[ROM][OFFICIAL][RACER]Lineage OS 17.1 - Motorola Edge ROMs, Kernels, Recoveries, & Other D

[ROM][OFFICIAL][RACER]Lineage OS 17.1 - Motorola Edge ROMs, Kernels, Recoveries, & Other D

Reserved

Once i'll have the chance i'll try on my Moto Edge

I was literally gonna learn how to build my own ROM, but this is awesome!

Hey guys, is there anything not working or buggy with this build? I mean no disrespect, but need to know if I can use this as a daily driver.
Also, I have an unbranded (at least with regards to cellular providers) Motorola Edge XT2063-2 I bought from Best Buy unlocked. This should work with that, right?

erfanoabdi said:
Reserved
Click to expand...
Click to collapse
As ALWAYS, Thanks For YOUR Hard work Kid.....
Tef
*edit*
Thanks to everyone!

I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.

Ezekiel_devoid said:
I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.
Click to expand...
Click to collapse
Check yo PMa

Has anybody made at least an unofficial TWRP for this phone? I see the Edge+ has had a TWRP for the longest time that was built with the source from THIS phone... anybody??

ToolBoyNIN said:
Has anybody made at least an unofficial TWRP for this phone? I see the Edge+ has had a TWRP for the longest time that was built with the source from THIS phone... anybody??
Click to expand...
Click to collapse
Yes, we are still in testing with TWRP 3.5.0 img but no installer yet, o believe its on his Todo list...
There are 4-5 head Devs working with this device, but why go and build a bunch of 10 ROMs when we are awaiting the first 11 soak to drop any time...

shiboby said:
Hey guys, is there anything not working or buggy with this build? I mean no disrespect, but need to know if I can use this as a daily driver.
Also, I have an unbranded (at least with regards to cellular providers) Motorola Edge XT2063-2 I bought from Best Buy unlocked. This should work with that, right?
Click to expand...
Click to collapse
Absolutely, everything, seems almost flawless. yes, should work on ALL unlocked Edge 5G variants.

I need a better step by step to do this without a computer

Burtandrew8 said:
I need a better step by step to do this without a computer
Click to expand...
Click to collapse
Did u unlock bootloader? gonna need a PC for that at least...

Yeah it's unlocked an rooted

Installing LineageOS via TWRP
Attention! Installation was performed on clean Stock firmware installed in Slot A.
1. Necessary files for installation.
Spoiler
TWRP -3.5.0_10-0 install via fastboot with the command:
fastboot flash recovery twrp-3.5.0_10-0-racer.img
Download and copy to the SDCard:
- archive copy-partitions-20200903_1329.zip to copy from active slot A to inactive slot B the necessary partitions bootloader, logo, etc.
- ROM archive ;
- archive TWRP_Installer
- GApps archive. I made an archive to install GApps based on the installer from FlameGApps. The apps are updated on 01/27/21. The archive contains the following apps:
Spoiler
Android Migrate
Carrier Setup
Config Updater
GMS Core (GMS)
GMS Core Setup
Google Ext Shared
Google Ext Services
Google Services Framework
Google Calendar Sync Adapter
Google Backup Transport
Google Clock
Google Calculator
Google Calendar
Google Contacts
Google Contacts Sync Adapter
Google Dialer
Google Chrome
Google Keyboard
Google Mail
Google Messages
Google Package Installer
Google Restore
Google Search with Assistant
Google Web View
Device Health Services
Device Personalization Services
Digital Wellbeing
Phonesky (Google Play Store)
Setup Wizard
- Magisk-disable-dm-verity-v21.4 Special Magisk installer for Motorola devices.
2. Installation instructions
Spoiler
1. Install TWRP and boot the phone into it.
2. Go to "Install" section and install sequentially:
- copy-partitions-20200903_1329.zip archive;
- LineageOS 17.1 archive;
- TWRP_Installer archive.
3. Go to "Reboot" section, choose "Recovery". The phone will reboot back to TWRP. Now if we go to "Reboot" we will see that the device is in Slot B.
4. Go to "Install" and install the Google App archive.
5. Go to "Wipe" and do "Format Data".
6. Reboot into the system to the language selection menu and then reboot back to TWRP.
7. Go to the "Install" section and install the Magisk installer archive.
8. Reboot into the system.

