I have a Moto G 5G Plus XT2075-3.
Code:
fastboot oem get_unlock_data
fastboot oem unlock <Motorola code>
Then I tried the TWRP:
Code:
fastboot flash recovery twrp-3.5.0_9-0-potter.img
Now I realise that this one is for the Moto G5 Plus, therefore, when I power on the phone, I now only get:
No valid operating system could be found
The device will not boot
Any help?
EDIT
BTW I can still enter in fastboot with volume-power and
Code:
fastboot devices
shows the phone.
boringtech said:
I have a Moto G 5G Plus XT2075-3.
Code:
fastboot oem get_unlock_data
fastboot oem unlock <Motorola code>
Then I tried the TWRP:
Code:
fastboot flash recovery twrp-3.5.0_9-0-potter.img
Now I realise that this one is for the Moto G5 Plus, therefore, when I power on the phone, I now only get:
No valid operating system could be found
The device will not boot
Any help?
EDIT
BTW I can still enter in fastboot with volume-power and
Code:
fastboot devices
shows the phone.
Click to expand...
Click to collapse
you can't flash to recovery because there is no recovery partition anymore.
recovery is part of boot partition with devices that have a/b system
what does getvar say
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
you can't flash to recovery because there is no recovery partition anymore.
recovery is part of boot partition with devices that have a/b system
what does getvar say
Click to expand...
Click to collapse
I have obfuscated a couple of things I believe are not necessary. Let me know if you need it.
Code:
> fastboot getvar all
kernel: uefi
version-bootloader: MBM-3.0-nairo_retail-***59-200618
product: nairo
board: nairo
secure: yes
hwrev: PVT
radio: EMLA
storage-type: UFS
emmc: N/A
ufs: 64GB SKhynix H9HQ53ACPMMDAR FV=0004
ram: 4GB SKHYNIX LP4x DIE=16Gb ***
cpu: SM_SAIPAN 2.0
serialno: ***
cid: 0x0032
channelid: 0x00
uid: ***
securestate: flashing_unlocked
factory-modes: disabled
verity-state: enforcing (0)
iswarrantyvoid: yes
max-download-size: 805306368
reason: Volume down key pressed
imei: ***
imei2: ***
meid:
date: 06-26-2020
sku: XT2075-3
carrier_sku: XT2075-3
battid: SB18C74374
battery-voltage: 4420
iccid:
cust_md5:
max-sparse-size: 268435456
poweroffalarm: 0
ro.carrier: vfeu
ro.build.fingerprint[0]: motorola/nairo_retaile/nairo:10/QP
ro.build.fingerprint[1]: ****:user/release-key
ro.build.fingerprint[2]: s
ro.build.version.qcom: LA.UM.8.13.r1-08000-SAIPAN.0
version-baseband[0]: M7250_*** NAIRO_EMLADS
version-baseband[1]: DS_CUST
kernel.version[0]: Linux version 4.19.81-perf+ ([email protected]
kernel.version[1]: oid-build) (clang version 8.0.12 for And
kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Jun 18 10:3
kernel.version[3]: 4:55 CDT 2020
git:xbl: MBM-3.0-nairo_retail-0e78f0bb3-200618
git:xbl_config: MBM-3.0-nairo_retail-0e78f0bb3-200618
git:abl: MBM-3.0-nairo_retail-***-200618
git:aop: MBM-3.0-nairo_retail-***-200618
git:tz: MBM-3.0-nairo_retail-***-200618
git:hyp: MBM-3.0-nairo_retail-***-200618
git:devcfg: MBM-3.0-nairo_retail-***-200618
git:keymaster: MBM-3.0-nairo_retail-***-200618
git:storsec: MBM-3.0-nairo_retail-***-200618
git:uefisecapp: MBM-3.0-nairo_retail-***-200618
git:prov: MBM-3.0-nairo_retail-***-200618
git:qupfw: MBM-3.0-nairo_retail-***-200618
frp-state: no protection (0)
current-slot: a
running-bl-slot: _a/_a
running-boot-lun: 1
slot-count: 2
slot-successful:_a: no
slot-successful:_b: no
slot-unbootable:_a: no
slot-unbootable:_b: no
slot-retry-count:_a: 7
slot-retry-count:_b: 0
logical-block-size: 0x1000
erase-block-size: 0x1000
is-userspace: no
pcb-part-no: ***
EDIT:
Removed (bootloader) for readability
boringtech said:
I have obfuscated a couple of things I believe are not necessary. Let me know if you need it.
