Develop Bugs

[MOD-CM9.RC2] Bottom Status Bar ( Not TabletUI StatusBar)

MOD CM9 RC2 - BOTTOM STATUS BAR
SCREENSHOTS
>> screenshot-1 click here << and >> screenshot-2 click here <<​
PLEASE READ CAREFULLY HOW TO INSTALLATION PROCESS
1. Before you go to CWM, firstly go to SYSTEM SETTINGS - SYSTEM - NOTIFICATION DRAWER - do CHECK LIST "TOGGLE FLASHLIGHT'
2. CWM - WIPE CACHE - INSTALL ZIP -REBOOT
3. Done Reboot, and when entering Homescreen, ignore "SystemUI Force Close", just tap "OK"
4. Go to SYSTEM SETTINGS - STATUS BAR - STATUS BAR STYLE - DEFAULT (Allow SuperUser Permission ). and at the bottom do CHECKLIST "DISPLAY AT BOTTOM" (if you want to get the status bar moved to the bottom of the screenj) , and do REBOOT.
5. Done Reboot, if you want to add or edit Navigation Bar button, go to SYSTEM SETTING - INTERFACE - MORE - NAVIGATION BAR.
6. For those who doesn't like the navigation bar and want to disable it, open navigation bar Apps, find it in your drawer, do tap "Hide Navigation Bar(full screen), allow superUser permission, and do Reboot your wonder.
DOWNLOAD
- MOD-CM9RC2.Bottom.Status.Bar (Enable-Capacitive light )
OR
- MOD-CM9RC2.Bottom.Status.Bar (Disable-Capacitive light)
NOTES !
1. Enable-Capacitive light : Touchkey light turn on normally
2. Disable-Capacitive light : Touchkey light turn off permanent
3. Never change status bar style to "Salad Bar", otherwise SystemUI will Force Close
ENJOY :laugh:
**for DELETE/UN-INSTALL MOD, Download DELETE-MOD-CM9RC2.Bottom.Status.Bar
CREDIT & THANKS :
Arco
rob43
Nexus S XDA Dev section
Cyanogen Mod
XDA.
(Unofficial Community) Galaxy Wonder CyanogenMod Indonesia
if you like this Mod, just press the THANKS BUTTON :good::good:

WOW man you made so many mods and all are good, sadly i am on cm10 i can't use this keep it up.......or else..........HEHE

Too bad I'm on cm10.1(galaxy s plus) and can't test. Looks weird but its cool. Reminds me of cm7 when they had the option for bottom statusbar

Juhan Jufri said:
Too bad I'm on cm10.1(galaxy s plus) and can't test. Looks weird but its cool. Reminds me of cm7 when they had the option for bottom statusbar
Click to expand...
Click to collapse
how to make bottom bar at gt-s5360?

ghaiyas said:
how to make bottom bar at gt-s5360?
Click to expand...
Click to collapse
This is for galaxy WONDER no galaxy young. If u want to ask a question post it in the 5360 thread
Sent from my S100 using xda premium

pls port this for cm10 i try it but stuck at bootloop

can you add a guide for this ?
thanks
Sent from my S500 using xda app-developers app

guide please, i'll try to stock rom buttom statusbar with toggle

Pls add a guide for this

thanks

can you make navigation bar hide when not used like DCM 11 (expanded destop)

Validus ROM - Looking for Maintainer

:fingers-crossed: Hey Guys - the folks from Ground Zero ROMs-VALIDUS ROM would like to know if anyone is interested in maintaining a thread in our Sprint SGS3 Threads :fingers-crossed:
They have a couple of threads on xda for other devices (such as AT&T SGS3) and a growing following on their G+ site
***here is a sample of their OP on AT&T SGS3 thread***
http://forum.xda-developers.com/showpost.php?p=48013642&postcount=1
Ground Zero ROMs Present,Validus!!
Validus Features V 4.3[4.4.2]
AOSP Base
Custom Logos in About Phone Section and The Void(Custom Settings)
Normal or Center Clock Mod with possibility to change color
Custom Data formats in Status (day, month and year)
Notification drawer & Notification row Transparency, custom Colors and custom image
Customizable low battery pop-up warning
Option to enable notification light when screen is on
Alternate default app picker
CRT with 5 options: don't show, collapse horizontal, collapse vertical, collapse orientation dependent, scale down
CPU info overlay
Wifi name in notification drawer
Slide through status bar to adjust brightness
Screenshot quick trash
Notification drawer shortcuts
Custom battery styles (normal, percentage, circle, circle with percentage, doted circle, doted circle with percentage)
Custom battery colors and animation speeds
AOKP custom system animations
Animate carrier label when collapsing panel
Navigation bar customization
Navigation ring customization
Improved scrolling cache
New power menu from SlimRoms
RAM bar
Power connect/disconnect notification support
Lockscreen targets and shortcuts from SlimRoms
Halo
Lockscreen widgets from SlimRoms
Lockscreen PIN key pad shuffle
Lockscreen Lockring theme changer
Lock before unlock the new way from SlimRoms
Dark Symmetry is Back!! (TRDS Port From SlimRoms) Thanks Beergang!!
Double Tap Status bar to sleep
Omni Switch
Xposed Framework w/Gravitybox
Multi-window
GZ Pie controls
Downloads: http://www.drdevs.com/devs/gzroms/Validus/Weekly/
Gapps: http://www.drdevs.com/devs/gzroms/Va...GZ_GappsAroma/
INSTALL INSTRUCTIONS:
Use Latest CWM Recovery (6.0.4.7+) or Latest TWRP Recovery (Hasn't been tested)
Wipe data/Factory reset
Wipe Cache
Format System
Wipe Dalvik cache
Install Zip
Install SuperSU v.1.93 flashable zip(OPTIONAL)
Reboot
Set up Basic's
Reboot to Recovery
Flash Gapps [GZ Aroma Installer] or Newest [Pa 4.4.2 Gapps)
Reboot
Enjoy!!
More to come........
Creds to Slim, Vanir, AOSP, Dirty Unicorns, LiquidRoms and all devs and our community that has kept myself and the team motivated
Supported D2 Bootloader versions:
d2att: I747UCDLK3 & I747MVLDLK4
d2tmo: T999UVDLJA, T999UVDLJC, T999UVDMD5 & T999VVLDLL1
d2spr: L710VPBMD4
(heimdall/odin or recovery-installable package)
Known Issue's
- Camera freezes when switching from video camera back to camera. Reboot fixes it and allows camera and video to work again, but each time you switch to video, the camera will freeze when switching back to camera. Its a weird bug and there doesn't seem to be a commit to remedy it as of yet so for now if you don't want to deal with rebooting, flash Steve Spencer's KK Camera zip that can be downloaded here --> http://www.sspencer10.com/android/filehost.php
-You tell us
GROUND ZERO ROMS community on Google + : https://plus.google.com/u/0/communities/109330559573276360638
Enjoy!!
*****THIS ROM IS AVAILABLE FOR MANY DEVICES!! PLEASE FEEL FREE TO SHARE IT AROUND TO OTHER DEVICE USERS!! *****
I have tried the d2spr versions and it runs great ... they are in the process of making a "unified" version for all SGS3 phones ... visit their G+ site for more info and Happy Flashing

I'd be happy to maintain

:good: Thank You Sir ! I sent message to Jon Cennon on their G+ site and asked him to contact you ... or you can contact him on G+ ... Thanks ! :good:

:good: :highfive:THX @CNexus who will soon be setting up a thread for Validus ROM for us :highfive: :good:
I'm sure folks are gonna like it (if they haven't already tried it)
​

Going to close this as per above. Thanks all!

[ROM]D8 ROM (6.0.1) G930FXXU1BPJE(9519568) 6.0 19-dec-16

Changes:
Phone application:
- Auto record for incoming and outgoing calls. If Incoming calls recording is on, application will always open in full screen mode (currently no way to start record in popup).
- Adjustable after call delay.
- Record or Add call button (select in Rom Control).
- 2 additional modes in "Network mode" select dialog. Long click on data toggle brings "Network settings" but not data usage.
System:
- Google *backup* wake lock fix (not script, fixed in code).
- Kill foreground application by double, triple or quad home click (first free combination)
- Kill foreground application by long clicks.
- Full screen mode settings
- Torch by home (1.1.0, volume keys do not work in deep sleep mode)
- Data traffic, record, screenshot, 5way reboot in Power menu. Select buttons in Rom Control. Record button will trigger recording, but not start only, like in another ROMs.
- Multiwindow on/off setting.
- 180 degrees rotation setting.
- Settings for screen on, and sound when connecting power.
- Setting for screen on by "Home"
- 12 buttons Toolbox.
SystemUI
- Potato Gradient (may be switched off in ROM Control)
- Hide Silent, Alarm & BT status bar icons.
- Custom status bar icons color. All icons, all text (not some of). No conflicts with dark icons on white background feature (color negative or dark mode)
- Potato clock with new options. Can select stock clock, or custom format. Optimized. Battery friendly (off on screen off).
- Tap on Date & Time in notification area start Clock or S Planner. Long tap - settings.
- %% on stock battery.
- 3minit battery with additional settings. Optimized. Battery friendly.
- Data traffic and current transfer rate in Notification. Can be switched off. Adjustable colors. Click launches Data usage statistics. (switched off on notification collapsed)
- Customable Lock screen single text clock. Support for RTL. Next alarm, seconds.
- Quick launch panel in "Recents". Enhancement: After exit from application, started by QL, you'll be returned to previous application, but not to home screen. Additional settings in ROM Control.
- Memory usage bar in "Recents"
- Clear memory button in "Notification"
More, that I don't remember.
ROM Control video demo - https://drive.google.com/open?id=0B-CE1vlk7OYkUFVtb0pQR2l4OG8
Credits to Tkkg1994 and boostermbkking for some great ideas,
- Samsung for their software
- authors of 3minit, potato and lock screen weather mods
- svadev for the deodex tool
- Chainfire for the root access
- sound mod V17 thanks to zubi182
- Wanam and rovo89 for the Xposed
- amarullz for aroma
- Gayos24 and daxgirl for ROM control
- topjohnwu for systemless xposed
- If I forgot someone, PM to me!
- tamirda for UDS toggle and some examples, how to add modifications in his great ROM.
- mwilky and Tkkg1994 for his fingerprint after reboot mod.
- @Androidwizzard, @sanoc69, @Umair Ahmad for installer fix.
- djb77 for TGP Kernel.
You may want to buy me a beer? You can donate down here

