I managed to Extract .OFP firmware (C.17) of Realme 3 using oppo_decrypt python script
it is from github. after the extraction i got this files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it contains Scatter file and auth_file that we can use on Third Party Flashtools out there, so is used the latest version SP FLASH TOOL
i load the scatter file and the auth_file except the default DA file of the flashtool.
after clicking [Download >] and connect my phone while Holding all the buttons (vol+,,vol-,,power) it reads by the flashtool and start downloading DA,
however there is an error showing about the Download-Agent File(DA), i flash in many ways but no luck that error always showing.
this error >>>>>>>>>>>>>> ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
so i search the internet what's the meaning of that error and this is what i found
Error 0XC0060003
Message: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
Meaning: SP flash tool is unable to read or write to the device using the preset Download Agent
Solution:
The device might require a custom Download Agent (DA) to be flashed
Ensure the battery is well charged
Take out and reinsert the battery
Try using a different USB cord, port and PC
Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
Try a different USB cord
Try a different port on the PC or another PC
Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
Do not hold any button when connecting to PC
Meaning if there is someone can provide the proper DA File for Realme 3, we can successfully flashed DEAD REALME 3 without
the help of SERVICE CENTER.
Please if there is someone that has the DA File for Realme 3, comment and provide the file. Thank you!
ATDteam said:
I managed to Extract .OFP firmware (C.17) of Realme 3 using oppo_decrypt python script
it is from github. after the extraction i got this files
View attachment 5195403
it contains Scatter file and auth_file that we can use on Third Party Flashtools out there, so is used the latest version SP FLASH TOOL
i load the scatter file and the auth_file except the default DA file of the flashtool.
View attachment 5195409
after clicking [Download >] and connect my phone while Holding all the buttons (vol+,,vol-,,power) it reads by the flashtool and start downloading DA,
however there is an error showing about the Download-Agent File(DA), i flash in many ways but no luck that error always showing.
this error >>>>>>>>>>>>>> ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
View attachment 5195411
so i search the internet what's the meaning of that error and this is what i found
Error 0XC0060003
Message: ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0XC0060003)
Meaning: SP flash tool is unable to read or write to the device using the preset Download Agent
Solution:
The device might require a custom Download Agent (DA) to be flashed
Ensure the battery is well charged
Take out and reinsert the battery
Try using a different USB cord, port and PC
Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
Try a different USB cord
Try a different port on the PC or another PC
Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
Do not hold any button when connecting to PC
Meaning if there is someone can provide the proper DA File for Realme 3, we can successfully flashed DEAD REALME 3 without
the help of SERVICE CENTER.
Please if there is someone that has the DA File for Realme 3, comment and provide the file. Thank you!
Click to expand...
Click to collapse
Here are the instructions for restoring and refurbishing:
https://4pda.ru/forum/index.php?showtopic=907017&st=9060#entry103559971
I myself personally flashed my Realme 3 (RMX1821), it was a complete brick! The instruction is fully working !!!
popoff-r said:
Here are the instructions for restoring and refurbishing:
https://4pda.ru/forum/index.php?showtopic=907017&st=9060#entry103559971
I myself personally flashed my Realme 3 (RMX1821), it was a complete brick! The instruction is fully working !!!
Click to expand...
Click to collapse
im going to try it. thank you so much for the information brother.
ATDteam said:
im going to try it. thank you so much for the information brother.
Click to expand...
Click to collapse
Bro it works!!!! My dead RMX1821 is now alive hahahaa, Thank you so much, im going to make a turorial tomorrow! for Realme 3 and 3i thank you so much!
[SOLVED]
Repair DEAD(HARD BRICKED) Realme 3 | 3i Tutorial
In this tutorial we are going to Repair Realme 3 (RMX1821) MT6771 Chipset. from being hard bricked (no charge, no recovery, no fastboot) using SP Flashtool. with the help of Bypass Utility "MTK-bypass" to disable bootrom protection(sla and daa)...
forum.xda-developers.com
Sir can I get the scatter file and auth because I can't extract the ofp plss sir.
Sir can I get the scatter file and auth because I can't extract the ofp plss sir.
after flashing with sp flashtool accidentally i flashed with format all + download. Now I am getting error Download not complete.Error code :0x992566
Related
GUIDE - Flashing Stock 4.2.2 JB ROM (Unbricking)
Since there are lot of bugs in KITKAT , I've created this thread to bring you back to JellyBean. Dont worry about warranty, its official XOLO stock ROM, so it wont void ur warranty.