Code:
> fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nairo_retail-***59-200618
(bootloader) product: nairo
(bootloader) board: nairo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EMLA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SKhynix H9HQ53ACPMMDAR FV=0004
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb ***
(bootloader) cpu: SM_SAIPAN 2.0
(bootloader) serialno: ***
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: ***
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 805306368
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***
(bootloader) imei2: ***
(bootloader) meid:
(bootloader) date: 06-26-2020
(bootloader) sku: XT2075-3
(bootloader) carrier_sku: XT2075-3
(bootloader) battid: SB18C74374
(bootloader) battery-voltage: 4420
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: vfeu
(bootloader) ro.build.fingerprint[0]: motorola/nairo_retaile/nairo:10/QP
(bootloader) ro.build.fingerprint[1]: ****:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.qcom: LA.UM.8.13.r1-08000-SAIPAN.0
(bootloader) version-baseband[0]: M7250_*** NAIRO_EMLADS
(bootloader) version-baseband[1]: DS_CUST
(bootloader) kernel.version[0]: Linux version 4.19.81-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.12 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Jun 18 10:3
(bootloader) kernel.version[3]: 4:55 CDT 2020
(bootloader) git:xbl: MBM-3.0-nairo_retail-0e78f0bb3-200618
(bootloader) git:xbl_config: MBM-3.0-nairo_retail-0e78f0bb3-200618
(bootloader) git:abl: MBM-3.0-nairo_retail-***-200618
(bootloader) git:aop: MBM-3.0-nairo_retail-***-200618
(bootloader) git:tz: MBM-3.0-nairo_retail-***-200618
(bootloader) git:hyp: MBM-3.0-nairo_retail-***-200618
(bootloader) git:devcfg: MBM-3.0-nairo_retail-***-200618
(bootloader) git:keymaster: MBM-3.0-nairo_retail-***-200618
(bootloader) git:storsec: MBM-3.0-nairo_retail-***-200618
(bootloader) git:uefisecapp: MBM-3.0-nairo_retail-***-200618
(bootloader) git:prov: MBM-3.0-nairo_retail-***-200618
(bootloader) git:qupfw: MBM-3.0-nairo_retail-***-200618
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 1
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x1000
(bootloader) erase-block-size: 0x1000
(bootloader) is-userspace: no
(bootloader) pcb-part-no: ***
Click to expand...
Click to collapse
I'm not seeing this line
Code:
bootloader) ro.carrier:
Which tells you which software channel it's on.
I'm on mobile browser so it may just be hidden.
If you have a Window PC I would try LMSA'S flash rescue option
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
I see it now
Code:
bootloader) ro.carrier: vfeu
Looks like you removed the ro.build.fingerprint
which tells you which software version you have.
Product = codename
securestate = bootloader locked or unlocked
carrier_sku = Model #
ro.carrier = Software Channel
ro.build.fingerprint = Software version See post #7
ro.build.version.full = Software version See post #7
Newest firmware is
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
XT2075-3_NAIRO_RETAPAC_TH_10_QPN30.37-Q3-42-62_subsidy-DEFAULT_regulatory-XT2075-3-NTC_CFC.xml.zip
with software version 30.37-Q3-42-62
sd_shadow said:
I see it now
Code:
bootloader) ro.carrier: vfeu
Click to expand...
Click to collapse
By the way, I removed (bootloader) everywhere for readability. You already see ro.carrier is vfeu.
I am on Linux, but I can setup a Windows Virtual Machine
boringtech said:
By the way, I removed (bootloader) everywhere for readability. You already see ro.carrier is vfeu.
I am on Linux, but I can setup a Windows Virtual Machine
Click to expand...
Click to collapse
Linux is fine just cannot use LMSA.
Download the firmware I linked if it matches the device, software channel, and version.
Unzip, find serviefile.xml, open with text editor, copy all text.
Go to https://kfhost.net/flashfile paste the service.xml text in flashfile box
copy the new fastboot commands
Use the fastboot commands
sd_shadow said:
Looks like you removed the ro.build.fingerprint
which tells you which software version you have.
Product = codename
securestate = bootloader locked or unlocked
carrier_sku = Model #
ro.carrier = Software Channel
ro.build.fingerprint = Software version See post #7
ro.build.version.full = Software version See post #7
Newest firmware is
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
XT2075-3_NAIRO_RETAPAC_TH_10_QPN30.37-Q3-42-62_subsidy-DEFAULT_regulatory-XT2075-3-NTC_CFC.xml.zip
with software version 30.37-Q3-42-62
Click to expand...
Click to collapse
Here you are:
Product = nairo
securestate = flashing_unlocked
carrier_sku = XT2075-3
ro.carrier = vfeu
ro.build.fingerprint[0] = motorola/nairo_retaile/nairo:10/QP
ro.build.fingerprint[1] = N30.33-27-1/b843f:user/release-key
ro.build.fingerprint[2] = s
ro.build.version.qcom = LA.UM.8.13.r1-08000-SAIPAN.0
Note that there is no ro.build.version.full variable.
boringtech said:
Here you are:
Product = nairo
securestate = flashing_unlocked
carrier_sku = XT2075-3
ro.carrier = vfeu
ro.build.fingerprint[0] = motorola/nairo_retaile/nairo:10/QP
ro.build.fingerprint[1] = N30.33-27-1/b843f:user/release-key
ro.build.fingerprint[2] = s
ro.build.version.qcom = LA.UM.8.13.r1-08000-SAIPAN.0
Note that there is no ro.build.version.full variable.
Click to expand...
Click to collapse
Looks like you have Dual sim version?
See notice at top of firmware page
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
@sd_shadow
As regards Lenovo Rescue and Smart Assistant (LMSA), I tried both a Virtual Machine and physical Windows PC and, when I try to rescue, I get:
"Unable to match appropriate firmware. Some key information cannot be read from the device."
As regards the file you posted:
XT2075-3_NAIRO_RETAPAC_TH_10_QPN30.37-Q3-42-62_subsidy-DEFAULT_regulatory-XT2075-3-NTC_CFC.xml.zip
If I properly understand the logic, QPN30.37-Q3-42-62 is not what I need, based on my vars:
Product = nairo
securestate = flashing_unlocked
carrier_sku = XT2075-3
ro.carrier = vfeu
ro.build.fingerprint[0] = motorola/nairo_retaile/nairo:10/QP
ro.build.fingerprint[1] = N30.33-27-1/b843f:user/release-key
ro.build.fingerprint[2] = s
ro.build.version.qcom = LA.UM.8.13.r1-08000-SAIPAN.0
I confirm my phone is a dual SIM. I did not understand where is the "notice on top of firmware page" that you mentioned.
boringtech said:
@sd_shadow
I confirm my phone is a dual SIM. I did not understand where is the "notice on top of firmware page" that you mentioned.
Click to expand...
Click to collapse
Spoiler: This page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sd_shadow said:
Spoiler: This page
View attachment 5183631
Click to expand...
Click to collapse
Thanks a lot.
The site as displayed in Firefox is quite different. It is more similar to your screenshot, if using in Chromium, but still without the notice.
Anyway my P/N is PAK90011IS and the carrier_sku = XT2075-3. So it does not seem to fall into those listed in the notice.
The most similar firmware package I found on lolinet.com is:
XT2075-3_NAIRO_VFEU_10_QPN30.33-42_subsidy-VFGB_regulatory-DEFAULT_CFC.xml.zip
The file is filed both under:
firmware/moto/nairo/official/VFEU/
and
firmware/motorola/nairo/official/VFEU
However, based on my variables below, the image does not seem to match:
Product = nairo
securestate = flashing_unlocked
carrier_sku = XT2075-3
ro.carrier = vfeu
ro.build.fingerprint[0] = motorola/nairo_retaile/nairo:10/QP
ro.build.fingerprint[1] = N30.33-27-1/b843f:user/release-key
ro.build.fingerprint[2] = s
ro.build.version.qcom = LA.UM.8.13.r1-08000-SAIPAN.0
In the filename I have QPN30.33-42, but I think I should have QPN30.33-27-1.
Is my speculation correct?
Related
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
EDIT: I managed to get this info too:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZL62225459
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 8122A81100000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351844090939113
(bootloader) meid:
(bootloader) date: 05-18-2018
(bootloader) sku: XT1922-3
(bootloader) carrier_sku: XT1922-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Mar 28 11:32:34 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/aljeter/aljeter:9/PPPS29.
(bootloader) ro.build.fingerprint[1]: 55-25-2/06dbf:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.2.aljeter.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gccbc3e0 (hu
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20
(bootloader) kernel.version[2]: 150123 (prerelease) (GCC) ) #1 SMP PREEM
(bootloader) kernel.version[3]: PT Thu Mar 28 06:11:01 CDT 2019
(bootloader) sbl1.git: MBM-2.1-aljeter_retail-b867b3e-190122
(bootloader) rpm.git: MBM-2.1-aljeter_retail-099a494-dirty-190328
(bootloader) tz.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) devcfg.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) keymaster.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib64.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) prov.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) aboot.git: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.074s
Did you already try to unlock the bootloader. You could then fastboot flash a stock rom from here https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETAIL/
It worked finally, I was confused which software is the right one. Thanks!