Great work. can't wait for LineageOS coming to the Edge+.... desperately waiting.

Ezekiel_devoid said:
I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.
Click to expand...
Click to collapse
I had the same problem about an hr ago
*edit*
I been on 013121 Build for about (3) days now. Cant get the dam device to wake up for the life of me. Phone Call? Yea, screw that, gotta hold in power and reboot to have the dam thing awaken....

Anyway to do this without computer

I updated Mode FlameGApps to the base of 03.02.2021
Added PixelLauncher, disabled removal of SnapCamera and other camera apps.
371.78 MB file on MEGA
mega.nz

The last posts in this thread have been edited/deleted. I take this opportunity to remember where you can read the forum rules
After reading the rules and even though you think something is against it, you should use the report button instead of create spam topics that bring nothing of value to our community.
Thank you!
FSadino

Related

[ROM] [8.1.x] LineageOS 15.1 Official (All variants) [NO VoLTE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 is a free, community built, aftermarket firmware distribution of Android 8.1. (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search XDA for the best way to do so for your device (if you already did that prior to installing any Nougat ROM, you are fine!).
* You must use the search first and make sure your question has not been answered yet!
* Do NOT ask for the availability of features or if any specific app works - we implement / announce new features when we want to
* Use the latest TWRP available, otherwise expect issues
* If you have a problem, do not ask if someone else has it. Post with logs or don't post at all!
Code:
[COLOR=RED][B]Important note:[/B][/COLOR]
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
Known Issues / NOT working / "Bugs"
* Search the thread!
* Anything running VoLTE firmware
* You tell me! (See "Other Issues")
Everything else WORKS, do NOT ask if anything (feature, function, ...) specific is working or not (Search the thread if you want to make sure and if you don't find it: test it yourself)
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem: boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!!
Press BOTH volume keys + power key - it will vibrate very short. Wait until a notification appears that the bugreport is ready, send it to your mail and post it.
Alternatively go to dev options (press "build number" in "About phone" 7 times to activate it), activate the switch "Shortcut for bugreport", then go to Settings->Keys->Power key and activate it there as well. Long press power-key and then use the new menu item.
Only if rooted:
Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the LineageOS boot logo), use adb or any other file explorer tool to pull a copy of "console-ramoops" after the reboot and provide that.
Code:
adb pull /sys/fs/pstore/console-ramoops
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Changelog
* Gerrit (All)
* Device tree
* Kernel
Download Links
ROM: https://download.lineageos.org/kiwi
Again: if you need Google-Apps, install them after flashing the ROM and BEFORE the first reboot!
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version, others might also be working (make sure to use ARM 64bit when using other providers!)
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Root addon:
Official download site - our device is ARM64
Don't use SuperSU or other tools, otherwise expect bootloops!
Important note
This is a development thread. This means it is NOT your personal support thread.
Questions about anything not related to LineageOS on kiwi (Honor 5X) will not be accepted nor be answered.
This includes topics like going back to stock, problems with third-party apps (e.g. Snapchat), ...
Also do not encourage people with such questions by answering them but report them to keep the thread clean!
Supported variants
Honor 5X
USA: KIW-L24
Russia: KIW-L23
India: KIW-L22
Europe: KIW-L21
China: KIW-AL10, KIW-AL20, KIW-CL00, KIW-UL00, KIW-TL00 (might have some firmware problems), KIW-TL00H
Honor GR5
Canada: KII-L05
Japan: KII-L22, KII-L21
Your's missing? Contact us!
XDA:DevDB Information
LineageOS 15.1, ROM for the Honor 5X
Contributors
BadDaemon, Dobroslaw Kijowski
Source Code: https://review.lineageos.org/#/q/(project:LineageOS/android_device_huawei_kiwi+OR+project:LineageOS/android_kernel_huawei_kiwi)+AND+(statuspen+OR+status:merged)+AND+branch:lineage-15.1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-09-22
Last Updated 2019-06-26

