Hello
I would like to buy a PX6, if you could recommend one ...
Features
Processor 8
IPS
DSP
And that it is easy to enter recovery, and have support for updates and custom roms. Greetings and thanks in advance
Remove
Castrillón said:
Hello
I would like to buy a PX6, if you could recommend one ...
Features
Processor 8
IPS
DSP
And that it is easy to enter recovery, and have support for updates and custom roms. Greetings and thanks in advance
Click to expand...
Click to collapse
Any Dasaita.
Related
I just checked and I actually don't have the new LCD screen, maybe another indicator as to why my device came preloaded with the oldest firmware
So based on stormtroopers reply, do I need to upgrade to the latest firmware first in order to do ANYTHING? Can I jump from 1.2.1i to 2.1.4i with no issues?
It's a shame COS is so buggy, I'm sure the potential of the hardware inside isn't being put to use with this crappy rom.
An absolute beginners guide to this would be so appreciated...
You just need to update to latest Color OS available first. Its right HERE. Then unify your storage. After that you're good to go.
Sent ya a message on hangouts mate!
Also, you've probably got a newer LCD panel - most ROMs and recoveries are not compatible with LCD Panel R63419.
Dialing *##*37847# should tell you the screen type.
Latest TWRP recovery and OmniROM are compatible with LCD Panel R63419.
pobbel said:
Also, you've probably got a newer LCD panel - most ROMs and recoveries are not compatible with LCD Panel R63419.
Dialing *##*37847# should tell you the screen type.
Latest TWRP recovery and OmniROM are compatible with LCD Panel R63419.
Click to expand...
Click to collapse
I just checked and I actually don't have the new LCD screen, maybe another indicator as to why my device came preloaded with the oldest firmware :crying:
So based on stormtroopers reply, do I need to upgrade to the latest firmware first in order to do ANYTHING? Can I jump from 1.2.1i to 2.1.4i with no issues?
It's a shame COS is so buggy, I'm sure the potential of the hardware inside isn't being put to use with this crappy rom.
An absolute beginners guide to this would be so appreciated...:fingers-crossed::fingers-crossed:
rahul.90 said:
I just checked and I actually don't have the new LCD screen, maybe another indicator as to why my device came preloaded with the oldest firmware :crying:
So based on stormtroopers reply, do I need to upgrade to the latest firmware first in order to do ANYTHING? Can I jump from 1.2.1i to 2.1.4i with no issues?
It's a shame COS is so buggy, I'm sure the potential of the hardware inside isn't being put to use with this crappy rom.
An absolute beginners guide to this would be so appreciated...:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Omnirom is the only rom that support new lcd for now. Just follow the step.
StormTrooper89 said:
Omnirom is the only rom that support new lcd for now. Just follow the step.
Click to expand...
Click to collapse
he does not have the new lcd screen
suraj.das said:
he does not have the new lcd screen
Click to expand...
Click to collapse
Thats what happen when read while eat. :laugh:
Hi. I just bought a XTRONS PB68WRJP for my Jeep Grand Cherokee. The ROM and MCU are:
- ROM px5-userdebug 8.0.0 OPR5.170623.007 eng.htc (20180301.104343 test-keys)
- MCU MTCE_GS_V2.73_3 Jan 5 2018 09:59:38
I would like to know if there are updates available and from where I can get it.
Second, I would like to know how to enable the Split Screen function that actually is not working on my unit.
Thank you in advance.
This is where I downloaded my updates..
https://yadi.sk/d/umCvHqCDzHccr
The Easiest way to get an update is to contact the Xtrons Support, they are answering quickly ( 1 Day ). Then you are safe that this update is working with your device.
haunter1982 said:
The Easiest way to get an update is to contact the Xtrons Support, they are answering quickly ( 1 Day ). Then you are safe that this update is working with your device.
Click to expand...
Click to collapse
easiest? lol thats pretty hard too, the support is almost non existant. still waiting on my requests.
ChiefWilNel said:
easiest? lol thats pretty hard too, the support is almost non existant. still waiting on my requests.
Click to expand...
Click to collapse
Install the @Hal9k_ Android 9 ROM and you will be happy!
royalhawk2002 said:
Install the @Hal9k_ Android 9 ROM and you will be happy!
Click to expand...
Click to collapse
how will i know if it will work with mine? its definately not a PX5
ChiefWilNel said:
how will i know if it will work with mine? its definately not a PX5
Click to expand...
Click to collapse
I understood, it was an Xtrons like mine, but in any case look at pre-requisites here:
https://forum.xda-developers.com/an...t/rom-hal9k-mod-v4-mtcd-e-head-units-t4046361
Hello, I bought a Winca S170 head unit and I would like to know if there are custom ROMS or at least any updates for this device. My HU is already rooted.
D4rk_Seraph said:
Hello, I bought a Winca S170 head unit and I would like to know if there are custom ROMS or at least any updates for this device. My HU is already rooted.
Click to expand...
Click to collapse
You should look for it on a roadnav.com forums.
Kotix builds custom ROMs and UI for winca devices.
Tux2609 said:
You should look for it on a roadnav.com forums.
Kotix builds custom ROMs and UI for winca devices.
Click to expand...
Click to collapse
Hi ,I have the same issue. unfortunately roadnav.com only supports RN units that is made by them and Winca roms can not be found there.
We do not know how we can find original and updated roms for our units.
could any one help us?
It is really annoying!:crying:
arian141 said:
Hi ,I have the same issue. unfortunately roadnav.com only supports RN units that is made by them and Winca roms can not be found there.
We do not know how we can find original and updated roms for our units.
could any one help us?