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
My moto g6 play 1922-5 ta so too. Can you solve it?
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
Moto G8 Play
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button , in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters...
...
...
...To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.
If you have ROM related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!
Supporters: If you want to be put on or off the list, just make a request here in the thread!
Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
FAQs for Device Thread link
Index for Device Thread Link
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
FAQs
UnLocking the Bootloader
ReLocking the Bootloader
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Fixing your Moto stuck in Qualcomm QHSUSB_Bulk or qloader mode
Unfortunately LMSA doesn't work with G8 Play -14 April 2020
[*]Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
Custom Roms/Recovery/Root/
Firmware
Firmware should be avalible here
https://mirrors.lolinet.com/firmware/moto/
Specs
Help Please !
Hi to everyone, i've seen all the guides you post but i cant find the correct frimware for my moto g8 play, i have tried a few lima pmds 99.70-81-5 but anything seems to work :c, also i havent unlocked OEM so i need to install the same firmware version to unbrick it :c, can anyone help me to find the correct one? Thanks for all your guides !
version: 0.5
version-bootloader: MBM-2.1-lima_32_retail-210600d2e-200306
product: lima
board: lima
secure: yes
hwrev: PVT
radio: 2
storage-type: eMMC
emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
cpu: MT6771V/WL
serialno: ZY2274B5F3
cid: 0x0032
channelid: 0x0a
uid: 64D5498EF4027FFC000000000000
securestate: oem_locked
factory-modes: disabled
iswarrantyvoid: no
max-download-size: 268435456
reason: No bootable A/B slot
imei: 359100103691791
imei2:
meid:
date: 12-07-2019
sku: XT2015-2
carrier_sku: XT2015-2
battid: SB18C51711
iccid:
max-sparse-size: 268435456
current-time: "Tue Jan 1 1: 4:28 UTC 2019"
ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMDS29.70-
ro.build.fingerprint[1]: 81-5/1fa4a:user/release-keys
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.29.201.7.lima_32.ret
ro.build.version.full[1]: ail.en.US
ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
version-baseband: <not found>
kernel.version[0]: Linux version 4.4.146+ ([email protected]
kernel.version[1]: 159) (gcc version 4.9.x 20150123 (prerel
kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Thu Jun 25
kernel.version[3]: 08:09:39 CDT 2020
frp-state: protected (144)
ro.carrier: tefmx
current-slot: a
running-boot-lun: 0
running-slot: _a
slot-successful:_a: no
slot-successful:_b: no
slot-bootable:_a: no
slot-bootable:_b: no
slot-retry-count:_a: 0
slot-retry-count:_b: 0
slot-suffixes: _a,_b
slot-count: 2
pcb-part-no: SB28C70228
all: listed above
strako777 said:
Hi to everyone, i've seen all the guides you post but i cant find the correct frimware for my moto g8 play, i have tried a few lima pmds 99.70-81-5 but anything seems to work :c, also i havent unlocked OEM so i need to install the same firmware version to unbrick it :c, can anyone help me to find the correct one? Thanks for all your guides !
version: 0.5
version-bootloader: MBM-2.1-lima_32_retail-210600d2e-200306
product: lima
board: lima
secure: yes
hwrev: PVT
radio: 2
storage-type: eMMC
emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
cpu: MT6771V/WL
serialno: ZY2274B5F3
cid: 0x0032
channelid: 0x0a
uid: 64D5498EF4027FFC000000000000
securestate: oem_locked
factory-modes: disabled
iswarrantyvoid: no
max-download-size: 268435456
reason: No bootable A/B slot
imei: 359100103691791
imei2:
meid:
date: 12-07-2019
sku: XT2015-2
carrier_sku: XT2015-2
battid: SB18C51711
iccid:
max-sparse-size: 268435456
current-time: "Tue Jan 1 1: 4:28 UTC 2019"
ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMDS29.70-
ro.build.fingerprint[1]: 81-5/1fa4a:user/release-keys
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.29.201.7.lima_32.ret
ro.build.version.full[1]: ail.en.US
ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
version-baseband: <not found>
kernel.version[0]: Linux version 4.4.146+ ([email protected]
kernel.version[1]: 159) (gcc version 4.9.x 20150123 (prerel
kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Thu Jun 25
kernel.version[3]: 08:09:39 CDT 2020
frp-state: protected (144)
ro.carrier: tefmx
current-slot: a
running-boot-lun: 0
running-slot: _a
slot-successful:_a: no
slot-successful:_b: no
slot-bootable:_a: no
slot-bootable:_b: no
slot-retry-count:_a: 0
slot-retry-count:_b: 0
slot-suffixes: _a,_b
slot-count: 2
pcb-part-no: SB28C70228
all: listed above
Click to expand...
