Related
Right now if the battery level is below certain point, the brightness setting and stand-by time setting get automatically set by the system, and cannot be changed.
I don't know what app or what part of the system is doing this for me automatically. I unchecked "power saving mode" and still.
This is very frustrating. I understand the phone may THINK it's helping me save battery but in fact the brightness I want and I usually set is even LOWER than the auto value the phone sets for me. And besides, I don't like the idea that MY phone is being controlled by someone/something else and I don't have an option to disable that something.
Someone please shed some light?
Edit:
Note that this is NOT the "power saving mode". I disabled "power saving mode" and still this problem.
513263337 said:
Right now if the battery level is below certain point, the brightness setting and stand-by time setting get automatically set by the system, and cannot be changed.
I don't know what app or what part of the system is doing this for me automatically. I unchecked "power saving mode" and still.
This is very frustrating. I understand the phone may THINK it's helping me save battery but in fact the brightness I want and I usually set is even LOWER than the auto value the phone sets for me. And besides, I don't like the idea that MY phone is being controlled by someone/something else and I don't have an option to disable that something.
Someone please shed some light?
Click to expand...
Click to collapse
this is the last 5% of battery correct?
G1_enthusiast said:
this is the last 5% of battery correct?
Click to expand...
Click to collapse
I don't know the number right now. I'll keep an eye on phone as the battery drops and let you guys know the exact threshold that triggers this.
If it's some system app that's doing this, I have no problem freezing it using Titanium Backup just like how I freezed "Tethering Manager" to enable wifi hotspot and I freezed "My Account" so that 3G doesn't come on when wifi is connected.
Just don't know which app it is...
have you flash other roms to see if it go away? i think jug 2.0 take away this problem
And the even more ridiculous thing about it is that it auto sets the stand-by time to 30 seconds, and after I charge the battery to above the threshold it doesn't change the stand-by time back to where you set it! You have to change it back yourself.
Did you try a master reset and see if that fixed it?
No guys its like builtin in alot of roms with out apps... Its the system
Sent From my Galaxy S II T-Mobile
For me there is a "power savings mode" right in the settings menu that does what you describe. Granted I'm not on stock ROM, but I think it was there with the Telus ROM too.
Liquid5n0w said:
For me there is a "power savings mode" right in the settings menu that does what you describe. Granted I'm not on stock ROM, but I think it was there with the Telus ROM too.
Click to expand...
Click to collapse
sounds exactly like pwer saving mode!! its in the settings
movieaddict said:
sounds exactly like pwer saving mode!! its in the settings
Click to expand...
Click to collapse
This isnt power saving mode causing this. Power saving mode is turned off and this still happens to me once my battery hits like 10%. This is built into the rom somewhere and the vibrant had the same thing. One of the devs for the vibrant was able to disable this setting in their rom so maybe the devs can do the same here. Again this is not power saving mode which can be set at certain levels that you would like.
Sent from my SGH-T989 using xda premium
Yeah once it reach 5%, the autobrightness become very bright and doesn't change..I have tested it on all ROM..and it's not the powersaving..I think it drain the battery really fast to help mentation the health of the battery..just guessing though..and stock ROM is more sensitive than jnault ROM..
Sent from my SGH-T989 using XDA App
Monk4Life said:
This isnt power saving mode causing this. Power saving mode is turned off and this still happens to me once my battery hits like 10%. This is built into the rom somewhere and the vibrant had the same thing. One of the devs for the vibrant was able to disable this setting in their rom so maybe the devs can do the same here. Again this is not power saving mode which can be set at certain levels that you would like.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
kt0ce said:
Yeah once it reach 5%, the autobrightness become very bright and doesn't change..I have tested it on all ROM..and it's not the powersaving..I think it drain the battery really fast to help mentation the health of the battery..just guessing though..and stock ROM is more sensitive than jnault ROM..
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
You guys are right. It's not the power saving mode. This happens even when I turn OFF my power saving mode. It's something else in the system that's doing this, and yes, the auto brightness the system sets is even brighter than what I previously set myself. So, what a useful feature!
mine does the right thing, opposite of what your phones are doing. im guessing at about 5% battery life, the display sets itself pretty close to the lowest (if not the lowest) brightness setting, even with my power saving mode option unchecked. i wonder if the auto adjust screen power has something to do with it, since i got that checked all the time. but maybe not. im running on beastmod 1.0 rom.