Reserved
FAQ
Q: Why the **** did it take so long?
A: Besides the fact that I don't really need to answer about my working speed:
I have actively been working on bringing up 8.x for this device since February. Some might have seen some development going on with the kernel on 14.1, but effectively this was all in preparation for 15.1: The kernel being used in this version of the ROM is completely redone:
We threw away what we had and started fresh with a plain qcom kernel. Then we re-added what we needed, effectively ending in around 700k lines less of custom additions by the OEM.
Q: Why didn't you share it before, so others could work on it as well?
A: Because last time we did that, someone else came along, compiled our work and shared it himself. (Not to start about all the other copy&paste-ROMs who could have done the work as well but usually just wait for us to do it)
Q: Anything else to add?
A: Yes: read the first post before replying or testing the ROM!

Reserved
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install

Reserved

Reserved 2

this was suprising will test it and see if it works

it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .

omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
Please tell me you have updated your twrp before trying?

BadDaemon said:
Please tell me you have updated your twrp before trying?
Click to expand...
Click to collapse
nope
its 3.1.1.0

So far, no issues to report on KIW-24. Awesome job!

omid_shirzad said:
nope
its 3.1.1.0
Click to expand...
Click to collapse
Bro ... update it and try .... please read Frist post

Bharath kumar 007 said:
Bro ... update it and try .... please read Frist post
Click to expand...
Click to collapse
THANKSSSSSS
updated it and i'm flashing rom again<i think it workd:good::good::good:

finnaly oreo is coming for honor 5, cant wait to test it, thanks dev

So glad people follow the instructions:
"Read the first post!"
"* Use the latest TWRP available, otherwise expect issues"
...

BadDaemon said:
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install, just use the ZIP linked in the first post instead of one from the official page
Click to expand...
Click to collapse
Thanks. Buddy. I always knew you are working and you will post it. Community thankful to you.

omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
you can try this method

Guys, this problem is already solved. dont post such stuff please, especially when its a user error...

Thanks to devs to make it possible.... I am coming from LoS 14.1 did a full wipe but rom does not boot (showed LoS logo but reboot to recovery) after that I flashe Rom + Gapps + BaPatch.zip but phone stucks on Huawei logo. I don´t know how to downgrade Emui because I have the chinese variant UL-00

Bootloop
Hello first of all thanks to the devs who made it possible for our device i really appreciate their hard work so im coming from los 14.1 using it as my daily driver for almost 4 months had no issues with it so far with it but today when i flashed this rom [clean installed] it show the lineage boot logo but after a min device reboots back to recovery i have tried again a several but no luck so far hopefully the devs can understand whats the issue thank you? btw I'm on latest twrp also and my device name kiw-l21 and also I'm not on volte firmware

blackscreen
hope i take the logs right
lockscreen goes black after restart
View attachment 2018-09-23_09.54-lockscreen.zip

[ROM][UNOFFICIAL][9.0][DIG-L21HN] Lineage 16 for Nova Smart / Honor 6C / Enjoy 6s

my device is h60-12, should i flash marshmellow stock firmware first before flashing this rom?

Wow thanks for sharing this ROM.
Exzellent Work. Thank you!

I flashed it.
Amazing for the first build.
Let's hope that the rest can be fixed.
I also found another bug, the flashlight is broken.
Magisk 20.3 works fine with pass SafetyNet.
Thanks a lot for the ROM!
I love it!

Taswim said:
my device is h60-12, should i flash marshmellow stock firmware first before flashing this rom?
Click to expand...
Click to collapse
This is for Diego only, your device is not supported.
jamal2367 said:
I flashed it.
Amazing for the first build.
Let's hope that the rest can be fixed.
I also found another bug, the flashlight is broken.
Magisk 20.3 works fine with pass SafetyNet.
Thanks a lot for the ROM!
I love it!
Click to expand...
Click to collapse
I tried long time ago fixing those issues with good help, couldn't manage it.