It is really annoying!:crying:
Click to expand...
Click to collapse
I had winca s100 HU before and I always used firmware from roadnav. S series devices have compatible ROMs with the ones on roadnav forums. I might be wrong regarding new versions but I doubt it.
You should ask someone there, either Leigh or Kotix should know much more than I do.
Tux2609 said:
I had winca s100 HU before and I always used firmware from roadnav. S series devices have compatible ROMs with the ones on roadnav forums. I might be wrong regarding new versions but I doubt it.
You should ask someone there, either Leigh or Kotix should know much more than I do.
Click to expand...
Click to collapse
I Asked both of them today and unfortunately they do not have any experience about winca s170!
Tux2609 said:
You should look for it on a roadnav.com forums.
Kotix builds custom ROMs and UI for winca devices.
Click to expand...
Click to collapse
Unfortunately Roadnav forums do not have ROMS for S170 at the moment, only S160 and earlier. I need to reflash my S170 cause the digital TV shows no image, only audio, and this problem started after an debrick made by an technician and I dont have time (nor patience) to go back to him to correct the problem.
I'm wondering here if GTX ROM could be compatible with S170, cause it uses Intel Sofia 3gr like Joying HUs and I'm using the Joying Extra Tools app with no problem.
Hi,
Iv tried to learn as much as I can off the forum before posting but I am still unsure on how to proceed updating/upgrading my headunit as it is running very slow,
Here is the info
MTCD_GS_V2.38_1
Mar 14 2017
Android version 5.1.1
kernel version
3.0.101+
[email protected] #119
Build number
rk3188-userdebug 22022017.10:51:05
Model
A-Media AUTO (1024x600w)
CPU ARM cortex-A9 @1,6ghz (x4)
Memory 1024
Can anyone point me the way in what I can do/need to do to update it and get better performance? My unit is made for the mercedes CLS, would this effect anything, can I also upgrade from Lollipop for an updated user interface?
Many thanks, Alex
alexpuk said:
Hi,
Iv tried to learn as much as I can off the forum before posting but I am still unsure on how to proceed updating/upgrading my headunit as it is running very slow,
Here is the info
MTCD_GS_V2.38_1
Mar 14 2017
Android version 5.1.1
kernel version
3.0.101+
[email protected] #119
Build number
rk3188-userdebug 22022017.10:51:05
Model
A-Media AUTO (1024x600w)
CPU ARM cortex-A9 @1,6ghz (x4)
Memory 1024
Can anyone point me the way in what I can do/need to do to update it and get better performance? My unit is made for the mercedes CLS, would this effect anything, can I also upgrade from Lollipop for an updated user interface?
Many thanks, Alex
Click to expand...
Click to collapse
The problem is that is just 1gb ram. You can upgrade your som to a px5 for better performance....
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
The problem is that is just 1gb ram. You can upgrade your som to a px5 for better performance....
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
thank you I will look more into the new board, will I run into problems with the bluetooth and wifi? I have seen a few mentions of this.
In the meantime can i update the MCU and maybe a lighter ROM to help speed things up? Im unsure of which to look for to do this
Thanks, Alex
alexpuk said:
thank you I will look more into the new board, will I run into problems with the bluetooth and wifi? I have seen a few mentions of this.
In the meantime can i update the MCU and maybe a lighter ROM to help speed things up? Im unsure of which to look for to do this
Thanks, Alex
Click to expand...
Click to collapse
https://r.tapatalk.com/shareLink/to...3&share_fid=3793&share_type=t&link_source=app
Read the first posts of that thread I linked to understand how to upgrade and follow the recommendations for 1gb ram devices
For the mcu update....
Navigate to dmcu folder and your manufacturer GS
https://yadi.sk/d/umCvHqCDzHccr
Guys, I am badly in need of help to get this device to work Secure Folder and Samsung Pass, I read on internet that, this device is One UI Core and not One UI, so it lacks in most of the features from Original One UI,
Can anyone recommend a better solution? Any possibility to replace or upgrade to One UI from One UI Core? HELP...
Mostly impossible, unless someone decides to port full One UI. I tried to do it but my device ended up getting bricked, right now it's in a repair shop.
Thanks for the reply.
m7tech said:
Guys, I am badly in need of help to get this device to work Secure Folder and Samsung Pass, I read on internet that, this device is One UI Core and not One UI, so it lacks in most of the features from Original One UI,
Can anyone recommend a better solution? Any possibility to replace or upgrade to One UI from One UI Core? HELP...
Click to expand...
Click to collapse
Hi I can help you with this.
First of all does A22 4G have TWRP? If you want help with twrp, ping me here on personal message.
Regards,
[email protected]
Akhil99 said:
Hi I can help you with this.
First of all does A22 4G have TWRP? If you want help with twrp, ping me here on personal message.
Regards,
[email protected]
Click to expand...
Click to collapse
I think yes, I saw somewhere here in Xda! whats next?
BlueTower said:
Mostly impossible, unless someone decides to port full One UI. I tried to do it but my device ended up getting bricked, right now it's in a repair shop.
Click to expand...
Click to collapse
Got it back? Is it alive again?
BlueTower said:
Mostly impossible, unless someone decides to port full One UI. I tried to do it but my device ended up getting bricked, right now it's in a repair shop.
Click to expand...
Click to collapse
wizzROM Creator
wizzROM Creator Mediatek Turn any stock or custom OneUI into a QwizzROM or RwizzROM OneUI 2.0 will become QwizzROM OneUI 3.1 will become RwizzROM Debloated ROM with Extras Extras: Battery charge limit Clean Master ES file explorer HKtweaks...
forum.xda-developers.com