Develop Bugs

diamond dead! grey screen!!!!!!!!!!!!!!

hi (sorry for my english )
i have a diamond diam100 and after use mtty to format, now appear the grey screen. :-(
now only can access to diamond with mtty tool....
how i can access to memory to put the DIAMIMG.NBH with mtty?
please anybody could help me???
thaks in advance
the info with mtty is :
Cmd>info 2
HTCSORANG309ˆ’ÇHTCE
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 8 (0x8) is reversed block
OS NOT FOUND !!!

solfree said:
hi (sorry for my english )
i have a diamond diam100 and after use mtty to format, now appear the grey screen. :-(
now only can access to diamond with mtty tool....
how i can access to memory to put the DIAMIMG.NBH with mtty?
please anybody could help me???
thaks in advance
the info with mtty is :
Cmd>info 2
HTCSORANG309ˆ’ÇHTCE
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 8 (0x8) is reversed block
OS NOT FOUND !!!
Click to expand...
Click to collapse
fi you start it in boot mode?!?!?
works???

yes i can ... but i can't put any spl signed and unsigned
thanks for the interest

Search the threads there are two commands to try using MTTY task 28 55aa and Task 29 (I'm not exactly sure if the format of the first one is correct but it is approximately the command you need, search for Task 28 and you should be able to find it).
Task 29 formats the user portion of the ROM area much like Hard Reset but better.
Task 28 reformats the ROM and extended ROM areas - don't quote me on this though as it's a long time since I've needed it and I could be wrong!

thanks for your reply but doesn't run...
the task 28 55aa doesn't nothing.....not appear any message..
the task 2a format all.... but sill can't put a hard spl...
I try the task 29 too... and nothing....
:-(
any idea?

the result of mtty
Cmd>task 28 55aa
Cmd>task 28
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>task 2a
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=288, total block of CE=1760
Write 0xFF start page=0x4800, total page=0x1B800
restore SPL OK
restore MISC configuratoin OK
restore MFG configuratoin OK
Format ALL end
Cmd>

solfree said:
thanks for your reply but doesn't run...
the task 28 55aa doesn't nothing.....not appear any message..
the task 2a format all.... but sill can't put a hard spl...
I try the task 29 too... and nothing....
:-(
any idea?
Click to expand...
Click to collapse
if you can start in boot mode, you can flash stock rom then........

ervius said:
if you can start in boot mode, you can flash stock rom then........
Click to expand...
Click to collapse
ups...thank you very much.... buuut.... how i can use this tool?

Flashing the stock ROM.
Download the stock ROM from your Cell Providers website or HTC and then put your device into bootloader and run the exe in which the ROM is packaged. It will unpack the rom and run an upgrade tool which will flash your device...

Here are the stock Roms

wtpelzer said:
Download the stock ROM from your Cell Providers website or HTC and then put your device into bootloader and run the exe in which the ROM is packaged. It will unpack the rom and run an upgrade tool which will flash your device...
Click to expand...
Click to collapse
thanks again... but not run... appear the error...262...

band27 said:
Here are the stock Roms
Click to expand...
Click to collapse
thank you very much
i have a lot of roms... but nothig run ok..
i need the rom for the dsm editor?

solfree said:
thank you very much
i have a lot of roms... but nothig run ok..
i need the rom for the dsm editor?
Click to expand...
Click to collapse
Hi,
You should try to find the exact same ROM you had before (the one that came with the TD originaly). You can find that on HTC website (if it accepts your serial number for download, then, the device should also accept it without any trcks or tweeks), or your provider (if it is a branded device)

GAlves said:
Hi,
You should try to find the exact same ROM you had before (the one that came with the TD originaly). You can find that on HTC website (if it accepts your serial number for download, then, the device should also accept it without any trcks or tweeks), or your provider (if it is a branded device)
Click to expand...
Click to collapse
doesn't accept de serial number.... :-( the phone is the orange spain
thanks for reading me

solfree said:
doesn't accept de serial number.... :-( the phone is the orange spain
thanks for reading me
Click to expand...
Click to collapse
Have you flashed hard spl before the phone bricked?
I don't think there is a spanish orange ROM in the forum. You should try to ask to Orange spain (customer service) where you can download the software updates for your diamond.
In alternative, you can try to flash an older oficial ROM (such as the 1.93)...
If it succeeds, then you hard spl your phone and flash whatever ROM you want. NOTICE that this will only work if you have previously flashd hard spl...

i can't never flash spl..... :-(
avery time stop at 0%...................
thanks!