Installation:
1. Follow instructions for all custom ROM's (you'll find a lot in this forum, no wipes needed)
2. Flash update if released.
Download:
ROM: https://yadi.sk/d/yeBqnrl234DGiC or https://drive.google.com/file/d/0B-CE1vlk7OYkTHlveFVPbGFHS2M/view?usp=sharing
Update: https://yadi.sk/d/8VQZjj__34N6br
Boot+Modem: https://yadi.sk/d/BGKE0_dc347R6s
Old version:
ROM: https://yadi.sk/d/w2RxP4tuxupfD
Update: https://yadi.sk/d/rElf0BMBxyFhr
Boot+Modem: https://yadi.sk/d/WW_PeJENxuqXg
Change log:
6.0.0 - Re-based on G930FXXU1BPL2 (9689434). Updated kernel, root, systemless modules.
6.0.1 - Fixed QS edit bug.
6.0.2/3 - Multi user mode and multi user switch fixes.
5.0.0 - Based on G930FXXU1BPJE (9519568)
5.0.1 - You can remove annoying toasts when call connecting. Rom Control - Application settings - Phone.
5.0.3-1 - Enabled WiFi calling (can't test)
4.0.0 - Same as 3.0.11 but based on G930FXXU1BPH6
4.0.1 - Custom background, device info, carrier color in notification area.
4.0.2 - Device info auto update.
4.0.3 - Fixed (?) installation issues when signature verification disabled. It's better, not to disable. Samsung changed package installer. In case of disabled signature check old version will be used.
4.0.4 - Option to hide MSIM panel.
4.1.0 - Multi window control (some applications has issues running in multi window mode) - https://yadi.sk/i/kyzcoEWsv8ztx
4.1.0.3 - Reverted to old Google Package Installer, without "Overlay detected" issue. Removed "Smart block" menu option from settings. Referencing to not existing activity com.android.mms/com.android.mms.spam.HelpActivity, causing crash.
4.1.1/2/3 - Bug fixes, Background and info in notification area can be enabled on lock screen.
4.1.3.1 - Multi windows setting saved on exit from application. Not only on click on "Done".
4.1.4 - Lock screen clock scaling in RC. Workaround for text clock size issues (Next Alarm text & icon invisible or damaged) in some themes.
4.1.5 - Option to hide preferred SIM icon
4.1.6 - Minor fixes. Uploading full file.
4.1.7 - ROM version, time until next alarm, condensed font, scroll long strings in device info.
4.1.8 - Option for fingerprint unlock in ROM Control.
4.1.9 - Optimized package installer mods. Thanks to @Androidwizzard, @sanoc69, @umair. Disable signature check & Enable downgrade settings moved from Aroma to RomControl (please enable after first boot if you need signature check off). Added option to hide IME switch in notification area.
---
3.0.0 - Same as 2.0.23 but based on G930FXXU1BPH6 firmware. Change list 8888212.
3.0.1 - Synchronization with Samsung account fix. You may need give permissions to Samsung Account and somthing like "Private data management" (one that force closing) applications.
3.0.2 - Fixed boot loop with ZTO CSC.
3.0.3 - Fixed vibrate + screen on when listening music and increasing volume if "Safe volume waring" is off.
3.0.4 - Fixed random reboots when connecting power.
3.0.5/6 - More notification area color controls.
3.0.7 - Fixed again "Overlay detected"
3.0.8 - More notification area controls.
3.0.9 - You can hide battery % on status bar, but left on AOD. Better notification color control. Not coloring expanded notifications.
3.0.11 - Fixed SystemUI crash when connecting to VPN
2.0.3:
- Aroma installer. Signature verification, debloat, sound mod, Xposed.
- Jun 2016 security patch
- 1/2 colums in settings
- Battery bar
- Removable Volume panel, power saving mode notifications, grey status bar in "Power saving", low battery notification.
2.0.4 - Weather on lock screen.
2.0.5 - ROM Control updated. Setting for favorits columns number in Settings application. Toolbox in Settings.
2.0.6 - Bug fixes (recommended)
2.0.7 - Quick launch in "recent panel" changes.
2.0.8 - Minor fixes. New Xposed, added ZTO csc & new messages app (full file only, upload will take time) . New quick toggles, new option for "Settings" app in RomControl. Removed Multiwindow from RomControl (use toggle).
2.0.9 - (Minor) Added proper error handling for background image setting in "Quick Launch". Can be done by payed 3minit application. I'm not author of this application.
2.0.10 - Fixed some font size related issues in additions to "Recents" panel.
2.0.15 Many minor fixes. New quick toggles. Removed memory killer from notification screen (it's not a place for killers), it's functionality added to memory bar in "Recents".
Hundreds new options in ROM Control.
2.0.17 - Skip tracks by volume long press.
2.0.21 - Color stuff, torch in PM, secondary symbols on Samsung keyboard, fixes.
Old versions:
---- do not remember
1.1.8 - fixed issue with torch by home & Always on screen mode. Torch by Volume+ returned (unreliable in deep sleep mode).
1.1.9 - New settings in ROM Control for "Restart" button in power menu.
1.1.10 - New "Power menu" settings in Rom Control.
1.1.11 - Select betwwen old and new "Power menu" style. Silent mode toggle in old style.
1.1.17 - Boot to recavery & download blocked if OEM Unlock disabled.
- No kernel signature check (Smart manager do not show security alert).
- Data traffic hidden if S-view cower used
- Full date on lock screen & notification
Solution for "Can't enable private mode" issue:
Method 1:
Use custom kernel.
Method 2:
In Terminal emulator or adb shell type:
su
---Grant permission if asked
restorecon -R /data/system/users

Can I ask, the look of your ROM, is it a theme or is it the Potato Gradient. If not, what is the potato gradient?
Well done! Looks like an awesome rom, will definitely try it out!

JJGLive said:
Can I ask, the look of your ROM, is it a theme or is it the Potato Gradient. If not, what is the potato gradient?
Well done! Looks like an awesome rom, will definitely try it out!
Click to expand...
Click to collapse
Potato gradient - custom status bar background. It included in most of custom ROMs but in this one it may be implicitly disabled.
Try it. There is many things inside that developed by me and not included in any another firmware yet and many old standard things, that completely re-writen and works better, consuming less resources.

d8389 said:
Potato gradient - custom status bar background. It included in most of custom ROMs but in this one it may be implicitly disabled.
Try it. There is many things inside that developed by me and not included in any another firmware yet.
Click to expand...
Click to collapse
Will definitely try your ROM! Thank you!

Tried the rum very much. All works smoothly and nicely.

Just wondering if there is an option to not install next alarm on lock screen. Also do you use Android M boot animation.
Thx
Delivered by my Silver S7.

I see you didnt debloat it since you dont know what apps you need and what not.
Well, what you could do is include a system app removal app (you can find em on the play store) so people can do it theirselves
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
Also, would you like a name 4 your rom?
You could ask people for one if you really want to, and choose on of them, or make a name yourself.
You can call it D8 Rom for example

@d8389
Would you mind sharing your Google *backup* wake lock fix?

mandroid717 said:
Just wondering if there is an option to not install next alarm on lock screen. Also do you use Android M boot animation.
Thx
Delivered by my Silver S7.
Click to expand...
Click to collapse
I'm not going to change boot animations.
Next alarm enable setting added in 1.1.3

kisslorand said:
@d8389
Would you mind sharing your Google *backup* wake lock fix?
Click to expand...
Click to collapse
It seems that wake lock not released on server timeout in stock. See inside services.jar classes.dex/com/android/server/backup
Added wake lock release to 1 or 2 methods handleServerTimeout and its status check before release everywhere.

I must say I prefer the ROM not being debloated, as I really like some of the stock apps.

d8389 said:
It seems that wake lock not released on server timeout in stock. See inside services.jar /com/android/server/backup
Click to expand...
Click to collapse
Thank you very much. That workaround saved the issue I had in the ROM I am using.

JJGLive said:
I must say I prefer the ROM not being debloated, as I really like some of the stock apps.
Click to expand...
Click to collapse
It run good without de-bloating. There is only 1 application, that I keep frozen - Google photo.
Update 1.1.4 released. Changes in quick toggles. Need more testing, so do not delete 1.1.3.
Link to 1.1.4 - in post #2.
Rollback to 1.1.3 - https://yadi.sk/d/oJTa9BwOsotWp

d8389 said:
It run good without de-bloating. There is only 1 application, that I keep frozen - Google photo.
Click to expand...
Click to collapse
I Agree, it runs much better without debloating.
Thank you for an awesome ROM!

I am on bootloader G930FXXU1APF8. Can i just flash this rom?

Erik1805 said:
I am on bootloader G930FXXU1APF8. Can i just flash this rom?
Click to expand...
Click to collapse
This is known issue with Superman.
You should flash stock kernel or stock ROM.
Re-flashing Superman with stock kernel before installing may resolve this.
Try flash this file - https://yadi.sk/d/gumezq2FsqJ8L

d8389 said:
Installation:
No Aroma at this step.
1. Follow instructions for all custom ROM's (you'll find a lot in this forum)
2. After flashing ROM, flash you CSC (before reboot) and updates.
Download:
CSC - https://yadi.sk/d/oT5CcYARsd6hM
ROM - https://yadi.sk/d/H6LIk50CskBYq
Update 1.1.4 - https://yadi.sk/d/guhI4G-xsh2WC
BL & CP APF2 - https://yadi.sk/d/GLHEjgEHskK4d
No wipe data/factory reset needed if you are already on custom.
After wipe date - re-flash SuperSU.
For developers:
Feel free to contact me if you'd like to implement something in your firmware and need help.
Click to expand...
Click to collapse
I can't download the ROM at all.
Trying to click the Download related button. Nothing happens.
Can you use Google Drive or something instead, or fix this issue / bug?

Destroyedbeauty said:
I can't download the ROM at all.
Trying to click the Download related button. Nothing happens.
Can you use Google Drive or something instead, or fix this issue / bug?
Click to expand...
Click to collapse
click twice... It worked for me the second time..
OP:
The rom looks great, only thing I'd like is the option to turn off the ram bar in recents panel.
Also with 1.1.4 update I had several hotboots, which were solved after installing jesse's kernel. Haven't checked if the 1.1.4 zip has a kernel on it, BTW I was coming from Nyssa's rom...
excelent rom! right now I'm testing it, but looks like a daily driver! keep it up!!

arzafran said:
click twice... It worked for me the second time..
OP:
The rom looks great, only thing I'd like is the option to turn off the ram bar in recents panel.
Also with 1.1.4 update I had several hotboots, which were solved after installing jesse's kernel. Haven't checked if the 1.1.4 zip has a kernel on it, BTW I was coming from Nyssa's rom...
excelent rom! right now I'm testing it, but looks like a daily driver! keep it up!!
Click to expand...
Click to collapse
ok.
May be later.
But you should not worry about, because it optimized and consuming less resources, than original one (I don't remember, where it from).
It also start updating when recents open and stop on screen off. So, uou should not worry about battery.
Same or similar happens with all custom components (clocks, battery, traffic etc...). No updates when not visible (if possible). Implicitly stopped when screen is off. If yiu like another ROM, you can ask developers to port my versions of add-ins instead original ones.
1.1.7 released. Added autoruns control to settings. Use carefully.
I'll upload ROM, based on next release from Samsung to another site.
Google drive not showing number of downloads.
You can make mirrors. My internet not fast enough for uploading gigabytes.

