboot oem unlock CODE FROM MOTO " then enter the same command again and your device will be bootloader unlocked.
TWRP & Magisk install:
This is where I found it to be difficult to get things right either I would bootloop or I wouldn't be able to unencrypt my sd card in TWRP so I couldn't read things right all sorts of dumb issues. All the files I used are attached so please let me know if this works as well as it did for me. Please download the TWRP .img file it was too large to attach: https://dl.twrp.me/ocean/ Also make sure that your command prompt is in the directory of your stored files.
Here are a list of commands to get TWRP and install Root please be in bootloader mode to start this process.
1. fastboot boot twrp-3.3.1-2-ocean.img
2. In TWRP go to the wipe option and select the format and type " yes " once it has done that go back to the main TWRP page by hitting the home bottom and select Reboot and select Reboot Bootloader.
3. fastboot boot twrp-3.3.1-2-ocean.img
4. Once in TWRP adb push twrp-installer-3.3.1-2-ocean.zip /tmp/ then click install and navigate to the /tmp folder and install the TWRP .zip file
5. After you install TWRP do this : adb push Magisk-v20.1(20100).zip /tmp/ then navigate to your /tmp folder and install Magisk .zip file
6. After you install magisk you can reboot the system and let it sit it might loop once or twice but it will boot. I did the force encrypt disable with the attached zip file then i rebooted.
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
IM a bit confused should I flash a fresh installed firmware first right after i unlock the boot loader?
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.
[Redacted]
Excellent guide, rooted my Moto G7 from Metro PCS.
brokenlocked22 said:
same thing as always.. no matter what lol
Click to expand...
Click to collapse
I LOVE IT!!! :good: