Hello There !
Again I'm back With More Symphony Stuff .......
First Things First ........ DO IT AT YOUR OWN RISK ! I AM NOT RESPONSIBLE FOR ANY DAMAGES !
For Experts : (Who has Used SP_FLASH_TOOL before)
If You have already used SP_Flash_Tool . then You guys already know how to work around it !
So i'll Give you Guys Just The Firmwere Files ... Just Flash them using SP_Flash_tool ... and be sure to Untick the Preloader !
Here is The Link - http://www.mediafire.com/?yd8aqt3xlna5ren
Now this ROM is in Indonesian Language ... See below for More Info on How to change the Language ! :fingers-crossed:
*Note* If You wanna To Flash all those Custom Roms again , The Again Flash the MMX-New-Version Files Again !
Now For the NewBies/Starters ! (Who haven't use SP_FLASH_TOOL Before)
Here We Go Again ......
1st Step -
*The driver for Symphony W50 -
The Driver installation !
a) Now download the drivers from this link https://sites.google.com/site/ultimatebrainguide/micromax-a75/installing-drivers ( If you have 32bit download the 32bit ver. and if u have the x64bit download the x64-bit ver )
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
2nd Step : Flashing n Stuff .....
1.Download this first ! http://www.mediafire.com/?2bd9c888k21ll3g
2.Then Download this http://www.mediafire.com/?yd8aqt3xlna5ren
3.Extract both of the files
4.Go to the SP_Flash_Tool folder and and Open Flash_Tool as Administrator .....
5.Click on the Scatter-Loading And select the file MT6573_Android_scatter from the Folder you downloaded As 233 Internal Memory by Sakib
6.Now untick Pre-loader
7.Now Make sure your phone is turned off and also the cable is disconnected ! ......
8.Now press Download on the SP_FLASH_TOOL and as soon as the Timer starts Connect your phone ........
9. Now this will take a While ! And Your phone will boot up with the New Rom ... It Kind of Looks like the Stock Rom .....
Now > Changing The Language !
Well ..... Do as i did Below in The Pictures and Your Phone will be in English in No Time !
Press The Option key in Your Home . And Go to Setting ,
Then Go to the Next Tab and Select the Third One [With a (A) icon]
Press the First Option >
And Select < English !!
And Here is Just A Prove of My phone Running This Rom On English !
And That's It ...........
Find Me On Facebook - https://www.facebook.com/sakib.the.gamer
My Facebook Page ! - https://www.facebook.com/Gam3rs
Symphony W50 Stock Rom
Where can i get Symphony W50 Stock Rom?
Shuvopaul said:
Where can i get Symphony W50 Stock Rom?
Click to expand...
Click to collapse
Why Do you want the Stock Rom ?
Anyway Here is it .. https://www.dropbox.com/s/rkvnoymf89wqwp0/Symphony W50 original ROM backup.zip
Restore it with CWM .......... :good:
this is just great, i could update my Symphony W50 to a fantastic rom, looks really nice than previously held stock one. thanks a lot.
do you have anyway any suggestion how can i change rom of my Smart S-12 phone or where can i get? its not a popular mobile-phone though, but a copy of HTC Incredible S, but hardware will varry.
download link not work
BRO the link is not work. Please give another link.
ABSiddique said:
BRO the link is not work. Please give another link.
Click to expand...
Click to collapse
Links works, I successfully downloaded the files and could upgrade my Symphony W50 phone.
confused
i installed this rom it really works fine with symphony w50 bt i lost cwm recovery....how to install it please help. thank u
This is new Thread of Zopo ZP980 Plus Octa Core
MANY THANKS TO OUR MODERATOR TO GIVE US TO DISCUSS ON THIS PHONE !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Details Section
BRAND and MODEL
Brand: ZOPO
Model: ZP980+
Carrier: Unlocked
Certificate：CE, RoHS
Sim card: Dual sim dual standby
OS and CPU
Operating System: Google Android 4.2 Jelly Bean OS,
CPU: MTK MT6592 1.7GHz, Cortex-A7 Octa core process
GPU:Mali-450 MP4
NETWORKING
Dual sim dual standby, WCDMAGSM+GSM Sim1 Mini Card,Sim2 Normal Size View picture
2G: GSM 850/900/1800/1900 MHz
3G: WCDMA 850/2100 MHz
Network speeds: HSDPA 42.2Mbps，HSUPA 11.5Mbps
Data Technology: GPRS、EDGE、HSPA、HSPA+
Check here your sim provider http://maps.mobileworldlive.com
CAMERA and VIDEO
Rear camera: 14MP, AF, LED Flash
Front-facing cam: 5.0MP
Video capture: 1080P(1920*1080, 30FPS)
Video Play：MPEG-4 [email protected]，Or @15fps,16Mbps
ENTERNAINMENT
Video play formats: MP4/3GP/MOV/MPEG/MKV/FLV, ...
Audio play formats: MP3/AMR/AAC/ASF/Ape/Flac ,...
Ring Tone: MP3/AAC/ASF,...
Picture formats: JPEG/PNG/GIF/BMP,...
CONNECITIVITY and COMMUNICATION
USB support: Micro USB v2.0
WiFi:Wi-Fi IEEE 802.11 b/g/n
WiFi Hotspot functionality, Tethering & portable hotspot - Synchronization via Exchange ActiveSync
Bluetooth technology: Bluetooth v4.0
VPN
GPS satellites: GPS,A-GPS -Sensor: Gravity Sensor, Compass, proximity sensor
DISPLAY
Screen Size: 5-inch
Contrast: 1000:1
Color Support: 16 Million Colors
Screen Technology: LTPS，2.47mm Narrow Frame
Screen material: TFT
Display resolution: FHD Super Retina Display 1920*1080 pixels, 441PPI, OGS
PRE-LOADED APPLICATIONS
Google Maps
Google Talk
Google Mail
Google Calendar
Google Play Store
Facebook
Twitter
Skype
Deleted all Chinese APP English Version
MEMORY
Internal phone storage: 16B ROM
RAM: 1GB
Memory card support : MicroSD Card up to 64gb
BATTERY
Battery:Li-Polymer, 2000mAh
Standby time: 130-200 hours
SIZE
Dimensions: 143.3 x 70 x 8.5mm
Weight: Phone:150g(with 1 Battery)
Software Section
Drivers for windows :
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html
http://www.4shared.com/zip/dSb69w17/Copy_of_Driver.html
http://www.4shared.com/rar/qM8hDW5u/zopo_usb_drivers.html
http://ge.tt/2yL21VT/v/2
New firmware new version of Jellybean for zp980+ for flashtool
with new compatibility with octa core for Facebook and others new apps on the market:
ZP980+_20140618-154923
http://www.4shared.com/rar/jxW50tr0ce/ZP980_20140618-154923.html
New Firmware Kitkat O.S. ZP980+ 20141018-172927 :
http://www.4shared.com/rar/9FBMcxnKba/ZP980_20141018-172927.html
New Firmware 06-01-2014 (zp980+ 20140106-):
http://www.4shared.com/rar/o7F5TeGkba/ZP980_zopomobileshop_140106.html
boot patched
http://www.4shared.com/file/YoFgDaugce/boot_img_ZP980patched_140125-1.html
Recovery Modded :cwm 5504 small font
http://www.4shared.com/file/vZdJiolHce/ZP980_cwm5504.html
twrp 2500 touch
http://www.4shared.com/file/w2w1F9-wce/recoverytwrp2500.html
cwm 6030 (Perfect and raccomanded)
http://www.4shared.com/file/Wl5Zur7tba/recovery_6030_zp980.html
Root
http://www.4shared.com/file/DA8MSemkba/VRoot_1603690_Setup.html
supersu vers 1.91
http://www.4shared.com/zip/Soks3l28ba/UPDATE-SuperSU-v191.html
Mtkdroidtools:242
http://www.4shared.com/rar/SIZQYYL3/MtkDroidTools_v242.html
253
http://www.4shared.com/file/CYuy3V38ba/MtkDroidTools_v253.html
Flashtools v 3.1316.0.212 (raccomanded version for octa core from Zopo staff):
http://www.4shared.com/zip/Ag4aK-rOce/SP_Flash_Tool_exe_v313440212.html
Flashtools v 5.xxxxxxx ( first new version):
http://www.4shared.com/zip/nZZOwTyuce/SP_Flash_Tool.html
Primary Partition 4 -> 7 gb
Raccomanded 7gb
http://forum.xda-developers.com/showthread.php?p=49808465
Ask to me if the link don't run!