[rom][z00l][liquid dark][android 7.1.2_r27]

i guys,
I'm building an extra lean LineageOS 14.1 ROM for hammerhead with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is slightly different than for DARK ROM 13, as I try to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
You will need latest radio (2.0.50.2.30) and latest bootloader (HHZ20h)
Latest TWRP recovery is highly recommended
If you want HDR to work, you will need to keep Google Camera 3.2.045 (all newer versions won't work)
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
https://www.androidfilehost.com/?fid=817550096634786608
Source code
GitHub-https://github.com/darkeyes84
kernel- https://github.com/LineageOS/android_kernel_asus_msm8916
Thanks and credit-
 @govind1233

reserved

reserved2

reserved 3

Screenshots

govind1233 said:
i guys,
I'm building an extra lean LineageOS 14.1 ROM for hammerhead with a few added features. A lot of packages have been stripped down, only the bare minimum is built to provide a fast and stable ROM. That gives you much more freedom as you can install exactly what you really want from the Playstore. You can install most of the missing packages manually, they are available in a flashable zip on the server (see second post).
My approach for DARK ROM 14.1 is slightly different than for DARK ROM 13, as I try to add as many Pixel features as possible while keeping a solid LineageOS base.
Key features
- Full OMS support (rootless)
- Signature spoofing support
- Pixel Launcher (with the provided GAPPS package)
- Pixel animated navbar (with on/off switch)
- Pixel sounds
- Pixel accent colors
- Pixel bootanimation with sound
- Rounded icons
- Google Assistant
- Night Light
- Night Light Brightness
- Choose between dialer and voice assistant in lockscreen
- Hide next alarm from expanded status bar and lockscreen
- Disable the boot animation sound
- Secure lockscreen (disables status bar pull down, quick settings tiles, power button and lockscreen shortcuts)
- Double tap the lock icon on the lockscreen to sleep
- Longpress power button while screen off to trigger flashlight
- Hide bluetooth icon when disconnected
- Volume steps
- Quick unlock pin/password
- Remove album art from lockscreen
- Date in status bar
- Battery bar
- Smart pulldown
- Volume button controls media volume anywhere
- Change navbar height
- Screenshot tile
- Caffeine tile
- Sync tile
- Reboot/recovery tile
- Music tile
- USB Tethering tile
- NFC tile
- Quick settings custom rows/columns
- Turn on/off mobile data with single click on collapsed quick settings
- Status bar ticker
- Separate ring and notification volume
- Specific color for 100% charged battery
- Prevent accidental wakeup
- Remove settings suggestions
- Show WiFi SSID in status bar
- Show carrier label in status bar
- Hide carrier label on the lockscreen (or rename to whatever you want)
- Hide the low battery warning notification
- Remove the orange status bar and navigation bar when in battery saver mode
- One hand mode
- Choose doze brightness
- Adjust animation scale precisely with a slider
- Dynamic nav bar color (changes color to the same of status bar)
- In-call vibration options (on connect, on call waiting and on disconnect)
SafetyNet
The ROM is already designed to pass SafetyNet out of the box. No need to lock the bootloader (which I advise you to do ONLY on a pure factory image install) because the kernel has the patch for it. If you want root, you'll need to install Magisk, which comes pre-rooted. Then, enable Magisk Hide in Magisk Manager, hard reboot and you should be good to go. Also, do not enable busybox in Magisk Manager, that will cause you to randomly lose root. You'll get all you need to know on the Magisk thread.
ViPER4Android/ViPER4Arise
The ROM is designed to work with both ViPER4Android and ViPER4Arise out of the box without the need for SuperSU or any Magisk module. The SEPolicy already contains the necessary permissions for them to work even in Enforcing. All you need to do is flash the package of your choice.
Installation
You will need latest radio (2.0.50.2.30) and latest bootloader (HHZ20h)
Latest TWRP recovery is highly recommended
If you want HDR to work, you will need to keep Google Camera 3.2.045 (all newer versions won't work)
If coming from any other ROM
- Backup first... always backup first
- Wipe system, data, cache and dalvik cache
- Install DARK ROM
- Install provided GAPPS (mandatory)
- Install root package of your choice (I recommend Magisk)
Enjoy !
If coming from a previous build of mine
- Backup (you know it)
- Dirty flash DARK ROM
- Install root package of your choice
Enjoy! (if anything goes wrong, clean flash)
Download
To download the whole ROM
https://www.androidfilehost.com/?fid=817550096634786608
Source code
GitHub-https://github.com/darkeyes84
kernel- https://github.com/LineageOS/android_kernel_asus_msm8916
Thanks and credit-
@govind1233
Click to expand...
Click to collapse
Does it have build-in gapps??

gapps build is coming soon...i compiled with stock gapps then size of rom became 900+ mb so compiling with micro and pico gapps

govind1233 said:
gapps build is coming soon...i compiled with stock gapps then size of rom became 900+ mb so compiling with micro and pico gapps
Click to expand...
Click to collapse
Ok,, is this ROM come with all the google pixel features??

mg712702 said:
Ok,, is this ROM come with all the google pixel features??
Click to expand...
Click to collapse
except boot...for all rounded icons u need to install pixel launcher as system app

govind1233 said:
except boot...for all rounded icons u need to install pixel launcher as system app
Click to expand...
Click to collapse
Ok ...just downloading will flash tomorrow
---------- Post added at 07:13 PM ---------- Previous post was at 07:13 PM ----------
And bro is it official or unofficial??

