So I have a SIM locked S8+, I flashed it to the unlock firmware to debloat, and to see if it will SIM unlock the device (it did not!). Now I have T-Mobile unlocked the device and received the typical email of "the device is unlocked, no unlock code, need to run Device Unlock App to unlock" email.
The issue is, with the unlocked version firmware, I cannot run the Device Unlock app, it simply says the app is not compatible with the device, which is right because you cannot unlock an already unlocked device, seeing that a device is running an unlocked version of the firmware.
Two questions:
1. Do I have to revert back to T-Mobile stock firmware in order to run the Device Unlock app?
2. If so, how to revert back? I have see this can be done for the S8, but have not seen instruction (files) for the S8+.
Thanks!
No one?
jrsmooth said:
No one?
Click to expand...
Click to collapse
I have the same question too since I was contemplating on whether I should update my T-Mobile S8+ to the unlocked firmware but then I wondered if I could go back to stock T-Mobile firmware. Seems like no one has an answer for this yet : /
You can revert back 100%
kimple_john said:
I have the same question too since I was contemplating on whether I should update my T-Mobile S8+ to the unlocked firmware but then I wondered if I could go back to stock T-Mobile firmware. Seems like no one has an answer for this yet : /
Click to expand...
Click to collapse
If you flash T-Mobile Unlocked Firmware 955U1 yes you can revert back by just flashing T-Mobile Stock Firmware 955U. It was difficult to revert back before 955U1 was released where we flashed Canadian Unlocked XAC, but we finally got a solution as in the link below.
https://forum.xda-developers.com/showpost.php?p=72525783&postcount=5
Again, if you flash T-Mobile Unlocked 955U1, you just flash T-Mobile Stock 955U to revert back to stock. Note: You'll need to switch between unmodded Odin3 v3.12.7 and modded Odin PrinceComsy for Stock and Unlocked Firmwares. Another option which you don't need is reverting back using Smart Switch Emergency Software Recovery Initialization.
Warning!!! When reverting back there's 95% chances of getting a Phone Storage corrupt and the only option is resetting. Meaning you'll lose your data, so backing up your stuff is highly advised.
That option works great ?, just BACK UP and moved files to your SD CARD. I have done it more than 5 times, works great. I haven't UNLOCK MY S8+ yet, I'm getting another one so I'll UNLOCK it. YOU CAN CHECK OUT IMEIFIX.COM OR IMEIGURUS.COM . I have UNLOCK more than 4 S7 Edge, 2 Note4's and these guys work very fast. 100% recommended ?.
What is the best method to do this process? This is a Verizon phone and when I changed sims the phone rebooted and the boot logo changed but the Wifi calling is not working (the toggle is there but it doesn't work and I have my address set). I want to download the T-Mobile firmware to install on this device. I have experience in using odin but want to make sure I do it right. I also read somewhere about flashing the unlocked version's firmware first? Where do I download the latest versions, and can I do it without a factory reset?
infinatious said:
What is the best method to do this process? This is a Verizon phone and when I changed sims the phone rebooted and the boot logo changed but the Wifi calling is not working (the toggle is there but it doesn't work and I have my address set). I want to download the T-Mobile firmware to install on this device. I have experience in using odin but want to make sure I do it right. I also read somewhere about flashing the unlocked version's firmware first? Where do I download the latest versions, and can I do it without a factory reset?
Click to expand...
Click to collapse
Just flash the t-mobile firmware and use the HOME CSC file and not the other CSC file. You don't need to flash unlocked firmware if you do that you're not going to have any wifi calling features or anything else that t-mobile puts in their firmware. The latest versions can be found all over just Google it and if you don't know what the latest firmware is check on t-mobile they'll have a list like Verizon does.
Getting a new-in-box Note10+ today from Swappa, so I assume it will be on some Android 9.0 TMO firmware. I need to get it onto the Verizon firmware.