Hi Guys,
New to HTC Phones, fairly simple question.
Done a bit of Googling, can't find definitive answer.
Is there any way to disable the power saver mode coming on at 15% on the M9 ?
I've turned it off, and it just comes on at 15% there doesn't seem to be any option to stop this automatically happening.
Again you can turn it off and it seems to stay off, but crossing the 15% threshold triggers it again.
Any ideas ?
Thanks
DM
No one ?
DangerMUK said:
Hi, ..it just comes on at 15% there doesn't seem to be any option to stop this automatically happening.
Any ideas ?
Thanks
DM
Click to expand...
Click to collapse
Enjoy it!
Before i can remember turning it off from being enabled, but i think that was only through tweaks.
So eventually we will get it in tweaks here too most likely, just have a little patience to get devs settled in with this phone and more stuff will be available to fully customize this phone
Can't you just turn in off or set it on like 5%?
Long story short ... No lol only 15%
Sent from my HTC One M9
So I found this one app " Swipify" that lets me keep the watch face on full time. I like it but it drains the battery a bit faster then I would like. Also when charging the watch the round charge progress bar does not advance so I have no idea how charged it is until I take it off the dock. So I un-installed it. I am looking for an app that will let me keep the watch in the dimmed "Ambient mode" full time and then when I lift the watch to look at it, have it to the full watch face mode until I set my arm back down.
Anyone make such a add-on app by chance? :fingers-crossed:
Or should I start learning how to code apps?
Any chance they (moto) will update with such features?
Thanks,
-DK
I'm not sure if such an app exists, but I'm just about 100% sure that Motorola will never add this feature. The current 5.1.1 software version was significantly delayed because they were trying to optimize battery life. I think it's a combination of a small battery and an old, power hungry processor that is the main problem.
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
SirDigitalKnight said:
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
Click to expand...
Click to collapse
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
closer reading...
thebobmannh said:
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
Click to expand...
Click to collapse
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
SirDigitalKnight said:
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
Click to expand...
Click to collapse
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
thebobmannh said:
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
Click to expand...
Click to collapse
All good, sorry to come off as defensive. :good::highfive:
Been using it with tilt-to-wake turned off and I am finding that by the end of the day I still have plenty of juice left.
With Ambient on and tilt-to wake off I find I have about 35-40% left at the end of a 7am - 11pm day. That is with receiving some email and text notifications (maybe 15-20) during the day.
I know everyone has different uses and ideas of how to use their Moto 360 so everyone's setting are going to be different, but what I am after is a always on "dimmed" or "ambient" mode with the option to turn on tilt to wake so I could test the battery life both ways. I would also like to use my 360 for home automation control and I I know with "Autowear" it is possible but from the little testing I have done so far it would kill my battery way to fast so perhaps on a future SW that will be something I will be doing.
Pausing and starting Netflix or HBOgo or Plex from my 360 is working pretty good for me as a start.
Think I will try and contact the owner of the Swipify app and see what he can do for me...... :laugh:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
pustefix said:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
Click to expand...
Click to collapse
That is very good news! Can not wait to try it out!
Hello, I'm a long time lurker and a new member here. I bought this phone a week ago and I have a strange issue with it.
Honestly I have no idea where else to look for help, I've asked in several posts over on reddit and fb to no avail. I'll try to describe the issue to the best of my abilities.
Anyways, I've noticed that when I switch between apps there is a momentary flicker or increase in brightness of the screen. I searched for a while and found that the screen refresh rate drops to 90hz for a moment and goes back up again. I tried setting the display to 60 hz and the issue disappeared. I tried setting it to 90hz with SetEdit and the brightness increased a bit. As if the brightness setting for 90hz mode is a bit higher than 60 or 120 if that makes sense.
I have 2 videos below one in 120hz mode and the other in 60hz. The camera exaggerates the effect a bit but it's visible with the naked eye in low to moderate lighting conditions i.e indoor use.
https://imgur.com/a/idsj8UO
note that in 120hz mode the refresh rate drops to 90hz for a moment.
