I currently have the US s20Ultra unlocked model on ATT (don't foresee changing carriers). Currently I am missing features like VoLTE and VVM. What other features would I be missing if I stay on the unlocked firmware? Can I flash the ATT firmware to get those missing features? Can I flash back to unlock?
Thank you
What's the CSC on your device?
varcor said:
What's the CSC on your device?
Click to expand...
Click to collapse
I am not sure what I am looking for. Its currently on ATT/ATT.
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
My CSC: G988U1OYM1ATE4
garyHal said:
My CSC: G988U1OYM1ATE4
Click to expand...
Click to collapse
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
garyHal said:
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
Click to expand...
Click to collapse
You're most welcome. Yes, flashing back to unbranded won't be a problem. I don't think you will be able to retain the features if you go back to the unbranded firmware, it's not configured to allow full call feature functionality. Also, after flashing to the AT&T firmware you may need to contact their CSR for external programing. Good luck!
S20+ AT&T
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020.G986USQU1ATE6 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Raigar said:
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020SAOMC_SM-G986U-OYN_ATT_QQ_0023 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Click to expand...
Click to collapse
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
varcor said:
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
Click to expand...
Click to collapse
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Raigar said:
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Click to expand...
Click to collapse
Flashing Singtel Firmware won't work since it's configured for the Exynos SoC. Multi-SIM Devices have only regional Service Providers available, you don't have Singtel as an option in an AT&T device. Based on your situation I would consider one of two options. The first would be insert an AT&T SIM just for OTA updates. Not sure if you received an AT&T SIM when you purchased the device, if you didn't they're not hard to find. The second and likely best option is sell the device and purchase a Global Variant with a Snapdragon SoC, you'll receive updates regardless of your Service Provider. If it makes you feel any better there's lots of users in the same predicament. They want the Snapdragon device in regions selling mainly Exynos devices. Workarounds are in many situations are challenging,
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
itchyUnder said:
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
Click to expand...
Click to collapse
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
varcor said:
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
Click to expand...
Click to collapse
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
itchyUnder said:
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
Click to expand...
Click to collapse
Flashing ATT Dedicated Firmware would give you the best chance for additional call features ASSUMING your Ulocked Device is capable of incorporating those features. It should do the trick since the hardware is identical to an ATT device. I would head to an ATT Store to get a definitive answer. Samsung has made it more and more challenging to mix and match branded and unlocked devices with CSC or Firmware modifications. In many cases you won't know until you try. Users want their smartphones to be smart, to work perfectly in every situation but the major carriers use proprietary tools to hold clients hostage.
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
romano_ezzat said:
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
Click to expand...
Click to collapse
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
varcor said:
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
I misunderstanding
What a trick bro
It's a link for firmware updates
I need to know which one compatible with my note
And after flash will still unlocked?
Hi All,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020.G986USQU1ATE6 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Try here
https://samfw.com/firmware/SM-G986U
Hi Detection, thank you for the firmware list. but based from the list, how do I know which one that is compatible with my device?
Raigar said:
Hi Detection, thank you for the firmware list. but based from the list, how do I know which one that is compatible with my device?
Click to expand...
Click to collapse
All of them for that model S20, you just need to match the model, any region will work fine
Hi,
Are you sure I can flash Verizon firmware into AT&T device? CSC may to match?
Thks
So I had a bad install of the Verizon August security patch causing battery and Bluetooth issues. For fun, I decided to install the U1 firmware. The software on Sammobile for July 2020 under U1 USA (Verizon) is the Staw Wars version. This version can be installed as long as you are on bootloader 4. Whats interesting is on Verizon, you end up with VZW/VZW/VZW under software service provider.
The only difference I can see in software versions is that the Star Wars model has OYZ in the name, while the regular XAA model is OYM.
Guyinlaca said:
So I had a bad install of the Verizon August security patch causing battery and Bluetooth issues. For fun, I decided to install the U1 firmware. The software on Sammobile for July 2020 under U1 USA (Verizon) is the Staw Wars version. This version can be installed as long as you are on bootloader 4. Whats interesting is on Verizon, you end up with VZW/VZW/VZW under software service provider.
The only difference I can see in software versions is that the Star Wars model has OYZ in the name, while the regular XAA model is OYM.
Click to expand...
Click to collapse
As far as the CSCs go, they makes sense. Mine is TMB/TMB/XAA. The last CSC is hard-coded and will never change. It merely reflects where the device was intended to go...carrier or factory unlocked.
The first two CSCs reflect the sales code of the carrier you're using it on (so the SIM, basically), and the other is the features unique to that carrier. For example, with the unlocked firmware, i still get WiFi calling on TMB, whereas you won't on VZW, despite running identical firmware. They change when the phone provisions the SIM.
It should also be noted that unlike previous Android versions, Wifi Calling DOES work on Verizon with U1 firmware on Android 10.
Guyinlaca said:
So I had a bad install of the Verizon August security patch causing battery and Bluetooth issues. For fun, I decided to install the U1 firmware. The software on Sammobile for July 2020 under U1 USA (Verizon) is the Staw Wars version. This version can be installed as long as you are on bootloader 4. Whats interesting is on Verizon, you end up with VZW/VZW/VZW under software service provider.
The only difference I can see in software versions is that the Star Wars model has OYZ in the name, while the regular XAA model is OYM.
Click to expand...
Click to collapse
Can you share me the link to download firmware
You have to find it through Sammobile. Search under firmware and by your model number. Make sure you know what you're doing before flashing, and it will wipe your phone.