Click to collapse
I believe you should be using lima_32
https://mirrors.lolinet.com/firmware/moto/lima_32/official/TIMBR/
Flashing firmware with an locked bootloader is tricky sometimes
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
But I recommend trying LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
dont know what to do :C
sd_shadow said:
I believe you should be using lima_32
https://mirrors.lolinet.com/firmware/moto/lima_32/official/TIMBR/
Flashing firmware with an locked bootloader is tricky sometimes
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
But I recommend trying LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
I alredy tried a few variants of Lima_32 (Tefmx because of the rio.carrier, retail, retla, openmx,timbr) and all of this was on the PMDS 29.70-81-5, didnt know what to, i read somewhere that i need to install the same factory firmware to avoid the"Startup Failed" Error or rather the lastest firmware, you think that if i wait to a new firmware update cold be able to install it? why i cant boot with any firmware ?
Help!! I installed a ROM in my moto g8 play and doesn´t respond
Hi to everyone, i have seeing old guide´s to recover urs motorolas devices
my problem is that i installed a different ROM on my devices and now doesn´t boot
when i run
[fastboot getvar all]
the CMD respond with this
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-b64a50bf6-211028
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=01 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY2278J5NG
(bootloader) cid: 0x0032
(bootloader) channelid: 0x23
(bootloader) uid: E2BC718F707B06B3000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jan 14 15:57:56 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -33-5/7e278:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Thu Oct 28
(bootloader) kernel.version[3]: 10:57:32 CDT 2021
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: attmx
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
the problem in this case is tnat i installed a new ROM, at this point all was ok but after that i installed a new one i don´t check correctly the name and i finally installed QMDS30.47-33-5/7e278:user/release-keys0 and my devides accept LIMA_32_PMDS29.70-85-3_subsidy-IUSMXLA_regulatory-XT2015_2_IFETEL_CFC
as the original ROM i don´t understand whats the problem right now ´cause i installed all in the correct order, my conclusion was that i installed a different ROM no compatible with my motorola device and now as it says up here the problem is no bootalbe slot a/b and now is stucked on a no compatible ROM and it doesn´t boot also the OEM is locked and isn´t rootable, someone who can help me pls. i realy need the cellphone its my unic work tool and metod of comunication. THNKS for read
FrxncLpz said:
Help!! I installed a ROM in my moto g8 play and doesn´t respond
Hi to everyone, i have seeing old guide´s to recover urs motorolas devices
my problem is that i installed a different ROM on my devices and now doesn´t boot
when i run
[fastboot getvar all]
the CMD respond with this
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-b64a50bf6-211028
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=01 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY2278J5NG
(bootloader) cid: 0x0032
(bootloader) channelid: 0x23
(bootloader) uid: E2BC718F707B06B3000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-13-2020
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jan 14 15:57:56 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:10/QMDS30.47
(bootloader) ro.build.fingerprint[1]: -33-5/7e278:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.mtk: alps-mp-q0.mp1.tc2sp-V1.53
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.14.141+ ([email protected]
(bootloader) kernel.version[1]: build) (gcc version 4.9.x 20150123 (prer
(bootloader) kernel.version[2]: elease) (GCC)) #1 SMP PREEMPT Thu Oct 28
(bootloader) kernel.version[3]: 10:57:32 CDT 2021
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: attmx
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
the problem in this case is tnat i installed a new ROM, at this point all was ok but after that i installed a new one i don´t check correctly the name and i finally installed QMDS30.47-33-5/7e278:user/release-keys0 and my devides accept LIMA_32_PMDS29.70-85-3_subsidy-IUSMXLA_regulatory-XT2015_2_IFETEL_CFC
as the original ROM i don´t understand whats the problem right now ´cause i installed all in the correct order, my conclusion was that i installed a different ROM no compatible with my motorola device and now as it says up here the problem is no bootalbe slot a/b and now is stucked on a no compatible ROM and it doesn´t boot also the OEM is locked and isn´t rootable, someone who can help me pls. i realy need the cellphone its my unic work tool and metod of comunication. THNKS for read
Click to expand...
Click to collapse
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi, my motorola is locked on the other ROM so if it searhes the unique ROM that its "available" for my phone is the replacement for the new ROM where its stucked and if y try to use de ROM with CMD doesn´t work. I´m realy stucked on this for a mond. :C
EDIT: SOLVED* (can delete)
Type:
Code:
fastboot flashing unlock
then flash as usual....phewww
I was trying to revert to stock Android from a custom rom with an unlocked bootloader.