Thank you @yener90 for update this rom.
The problem is, AFH found no mirrors to download the newest update :/

@jamal2367 use latest version
Update
2020-01-24
• fixed speaker volume fluctuation
ROM
TWRP

yener90 said:
@jamal2367 use latest version
Update
2020-01-24
• fixed speaker volume fluctuation
ROM
TWRP
Click to expand...
Click to collapse
Thank you!
Audio works fine now!
And my Touchscreen is now.
Smoother Scrolling + Ghosting Effect is gone.
Nice Job, wow!

@yener90 This ROM isn't for Honor 6 , please post to the right forum!

Good!
Everything is set! The firmware is quite stable, nothing is buggy, everything works well. I hope that this version of the firmware on the Honor 6C will not be abandoned and you will make a working camera. I wish you success in your development!

i flashed twrp and i got blackscreen when i try to reboot to recovery and system, i have a nova smart DIG-L21 (not HN but it shouldnt matter because its the same thing) 16GB/2GB, no idea whats happening
rebooting to recovery from system with adb reboot recovery results a blackscreen, then rebooting to bootloader and doing fastboot reboot results a reboot to "your phone is unlocked" screen and going to that black screen again, rebooting to erecovery and clicking reboot from there works and reboots to system after the your phone is unlocked screen
edit: so i just saw what was the device getting reconized as when i do "adb reboot recovery" and, well: Qualcomm HS-USB Diagnostics 900E, from there only blackscreen, i can hold power button and vol down to reboot to bootloader, from there:
1. if i do fastboot reboot i will reboot, see that your device is unlocked screen for a second and go in that blackscreen again
2. hold power and vol up to reboot in erecovery and click reboot, after that i pass the device is unlocked screen and go to emui
another edit: fastboot boot twrp_3.3.1.0_blabla.img is stuck on booting...

Update
2020-02-09
• added support for all variants of diego
• updated Lineage
ROM
TWRP

Thank you for the update
Edit:
update works perfectly.
I think i have fixed the reboot issues
I discharged my phone to 0% and skipped two days.
After that I charged it to 100% and since then the reboot function is working now.

Sorry, but I'm a bit confused.
Is this rom suitable for Honor 6 Plus PE-TL10 too?
tnx

No.

I was really thrilled to see that there is a new ROM for the 6C, great to see that.
One question though:
yener90 said:
Broken
Camera
Notification LED
Reboot
Click to expand...
Click to collapse
Does "Broken" mean that the three features don't work at all or do they somehow work with bugs?
I'd really like to update my phone but no working camera at all would be quite a problem.

Fix the camera please
Did someone manage to fix the camera? If so, how? I tried to fix it myself - bootloop

this rom dosen't work on my enjoy6s (DIG-AL00)

this rom work on my enjoy6s (DIG-TL10)，but,can you fix the camera?

tototjc said:
this rom dosen't work on my enjoy6s (DIG-AL00)
Click to expand...
Click to collapse
It's work on my DIG-AL00(Enjoy 6S). You shouldn't flash SuperSU after you flashed the system. Just LineageOS + OpenGapps is fine. Wait for a while and you can enjoy it.
I have noticed that the Notification LED will turn on (Yellow colored, never appears on EMUI) some times when I plugging in the charging, but not stable, only flashes for a few times. And my Reboot function is working normally too, but my fingerprint is broken. This is unlike @yener90 's description.
Interesting, right？

[ROM][10.0][UNOFFICIAL] LineageOS 17.1 for Mix 3 5G [andromeda]

Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
You are strongly advised to flash the latest modem firmware. You can grab that here: https://sourceforge.net/projects/xiaomi-andromeda/files/firmware.zip/download
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
Data partition must be formatted (not wiped) to remove forced encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install gapps/nanodroid, copy it to the phone and install after the ROM. Once you have flashed the ROM and any add ons, you must format internal storage again. Internal storage must be completely empty for the very first custom ROM boot, once a custom ROM has been installed and you want to swap to a different one, further formatting is not necessary.
Reboot back to system and enjoy custom ROM goodness

Reserved

Thanks, been waiting for this. Will test it out

Just switched to this one because Xiaomi probably won't ever release Q for andromeda. Working great so far!