SamFirm only gives the latest Android 10 firmwares. (It may be important to note that the VZW and XAA files both have the exact same filename: SM-N975U1_10_20200118102941_hj8esiossq_fac)
Is it safe to open the box > go straight into download mode > flash the newest VZW firmware via Odin?
Or are there other things I should do first? For example (in no particular order):
- the bootloader version of the phone out of the box, and the bootloader versions of the firmwares
- needing a first boot
- needing to update the software via settings before doing any flashing
- per this thread it may be necessary to first flash the XAA firmware while the verizon sim is in then do a first boot, THEN flash VZW firmware
- anything else I'm not aware of
Thank you. Also any other suggestions are welcomed. I don't want to turn this into an $800 brick and I've spent about 4 hours reading online to make sure I'm up to speed, so any feedback that's current as of today and specifically pertaining to my situation would be helpful.
You need to flash the unlocked software 1st before you flash the Verizon software. The Flash will fail if you don't. Also, the phone needs to be unlocked. Test it with the Sim card 1st.
Disclaimer: I am not responsible for any bricks/ issues you may encounter following this guide. Although, I will do my best to try to help you if something were to go wrong.
MAKE SURE OEM UNLOCK IS ENABLED UNDER DEV SETTINGS BEFORE YOU DO ANYTHING BELOW
Update 2: 3/11/2021 : I see maybe deleting the .ta files may help avoid soft bricking, feel free to try it I have not personally tested yet to see if it works.
Update#3 3/13/2021 : If you are following this guide recently make sure you update to Android 11 first! Do not do any updates after the first one to Android 11! Then the flashing should work just fine. Tested and verified this on Taiwan XQ-AT52 to 51 firmware
Hello, I've managed to successfully flash AT51 firmware on my AT52 without issue using Newflasher.
Step 1 download = the US firmware/ whatever region is needed for you and new flasher/ the sony xperia drivers needed to flash the firmware to your device. Extract it to your desktop. Install the Xperia driver from newflasher if you need to/ haven't yet. Newflasher needs to be extracted into the same folder where the firmware files are that you downloaded from Xperifirm. This step is crucial!
Step 2 : Power off your Xperia and put it in flash mode by pressing down on the volume and connecting it to your PC via usb. (Do not use the USB C cable that came with the phone use a different one if you have one) You'll know it is in flashmode if the notification LED turned green and the screen remains off.
Step 3 : Open newflasher.exe
Step 4: type n then press enter
Step 5: type n again and press enter
Step 6 : This is when you should get to the flashing stage. Press Y and enter to everything you are prompted to. type y for yes to. This for me resulted in a successful conversion over to AT51.
Step 7: Once everything is done and it says you are safe to disconnect your phone please do so and then press and hold your power button until the phone boots up.
At this point you should have a fully working AT51 firmware!
Bare with me as I"m working on getting developer access for androidfilehost and will upload the files asap. In the meantime you can download newflasher and the firmware files yourself using Xperifirm if you don't wanna wait for me to upload.
Xperifirm: https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Newflasher: https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
Can you please help? I followed and i got a corrupted message and power off in 5 second.
I tried xperia companion, failed.
I tried to reflash newflasher with original firmware again, failed.
Please help.
tiunilohmu said:
Can you please help? I followed and i got a corrupted message and power off in 5 second.
I tried xperia companion, failed.
I tried to reflash newflasher with original firmware again, failed.
Please help.
Click to expand...
Click to collapse
Can you tell me the model of your xperia phone? If you can still get it into flash mode when the notification LED turns green you may still be able to recover it.
Hi, I finally managed to restore it. I have to remove all the ta files to flash it, then it booted up.
Thanks for your respond.
my device is corrupted please help
blegs said:
my device is corrupted please help
Click to expand...
Click to collapse
what did you do to corrupt it?
Lennyuk said:
what did you do to corrupt it?
Click to expand...