**Sorry to say, am not responsible for anything goes wrong**
Requirements:-
1. Hardware:-
1. PC or Laptop ( any windows OS ).
2. Q1010i and Data Cable.
2. Software:-
1. XOLO Q1010i ROM:-
XOLO Q1010i 4.2.2 Stock JellyBean ROM
https://docs.google.com/uc?id=0B8iR8ffTPNUTeG1wMDQ4S3JwQkE&export=download
XOLO Q1010i 4.4.2 Stock KitKat ROM
https://drive.google.com/uc?id=0B1KjDDEiQivqM1pOcWpsTWJKNFU
2. SP tools V3.1352.01 (Latest)
http://d-h.st/w6v
3. VCOM Drivers:-
https://docs.google.com/file/d/0B9CsA7yjIABHUkQycklWMGtPaVE/edit?pli=1
Installing Drivers:-
1. Installing VCOM Driver:-
--> Download VCOM driver.
--> Extract VCOM Drivers on Desktop.
--> Switch off you Xolo q1010i and just plug usb data cable into it, don't switch on device.
--> Go to Device Manager and you will see Gxxx (New device).
--> Right Click it (click on update driver and locate Vcom folder you extracted early)
(note: if you are using Windows 8 then you must turn of Digital Driver Signing enforcement to install this drivers successfully ===>>>
http://thephuck.com/end-user-computing/how-to-disable-driver-signing-requirement-in-windows-8)
2. Install SP tools software which you have downloaded.
3. Download STOCK ROM:-
Download the STOCK 4.2.2 JB ROM.
Once downloaded, extract the .zip file.
Procedure to Flash Stock ROM (Unbricking) :-
--> Open SP tools software (flash_tool.exe)
--> Click on scatter Loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--> choose the MT6582_Android_scatter.txt file in the folder Firmware ( ROM extracted path)
--> Choose Download Only from drop Down and click on DOWNLOAD. (*If it show any error, select Firmware Upgrade from dropdown list and click on DOWNLOAD)
It will load and COMPLETE POPUP will come. The Unplug the phone from PC and turn it ON.
DONE Flashing.
Of someone has the custom recovery installed then it's not necessary to flash through sp tools
K.khiladi said:
Of someone has the custom recovery installed then it's not necessary to flash through sp tools
Click to expand...
Click to collapse
this is a easy method for all the beginners bro
I know.... Keep the good work up bro... [emoji106] [emoji3]
K.khiladi said:
I know.... Keep the good work up bro... [emoji106] [emoji3]
Click to expand...
Click to collapse
Thanks bro..
Link Updated
Link Updated
I just have a question that if a rom based on Kitaab is rooted and it got bricked, so flashing the jellybean rom will create any problems with imei or not?
No it will not affect IMEI. It may lost if you do not use proper files to flash it. There are methods to have backup of IMEI. Search for proper method, I think mtkdroid tool does that with PC and mobileuncle tool without PC. Google is there to help you.
Best of Luck.
andro2master said:
No it will not affect IMEI. It may lost if you do not use proper files to flash it. There are methods to have backup of IMEI. Search for proper method, I think mtkdroid tool does that with PC and mobileuncle tool without PC. Google is there to help you.
Best of Luck.
Click to expand...
Click to collapse
Thanks a lot.. I will Google it now...I was asking just to be prepared if something goes wrong...Hail android.. [emoji3]
Bro ur post saved my mob...
SALUTE...
Raj Rohit said:
Bro ur post saved my mob...
SALUTE...
Click to expand...
Click to collapse
Enjoy.. :laugh::good:
can anyone help me step by step how to flash a CWM Recovery on my xolo QC 800 Tab .. want to change its ROM to latest one.
Will it work if my phone is virus infected
Hello Bro,
I want to install the original OS on my XOLO Q1010i. Because my mobile is infected by some adware & malware. It contentiously shows ads and installs different application without any permission. I m fed up of this, to get rid of the virus, I did factory reset for 2 times and Hard reset the phone once. But its not working, that virus downloads and installs files on my phone whenever I use internet.
So, this procedure that u have mentioned here, will it work in this case. I want to install new original system.
Thank you, Bro.