Now you can't flash hard spl because the phone is bricked. You should have done it before you tried the first flash. Have you done it?
If you havnen't, that's what bricked the phone...
I believe that the only way to fix this is to flash the original ROM. You may get it from Orange
Ahora no puedes poner el hard spl. Diamond esta muerto. Lo que passa es que antes de intentar el primero flash deverias ter puesto el hard spl. Lo has hecho? Si no lo has hecho, eso es lo que ha bloqueado el telefono.
Créo que la unica solucion es descargar la ROM original de orange. La puedes tener directamente de orange

ok thank you very much... i find the oficial rom.... but in orange doesn't exist... :-(

GAlves said:
Now you can't flash hard spl because the phone is bricked. You should have done it before you tried the first flash. Have you done it?
If you havnen't, that's what bricked the phone...
I believe that the only way to fix this is to flash the original ROM. You may get it from Orange
Ahora no puedes poner el hard spl. Diamond esta muerto. Lo que passa es que antes de intentar el primero flash deverias ter puesto el hard spl. Lo has hecho? Si no lo has hecho, eso es lo que ha bloqueado el telefono.
Créo que la unica solucion es descargar la ROM original de orange. La puedes tener directamente de orange
Click to expand...
Click to collapse
I find this rom
http://www.orange.co.uk/diamond/RUU...igned_Diamond_52.29.25.12_1.00.25.05_Ship.exe
and run the exe and when it's at 1% reset it self......... :-(
a question:
exist a way to put in the 4gb ram the rom image by mtty????
my GOOD!!!

Any news dude?
Did you found the original Orange/Spanish Rom?

bada SDK for research...

This is a2 of 2.0 SDK...
Link removed...
Request.
Maybe someone can upload or Link to Alpha of bada 1.0 please.
Thanx in advance.
Best Regards

[GUIDA] Creare applicazioni per Bada
METODO 1:Bada App Builder [/B] un tool che rendà accessibile a tutti la creazioni di applicazioni per Bada.Pensate per coloro che non hanno tempo di acquisire conoscenze specifiche nell’ambito della programmazione, Bada App Builder consentirà di creare applicazioni in 3 semplici passaggi, garantendo a tutti la possibilità di dare un contributo sostanziale all’oceano Bada. Attraverso questo strumento la realizzazione di un app non richiederà che 15 minuti, permettendo, a realizzazione compiuta, la pubblicazione del proprio progetto direttamente sull’App Store.Bada App Builder non richiede altro all’utente che la selezione di: layout, contenuti e logo. Dopo questi semplici passaggi verrà consentita la pubblicazione della propria applicazione. Bada App Builder ed è compatibile con tutti i sistemi operativi di casa Microsoft e Linux. Permetterà di creare delle applicazioni dedicate proprio alla nuova relase del sistema operativo di Samsung. L’utilizzo è semplice, essendo un software punta e clicca e di conseguenza con le procedure guidate, si potrà creare il proprio software in meno di 20 minuti.Il gioco è fatto. Ovviamente si potrà anche inviare a Samsung per un controllo. Quindi, nuovi e vecchi developer, fatevi avanti per sbarcare su Samsung.
Tutt’ora Bada App Builder è in release scaricabile dal seguente link [DOWN]http://www.fileserve.com/file/777CNT2[/DOWN]
mentre la giuda è scaricabile da qui [DOWN]http://www.fileserve.com/file/vDkBdxm[/DOWN]
METODO 2:Codemotion Pensato da samsung per sviluppare Samsung Apps in modo semplice e rapido.
[DOWN]http://www.codemotion.it/samsung-bada-lab-invitation-adventure[/DOWN]

adfree said:
http://www.megaupload.com/?d=AIWU90NZ
http://www.megaupload.com/?d=TCG1ZBRE
This is a2 of 2.0 SDK...
Request.
Maybe someone can upload or Link to Alpha of bada 1.0 please.
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
Thank you man, so we can test our apps in some crazy ways.