Something happened that the bootloader re-locked but did not flash the stock firmware properly. (using this signed image: https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-oreo-bootloader-to-stock-t3784621)
Problem #1 seems to be that I cannot flash anything because the bootloader re-locked.
Problem #2 seems to be that I cannot unlock the bootloader either because the phone is in an "invalid boot state" meaning "Allow OEM Unlocking" is supposedly not enabled in Settings > Developer.
Problem #3: When I go into Recovery Mode the device reads "I have loaded a different operating system"
Here is my getvar all:
Code:
[HIDE](bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C1.82
(bootloader) product: addison
(bootloader) board: addison
(bootloader) secure: yes
(bootloader) hwrev: P7
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: #####
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8f
(bootloader) uid: 5CC656CD00000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: #######
(bootloader) meid:
(bootloader) date: 08-30-2016
(bootloader) sku: XT1635-02
(bootloader) battid: SNN5974A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 3:48:49 UTC 1970"
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g174984b (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Mon Mar 26 08:27:14 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC1.82-0-g3523998
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=fbd9875-dirty
(bootloader) devcfg.git: git=fbd9875-dirty
(bootloader) keymaster.git: git=fbd9875-dirty
(bootloader) cmnlib.git: git=fbd9875-dirty
(bootloader) cmnlib64.git: git=fbd9875-dirty
(bootloader) prov.git: git=fbd9875-dirty
(bootloader) aboot.git: git=MBM-NG-VC1.82-0-g345bd7e
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: rcica
all: listed above
finished. total time: 0.322s[/HIDE]
Anyone have any ideas? On how I can get this phone to boot? I don't really care how I get it back to boot, even if its back to a custom rom, at this point I just want it to POST a boot.
I tried the Lenovo Rescue and Smart Assistant tool but the software could not recognise the device.
I was looking at RSD LITE tool. I never used this. Anyone have any experience with this tool?
mzp_user said:
EDIT: SOLVED* (can delete)
Type:
Code:
fastboot flashing unlock
then flash as usual....phewww
I was trying to revert to stock Android from a custom rom with an unlocked bootloader.
Something happened that the bootloader re-locked but did not flash the stock firmware properly. (using this signed image: https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-oreo-bootloader-to-stock-t3784621)
Problem #1 seems to be that I cannot flash anything because the bootloader re-locked.
Problem #2 seems to be that I cannot unlock the bootloader either because the phone is in an "invalid boot state" meaning "Allow OEM Unlocking" is supposedly not enabled in Settings > Developer.
Problem #3: When I go into Recovery Mode the device reads "I have loaded a different operating system"
Here is my getvar all:
Code:
[HIDE](bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C1.82
(bootloader) product: addison
(bootloader) board: addison
(bootloader) secure: yes
(bootloader) hwrev: P7
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: #####
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8f
(bootloader) uid: 5CC656CD00000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: #######
(bootloader) meid:
(bootloader) date: 08-30-2016
(bootloader) sku: XT1635-02
(bootloader) battid: SNN5974A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 3:48:49 UTC 1970"
(bootloader) ro.build.fingerprint: <not found>
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g174984b (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Mon Mar 26 08:27:14 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC1.82-0-g3523998
(bootloader) rpm.git: git=bd19194
(bootloader) tz.git: git=fbd9875-dirty
(bootloader) devcfg.git: git=fbd9875-dirty
(bootloader) keymaster.git: git=fbd9875-dirty
(bootloader) cmnlib.git: git=fbd9875-dirty
(bootloader) cmnlib64.git: git=fbd9875-dirty
(bootloader) prov.git: git=fbd9875-dirty
(bootloader) aboot.git: git=MBM-NG-VC1.82-0-g345bd7e
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: rcica
all: listed above
finished. total time: 0.322s[/HIDE]
Anyone have any ideas? On how I can get this phone to boot? I don't really care how I get it back to boot, even if its back to a custom rom, at this point I just want it to POST a boot.
I tried the Lenovo Rescue and Smart Assistant tool but the software could not recognise the device.
I was looking at RSD LITE tool. I never used this. Anyone have any experience with this tool?
Click to expand...
Click to collapse
I'm having the same problem. Did you find any solution?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi.