Can you flash modem via twrp or do I need to use Odin?

Arcticsoldier said:
Can you flash modem via twrp or do I need to use Odin?
Click to expand...
Click to collapse
twrp

pm4rcin said:
1. After some trouble with installing (first time so...) system works fine but when I plug my usbc-jack adapter and headphones it doesn't see them. How can I fix that?
2. Another thing is no 4k option in camera app for recording.
PS. Thanks for your work delivering that ROM.
Click to expand...
Click to collapse
I got no problem with headphones here.
Stock LineageOS Snap camera can't do 60fps or 4k recording. There are plenty of camera apps on the play store that have these options.
If you want to use GCam then this port is the most compatible with andromeda, it can do 1080p/60fps and 4k/30fps video recording. https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.9.apk
This GCam port does not work with selfie camera at all, you must use the built in Snap cam for that. My suggestion would be to set the slider to open the default camera app and to have have GCam on your home screen.

Phone is not rooted, but many apps do not work because they think its rooted. I.E. Revolut, banking apps, Outlook, Teams. Is there an workaround for this?

flori.one said:
Phone is not rooted, but many apps do not work because they think its rooted. I.E. Revolut, banking apps, Outlook, Teams. Is there an workaround for this?
Click to expand...
Click to collapse
This problem with false positives happens on stock ROMs as well. When I owned a Zuk Z1, loads of apps thought the stock ZUI was a rooted custom ROM. Not a lot can be done about it because each app uses it's own detection method and the companies that make these apps obviously aren't going to broadcast the detection methods they use.
You may have success running these apps by actually rooting your phone and using Magisk Hide on the apps that don't work.

It's the first time I install a non-official Lineage ROM and I've found that both SELinux and device encryption are disabled. I also got a notification saying this was due to the ROM being built with public keys?
I don't know if this is normal and if there's something I can do to enable SELinux and searching for solutions hasn't returned any
Also, what's the keys thing about?
Thanks for your efforts!

Groctel said:
It's the first time I install a non-official Lineage ROM and I've found that both SELinux and device encryption are disabled. I also got a notification saying this was due to the ROM being built with public keys?
I don't know if this is normal and if there's something I can do to enable SELinux and searching for solutions hasn't returned any
Also, what's the keys thing about?
Thanks for your efforts!
Click to expand...
Click to collapse
I'm not on the LineageOS team so I don't have access to their build system or their private keys, hence the warning about public keys. If you really want encryption it is possible but would involve formatting your data partition again and losing all your files. Writing SELinux policy is a bigger task than porting the ROM and I'm only one guy working alone in his free time. If you try to force SELinux to enforcing mode it's quite likely the ROM won't even boot.
If you're worried about a security risk, considering you have unlocked your boot loader and installed an unknown firmware from a random person on the internet, I would say you have already made a decision concerning your phone's security. All my source code is linked in the first post, so feel free to look it over to make sure I'm not doing anything shady

Inkypen said:
I'm not on the LineageOS team so I don't have access to their build system or their private keys, hence the warning about public keys. If you really want encryption it is possible but would involve formatting your data partition again and losing all your files. Writing SELinux policy is a bigger task than porting the ROM and I'm only one guy working alone in his free time. If you try to force SELinux to enforcing mode it's quite likely the ROM won't even boot.
If you're worried about a security risk, considering you have unlocked your boot loader and installed an unknown firmware from a random person on the internet, I would say you have already made a decision concerning your phone's security. All my source code is linked in the first post, so feel free to look it over to make sure I'm not doing anything shady
Click to expand...
Click to collapse
Well, I've never read a better argument for security! I'll try to learn about writing a SELinux policy and will PR you if I can get it to work in my own device. Once again, thank you very much for your contribution!