Please, maybe someone could share old SDK and PlatformDownloader:
bada-SDK_1.0.0b2rc4.exe
bada-SDK_1.0.0b2_rc2_target.zip
PlatformDownloader_B8.exe
PlatformDownloader_B6_B7.exe
Thanx in advance.
http://static.bada.com/releasenotes/1.0.0b2.html
http://static.bada.com/releasenotes/1.0.0b2rc4.html
http://static.bada.com/releasenotes/1.0.0b2rc5.html
Best Regards

Oh... not realized that badaEmulator.exe can start alone...
Tools\Emulator\Bin
Code:
serial1 = yes
serial1.port = COM90
serial2 = yes
serial2.port = COM91
Maybe it is possible to work with WinComm or send Commands...
Best Regards

Lets try again...
I'm playing with SDK 2.0.3... yes I have latest... but...
Emulator first since SDK 2.0.0b1 known...
What we have:
FactoryFs_Emul_Wave.img --- not extractable easily yet...
apps.bin --- use HexEditor to look into...
Wave_Remaker can extract these files...
Thanx.
Code:
CSC_Emul_Wave.rcs.org
Rsrc2_Emul_Wave(Low).rc2
Rsrc_Emul_Wave.rc1.org
No idea if RC2 file accept Debug Level higher then Low... will try later...
Now "mainproblem"... how to inject files?
Best Regards

...Model\WaveWVGA\Emulator\Configuration
emulator.properties
This "text" affect also if you start only badaEmulator.exe
First change I did:
Code:
# supported scale factors are only 0.5, 0.75, and [B]1.0[/B]
window.scale=[B]1.0[/B]
Now full 480 x 800 Pixel...
Next I will play with this, for better position...
Code:
# emulator window position
Now I make new files with Wave Remaker... maybe faster start...
Remove Fonts etc...
Maybe I did something wrong but maybe TTF from CSC not used... so maybe 0 files possible...
CSC_Emul_Wave.rcs.org is 66 MB... now...
Lets see later...
Best Regards

I have removed complete TTF files from CSC...
I've lost German Umlaut, but Fonts are still visible...
So Windows Font or something else is used...
I have changed between English and German... can't see more missing stuff...
My CSC_Emul_Wave.rcs.org is now shrinked to 30 MB...
Code:
qemu_find_file failed! (x:\bada\2.0.3\Model/WaveWVGA/Emulator/[B]LSI.csi[/B])
[mount_image] Cannot find file (LSI.csi)
qemu_find_file failed! (x:\bada\2.0.3\Model/WaveWVGA/Emulator/Configuration/[B]aqua_log.conf[/B])
If I config
Code:
# yes - use IDE, send log message to IDE, add '-use-ide' option
# no - not use IDE, send log message to file(aqua_log.txt)
use.ide=[B]no[/B]
Then I have in Logs...
aqua_log.txt
Code:
0051.134,INFO,P32,T00,A121,OspMain (32) > Application started.
Not really amazing...
RC2 edit to Debug Level High... I can not see any difference...
Best Regards

Oh... it seems my RC2 Mod is working.
Cool, now also few more infos in aqua_log.txt
As it seems exact this from Blue Screen...
Best Regards

U O
FactoryFs_Emul_Wave.img
Here WRITE ... it is NOT ROM Image... read only...
With OLLYDBG.EXE I can find something... "in badaEmulator.exe"...
256 MB Block... but it seems not FAT so I am not smart enough to find solution for extract files from *.img.
But Algo must somewhere included as write access to this FactoryFs_Emul_Wave.img
Best Regards

Really funny...
You can play with SWF files, if you want...
Here I have only short tested ScreenLock.imswf from old XXJL2... bada 1...
Seems not compatible...
I have now 2 more ideas...
Will check if S8600 stuff... and or...
Best Regards
Edit 1.
Screenshot number 3... is taken from S8600

It is quick and dirty created but it is easy to replace some Pics...
No idea if Animated GIFs are possible... this is PNG...
Best Regards

Code:
# yes - enable aqua LOG
# no - disable aqua LOG, add '-no-log' option
Found this in 2.0.0b2... and..
com0com-setup.exe
So maybe I move back...
Best Regards

