Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
kun_ken said:
Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
Click to expand...
Click to collapse
Add to the list:
RAVPower Qi Charger (Works Pretty good, Sometimes I have to unplug and replug the charger) <$40
RAVPOWER AMAZON LINK
MOCREO(TM) 10000mAh High Capacity Portable Power Bank Qi-Enabled Single-Position Wireless Charger Charging Pad TX-5600 (DoCooler, Choe, and Skyrocket are all the same as this one) (Works really good and it's completely wireless!!!! << About $50-$70 too!
SOLD OUT BUT LOOK UP THE OTHER ONES I NAMED
Just about any case will work with the current wireless chargers so this thread is pretty redundant to the other wireless charging threads.
However, I might as well contribute.
LG WCP-700 (Works well with the Neo Hybrid case)
http://www.amazon.com/LG-WCP-700-Portable-Office-Charging/dp/B005DMBSVA
AWESOME. I just ordered a wireless charger yesterday and I have that case, good to know
btw the gold is an awesome color
Anyone tried if:
1. The official nexus Charger works with the neo hybrid
2. Are the magnets strong enough to be used as a car mount with the case?
Unfortunately the Spigen Neo Hybrid doesn't works with the Nokia DT910, it makes the Nexus 5 being a little more up on the stand, and the recoil for the wireless isn't aligned anymore and don't want to charge ... Now I have a case to sell if anyone is interested (Neo Hybrid Champagne Gold)...
Spigen Neo Hybrid works with official wireless charger, and magnetic capability work too !
Glutt0ny said:
Unfortunately the Spigen Neo Hybrid doesn't works with the Nokia DT910, it makes the Nexus 5 being a little more up on the stand, and the recoil for the wireless isn't aligned anymore and don't want to charge ... Now I have a case to sell if anyone is interested (Neo Hybrid Champagne Gold)...
Click to expand...
Click to collapse
I have the Neo Hybrid and the DT910 - works fine. Occasionally it won't start charging if I set it on the stand mis-aligned, but if I'm a little careful it works...use it for every overnight charge as a night clock, too. My DT-900 plate on my desk also works perfectly with the Neo Hybrid case.
xlys said:
Spigen Neo Hybrid works with official wireless charger, and magnetic capability work too !
Click to expand...
Click to collapse
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
I have the Nillkin Magic Disc, works perfect with Neo Hybrid Gold.
P90Puma said:
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
Click to expand...
Click to collapse
I wouldn't rely on the magnets for this in the car if I was using a case. I wouldn't have any problem relying on the magnets when the phone is not in a case (I don't use one myself) as the official nexus magnets are very stable, provided you practice with it to get really used to getting it in the sweet spot...it's kinda funny, for me it feels almost like it notches into place if I give it just the right amount of force on the phone) but through the thickness of the case, I'm sure it would be very prone to falling off.
Not to mention when you hit a bump in the road. Come to think of it, maybe even without a case it would be capable of popping off. Don't know, I don't drive.
( I do use the official charger at home, mounted in the similar way as what you would have in a car though, it's attached to the side of my dresser which is next to my bed so I can just turn over and look at it if needed, and so it works well with voice commands if I'm taking a nap or whatever. )
I've been using the Nokia DT-900 and the Spigen Neo Hybrid Case with no problems
P90Puma said:
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
Click to expand...
Click to collapse
They don't with the case
kun_ken said:
Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
Click to expand...
Click to collapse
Can you explain, please: did you use official Samsung wireless back cover & Spigen cover + wireless charger?
Or some Qi receiver and standart back cover?
I just bought samsung wireless back and it's work fine, but I afraid that spigen cover didn't fit.
If you use standart back cover and Qi receiver, did it fit well in spigen case in result?
Thank you!
imort said:
Can you explain, please: did you use official Samsung wireless back cover & Spigen cover + wireless charger?
Or some Qi receiver and standart back cover?
I just bought samsung wireless back and it's work fine, but I afraid that spigen cover didn't fit.
If you use standart back cover and Qi receiver, did it fit well in spigen case in result?
Thank you!
Click to expand...
Click to collapse
This is the Nexus 5 forum, nobody should be using a Samsung back cover on this phone...
snives said:
This is the Nexus 5 forum, nobody should be using a Samsung back cover on this phone...
Click to expand...
Click to collapse
Omg, sorry, find this thread by search and didn't see in which forum it belongs.
There is a QI case for the Z.
Sony's official QI solution for the Z2 requires their own QI case accessory .
So why nothing for the Z1?
MobileBritain said:
There is a QI case for the Z.
Sony's official QI solution for the Z2 requires their own QI case accessory .