Please Please. Reply.. Help me
please any one give me a solution how to get out of this problem..
i have redmi 1s , which is stuck at MI-Recovery 2.0.1
when i power on phone, its allways getting redirected to this recovery.. i havent ROOTED yet. the phone is not going to any further screen..
all this happened when i tried to install update.. now my phone is not at all detecting in the system also !
i have STABLE ROM which i downloaded from MI website, i renamed it and kept in MicroSD card as update.zip
but when i try to install it from MI-Recovery its saying update.zip not found.. please help me ..
i wish i wouldnt have downloded this update file:crying:
Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html
Thank you very much
seth66 said:
Relax, it's easy to recover your phone
Step 1:
a) Download & Install MiPhone flash tool from:
http://bigota.d.miui.com/tools/MiPhone2015731.exe
b)Download factory image to restore your device:
For MIUI 5 latest stable download : http://bigota.d.miui.com/JHCMIBL56.0/armani_global_images_JHCMIBL56.0_4.3_in_f29358d132.tgz
For MIUI 6 latest stable download: http://bigota.d.miui.com/V6.7.1.0.KHCMICH/armani_global_images_V6.7.1.0.KHCMICH_20150723.0000.6_4.4_global_3155609c91.tgz
c) Extract the archive into an easily accessible location
Step 2:
a) Open MiPhone app & click browse to select the folder where you extracted the rom
b) If your phone is in recovery mode take out it's battery for a second and put it back
c) Now start your phone in fastboot mode by pressing volume down and the power button simultaneously
d) Connect the phone to your pc and let it alone for 1 minute to allow windows to install its drivers
e) In MiPhone app click refresh and you should see a device appearing
f) Click Flash and don't touch your pc or phone until the job is done.
Further info / biography:
http://en.miui.com/a-234.html
Click to expand...
Click to collapse
THank you very much bro, you have helped me a lot , i didnt see your reply till yesterday night.. i have flashed in the process which u said..
now its working perfectly ..
how do i know what is my MIUI version ? i some where saw its miui7 .. does it mean i am in miui7 ? my previous one was miui6 .. how can i know what is my version of miui ..?
SOLVED
oh its ok .. problem SOLVED :: :highfive::victory::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finally i am in MIUI 7
Yeh Dude Its working fine for me........... Many Many thanks for this....
SAGAR SAVKAR
Lol I once had this problem
Hi there,
I was using Pixel Experience (8.1.0) ROM in my moto g5 plus ( XT-1686).
One day i messed up with the recovery partition of my device and bricked it in a way that i can only access to my bootloader & was also able to boot phone & use it normally but i had no way to access to my recovery.
Therefore i flashed stock firmware but now there was a major problem , IMEI 0 even though it detects sim card but IMEI was 0.
(screenshots are attached).
But after rooting when i clean flash any custom rom i was able to get back my imei so, i modified the stock firmware & create a simple user friendly one click GUI program named as "STOCK FIRMWARE SAFE FLASH"(2SF TOOL) solution to this problem.
WHAT IS THIS TOOL ?
Well as i said previously,by this tool you will be able to flash moto g5 plus stock firmware without IMEI loss.
Stock POTTER_NPN25.137-67-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip is repacked with this tool & uploaded to google drive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
** I AM NOT RESPONSIBLE IF YOU MODIFY THE PROVIDED SCRIPTS & FILES & BRICK YOUR PHONE.
** YOU ARE SOLELY RESPONSIBLE FOR YOUR STUPID WORK & IF YOU POINT FINGRE AT ME I WILL LAUGH A LOT.
** YOUR ARE ACCEPTING THAT YOU HAVE READ THE ABOVE DISCLAIMER & PROCEDING ON YOUR OWN WILL.
** BY PROCEDING YOU ARE AGREE TO THIS DISCLAIMER.
VERSIONS
Current : v_1.1.1.1
Only For POTTER
Works on a particular firmware.
Current : v_2.1.1.1
Just copy the exe file to the stock firmware's location & double click to run it !
Only works with Moto G firmwares.
Upcoming : v_3.0.0
As per plan i will try my best to mak it independent on fimware selection.
You will be able to select your local rom folder for flashing.
NOTE: The limitation is you have to download the whole firmware (for version 1.1.1.1) for it from my drive.I will try to remove this limitation on next build.So for now please don't be angry.
NOTE: The above limitation is removed in version 2.1.1.1.
CHANGELOGS
No need to download whole firmware.
Just download v_2.1.1.1 executable file & copy it to your extracted stock Moto G5 Plus firmware folder & double click.
INSTRUCTIONS
The stock firmware has been compressed along with the scripts to a sfx archive.
Double click the downloaded sfx archive and accept the disclaimer.
Then it will start extracting automatically just sit back & listen some song.
After successful extraction,
A shortcut will be created on desktop named "Double Click Me To Start Flashing Safely"(double click it to start flashing process).
ADB installation window will popup ,no matter if you have or not,install it.
Then Motorola USB driver window will popup, connect your phone & install it.