Is this normal or do I have a defective unit?
Thanks in advance
khaledegy99 said:
Hello, I'm a long time lurker and a new member here. I bought this phone a week ago and I have a strange issue with it.
Honestly I have no idea where else to look for help, I've asked in several posts over on reddit and fb to no avail. I'll try to describe the issue to the best of my abilities.
Anyways, I've noticed that when I switch between apps there is a momentary flicker or increase in brightness of the screen. I searched for a while and found that the screen refresh rate drops to 90hz for a moment and goes back up again. I tried setting the display to 60 hz and the issue disappeared. I tried setting it to 90hz with SetEdit and the brightness increased a bit. As if the brightness setting for 90hz mode is a bit higher than 60 or 120 if that makes sense.
I have 2 videos below one in 120hz mode and the other in 60hz. The camera exaggerates the effect a bit but it's visible with the naked eye in low to moderate lighting conditions i.e indoor use.
https://imgur.com/a/idsj8UO
note that in 120hz mode the refresh rate drops to 90hz for a moment.
Is this normal or do I have a defective unit?
Thanks in advance
Click to expand...
Click to collapse
As for the Hz drop, this is normal when using this phone because it offers adaptive refresh rate (drops from 120Hz to 90Hz when you switch between apps). As for the flicker/brightness change, it does this to me too so I am guessing it's either a bug or just a result of the implementation of the adaptive refresh but can't be sure about that.
stavrosbin said:
As for the Hz drop, this is normal when using this phone because it offers adaptive refresh rate (drops from 120Hz to 90Hz when you switch between apps). As for the flicker/brightness change, it does this to me too so I am guessing it's either a bug or just a result of the implementation of the adaptive refresh but can't be sure about that.
Click to expand...
Click to collapse
Is there anyway to force the display at constant 120hz?
khaledegy99 said:
Is there anyway to force the display at constant 120hz?
Click to expand...
Click to collapse
Sorry for the long delay. I am pretty sure you can follow this tutorial for this:
https://www.reddit.com/r/Xiaomi/comments/munn6k
. However, I am not 100% it is permanent so you will probably have to do it and see if it changes after a few days.
stavrosbin said:
Sorry for the long delay. I am pretty sure you can follow this tutorial for this:
https://www.reddit.com/r/Xiaomi/comments/munn6k
. However, I am not 100% it is permanent so you will probably have to do it and see if it changes after a few days.
Click to expand...
Click to collapse
It ain't permanent... Just switch to any aosp rom. I'm tired of ****king memeui.
I installed it for performance and convenience of many more features but dumb stuff like this is unbearable at this point. I've tried many more stuff other than this and usually just downloading setprop app and changing user_refresh_rate value to 0 disables refresh rate switching. But only for a while , doesn't survive reboots and locking screen or opening certain blackilsted apps like mobile legends and such that are hard locked by miui at certain screen refresh rates....
Do yourself a favour and uninstall Miui
Rstment ^m^ said:
It ain't permanent... Just switch to any aosp rom. I'm tired of ****king memeui.
I installed it for performance and convenience of many more features but dumb stuff like this is unbearable at this point. I've tried many more stuff other than this and usually just downloading setprop app and changing user_refresh_rate value to 0 disables refresh rate switching. But only for a while , doesn't survive reboots and locking screen or opening certain blackilsted apps like mobile legends and such that are hard locked by miui at certain screen refresh rates....
Do yourself a favour and uninstall Miui
Click to expand...
Click to collapse
It is working for now. I'm planning to install arrowos. Do you know if it supports dc dimming for reading at night?
khaledegy99 said:
It is working for now. I'm planning to install arrowos. Do you know if it supports dc dimming for reading at night?
Click to expand...
Click to collapse
No idea... It doesn't say anything
Anyone else notice the phone also got super snappy and smooth all the time? I tried turning on show refresh rate an hour ago just to find out the phone never go back down to 60hz.
I tried not touching the screen untill it actually auto lock, opening youtube, netflix, tiktok, chrome, settings etc etc. I even rebooted and no change. Battery life has been slightly better which is kinda weird though.
Also i checked twice, the force peak refresh rate is turned off.