Connected to the bada IDE!
The "COM0" port did not open.
Click to expand...
Click to collapse
Small progress...
IDE open ... and Broker.exe...
Now second attempt...
With Event Injector you can make some folder/files visibe from FactoryFs_Emul_Wave.img
Best Regards

Second attempt...
No idea why, but Event Injector seems only started if IDE...
So I have closed IDE...
Broker.exe...
The "COM0" port did not open.
Click to expand...
Click to collapse
Found this in 2.0.0b2... and..
com0com-setup.exe
Click to expand...
Click to collapse
Hmmmmm. Maybe this file is the magic...
But I will better move to other PC.. to prevent absolute chaos with my Com Ports...
Best Regards

After I have realized, how to identify *.so files...
http://forum.xda-developers.com/showpost.php?p=25804534&postcount=24
First test was to modify few Bytes in FactoryFs_Emul_Wave.img, to see if Manipulation is fast detected...
I have manipulate MediaExplorer.so content.
Emulator starts normal... I can see all stuff.
Only if I click on my Files... Bluescreen.
Tested on 2.0.0b1
Attached is extracted file...
It is MediaExplorer.so, much shorter as in handset...
Best Regards

Investigate in Broker.exe
Broker.exe -h
Code:
Usage: broker
[-hgvd] [-i APP_ID] [-f APP_FOLDER] [-l APP_FILE] [-p <int>] [-r APPS_ROOT] [-
dbginfo-folder=DEBUG_INFO_FOLDER] [--painfo-folder=SM_INFO_FOLDER] [--gdi-only]
[--gsi-only] [--gmcr-only] [--ddm] [--dsm] [--dtm] [--dup] [--drf] [-s <int>] [
-connect-emul] [--gmon] [--del-res]
-h, --help Displays help on the command line parameters
-i, --app-id=APP_ID Inputs an application ID
-f, --app-folder=APP_FOLDER Inputs an application folder
-l, --app-file=APP_FILE Inputs an application binary file
-p, --port=<int> bada IDE socket port. ex) --port=6200
-g, --debug Debug mode
-r, --apps-root=APPS_ROOT Application root folder in a target.
default: "/Osp/Applications"
-v, --version Displays a version
--dbginfo-folder=DEBUG_INFO_FOLDER the local folder to get debug information
iles
--painfo-folder=SM_INFO_FOLDER the local folder to get performance analyzer i
formation files
--gdi-only Only Get Debug Information
--gsi-only Only Get SubMarine Information
--gmcr-only Only Get Memory Usage Checking Result
--ddm Disable to send/receive bada debug messages
--dsm Disable to send/receive submarine messages
--dtm Disable to relay bada trace messages
--dup Disable to upload
--drf Disable to remove application folder
-s, --pa-port=<int> Performance Analyzer socket port. ex) --pa-port=720
-d, --pa-debug Performance Analyzer Debug mode
--connect-emul Connect to Emulator
--gmon gmonitoring enable
--del-res Remove icons, resources, and data files on the targ
t.
Invalid command line argument!
Maybe I can use Broker to open Ports...
Best Regards

I have managed to install my own Apps...
Tested with 2.0.5 and Broker.exe from 2.0.0b1...
Still need IDE... and only with Win 7...
As XP block access to full folder...
Best Regards

static.bada.com/sdk-update/1.0.0b2rc4/Wave/Wave_1.0.0b2rc4.zip
static.bada.com/sdk-update/1.0.0b2rc5/Wave/Wave_1.0.0b2rc5.zip
Missing such files...
Code:
PlatformDownloader.exe
bada-SDK_1.0.0b1-RC1.zip
PlatformDownloader_B8.exe
PlatformDownloader_B6_B7.exe
bada-SDK_1.0.0b2_rc2_target.zip
bada_SDK_1.0.0b3_partner_packaged.zip
bada_SDK_1.0.0b3.exe
PlatformDownloader.exe
1.0.0b2_rc7
Maybe someone is able to find more valid Links... before bada complete dead...
Best Regards