Hello
Great Job. Hope you could be merged soon in Official build, they announce a relaxed form in order to submit devices BTW.
Also, i'm trying to get encryption working and i'm stuck.
Like my old phone, after a fresh install a go to encrypt my phone.
I have a little droid during few seconds and a reboot (without progressing bar, a classic boot).
After checks phones still unencrypted.
Just for my reminder here are the steps:
- Flash MIUI EEA
- Boot MIUI
- Fastboot > flash TWRP
- Reboot Recovery
- Wipe Cache, System, Vendor, Data
- Install firmware
- Format Data
- Install lineage
Is it correct ?

kikadisa said:
Hello
Great Job. Hope you could be merged soon in Official build, they announce a relaxed form in order to submit devices BTW.
Also, i'm trying to get encryption working and i'm stuck.
Like my old phone, after a fresh install a go to encrypt my phone.
I have a little droid during few seconds and a reboot (without progressing bar, a classic boot).
After checks phones still unencrypted.
Just for my reminder here are the steps:
- Flash MIUI EEA
- Boot MIUI
- Fastboot > flash TWRP
- Reboot Recovery
- Wipe Cache, System, Vendor, Data
- Install firmware
- Format Data
- Install lineage
Is it correct ?
Click to expand...
Click to collapse
I have testing builds with encryption enabled. The good news is the next update will have encryption enabled, bad news is you'll have to format data partition again to get it working.

The LineageOS team have added in Qualcomm's Bluetooth stack so I've uploaded a new build. You probably won't notice any changes because these are "under the hood" improvements, but if you have some high end headphones you may hear a difference!
Also this build and all future builds have encryption enabled. Unfortunately this means you will need to format your data partition in order to install this build, but this is a one time only thing. I can also confirm that F2FS is working perfectly with encryption if you wish to change filesystems. I can also confirm you can switch to a different ROM without formatting (just the usual wipes) so long as the new ROM you are installing is also encrypted. This change might mean that you can come straight from MIUI without formatting but this is completely untested by me.
Here's the link, and remember you MUST format internal storage if you are on an unencrypted build:
https://sourceforge.net/projects/xi....1-20200630-UNOFFICIAL-andromeda.zip/download

I have tried to flash after format data partition, but I had a bootloop. I was forced to do a clean install after that. I don't know why, but it's working now.
Thanks for your work

Hello, does 5G work on this custom rom?

karolwojak said:
Hello, does 5G work on this custom rom?
Click to expand...
Click to collapse
yes it does

I really need to record conversations or have. I would love to try it out if it had this function

[ROM][UNOFFICIAL][Android 11] LineageOS 18.1 [joyeuse/miatol][22/01/21]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....

Perfect will try tonight

Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?

There are so many Joyeuse LineageOS ROMs I don't even know where to start.

i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours

Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?

sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.

Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk

Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!

Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?

gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.

Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too

does magisk 21 work on the latest build? really excited for android 11

So this will not be compatible with curtana devices?

Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??

everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use

Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse

there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge

Why is today's build 590MB while all others are 1.1GB?

pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager

[ROM][13.0][UNOFFICIAL] LineageOS 20.0 for Mix 3 5G [andromeda]

Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
The official TWRP for Mix 3 5G cannot decrypt A12+ encryption scheme so if you see scrambled filenames in recovery mode and want to access your files then use my unofficial build (version 3.7.0-12.0).
https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
You are strongly advised to flash the latest modem firmware. You can grab that here: https://xiaomifirmwareupdater.com/firmware/andromeda/
This only needs to be done once, once the updated firmware has been flashed you can forget about it.
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
Data partition must be formatted (not wiped) to remove forced encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install gapps/nanodroid, copy it to the phone and install after the ROM. Once you have flashed the ROM and any add ons, you must format internal storage again. Internal storage must be completely empty for the very first custom ROM boot, once a custom ROM has been installed and you want to swap to a different one, further formatting is not necessary.
Reboot back to system and enjoy custom ROM goodness

This post is reserved for FAQs and will be added to when frequently asked questions pop up.
How can I stop the slider from opening the camera?
Go to Settings->System->Gestures->Slider settings

Thanks alot for this Man! Will check it out today and let you know!

