Related
Hi all
I have done my best to search all the possible solution on xda as well as google, and I don't think I found the answer.
Basically, my phone (for some unknown reason) now suddenly have the boot loop issue.
I first tried to use the LG PC suite, but it is never able to find the phone when it is connected in download mode.
I then tried to use the LG Flash Tool v.1.18 to flash a stock rom in download mode, but failed, due to the following error (of course USB driver is installed, and COM41 changed)
Code:
PID: Null
IMEI: Null
Model :
DLL: D855
BIN: LGD855AT-00-V10g-222-99-JUL-14-2014-16G+0.TOT
SWV:
SWOV:
Model Information Check Fail
000000000
Finally I use LG Flash Tool 2014 to flash a stock KDZ image, using CS_emerengcy and CES flash, the KDZ image is obtained from the LG dev using my own IMEI. This method actually works, but after it reboots, and goes into the Android Setup wizard, it restarts itself and stuck in boot loop again!
So what may I do please? I am very stuck and have no clue.
luckyvictor said:
Hi all
So what may I do please? I am very stuck and have no clue.
Click to expand...
Click to collapse
Did u try booting into recovery and doing a factory data reset after flashng?
:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English
zzkeier said:
:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English
Click to expand...
Click to collapse
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.
thank you very much
SVR said:
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.
Click to expand...
Click to collapse
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you
hey how did you did that?
zzkeier said:
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you
Click to expand...
Click to collapse
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help
shrey2204 said:
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help
Click to expand...
Click to collapse
well,I flash the system.img by fastboot,and then make a factory reset.Bootloader unlock needed.
i have the same problem
I tried to upgrade phone to Oreo after unlock, in update progress it got error and restart phone! Now it shows:
Code:
Error Mode
Attention!
Please update system again
Error!
Func No : 11 (recovery image)
Error No : 2 ( load failed )
I just have access to fastboot
i did flash system.img and tried install twrp on ramdisk recovery. but always same
:crying::crying::crying::crying:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..
mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.
Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:
Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are
Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising
IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"
So, I happened to follow the steps in this video : https://www.youtube.com/watch?v=qJ4w7G8zl7s on how to install the Korean Pie Kdz to ANY G7 but it resulted to me having issues with the phone such as : The phone would Reboot by itself randomly and my WiFI Mac address turned 02:00:00:00:00.
UNIT INFO
Before the Procedure
I was running an LM-G710V 10b with an unlocked boot loader
Flashed with Oreo AOSP Treble
Has Fastboot access
No Recovery Access
Magisk Installed but no TWRP.
After the Procedure
the Phone model shows LM-G710N 20c
I can not access Fastboot mode thru either button combo or ADB (Both would only reboot the phone normally).
OEM unlock in developer options is greyed out saying Bootloader is already unlocked
No ROOT ACCESS
Can Access Download mode and (useless)Stock Recovery (Thru ADB)
Phone boots normally, however it would reboot randomly.
Additional Notes:
I used LGUP 1.14.3 and the kdz from this thread: https://forum.xda-developers.com/lg-g7-thinq/how-to/pie-korean-kdz-g710n20c00lgukrop0107-t3891207
LGUP can still recognize the phone, however the model now is LM-G710N, and unfortunately LG Bridge does not recognize the phone.
Any Help or Inputs in resolving this would be greatly Appreciated !
xElouise said:
So, I happened to follow the steps in this video :
on how to install the Korean Pie Kdz to ANY G7 but it resulted to me having issues with the phone such as : The phone would Reboot by itself randomly and my WiFI Mac address turned 02:00:00:00:00.
UNIT INFO
Before the Procedure
Flashed with Oreo AOSP Treble
Has Fastboot access
No Recovery Access
Magisk Installed but no TWRP.
After the Procedure
I can not access Fastboot mode thru either button combo or ADB (Both would only reboot the phone normally).
OEM unlock in developer options is greyed out saying Bootloader is already unlocked
No ROOT ACCESS
Can Access Download mode and (useless)Stock Recovery (Thru ADB)
Phone boots normally, however it would reboot randomly.
Additional Notes:
I used LGUP 1.14.3 and the kdz from this thread: https://forum.xda-developers.com/lg-g7-thinq/how-to/pie-korean-kdz-g710n20c00lgukrop0107-t3891207
LGUP can still recognize the phone, however the model now is LM-G710N, and unfortunately LG Bridge does not recognize the phone.
Any Help or Inputs in resolving this would be greatly Appreciated !
Click to expand...
Click to collapse
That shouldn't happen at all. You can try to make the same procedure again but flashing an Oreo kdz.
Edit: also what model was your phone originally?
LameMonster82 said:
That shouldn't happen at all. You can try to make the same procedure again but flashing an Oreo kdz.