Click to collapse
I have using newflasher
After using 3 time xperia companion it work normal again
Hi, I didn't find this thread until after I made an attempt at flashing the device. I followed the instructions from the link below and ended up with the device saying it's corrupted.
https://www.xperiablog.net/2018/01/...-firmware-for-xperia-xz-premium-xz1-and-more/
I tried redownloading newflasher as well as redownloading the firmware I wanted as well as a new cable and that did not help. I reflashed it with this procedure listed above and it did not help.
Xperia companion won't let me do anything because it says the device is locked even though the device was not locked and there doesn't appear to be a way to unlock it. edited to add that I did get xperia companion to repair it successfully
edit again to advise I succeeded only after doing n and enter a third time then hitting y and enter for the final flashing step and that was successful in getting it updated correctly
Would it work to unlock my phone
Thanks for the guide!
Can I ask few questions please?
First is do I need to have my bootloader unlocked? I enabled OEM unlock setting in developer settings but that is only one thing I did.
And the second one is could this flash unlock my phone?
I am in this situation where my AT51 won't work with other sims except for Vodafone. UK.
I stayed with them for 30 days, (required time frame to get your phone unlocked) requested unlock code and it has been more than 10 working days but still have not received the code.
So today I did some searching online and found the service code to check if my phone is locked to a network and to my surprise it says it's not. So I am guessing that they have limited my phone to using only their sim through some other means andnot buy locking my modem. But this is ofc just a guess.
I kept chatting with the customer support and he keeps saying wait for the code which I do not believe is going to come, they have to unlock it on their end. But I am not sure about that. I don't think they are sure either..
Basically I'll wait fem more days maybe they will unlock it but if they won't when I am thinking maybe my modem is not locked and I could unlock it by flashing different ROM?
Or do you think this won't work?
Sorry for a rambling post. Looking forward to your reply. Thanks!
Mazvydelis said:
Thanks for the guide!
Can I ask few questions please?
First is do I need to have my bootloader unlocked? I enabled OEM unlock setting in developer settings but that is only one thing I did.
And the second one is could this flash unlock my phone?
I am in this situation where my AT51 won't work with other sims except for Vodafone. UK.
I stayed with them for 30 days, (required time frame to get your phone unlocked) requested unlock code and it has been more than 10 working days but still have not received the code.
So today I did some searching online and found the service code to check if my phone is locked to a network and to my surprise it says it's not. So I am guessing that they have limited my phone to using only their sim through some other means andnot buy locking my modem. But this is ofc just a guess.
I kept chatting with the customer support and he keeps saying wait for the code which I do not believe is going to come, they have to unlock it on their end. But I am not sure about that. I don't think they are sure either..
Basically I'll wait fem more days maybe they will unlock it but if they won't when I am thinking maybe my modem is not locked and I could unlock it by flashing different ROM?
Or do you think this won't work?
Sorry for a rambling post. Looking forward to your reply. Thanks!
Click to expand...
Click to collapse
You do not need the bootloader unlocked as you are flashing official firmware.
Anyone know if you can flash a XQ-AT52 to a XQ-AT51 and then back to the XQ-AT52 firmware?
Sent from my XQ-AT52 using Tapatalk
I know this thread is a few months old at this point but I'm really struggling to flash to XQ-AT51. I've successfully flashed from XQ-AT52 Hong Kong (my original firmware) to the Taiwan version which is slightly better because of the messaging compatibility but I really want to get the US version. I have tried at least 20 times over the course of a full day and I have not been able to flash the US firmware without getting an error saying "Your device is corrupt It can't be trusted and will not boot" every time. I have repaired it back to the Hong Kong firmware (back when that was the one I had) and to the Taiwan version once I had that installed. But I have never gotten the US firmware to take without the "Device is corrupt" error.
My phone is the Sony xperia 1 mark 2 running the then default XQ-AT52 Hong Kong, and now running the default XQ-AT52 Taiwan. I've been trying to flash to XQ-AT51 US. I've been using newflasher v39 and the US firmware downloaded for xperifirm v 5.5.0.