So why nothing for the Z1?
Click to expand...
Click to collapse
It probably wasn't selling well. It is pretty pointless as there are pogo pins on the phone that can be used with a magnetic charging dock.
There has never been one.
The Z2 has the same connector and Sony don't view that as pointless.
Have you ever used a QI charger?
Far easier than the magnetic connector.
My magnetic charging cable has stopped working. It was a cheap one from eBay, but lasted since launch.
I'm using a Diztronic case. Is there a magnetic charging dock that fits a z3c with this case? I'm in Canada, trying not to break the bank.
Alternatively, is there a recommended cable everyone endorses?
I use this one. It's probably going to be more expensive than the one you got from eBay, but it's worked pretty well for me.
http://www.amazon.ca/Magnector-Impr...GK3YI/ref=sr_1_fkmr0_1?ie=UTF8&qid=1455998239
It's got a convex curve that is meant to conform with the curvature of the side of the phone, but with a case on, it obviously makes it impossible to connect. I have a Devilcase, which is probably about as thick as your Diztronic. I just took a knife and cut the edge opposite the light, down to the little strip running along side. It now connects perfectly with the case on.
As for me - dock
Maybe I am a little too late to answer.
I use this one:
Wsken usb magnetic cable For Sony Xperia Z3 Z2 Z1 charging adapter charger cable - from AliExpress. Was around $8 only.
Store:BAOSIGHT Digital Technology
Sorry, can't post links. Don't have privileges, being a new member here.
Nice build quality and fast enough charging (at least faster than the earlier Htc cable I was using).
Although, the magnetic connection does not automatically snap at the exact pin location. Takes some fiddling around. Maybe that's the case with all such cables, I haven't used any other.
Nonetheless, I am very satisfied.
I've tried 3 or so different sorts, they all require a bit of fiddling sadly, shape of the z3c isn't helping
I use this one from Amazon.
https://www.amazon.ca/Changeshoppin...words=sony+xperia+z3+compact+magnetic+charger
Anyone ever seen a cheap/easy qi module for motomod phones? Several older phones with contacts allowed the addition of a qi module without messing with the micro usb port, such as the Galaxy S5... see link for image:
https://www.gadgets4geeks.com.au/We...ss-receiver-card-for-samsung-galaxy-s5-03.jpg
Anyone seen one of these cheaper qi module that fits a motomod (they sell for less than $5 on ebay) ? They are super thin, so would fit under a case without any sort of bump.
EDIT: I am well aware of the various Qi motomods that add wireless charging... the problem with those? You can't add a case of your choosing and it adds quite a bit to the thickness of the phone for a minimum $30.
Is there a comprehensive list of cases which actually support wireless charging?
I get similar issues with the Fold3. Most cases have that lip to help protect the camera, which just barely messes with the charging pad and causes no charging.
Any recommendations for a case for the fold4 that doesn't have a flip cover, which also fully supports the wireless charging?
Not a deal breaker, but I have previously invested in the OhSnap system (similar to magsafe) and works beautifully with my Note20) would love to continue using that.
I bought this case and while it does work great with wireless charging I'm very unhappy with it. Cost a lot of money and it doesn't seem very good at protecting the phone and has nothing over the hinge.
https://www.amazon.com/TORRAS-Shockproof-Military-Translucent-Protective/dp/B0B5CZYR4F/ref=sr_1_3?crid=1DRKVKSI0B81U&keywords=TORRAS+Shockproof+Galaxy+Z+Fold+4&qid=1674073023&sprefix=torras+shockproof+galaxy+z+fold+4%2Caps%2C215&sr=8-3&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc
..I just ordered this one (which is what I had for my Fold 3) that is even more expensive and it should arrive tomorrow evening. I had one for my fold 3 and it didn't really work well with the wireless charging, but I am willing to deal with that to protect the phone. Once I get it I will report back and let you know how well it works wireless charging.
https://www.amazon.com/SUPCASE-Unicorn-Full-Body-Protector-Kickstand/dp/B0B7MC26MS
Staying tuned!
Update!
Just put my fine new SUPCASE Unicorn Beetle Pro case on my Z Fold 4 and sat it on my wireless charger. Good news! Its currently charging at 10w wirelessly -- so it works! wooohoo!
This case:
https://www.amazon.com/SUPCASE-Unicorn-Full-Body-Protector-Kickstand/dp/B0B7MC26MS?tag=xdaforum01-20
I am using this wireless charger so I can verify it's doing it at 10watts
https://www.amazon.com/dp/B0B5L9NQWN?psc=1&ref=ppx_yo2ov_dt_b_product_details