Wow, nice to have another option in a near Pixel experience. Any chance of this becoming official so we can get delta updates?
Thanks buddy!
PS: Would be great to share the links to Arise, custom GApps and Extras from Dark Rom on the OP.

zackwire said:
Wow, nice to have another option in a near Pixel experience. Any chance of this becoming official so we can get delta updates?
Thanks buddy!
PS: Would be great to share the links to Arise, custom GApps and Extras from Dark Rom on the OP.
Click to expand...
Click to collapse
Let me stabilize rom to a good level...I mean it is stable but want to make more stable and battery friendly... Then I will ask owner for official status...

Thankuh so much man . this is the only rom on which i could use google tez .in other roms no matter what i do.it always fails the security check. Again thankuh so much appreciate your work.

jitu nayak cvrce said:
Thankuh so much man . this is the only rom on which i could use google tez .in other roms no matter what i do.it always fails the security check. Again thankuh so much appreciate your work.
Click to expand...
Click to collapse
Ever heard of Magisk hide and safteynet fix?

TheImpulson said:
Ever heard of Magisk hide and safteynet fix?
Click to expand...
Click to collapse
I have tried magisk hide ,even i relocked my bootloader .but nothing comes handy...:silly: safety net fix..not tried yet

jitu nayak cvrce said:
I have tried magisk hide ,even i relocked my bootloader .but nothing comes handy...:silly: safety net fix..not tried yet
Click to expand...
Click to collapse
Well, works fine when I use Magisk hide.

TheImpulson said:
Well, works fine when I use Magisk hide.
Click to expand...
Click to collapse
Apparently MagiskHide doesn't work on FGO