Edit: also what model was your phone originally?
Click to expand...
Click to collapse
It's the retail unit LM-G710V 10b.
I don't know what Oreo kdz would be applicable for this unit.
*Typo on Title, Should be LM-G710V
-Update-
So i tried to flash another kdz "G710VMX10j_00_USC_US_OP_1120.kdz" , it completed but gave me a Kernel Crash (entered Sahara Mode) at first boot, then rebooted normally but still my Phone model remained LMG710N but it's now 10j instead of 20c. It still reboots randomly.
-Pics-
Snapped a pick of the Kernel Crash & After Oreo kdz flash : https://imgur.com/a/tgZoXCk
-UPDATE 02-
02/06/19
So I Tried it with SALT and this comes up on the main GUI
https://imgur.com/a/lKUeLqG
SALT also can not read the phone's partitions.
Attachments are some logs from SALT.
-Opinion-
I am suspecting the the problem lies within the phone itself. Maybe some corrupted partitions that became unflashable.
LGUP DFT says there is a mismatch on PRIMARY GPT no matter what kdz i flash.
Hello together,
after many tries to get my nokia 3.2 rooted, i end up now with a black screen.
Only the Qulacomm mode is working.
Get anyone managed to flash the stock firmware with QFIL provided from the rooting thread?
I always end up with "sahara fails".
Every help is welcome!
Thanks!!!!
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
page1875 said:
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
Click to expand...
Click to collapse
please do, i encountered a similar problem.
HowTo Flash STOCK 00WW
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
page1875 said:
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
Click to expand...
Click to collapse
Thank you for your reply, it seems that your problem is more complicated than mine.
I have a global variant with 00WW software and i attempt to root the phone. I successfully flash the patched boot.img and had root access. However wi-fi didn't work after that.
Since before flashing the patched boot.img my phone was running on a different firmware from the one that boot.img was extracted from, so i think that was the problem.
I attempted to use QFIL to flash my phone back to 00WW_15 and it failed half way, bricked my phone.
Normally you can use the EDL Mode every time.
My phone only showed black screen and it was always possible to connect in EDL Mode and flash again.
Did you try to flash again? What happens then?
Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
Click to expand...
Click to collapse
What did you mean by Flash the given image ? Was it flash the firmware package with QFIL ?
My main problem is flashing, it always failed half-way and the error log reported that needed files were missing from the package.
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
page1875 said:
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
Click to expand...
Click to collapse
@update:
Also the files "demoapp.img", "dp_AP_signed.mbn" and "dp_MSA_signed.mbn" are missing.
Remove them from the XML file and try again!
@update
Okay QFIL still failed half-way but i manually flash the user images and my phone boots normally now
Hello,
my nokia 3.2 europe variant wont boot up its stuck in fastboot mode. What can i do to bring it back?
I get this: FAILED (remote: partition table doesn't exist)
P.S. if i do a fastboot reboot it boots back into bootloader
I also had this problems for many many times and don't know what went wrong when this happens.
The only thing that helped was flashing the complete firmware again in EDL-mode.
You can try first to flash only the 5 user-images with fastboot, which i mentioned before in this thread.
I uploaded this files for you, because you don't will find the europe files in internet yet.
Here is the link:
https://transfernow.net/81iti7q21s0s
Good luck!
Hi,
Thank you very much. Is this the complete Firmware? (All Images from Device) Another question: I couldnt Access the recovery System. Did you have the same Problem when your Nokia didnt boot up and was stuck in Bootloader? So is this normal that the recovery is unaccessible?
Yes, that also happens sometimes with my phone.
No, that are not all firmware files, which you need to do a full EDL-Flash.
But with this files you can first try a fastboot flash!
If it does not work, you can take all the other files from the Global-Stock-Firmware, given in the thread https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206.
Delete the 5 files with the same names, flash the Global-Stock-Firmware in EDL-Mode, with QFIL or QDL, (without the 5 files) and in the following flash the 5 europe-image files with fastboot.
Thanks, ive sent it in and got Friday a 00WW Variant of the device back. I will upload those User images for 00EEA to my Google drive so that anyone who needs those files can download them
hello
i wanted to install custom rom and i bricked my phone. i lost recovery mode and i have only fastboot mode .but can not write any img file for example twrp.img beacuse show this error : FAILED (remote: partition table doesn't exist). can please anyone help me.
thank you very much
thanks so much i was able to put my phone back to life. i had almost given up.
smure said:
thanks so much i was able to put my phone back to life. i had almost given up.
Click to expand...
Click to collapse
Hello to ervery one
how you flashed your phone. can you please guide?
i am also stucked in fastboot mode after rooting.
damn... I've been finding on how to restore the wifi and sound because I uninstalled magisk and it failed. I don't think I can thank you enough for this post.