DEPENDENCIES
ADB (included in archive)
Forward Deamon (included in motorola usb driver)
Note: After Extraction of the sfx archive you have to install adb & motorola usb driver (popup window will open) in order to make this tool work.
DOWNLOAD
V_1.1.1.1(Contains whole firmware)
V_2.1.1.1 (Only Executable File)
#Updated both script & link
THANKS
Motorola Mobility
@GEEKOFIA
XDA
Sublime Text 3
Notepad ++
Microsoft
Google
SCREENSHOTS
After Normal Flash :
After Flash With 2SF Tool. :
======== GEEKOFIA ========
VISIT
No 4g signal [only 3g] bug fixed
X-NETWORK FIXER
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
If you just skip the OP & think that flashing a custom ROM can solve the problem,then you are right.
If you want to use stock Rom no more then you can flash custom Rom to get back your IMEI.
But you will notice shortly that you are connecting with only 3G signal,not connecting to 4G/LTE though it is available.
Therefore I suggest you to use X-NETWORK FIXER tool developed by me to solve this problem.
INSTRUCTIONS
Enable USB debugging with the phone connected to pc & tick always grant debugging to the ADB prompt on phone.
Then boot into bootloader mode.
Download & run X-NETWORK FIXER executable file.
Note: Only Works With Generic Modems.
USE AT YOUR OWN RISK ON OTHER DEVICES
DOWNLOAD
X-NETWORK FIXER [Google Drive]
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Update : v_2.1.1.1
DOWNLOAD (mega)
----------------------------------------------------------------------
CHANGES
----------------------------------------------------------------------
NO NEED TO DOWNLOAD WHOLE FIRMWARE.
COPY THE EXE TO FIRMWARE'S FOLDER & RUN.
1 BACKGROUND PROCESS CUT OUT.
---------------------------------------------------------------------
SCREENSHOTS OF THE TOOL
----------------------------------------------------------------------
V_2.1.1.1
V_1.1.1.1
Not working version 2.1.1.1
I still got imei o
bro, i facing no service issue for last two days.... when i put a sim it got detected but shows no service..... If I flash this firmware does it solve the issue???
Anyone still having those above files please? i lost 4g connectivity
Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vimal Vinz said:
Hello All,
Last night I've clean flashed latest MIUI 10 Global Beta 8.7.10 via TWRP after that my device is bricked and not turning on anymore
then I've connected my device with my PC and opened device manager I've verified that "Qualcomm HS-USB QDLoader 9008 (COM6)"
drivers is installed, Then I'm starting to flashing process without TestPoint Method via MiFlash Tool. I'm facing a "Cannot Read From Port COM6"
After TestPoint using MiFlash Tool I'm facing bunch of errors.. Like "The requested resource is in use", same previous error "Cannot Read From Port COM6", "The write timeout" ..
I've attached Screen Shots Below
-Please Help Me.:crying:
Click to expand...
Click to collapse
Its gone man...Its gone
Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback
There is no MIUI 10 Fastboot ROM. For Redmi Note 5 Pro.
LhanaSR said:
Try MiFlash latest MIUI 10 Global Beta fastboot
I think this is because Anti Rollback
Click to expand...
Click to collapse
Is This Possible Solution?
Same issue happened with me and i gave it to service center. Now they are replacing my mobile motherboard. And they will replace it for free as it will be in warranty
Vimal Vinz said:
Is This Possible Solution?
Click to expand...
Click to collapse
Maybe....
It worth to try anyway
How it will be a warranty?? You've unlocked your bootloader so, Your warranty will be voided.
This is Fixed Check This Thread https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....
rfiore said:
I have similar problem
phone totally died.
I did test point and I can see it as Qualcomm device but when I try to flash I have error can't open port COM....
I saw there is a tutorial but I can't write my MI ID and I can't open the login windows on MiFlash....
How to do it?
please help me the phone is new....
Click to expand...
Click to collapse
Did you solve the problem?
I have 100% the same problem:
if you try flashing any rom, even latest beta rom you get the message "Can not read from port COM{portnum}".
I followed every possible tutorial on this forum, nothing works.
Phone is refusing to flash with any rom.
There is a workaround: you can replace inside the images/ directory prog_emmc_firehose_Sdm660_ddr.elf file with a custom file.
( http://www.mediafire.com/file/mxugl93nf4675k9/prog_emmc_firehose_Sdm660_ddr.elf/file )
Then you can flash, you will not get the message "Can not read from port COM{portnum}" anymore.
However after flashing your phone will not boot.