Video Section
Utility Section
Cover Change:
To recognize the flip cover opening and closing I would recommend smart cover lite ...this app:
It has so many settings ..... I set the time of closing of the flip cover to 6 seconds after it closed but your own if you want to decide others details!
(vover to recognize the need to insert a small felt pad on the top right of the cover (to use the sensor).
Software Installation Section:
Software Installation Section:
Drivers Installation:
Procedure:
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way (the COM port may be different)
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the casino and installed it different,
to solve, you can try to use the program
USBDeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC.
Firmware setup:
PROCEDURE
1) Installation of new Firmware of the 06-01-2014
To download the new firmware.
Do unzip the compressed file and insert into the firmware folder:
a) recovery amended
b) Ebr1 and 2 to increase the primary partition to 10gb
suggested 7gb
http://forum.xda-developers.com/showthread.php?t=2455850
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This is whole simplified procedure for installing the original firmware
Section Root
1°) PROCEDURE with (SuperSu)
( Prerequisite )
Install the new firmware in advance of 01/06/2014 if you have not already ' patched or fleshate boot with the boot patched .
( prerequisite to understand if you have a clean system 'that has to go out the base language and that ' English )
If you do not have English as the base language head to recovery ( recommended cwm 6030 )
before you do a full firmware flesh total wipe and wipe cache davil )
Having had access to the Android system :
1 ) enable the menu ' settings:
a) menu ' security enable unknown sources ;
b ) menu ' enable developer ,
USB debugging ;
mock locations .
Connect the USB cable and copied to the external memory (Micro SD)
in root ( no folders ) of the same file updatesupersu versXX.zip .
Restart mode ' recovery using:
1 ) the program mtkdroid tools on the front page ,
2 ) the unique method still works but more ' long . :
Turn off the phone and connect the USB cable to recharge the battery,
wait until the little red light charging lights (important)
now you can with the simultaneous pressure of the fingers on the keys:
Power + volume + lever
and wait without removing pressing keys ... that the phone reboots mode ' recovery.
At this point select install zip file and select super user and run it .
Restarting will have root on the phone!
( If you restart there is no ' app Super Upon repeat paying attention to the language of the firmware and that ' an important signal that it makes you realize that the system is ' clean and that there were traces of other changes in your phone)
2°) PROCEDURE with (Vroot)
Among the many tests I've done the following program gave the best results.
Install the new firmware in advance of 06/01/2014 if you have not already 'patched or flesh boot with the boot patched.
1) Install the program on your pc VRoot:
2) Wait for it to update to version more 'recently and do root!
3) Connect your phone with the USB cable to the PC ... and wait for the answers on the monitor of the zp980 +
4) Make the root ... the phone will reboot '.
5) Back in android .... check if everything is' in place
6) Check that there is a shield appeared blue with a mechanical wheel in the middle!
The program has all in Chinese but it works perfectly!
(for the moment Vroot and 'the only one that allows you to have a superuser root and a fully functional)!
does this mean you're waiting for the phone to arrive?
I don't understand why they don't add a few more HSPA bands to these phones...
I mean, every phone I see is either 850/2100 or 900/2100, or AT BEST AND VERY SELDOM 850/900/2100.
Having a quad-core ZP980 2/32GB (it has 850/2100 HSPA), I regret the lack of 900 MHz 3G and won't consider this octa-core one for this reason.
Hey guys - what ROM do you use for the phone?