I've just bought an unlocked Austarlian model Moto G30. I'd like to install Magisk but I'm having trouble locating a stock rom. No roms are found either by searching, normal connection or fastboot connection by the Lenovo Rescue and Smart Assistance app. A dump from fastboot reads as follows (with serial numbers, IMEIs omitted):
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) product: caprip
(bootloader) board: caprip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: eMMC
(bootloader) emmc: 128GB SAMSUNG DV6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5-M8=01 07 01 12
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: *****
(bootloader) cid: 0x0032
(bootloader) channelid: 0x51
(bootloader) uid: 1AFA7FED
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 804474880
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: *****
(bootloader) imei2: *****
(bootloader) meid:
(bootloader) date: 07-21-2021
(bootloader) sku: XT2129-2
(bootloader) carrier_sku: XT2129-2
(bootloader) battid: SB18C98449
(bootloader) battery-voltage: 3976
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retapac
(bootloader) ro.build.fingerprint[0]: motorola/caprip_retailn/caprip:11/
(bootloader) ro.build.fingerprint[1]: RRC31.Q1-3-34-1/7ff77b:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.9.15.r1-01800-KAMORTA.0
(bootloader) version-baseband[0]: HAK10_18.534.02.65R CAPRIP_EUAPEMDSDS_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.19.136-perf+ ([email protected]
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Tue F
(bootloader) kernel.version[4]: eb 9 10:48:17 CST 2021
(bootloader) git:xbl: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:xbl_config: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:abl: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) git:rpm: MBM-3.0-caprip_retail-f43cd45-210209
(bootloader) git:tz: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:hyp: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:devcfg: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:keymaster: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:storsec: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:uefisecapp: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) gitrov: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:qupfw: MBM-3.0-caprip_retail-349f4d1-210209
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SP69A6PBEP
(bootloader) primary-display: djn_nt36525c_652_vid_display
(bootloader) secondary-display:
all: listed above
finished. total time: 0.244s
So far I've only managed to find one site (under a couple different names/addresses) that has the (bootloader) ro.build.fingerprint[1] and (bootloader) ro.build.fingerprint[2] strings of:
RRC31.Q1-3-34-1/7ff77b:user/release-keys
It doesn't look like the file has been downloaded at all so I'm a little dubious. Can anyone possibly point me to a surer source, or another stock rom that has worked with an Australian moto g30 and Magisk?
Cheers.
cedwich said:
Hi.
I've just bought an unlocked Austarlian model Moto G30. I'd like to install Magisk but I'm having trouble locating a stock rom. No roms are found either by searching, normal connection or fastboot connection by the Lenovo Rescue and Smart Assistance app. A dump from fastboot reads as follows (with serial numbers, IMEIs omitted):
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) product: caprip
(bootloader) board: caprip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: eMMC
(bootloader) emmc: 128GB SAMSUNG DV6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5-M8=01 07 01 12
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: *****
(bootloader) cid: 0x0032
(bootloader) channelid: 0x51
(bootloader) uid: 1AFA7FED
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 804474880
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: *****
(bootloader) imei2: *****
(bootloader) meid:
(bootloader) date: 07-21-2021
(bootloader) sku: XT2129-2
(bootloader) carrier_sku: XT2129-2
(bootloader) battid: SB18C98449
(bootloader) battery-voltage: 3976
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retapac
(bootloader) ro.build.fingerprint[0]: motorola/caprip_retailn/caprip:11/
(bootloader) ro.build.fingerprint[1]: RRC31.Q1-3-34-1/7ff77b:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.9.15.r1-01800-KAMORTA.0
(bootloader) version-baseband[0]: HAK10_18.534.02.65R CAPRIP_EUAPEMDSDS_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.19.136-perf+ ([email protected]
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Tue F
(bootloader) kernel.version[4]: eb 9 10:48:17 CST 2021
(bootloader) git:xbl: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:xbl_config: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:abl: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) git:rpm: MBM-3.0-caprip_retail-f43cd45-210209
(bootloader) git:tz: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:hyp: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:devcfg: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:keymaster: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:storsec: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:uefisecapp: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) gitrov: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:qupfw: MBM-3.0-caprip_retail-349f4d1-210209
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SP69A6PBEP
(bootloader) primary-display: djn_nt36525c_652_vid_display
(bootloader) secondary-display:
all: listed above
finished. total time: 0.244s
So far I've only managed to find one site (under a couple different names/addresses) that has the (bootloader) ro.build.fingerprint[1] and (bootloader) ro.build.fingerprint[2] strings of:
RRC31.Q1-3-34-1/7ff77b:user/release-keys
It doesn't look like the file has been downloaded at all so I'm a little dubious. Can anyone possibly point me to a surer source, or another stock rom that has worked with an Australian moto g30 and Magisk?
Cheers.
Click to expand...