There is no solution at the moment, you can throw away your phone.
@talhosvi If the phone will not boot then what is the point of doing this?
Hello everyone, I have been improving the appearance of the manufacturer's flashing program UNISOC UpgradeDownload for several days because my eyes were bleeding, even the design of SP Flash Tool is not as ugly as this one.
Old
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New
Hey rtd4,
can this pretty program flash a custom rom or only original stock rom.
Whats your experience in functionality? I try to flash a custom rom with no result.
Greetings
Robyn_232 said:
Hey rtd4,
can this pretty program flash a custom rom or only original stock rom.
Whats your experience in functionality? I try to flash a custom rom with no result.
Greetings
Click to expand...
Click to collapse
I don't know if you can flash custom rom since the program only recognizes .pac compressed files
rtd4 said:
I don't know if you can flash custom rom since the program only recognizes .pac compressed files
Click to expand...
Click to collapse
I don´t care how the tool looks like, but if it uses .pac i´m out. And I hope there will never ever be a situation to handle with this format again.
how to flash with .pac extension in motorola E40?
eloigamel said:
how to flash with .pac extension in motorola E40?
Click to expand...
Click to collapse
this is the only application that can flash .pac files
Robyn_232 said:
I don´t care how the tool looks like, but if it uses .pac i´m out. And I hope there will never ever be a situation to handle with this format again.
Click to expand...
Click to collapse
If .pac files are a pain, it's Motorola's fault for installing generic software in UNISOC on Qualcomm, Exynos and some with Helio. The flashing is by Fastboot, RSDLite.
If I ever buy another Smartphone then with custom Rom already installed or easy makeable. I wait for the day to flash my phone for about a year and tried everything so far. The only thing that works was Rescue & Smart Assistant Software to install stock Rom.
Robyn_232 said:
If I ever buy another Smartphone then with custom Rom already installed or easy makeable. I wait for the day to flash my phone for about a year and tried everything so far. The only thing that works was Rescue & Smart Assistant Software to install stock Rom.
Click to expand...
Click to collapse
Rescue & Smart Assistant is not necessary Motorola devices with UNISOC are recognized as generic Chinese devices you just have to install the firmware with the SoC manufacturer's tool which in this case is UpgradeDownload
I tried that tool and my Phone weren´t found. No Problem with R&S Assistant. Did you ever try this with a g20?
Robyn_232 said:
I tried that tool and my Phone weren´t found. No Problem with R&S Assistant. Did you ever try this with a g20?
Click to expand...
Click to collapse
yes i tried it on the e6i, e20, e30, g20
i tried smart assitant and my phone isn't suported its g20, and with the upgradedownload i get a error everytime I try to flash the room, my g20 its stuck on bootloop
I fixed my bootloop with smart & rescue. Not supported? Please tell us step by step what you are doing and what happened.
I put my phone on fastboot and conect to pc, the smart rescue says my phone isn't suported, after I discovered how to choose my device model and downloaded the rom but i get a dll error, will try to follow another post i saw about the error, i checked the post, cant download the fix its a broken link
Maybe Motorola / Unisoc USB drivers not installed. And I booted into fastboot WHILE connected to PC in the moment the program ask for the connection right before flashing.
Robyn_232 said:
Maybe Motorola / Unisoc USB drivers not installed.
Click to expand...
Click to collapse
how my phone need to be?
on the white screen with fastboot mode?
its the only screen that i can enter on the phone, i updated magisk and now its stuck on bootloop
My phone was so bricked there was no fastboot screen it flashed instandly when I turned it on with holding power and vol up or vol down. Use original USB cable. And what ROM did you use before and how do you flash it? I want dot OS but can´t flash it...
Robyn_232 said:
My phone was so bricked there was no fastboot screen it flashed instandly when I turned it on with holding power and vol up or vol down. Use original USB cable. And what ROM did you use before and how do you flash it? I want dot OS but can´t flash it...
Click to expand...
Click to collapse
i was using stock rom, just flashed magisk and tried to update, when i try the smart program i get an dll error, can't load the dll
Don´t know whats going on there. I definitely got my phone to work with RSA Software. No need to install dll files. But I have the european version xt2128-2. Maybe use another PC or you use an old Windows Version? What about the Unisoc USB Driver?
Robyn_232 said:
Don´t know whats going on there. I definitely got my phone to work with RSA Software. No need to install dll files. But I have the european version xt2128-2. Maybe use another PC or you use an old Windows Version? What about the Unisoc USB Driver?
Click to expand...
Click to collapse
i have the driver installed, this is the error i get