I currently operate with MIUI v5 4.3.1 (ported from 998) and despite a few bugs works fine - not so happy about battery life still but a brand new device so it will need to settle a bit I guess.
zp980+ 2gb/16rom
wbgenetic said:
Hey guys - what ROM do you use for the phone?
I currently operate with MIUI v5 4.3.1 (ported from 998) and despite a few bugs works fine - not so happy about battery life still but a brand new device so it will need to settle a bit I guess.
zp980+ 2gb/16rom
Click to expand...
Click to collapse
I would love to get a Miui port for my ZP980+ octa core device.
i tried a port from needrom but whatsapp wasn't working.
but i did see a working version of MIUI on the ZP998 device!
Who can port that to the ZP980+ ? please?
Regards,
An desperate ex-MIUI user Addict
Recovery TWRP 2.7.0.0 for ZOPO ZP980+ by SevenMaxs
I put TWRP 2.7 for this phone site needrom.com/mobile/recovery-twrp-2-7-0-0-for-zopo-zp980/
New firmware new version of Jellybean for zp980+ for flashtool
with new compatibility with octa core for Facebook and others new apps on the market:
ZP980+_20140618-154923
http://www.4shared.com/rar/jxW50tr0ce/ZP980_20140618-154923.html
rom miui
hola, gracias por vuestro trabajo, no hay ninguna rom miui, 100% funcional, salen todos los dias para todos los zopo pero para este modelo octacore, 2 gb de ram no, alguna idea?
saludos.
NEW OPERATIVE SYSTEM "KITKAT" IS ARRIVEd ALSO FOR ZP980+
The new Operative System KITKAT is relased for zp980+ !!!!!
FINALLY KITKAT ON ZP 980+ IS ARRIVED
ZP980+_20141018-172927.rar
LINK:
http://www.4shared.com/rar/9FBMcxnKba/ZP980_20141018-172927.html
Hello,
the new KitKat for ZP980+ works fine... but... theres no root
anone here who find a way to root that rom?
i tryed vroot, framaroot ant towelroot... nothing works
thnx
HMME said:
Hello,
the new KitKat for ZP980+ works fine... but... theres no root
anone here who find a way to root that rom?
i tryed vroot, framaroot ant towelroot... nothing works
thnx
Click to expand...
Click to collapse
try this one, is rooted and works fine.
http://www.zopomobile.es/soporte/forum/viewtopic.php?f=30&t=517
Thnx,
but i found my own way to root the original rom.
my english is to bad to write it down :cyclops:.
Micha
In the official forum... Zopoxxxxxxxxp. Com there are my last Rom version n2 based kitkat O. S. With root and many of my tricks!
Sent from my GT-I9505 using XDA Free mobile app
Huawei g7 plus Rio l02 Rom 6.0.1
RIO - L02C636B310
Bluid - CUSTC636D001
*** I backup from twrp
I do not know whether this was done or predators. Who knows your help
Unzip and use twrp reinstate.
Sorry for my English. Now I'm back and rom huawei rio l02 android 6.0.1
: P Upload them not Wait posts to 10 posts. To share files
: EEK: I'll post something :สับสน::สับสน::สับสน:
I Chaer file in Google drive ([email protected])
# extract zip and then use twrp restore.
Root ok
i need i need thank you so much
Hi, I want to use TWRP for my A88T Pro (Android 5.1.1)
CPU: Allwinner A64
Chipset: rtl8703b
Stock Firmware:
www dropbox com/s/mtch4ntri0ejmfs/a64_rtl8703bs_adnroid5.1_v1.21_20170106-2-HQKX.img?dl=0
Extracted boot.img and recovery.img:
www dropbox com/sh/0dkp3ysll4xm0zy/AABO6JD57qEalzEeGbjfuGm8a?dl=0
Wlling to test it on my device if someone wants to help me building it for my device.
I hope anyone can help me with this =)
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Hilal GR BRO said:
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Click to expand...
Click to collapse
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Jowarnerrin said:
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Click to expand...
Click to collapse
Did you try two links