Click to collapse
I think you know this but
You look for these lines
Code:
sku: XT2129-2
ro.carrier: retapac
product: caprip
ro.build.fingerprint:...RRC31.Q1-3-34-1/...
and
Code:
imei: *****
imei2: *****
Means you have Dual sim, there may be firmware that is for a single sim, you do not want to use that.
There a few sources for stock moto firmware.
I prefer LMSA, it is the official Moto flashing program for Windows
The 2 other sources I like are run by the same people
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
and
Moto Updates Tracker
An automated channel that tracks Motorola updates releases. By @vachounet and @yshalsager https://mirrors.lolinet.com/firmware/motorola More automated channels that you may like: @yshalsager_projects
t.me
Looks like you are running an older build and lolinet may have removed it already, you could use a newer version
you will need to flash the full firmware.
Moto Update Tracker has this
Codename: #capri
Carrier(s): Australia
Phone Model(s): XT2127-2-DS/PAMN0016AU
Version: RRBS31.Q1-3-34-1-2
Android: 11
Download: Here
Click to expand...
Click to collapse
CAPRI_RETAIL_RRBS31.Q1-3-34-1-2_subsidy-DEFAULT_regulatory-XT2127-2-APEM-SAR_CFC.xml.zip
again if you have a Windows PC I recommend LMSA
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
I think you know this but
You look for these lines
Code:
sku: XT2129-2
ro.carrier: retapac
product: caprip
ro.build.fingerprint:...RRC31.Q1-3-34-1/...
and
Code:
imei: *****
imei2: *****
Means you have Dual sim, there may be firmware that is for a single sim, you do not want to use that.
There a few sources for stock moto firmware.
I prefer LMSA, it is the official Moto flashing program for Windows
The 2 other sources I like are run by the same people
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
and
Moto Updates Tracker
An automated channel that tracks Motorola updates releases. By @vachounet and @yshalsager https://mirrors.lolinet.com/firmware/motorola More automated channels that you may like: @yshalsager_projects
t.me
Looks like you are running an older build and lolinet may have removed it already, you could use a newer version
you will need to flash the full firmware.
Moto Update Tracker has this
CAPRI_RETAIL_RRBS31.Q1-3-34-1-2_subsidy-DEFAULT_regulatory-XT2127-2-APEM-SAR_CFC.xml.zip
again if you have a Windows PC I recommend LMSA
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Awesome, many thanks for your help and suggestions, i'll definately take them on board. I tried the LMSA tool straight up and it couldn't find any compatable stock roms via either usb debug or fastboot. I also couldn't find anything searching by name. I did trying searching a few sites for stock roms but the phone doesn't show system updates as being available so i didn"t think to search on more recent versions. *blushes* Thanks again for your digging, you've hopefully helped save me a few more grey hairs!
Greetings XDA !
I've recently got my hands on this beautiful Moto XT1789-06, immediately unlocked the bootloader and tried to flash a custom rom through twrp,
No matter what custom rom or twrp version I try, I always end up in 'qualcomm hs-usb qdloader 9008' mode and have to blank flash my phone to get it into a bootable state.
Recoveries tried - twrp (3.3.1.0), (3.7.0)/
Roms tried - RR 8.7.1, mokee pie, aosip 11.
Currently running on stock rooted pie 159.19(retin).
I've pasted my fastboot getvar all dump below.
Can anyone please help me flash a custom rom on my device ?
Thanks and cheers...
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_retail-43c7c77-190608
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EMEA
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 6GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224RHVH2
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: DE33DF44
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 02-07-2018
(bootloader) sku: XT1789-06
(bootloader) carrier_sku: XT1789-06
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3832
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:9/PPX29.159-19/
(bootloader) ro.build.fingerprint[1]: 02844:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.19.nash.retail
(bootloader) ro.build.version.full[1]: .en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-06500-sdm660.0
(bootloader) version-baseband: M8998_50.71.02.95R NED
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gf9e16d5 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Sat Jun 8 12:34:38 CDT 2019
(bootloader) git:abl: MBM-3.0-nash_retail-43c7c77-190608
(bootloader) git:xbl: MBM-3.0-nash_retail-4fc2afc-190608
(bootloader) gitmic: MBM-3.0-nash_retail-4fc2afc-190608
(bootloader) git:rpm: MBM-3.0-nash_retail-404f7ba-190608
(bootloader) git:tz: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:hyp: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:devcfg: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:cmnlib: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:cmnlib64: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:keymaster: MBM-3.0-nash_retail-3537781-190608
(bootloader) git:storsec: MBM-3.0-nash_retail-3537781-190608
(bootloader) gitrov: MBM-3.0-nash_retail-3537781-190608
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.053s