[ROM][UNOFFICIAL][Android 12]Tomatolei ROM for S10/S10+ v26 UI1 OneUI 3.1

Hello everyone, I'm back. The previous post didn't provide the kernel source code. The administrator said that it needs to be closed. Now I have submitted the source code
Tomatolei ROM features
--Status bar time format customization
--Status bar advanced network speed
--Status bar alarm clock, Bluetooth, voice icon switch
--Status bar left middle right virtual key customization
--Status bar drop-down lunar calendar
--Status bar drop down ambiguity adjustment
--Status bar signal WiFi icon switch
--Lock screen Chinese calendar display switch
--USB plug and unplug bright screen switch
--Advanced power menu
--Home screen icon text switch
--Home screen double click Custom
--Table weather lunar switch
--Some other programs disable scripts
Tomato S10 26th Edition
2021-09-16
--New ui1 bottom package
--Apply regular Android security patches
--Improve equipment safety
--Some software updates
--Other details update
Click to expand...
Click to collapse
Tomato garden S10 / S10 + v25 update log
Android version: 25
System version: G9730ZCU6FUH5/G9750ZCU6FUH5
Tomato S10 25th Edition
Click to expand...
Click to collapse
2021-09-02
--New UH5 bottom bag
--Improved the overall stability of the device
--Apply the latest Android security patch
--Improved the safety of the equipment
--Updated fingerprint payment module v4.0
--Updated LSP and other software
--Remove the install button from Samsung Store displayed when manually installing the apk
-Modify the Samsung Colorful Keyboard to support the layout of the Bank of China
--- Added WIFI password viewer
--Partial software update
--Other details update
Click to expand...
Click to collapse
2021-08-25
--New version of UF1 bottom bag
--Apply regular security patches for Android
--Improve equipment safety
--Updated NFS X6
--Pomodoro settings, advanced settings, one-click disable and delete increase the disable and delete of game tools
--Updated software and modules
--Add SamHelp, a powerful personalized software
--Partial software update
--Other details update
Click to expand...
Click to collapse
2021-06-06
--New UE2 bottom bag
--Improved the performance of the camera
--Enhanced quick sharing
--Optimized the experience of sharing files between Galaxy devices using Quick Share
--Apply the latest Android security patch
--Improved the safety of the equipment
--Added the switch (vip) whether to turn on scanning for threats when installing apk
--After removing the installation apk, show recommended apps
--Add many V4A DDC and pulse samples (vip)
--Update LSP and RIRU to the latest version
--Other details update
Click to expand...
Click to collapse
2021-05-14
--New version G9730ZCU5FUD2/G9750ZCU5FUD2
--Improved performance-camera
--Problem fix
--Improved compatibility with third-party applications
--Improved the overall stability of the function
--Apply the latest Android security patch
--Improved the safety of the equipment
--Tomato kernel compiled with the latest source code
--Update Magisk v23
--Add Samsung colorful keyboard switch (vip)
--Update the latest version of edxp LSP
--Optimized the steps to install the module frame
--Other details modification
Click to expand...
Click to collapse
2021-03-26
--New version G9730ZCU5FUC2/G9730ZCU5FUC2
--Oneui3.1
--Update riru, the latest version of LSP
--Further fine-tune the blank distance of the left and right measurement of the status bar
--Fixed the problem that the previous version did not install the Google Store successfully
--Fixed the problem that magisk was a system file for the first time before
--Other details update
2021-03-09
--New version G9730ZCU4EUBB/G9750ZCU4EUBB
--Android 11, OneUI 3.1 first version
--New UBB bottom bag
--Added the Block rogue software management tool, which can disable software services. For example, when the Agricultural Bank of China disables a certain service, it will be turned on without crash
--Update the latest version of LSP
--Other details update
Click to expand...
Click to collapse
2021-02-05
--G9750ZCU4EUA9
--Android 11, OneUI 3.0 first version
--The latest source code compiles tomato kernel
--Join LSPosed frame selection
--Update the latest magisk v21.4 and Magisk Manager 8.07
--Heavier the latest edpx and fingerprint payment module
--Other details update
2020-11-30
--New g9730zcs4dtj2 / g9750zcs4dtj2
--Update the latest version of tomato kernel
--Update the latest v21 magick and magick app 8.03
--Add one key to replace the mask of renamed version, without user VPN to rename (VIP)
--Add se mode permission and mandatory switch (VIP)
--Update NFS module x4, NFS and developer options do not conflict
--Updated V4A sound module to the latest version (VIP)
--Other details updated
2020-11-10
--New g9730zcs4dtj1 / g9750zcs4dtj1
--Add tomato settings, there is a key to change the name, no user VPN to change the name
--Avoid ABC, 12123, ICBC, wangzhe and other software to detect the mask flicker back or not to use
--Fixed the problem of missing magick in the previous version
--Other details updated
2020-10-13
--New g9730zcu4dth7 / g9750zcu4dth7
--Oneui 2.5, may need to upgrade the bottom package
--Add drop-down battery temperature, color, size, height, style customization (VIP)
--Add navigation bar height adjustment (VIP)
--Magick is converted to user app, which is convenient to change the name of random package to deal with 12123. Apps such as ICBC detect that the name of magick package cannot be used
--Magick change random package name tutorial to see tomato settings, other settings, magick hide the ultimate solution
--Other details updated
This version needs to upgrade the official firmware to oneui 2.5. It may not boot without upgrading
2020-08-05
--Latest g9750zcs4ctg2 bottom package
--Update nfs-x3
--Add BTS on / off animation (VIP)
--Other details updated
2020-07-17
--Latest g9750zcs4ctg1 bottom package
--Update the latest version of RuRu
--Magick one click repair perfect magic hide list and tomato update website
--Add status bar virtual key to end the process function
--Optimize the problem that the bottom text will not be displayed after the lock screen weather is turned on
--Add security folder
2020-06-16
--Latest oneui 2.1 g9750zcu3cte9 Android 10 bottom package production
--Recompile the kernel, fix the problem of opening and error reporting of some software such as ABC, Ping An, etc
--Modification can directly install the old version of the program to retain data, such as WeChat downgrading the old version
--Modify tips that cannot be screenshots due to security policy, such as the wallpaper of theme store can be screenshots
--Modify the virtual key in the status bar, add screenshots, clear memory and other options
--Optimize the left margin of the status bar, make the space smaller, and make more space in the status bar better
--Oneui 2.5 weather update
--Update the latest version of appbooster
--Modify the oneui main screen to add 2 icons at the bottom, up to 7 icons in 1 row
--Adjust weather height and multi range of lock screen (VIP)
--Add nfs-injector performance module x2
--Add S20 ring tone
--5g forced style changed to S20 style frameless (VIP)
--Update edxp and Magic
--Improve the installation mode of brush package and change it to img format for more stable installation
--Update some system programs
Click to expand...
Click to collapse
Thanks list
@ianmacd https://github.com/ianmacd
@SuperR. https://forum.xda-developers.com/member.php?u=5787964
Need attention
The latest V13 ROM is swiped in by img installation, so it's possible that your mobile phone can be swiped in only when it's a partition of the Chinese system. The system size of the Hong Kong system is different from that of the Chinese system. If you encounter a swipe in error, it's recommended to swipe the S10 / S10 + official firmware of the Chinese version. You can use samfirm_ V0.4.1 to download, model sm-g9750, operator CHC。
It is recommended to back up mobile phone data
If you can understand it, because I use Google to translate Chinese
TWRP Source code
https://github.com/tomatolei/device_samsung_beyond2qltechn
Kernel Source code
https://github.com/tomatolei/Samsung_kernel_beyond2qltechn_SM-G9750
ROM download link
https://mega.nz/folder/2xJRFQyT#lx3EiyTQzf6gyJjdJhbN1Q

Glad you back, sir....
Sent from my SM-G9750 using Tapatalk

Im thinking of buying this specific device the G9750, the specs are so perfect for my needs but there is a little twist so Id like opinions.
Im a web developer, I played with many ROMs on many devices but I never built something myself as I don't have tons of knowledge on porting/building ROMs, but I am willing to put in the time and effort. Is this device suitable from a developer stand point? cause Im struggling to find a device (that I can afford) with as good of a hardware and lots of dev support. Will I be able to fork an AOSP build (after getting more knowledge ofc), will it be possible to port some functionality or libraries from the Exynos variant, etc...
Any opinion is appreciated, Im just starting on this but Im hopping I can pickup fast enough since Im not totally new. Thanks to everyone in advance.