http://dpimg.ospos.net/contents/dd/seoul/CertificationProcess.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b2-rc4/badaTutorial.Security.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b1/badaTutorial.Overview.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2/badaTutorial.Application.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2/badaTutorial.Communication.pdf
http://dpimg.ospos.net/contents/tutorials/bada_SDK_1.0.0/badaTutorial.UIExtension.pdf
http://dpimg.ospos.net/contents/tutorials/bada-V1.0.0b2-rc4/badaTutorial.DevelopmentEnvironment.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6.3/badaTutorial.sdkTarget.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6/badaTutorial.Media.pdf
http://dpimg.ospos.net/contents/tutorials/bada_1.0.0b2_RC6/badaTutorial.sdkTarget.pdf
http://dpimg.ospos.net/contents/doc...ramework/classOsp_1_1Locales_1_1Currency.html
http://dpimg.ospos.net/contents/apis/bada/bada-V1.0.0a2/framework/classOsp_1_1Media_1_1Image.html
http://dpimg.ospos.net/contents/docs/apis/bada-V1.0.0b1/classOsp_1_1System_1_1SystemInfo.html
http://dpimg.ospos.net/contents/docs/apis/bada-V1.0.0b1/classOsp_1_1Ui_1_1Controls_1_1Keypad.html
http://dpimg.ospos.net/contents/en_US/developer/apis/images/contest/dd/B4-Game_in_bada.pdf
http://dpimg.ospos.net/contents/doc...sp.apireference.help/group__CplusplusSTL.html
View Links...
Best Regards

beIN SPORTS Erreur 288 (0)

hi
i installed Bein Sports on my phone I9192 who has the samsung galaxy s6 & n5 rom for mini (i9192 only)
https://play.google.com/store/apps/details?id=ptv.bein.mena&hl=fr
but when i launch the application and want to watch HD channels ( beni HD1, bein Hd2...) an error 288 (0) appear : " votre appareil est jailbreaké, vous ne pourrez pas utiliser toutes les foncionalités de l'application. " (your device is jailbroken, you can not use all of the application foncionalités)
i think this message appear because my phone is rooted any solution to fix this issue and to use this application with rooted device
thanks a lot for your help :highfive:

any help please

how to fix your device is jailbroken, you can not use all of the application foncionalités on rooted device thanks

Flash pass but no frp removal

This is a Samsung J2 Pro SM-J250M. Family memner cant remember Google credentials attached to phone. New to this, but managed succesful Odin3 flashes with correct AP+BL+CP+ pit files, and with a single HOME file, but although it comes up PASS, it doesn't remove frp. Am I missing something?

I have found the solution here:
[ CONSULTA ] Desbloqueo OEM no aparece en Sm-J250M
[ CONSULTA ] Desbloqueo OEM no aparece en Sm-J250M Samsung Galaxy J2
www.htcmania.com
You just need to translate the page into English

Persist file for redmi note pro 8

Buna ziua, am nevoie si de un fisier persist.img pentru redmi note pro 8 begonia daca ma puteti ajuta cine va char si o copie de rezerva pentru acel fisier nu ar strica multumesc anticipat stefan
----------
MOD EDIT: English Translation Below
Hello, I also need a persist.img file for redmi note pro 8 begonia if you can help me who will char and a backup for that file would not hurt thanks in advance stefan

i found one in gsmkolik.com
persist
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
use dd to flash it. Fastboot will give write protection error.
"dd if=/sdcard/persist.img of=/dev/block/sdc10"

Canny1913 said:
i found one in gsmkolik.com
persist
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
use dd to flash it. Fastboot will give write protection error.
"dd if=/sdcard/persist.img of=/dev/block/sdc10"
Click to expand...
Click to collapse
comanda mea nu funcționează acolo unde trebuie să pun exact fișierul pe care l-am pus în memoria internă a telefonului și îmi spun că nu există.
----------
MOD EDIT: English Translation Below
my command doesn't work where I need to put exactly the file I put in the phone's internal memory and it tells me it doesn't exist.

stefandasoveanu said:
comanda mea nu funcționează acolo unde trebuie să pun exact fișierul pe care l-am pus în memoria internă a telefonului și îmi spun că nu există.
----------
MOD EDIT: English Translation Below
my command doesn't work where I need to put exactly the file I put in the phone's internal memory and it tells me it doesn't exist.
Click to expand...
Click to collapse
Put it in internal storage, where the Download or Android folder resides.