Try clearing the system cache.
wanttotree said:
Anyone else notice the phone also got super snappy and smooth all the time? I tried turning on show refresh rate an hour ago just to find out the phone never go back down to 60hz.
I tried not touching the screen untill it actually auto lock, opening youtube, netflix, tiktok, chrome, settings etc etc. I even rebooted and no change. Battery life has been slightly better which is kinda weird though.
Also i checked twice, the force peak refresh rate is turned off.
Click to expand...
Click to collapse
I just checked my phone (updated to .037), and the refresh rate is still dropping to 60hz whenever there is no input, so the adaptive refresh rate still works on my end.
My phone is dropping to 60 when there's no input as well. I just played a YouTube video and it went to 60.
On my device i have the exact same problem. As you already described, it is "always" on 120hz - it only jumps down to 60 Hz for a very brief moment, then again reaches the 120hz. This cicle is repeating itself as long as the display is turned on.
I already tried disabling all overlay services and other settings that could, as far as I could think of, have an impact on these behavior, like apps that have access to usage or device controll etc.
But as for now, I don't have a solution for this.
The strange part is that i also have a better display on time since the last update, but after checking the battery temperature for the last week (i installed the .037 on thursday) it reaches higher temperatures now as it was before the update, with around 34 Celsius on .036 vs 38 Celsius on .037 after around an hour of the same activities in the mostly same environment. The temperature difference does make sense for me, because the screen won't chill as it should. On the other hand, the longer battery life does'nt seem to fit too well in this picture.
Rauchinator said:
On my device i have the exact same problem. As you already described, it is "always" on 120hz - it only jumps down to 60 Hz for a very brief moment, then again reaches the 120hz. This cicle is repeating itself as long as the display is turned on.
I already tried disabling all overlay services and other settings that could, as far as I could think of, have an impact on these behavior, like apps that have access to usage or device controll etc.
But as for now, I don't have a solution for this.
The strange part is that i also have a better display on time since the last update, but after checking the battery temperature for the last week (i installed the .037 on thursday) it reaches higher temperatures now as it was before the update, with around 34 Celsius on .036 vs 38 Celsius on .037 after around an hour of the same activities in the mostly same environment. The temperature difference does make sense for me, because the screen won't chill as it should. On the other hand, the longer battery life does'nt seem to fit too well in this picture.
Click to expand...
Click to collapse
As far as we know, it's currently buggy anyway, since the
Pixel 6 Pro is consuming more power in 60Hz mode than in 120Hz one*
Click to expand...
Click to collapse
Pixel 6 Pro Consuming More Power In 60Hz Mode Than In 120Hz One
The Google Pixel 6 Pro seems to be consuming more power in 60Hz mode, than it does in 120Hz mode. Needless to say, this is not normal, as higher refresh
www.androidheadlines.com
*in certain scenarios, like low brightness
Battery life tests have also shown that there is only a minor difference in battery life between 60hz or 120hz, so it doesn't really matter and you should - because of that - 120hz anyway since it's a much better experience.
Anyone from the UK had this update yet?
I only ask because I don't have any major issues and fingers crossed this update doesn't make anything worse.
wilpang said:
Anyone from the UK had this update yet?
I only ask because I don't have any major issues and fingers crossed this update doesn't make anything worse.
Click to expand...
Click to collapse
Officially it's only a rollout in the USA and Canada, it will come to the rest of the world with the December update (or you manually sideload it, as I did).
Morgrain said:
Officially it's only a rollout in the USA and Canada, it will come to the rest of the world with the December update (or you manually sideload it, as I did).
Click to expand...
Click to collapse
Notice anything major from the update?
Morgrain said:
As far as we know, it's currently buggy anyway, since the
Pixel 6 Pro Consuming More Power In 60Hz Mode Than In 120Hz One
The Google Pixel 6 Pro seems to be consuming more power in 60Hz mode, than it does in 120Hz mode. Needless to say, this is not normal, as higher refresh
www.androidheadlines.com
*in certain scenarios, like low brightness
Battery life tests have also shown that there is only a minor difference in battery life between 60hz or 120hz, so it doesn't really matter and you should - because of that - 120hz anyway since it's a much better experience.
Click to expand...
Click to collapse
Adaptive refresh is totally borked on the 6Pro.