Welcome back - we have missed you!
Would this version be fine to dirty flash over V12?
Many Thanks and loving your rom my friend.

FYI - Dirty flash worked great over v12 but had to flash magisk again.
Big thanks for the update.
Is there anyway to remove the chinese writing by the date in the drop down status bar?

Sir,can you build kernel for s10+ with PWM flickerfree ?
https://forum.xda-developers.com/galaxy-s8+/development/amoled-pwm-s8-t3716663

Loco007 said:
FYI - Dirty flash worked great over v12 but had to flash magisk again.
Big thanks for the update.
Is there anyway to remove the chinese writing by the date in the drop down status bar?
Click to expand...
Click to collapse
try that "off"View attachment 5051893
Sent from my SM-G9750 using Tapatalk

Vuska said:
try that "off"
Click to expand...
Click to collapse
Tried that thanks but then you loose the whole date, still need the date but hoping to remove the chinese writing beside it if possible, cheers

hows the stability part of this ROM? I can see there is a lot custimisation in this ROM. Has anyone compared it with Beyond ROM level of stability?
Great work chef. Cheers

Loco007 said:
FYI - Dirty flash worked great over v12 but had to flash magisk again.
Big thanks for the update.
Is there anyway to remove the chinese writing by the date in the drop down status bar?
Click to expand...
Click to collapse
please find Drop-down time,date and status bar ---> Drop-down lunar data display --->off

tomatolei said:
please find Drop-down time,date and status bar ---> Drop-down lunar data display --->off
Click to expand...
Click to collapse
Hi, thanks for the reply.
Have tried this and does not work.
I'll try a full fresh install and see if that helps.
Thanks,

I'm glad to see you back here on XDA
I was trying to find your Rom and other files everywhere without success.
I'm gonna root my S10 as soon as possible and flash your Rom

Loco007 said:
Hi, thanks for the reply.
Have tried this and does not work.
I'll try a full fresh install and see if that helps.
Thanks,
Click to expand...
Click to collapse
I just clean flashed the Rom and I have the same problem with the lunar date.

hi im use s10+ g975f exynoxs cpu can flash this rom？because after update very hot

kelvin199997 said:
hi im use s10+ g975f exynoxs cpu can flash this rom？because after update very hot
Click to expand...
Click to collapse
No, youcan not

HI, I've falshed this Rom recently and now I don't receive WhatsApp or Gmail notifications (except if I open the App)
Someone have an idea why I face this please ?

tomatolei said:
Hello everyone, I'm back. The previous post didn't provide the kernel source code. The administrator said that it needs to be closed. Now I have submitted the source code
Tomatolei ROM features
--Status bar time format customization
--Status bar advanced network speed
--Status bar alarm clock, Bluetooth, voice icon switch
--Status bar left middle right virtual key customization
--Status bar drop-down lunar calendar
--Status bar drop down ambiguity adjustment
--Status bar signal WiFi icon switch
--Lock screen Chinese calendar display switch
--USB plug and unplug bright screen switch
--Advanced power menu
--Home screen icon text switch
--Home screen double click Custom
--Table weather lunar switch
--Some other programs disable scripts
Thanks list
@ianmacd https://github.com/ianmacd
@SuperR. https://forum.xda-developers.com/member.php?u=5787964
Need attention
The latest V13 ROM is swiped in by img installation, so it's possible that your mobile phone can be swiped in only when it's a partition of the Chinese system. The system size of the Hong Kong system is different from that of the Chinese system. If you encounter a swipe in error, it's recommended to swipe the S10 / S10 + official firmware of the Chinese version. You can use samfirm_ V0.4.1 to download, model sm-g9750, operator CHC。
It is recommended to back up mobile phone data
If you can understand it, because I use Google to translate Chinese
TWRP Source code
https://github.com/tomatolei/device_samsung_beyond2qltechn
Kernel Source code
https://github.com/tomatolei/Samsung_kernel_beyond2qltechn_SM-G9750
ROM download link
https://mega.nz/folder/2xJRFQyT#lx3EiyTQzf6gyJjdJhbN1Q
Click to expand...
Click to collapse
Bro,can you build a flicker free function in kernel like s7-9? kernel sources are in s7-9 themes

slutman said:
HI, I've falshed this Rom recently and now I don't receive WhatsApp or Gmail notifications (except if I open the App)
Someone have an idea why I face this please ?
Click to expand...
Click to collapse
1. Go to app info of each apps. -- Battery -- Optimize battery usage -- make whatsapp (etc) set not to optimized.
2. Device Care -- Battery -- App Power Management -- App that won't be put to sleep -- Add your apps

Vuska said:
1. Go to app info of each apps. -- Battery -- Optimize battery usage -- make whatsapp (etc) set not to optimized.
2. Device Care -- Battery -- App Power Management -- App that won't be put to sleep -- Add your apps
Click to expand...
Click to collapse
Thanks for your reply.
I could set 'not to optimzed' the apps.
I couldn't find the menu 'App Power Management' where to add apps to set 'not to sleep'
I'll search more about that
For now I'll see if there is already a difference.

slutman said:
Thanks for your reply.
I could set 'not to optimzed' the apps.
I couldn't find the menu 'App Power Management' where to add apps to set 'not to sleep'
I'll search more about that
For now I'll see if there is already a difference.
Click to expand...
Click to collapse
Under Device Care at setting...
[emoji120]View attachment 5062855
Sent from my SM-G9750 using Tapatalk