I have lineage-18.0-20201204-UNOFFICIAL-andromeda.zip installed. Can I just flash lineage-18.1-20210101-UNOFFICIAL-andromeda-signed.zip over this, wipe /cache and keep /data as is?

Hello, I really want to install this rom especially as it seems the device won't be upgraded. I've never done this before, and tried today but I soft bricked my phone . Got the standard ROM back on now.
Can someone help with what I did wrong.
I followed the instructions on this to down load recovery, https://www.xda-developers.com/how-to-install-twrp/?amp
I managed to get the phone into recovery.
I wiped the cache etc, then I installed the modem firmware which was successful.
Then I formatted the drive as the instructions.
I went to move the ROM into the device but when doing this on the PC is timed out, it wouldn't allow me to move the ROM, once I rebooted the device it continued to go into fast boot.
Any help would be welcome.

Oldmanam said:
Hello, I really want to install this rom especially as it seems the device won't be upgraded. I've never done this before, and tried today but I soft bricked my phone . Got the standard ROM back on now.
Can someone help with what I did wrong.
I followed the instructions on this to down load recovery, https://www.xda-developers.com/how-to-install-twrp/?amp
I managed to get the phone into recovery.
I wiped the cache etc, then I installed the modem firmware which was successful.
Then I formatted the drive as the instructions.
I went to move the ROM into the device but when doing this on the PC is timed out, it wouldn't allow me to move the ROM, once I rebooted the device it continued to go into fast boot.
Any help would be welcome.
Click to expand...
Click to collapse
If you are blocked into fastboot you can reflash the official firmware.
Choose the firmware format : https://xiaomifirmwareupdater.com/miui/andromeda/

pommefrite8 said:
If you are blocked into fastboot you can reflash the official firmware.
Choose the firmware format : https://xiaomifirmwareupdater.com/miui/andromeda/
Click to expand...
Click to collapse
Hi there, I installed the original ROM straight after. Just wondering what I've done wrong. Why I couldn't move the lineage os from the computer to the device.
Looks like ive managed to install it just set it up as i write....

Hey Inkypen,
Thanks a lot for the ROM, it's currently my daily driver.
What's the upgrade process between the linked Lineage 18 ROMs? Also, do you have a change log somewhere?
You mentioned in the other thread that you are more active in the Telegram chat - how can I join that?

carimatia said:
Hey Inkypen,
Thanks a lot for the ROM, it's currently my daily driver.
What's the upgrade process between the linked Lineage 18 ROMs? Also, do you have a change log somewhere?
You mentioned in the other thread that you are more active in the Telegram chat - how can I join that?
Click to expand...
Click to collapse
Apologies for the late reply, for some reason I don't get email notifications about this thread even though I'm subscribed. The Mix 3 support group can be found at https://t.me/mimix3_5G and I'm way more active there. All the admins are pretty friendly and willing to help, I'm about most of the time for help and troubleshooting. You can also get access to all the latest builds and other stuff you can't get on XDA

Hello, thank you for all the detailed explanations but I am currently having some trouble with purple/green lines at the bottom of the screen or at the edges of white tabs? I have installed lineage os and have also tried pixel experience but i have had the same results, I have reinstalled lineage a few time but still the same, with miui I haven't had this problem, so my screen isn't faulty, I will try and install the android 10 version of pixel exp and lineage os to see if there is a difference. the green and purple lines aren't too noticeable but I can't stop looking at them! maybe I have ocd?

pm4rcin said:
Hi @Inkypen, I saw that you've pushed the update yesterday but unfortunately it's not available. Did you discover a critical bug or something? Also what's the current status on that ROM. Is there something that doesn't work?
Click to expand...
Click to collapse
I uploaded a testing build to the wrong place. I've now uploaded the proper build with the May security patch. I've added an additional two extras not in official Lineage which are long screenshot and built in signature spoofing support for micro-g users.
https://sourceforge.net/projects/xiaomi-andromeda/files/R/LineageOS/lineage-18.1-20210507-UNOFFICIAL-andromeda-signed.zip/download

thx great work.