So I was able to flash from the hong kong version to the Taiwan version and back with no issues at all. But I'm still unable to flash to the US version without the "Your device is corrupt It can't be trusted and will not boot" error that seems to happen every single time I try to install the US firmware.
Can someone make me a favor and can upload the latest ftf of Android 10 for the Xperia 1ii Single SIM?
ProjectBlitz said:
So I was able to flash from the hong kong version to the Taiwan version and back with no issues at all. But I'm still unable to flash to the US version without the "Your device is corrupt It can't be trusted and will not boot" error that seems to happen every single time I try to install the US firmware.
Click to expand...
Click to collapse
The 1 II has downgrade protection, so as long as the firmware version of the US version isn't the same or newer than the highest version you've ever used you're gonna get the corruption error.
What you could try is flashing the newer EU version and then flashing only the older US customisation image. That's what I did for a while since US firmware was older than EU firmware, and it worked. Not sure if it'll work with Android 11.
ProjectBlitz said:
I know this thread is a few months old at this point but I'm really struggling to flash to XQ-AT51. I've successfully flashed from XQ-AT52 Hong Kong (my original firmware) to the Taiwan version which is slightly better because of the messaging compatibility but I really want to get the US version. I have tried at least 20 times over the course of a full day and I have not been able to flash the US firmware without getting an error saying "Your device is corrupt It can't be trusted and will not boot" every time. I have repaired it back to the Hong Kong firmware (back when that was the one I had) and to the Taiwan version once I had that installed. But I have never gotten the US firmware to take without the "Device is corrupt" error.
My phone is the Sony xperia 1 mark 2 running the then default XQ-AT52 Hong Kong, and now running the default XQ-AT52 Taiwan. I've been trying to flash to XQ-AT51 US. I've been using newflasher v39 and the US firmware downloaded for xperifirm v 5.5.0.
Click to expand...
Click to collapse
im in the us and was looking to the 256gb version (i think its taiwan). is the hong kong or taiwan version missing anything? or is the only reason to flash to US to get better coverage with us carriers?
GreeleyXda said:
im in the us and was looking to the 256gb version (i think its taiwan). is the hong kong or taiwan version missing anything? or is the only reason to flash to US to get better coverage with us carriers?
Click to expand...
Click to collapse
It's for better coverage and for VoLTE and Wi-Fi calling support. Also if you get a HK one with Android 11 you will be unable to flash the US firmware, because it is still on Android 10; and the phone has anti-rollback protection.
it arrived on 10 still, but its bugging me to update.
THISISINSANE said:
It's for better coverage and for VoLTE and Wi-Fi calling support. Also if you get a HK one with Android 11 you will be unable to flash the US firmware, because it is still on Android 10; and the phone has anti-rollback protection.
Click to expand...
Click to collapse
This isn't the case now since the US models have Android 11 too now
Can anyone confirm that this process has to be done using USB 2.x? I've read in a separate post that newflasher isn't compatible with USB 3.x, which is currently what all my computer use. Also, should I be using the newest version newflasher?
EDIT: Tried on USB 2.0 and it worked perfectly.
Ok so I got the Motorola one 5g ace qualcomm T-Mobile single nano sim variant! I was flashing from lineage back to stock firmware... The firmware I grabbed for it (should have looked at the hole name) was wrong not enough to kill the phone but enough to add duel sim to it and not give me the treble support files. My problem is this is I have flashed and reflashed the right firmware and it keeps coming back to the same thing 2 sim cards making it so I can't connect or half the time detect my sim card..... So what should I do. Oh and it's also only flashing one partition not doing a/b I'm having to manually do B partition myself.
Are you sure you are on the right device page? Here is for Nairo, Moto G 5g Plus (Moto One 5G) not for the 5G ace.
If you bricked your phone there's the motofirmware website with all the stock roms, find your phone model name, download the firmware and drivers and use the flashall.bat in the folder to reset your phone. You need to be unlocked obviously