Is there any known issue with the gps?
Lately i have some problems to find my position.

ive been been on 17.1 since last year and decided to upgrade to 18.1. seems pretty stable however i get random lockup/freezes which requires me to perform a shutdown/power up by holding in the power button. i followed the guide, updated to the latest twrp and using the latest build. other than that the battery life and speed is great

Hi! Could files accept characters that are not typically accepted in Windows systems but are in Linux? Like ':', or '?'.

First of all thanks a bunch for this ROM. Been running it for several weeks now, everything has worked fine so far.
Today however I stumbled into an issue: USB Tethering does not seem to work for me.
- tried with 3 computers and different OSs (Windows, Linux) ... never worked
- I have another Android10-based Sony smartphone - for this one USB tethering works fine with all 3 computers
- the computers all recognize my Mi Mix 3, but fail to establish a network connection (no IP obtained?)
Does USB Tethering work for you guys? Or anybody having similar issues?
Thanks!

Sorry guys, I pretty much missed out on A12 Lineage, but I'm back with A13 Lineage for you guys! I will provide both integrated gapps builds and vanilla builds for those that don't want gapps. The official TWRP for andromeda isn't able to decrypt A12+ encryption scheme so I've ported the A12 version of TWRP and OrangeFox for our device. Don't try and install the updated recovery if you're running A11 or below, in that case stick with the official version.
Biggest change to my builds is that OTA updates are now enabled, you'll get a notification prompting to update. The builds are hosted on sourceforge and download speeds can be very slow depending on where in the world you are and which mirror it selects. It might be quicker to download updates on a PC. Not a lot I can do about it, that's the downside of free file hosting.
LOS builds: https://sourceforge.net/projects/xiaomi-andromeda/files/T/LineageOS/
TWRP: https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Orangefox: https://sourceforge.net/projects/xi...A12.1-R11.1-Unofficial-andromeda.zip/download

Inkypen said:
Sorry guys, I pretty much missed out on A12 Lineage, but I'm back with A13 Lineage for you guys! I will provide both integrated gapps builds and vanilla builds for those that don't want gapps. The official TWRP for andromeda isn't able to decrypt A12+ encryption scheme so I've ported the A12 version of TWRP and OrangeFox for our device. Don't try and install the updated recovery if you're running A11 or below, in that case stick with the official version.
Biggest change to my builds is that OTA updates are now enabled, you'll get a notification prompting to update. The builds are hosted on sourceforge and download speeds can be very slow depending on where in the world you are and which mirror it selects. It might be quicker to download updates on a PC. Not a lot I can do about it, that's the downside of free file hosting.
LOS builds: https://sourceforge.net/projects/xiaomi-andromeda/files/T/LineageOS/
TWRP: https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Orangefox: https://sourceforge.net/projects/xi...A12.1-R11.1-Unofficial-andromeda.zip/download
Click to expand...
Click to collapse
Hi,
first of all, thank you for your follow-up on the roms on the mi mix 3 5g.
I just have one question, why not make it official?

pirloui said:
Hi,
first of all, thank you for your follow-up on the roms on the mi mix 3 5g.
I just have one question, why not make it official?
Click to expand...
Click to collapse
I have one question for you. What benefit is there to being official? The only real perk is OTA updates, which my builds now have.
The requirements to go official for LOS are unbelievably strict, for example I wouldn't be allowed to patch the ROM to pass safetynet or be allowed to take updated device drivers from a QCOM BSP (which I already have done several times). I don't have the time or energy to work around their restrictions.

Develop Bugs

welcome