{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Install the stock recovery.img if you have previously installed twrp.
1. Extract the zip to your adb/fastboot directory, reboot to bootloader and open a CMD window.
2. Reboot your device into fastbootd mode.
Code:
fastboot reboot fastboot
3. Flash boot, system, product, and vbmeta images.
Code:
[/B][/CENTER]
[B][CENTER]fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
4. Wipe userdata.
Code:
fastboot -w
5. Reboot, Profit.
(OPTIONAL)
6. If you want to install TWRP/gapps/magisk, do so after you continue through the installation steps to the home screen.
If you have the Moto G8/G Fast and your display cutout is not right, enable the overlay via ADB:
Code:
adb shell cmd overlay enable org.omnirom.overlay.moto.rav
ROM Download
GApps
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
1. Starting screen casting/mirroring causes a reboot.
2. The in-built screen recorder also causes a reboot when started.
Dodgy Screen Recorder Fix :laugh:: Download and install the attached apk below, change the quick setting tile to the new one at the bottom of the list, and you should be able to record. (Its the screen recorder app from BlissRom, nothing malicious )
3. Let me know :good:
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
To update to the latest version without wiping:
UPDATING FOR GAPPS/MAGISK USERS
1. Install the images as usual in fastbootd
2. Power off and boot to TWRP
3. Install GAPPS and/or Magisk
4. Reboot, profit.
UPDATING FOR NON GAPPS/Magisk USERS
Skip steps 2. and 3. from above.
Cant figure out which drive i uploaded the old files to at the moment
But heres the 8.6.9 May security patch update.
Not much new, added a KCAL enabled kernel as default, and added a color control app (root needed), fixed face unlock (g power) and added the moto clock widgets.
RR - May Patch - Google Drive
drive.google.com
TWRP zip and fastboot d images, no gapps only. Theres also some flame gapps in the folder too that i use and work well.
I have a moto g stylus and the phone does not have fastbootd mode, i dont think.
gking707 said:
I have a moto g stylus and the phone does not have fastbootd mode, i dont think.
Click to expand...
Click to collapse
it does but you have to boot into recovery to enter fastbootd mode
MadMan29729 said:
it does but you have to boot into recovery to enter fastbootd mode
Click to expand...
Click to collapse
Or you can boot into fastbootd by using adb in fastboot mode and typing "fastboot reboot fastboot"
Thanks op for my favorite rom RR.
Only issue is whats reported in the o.p.
Not really a problem since regional models have faceunlock, but faceunlock feature not operable.
I noticed any of the custom roms faceunlock feature works on them. only the stock rom... hope thers a fix. A Motorola update has some bug fixes stock build retus dated 11/16/2020.
I also love how the stock moto camera works by downloading the apk from the playstore (moto camera2)
The stock camera has action cam which i use.
I don't use screen recording anyways.
Great job!!! I appreciate your work.
I cant find the three finger screenshot.
I did see a setting in RR settings but only to use volume keys or drag option. the drag option screenshot works but i cant get the volime key combo to work.
jhjhjhjhjhjh said:
Thanks op for my favorite rom RR.
Only issue is whats reported in the o.p.
Not really a problem since regional models have faceunlock, but faceunlock feature not operable.
I noticed any of the custom roms faceunlock feature works on them. only the stock rom... hope thers a fix. A Motorola update has some bug fixes stock build retus dated 11/16/2020.
I also love how the stock moto camera works by downloading the apk from the playstore (moto camera2)
The stock camera has action cam which i use.
I don't use screen recording anyways.
Great job!!! I appreciate your work.
I cant find the three finger screenshot.
I did see a setting in RR settings but only to use volume keys or drag option. the drag option screenshot works but i cant get the volime key combo to work.View attachment 5153117
Click to expand...
Click to collapse
Thank you for the nice comment.
For the three finger screenshot, its in Settings/Resurrection Tools/Interface/Miscellaneous.
And the volume keys option doesnt seem to work, but power and volume down works as usual
Beetle84 said:
Thank you for the nice comment.
View attachment 5153183
For the three finger screenshot, its in Settings/Resurrection Tools/Interface/Miscellaneous.
And the volume keys option doesnt seem to work, but power and volume down works as usual
[/QUOTE
Thanks yes volune down and power works
Click to expand...
Click to collapse
just fyi the oden.zip kernel works pretty good on RR. the one fron the havoc rom.
I flahsed it in twrp..touchscreen now works in twrp.
jhjhjhjhjhjh said:
just fyi the oden.zip kernel works pretty good on RR. the one fron the havoc rom.
I flahsed it in twrp..touchscreen now works in twrp.View attachment 5154753
Click to expand...
Click to collapse
You wouldnt have needed the odin kernel.zip, its included as the default kernel now.
jhjhjhjhjhjh said:
just fyi the oden.zip kernel works pretty good on RR. the one fron the havoc rom.
I flahsed it in twrp..touchscreen now works in twrp.View attachment 5154753
Click to expand...
Click to collapse
But after flashing it twrp is working fine now? Weird
RR updated.
Version bump to 8.6.5
Added OPScreenRecorder.apk as system app.
Removed built-in Screen Recorder QS Tile. (only the working one appears now)
Removed Recorder app as it links to in-built broken screen recorder.
Added HavocOS audio recorder app.
Added update steps to post #2.
what is the recommend gapps?
Beetle84 said:
RR updated.
Version bump to 8.6.5
Added OPScreenRecorder.apk as system app.
Removed built-in Screen Recorder QS Tile. (only the working one appears now)
Removed Recorder app as it links to in-built broken screen recorder.
Added HavocOS audio recorder app.
Added update steps to post #2.
Click to expand...
Click to collapse
Again thanks ..
Question. hope you can answer.
The gapps package inside the rom zip when extracted, has apps in .lz format. I tried to re-zip the gapps and size is 1.2GB and I also get the error package "corrupt"
The apps in .lz format has android auto in which I'm trying to get working on custom roms rather than just stock.
I believe the gapps package that is small enough to flash is nano and pico nano like 200mb and pico like 91mb.They both lack android auto support.
Per the gapps page only "super and stock gapps zips" contain android auto support.
For some reason twrp won't let me sideload via cpu. Soon as I swipe to start sideload mode it immediately says failed.
Also twrp on this rom won't let me resize the /system/data partion to gather enough space to flash a large gapps package.
523MB of space on the /system after flashing the rom.
How do I get the gapps package you included flashed?
MadMan29729 said:
what is the recommend gapps?
Click to expand...
Click to collapse
Is that you Lane ?
Open gapps pico is what i use mate
Beetle84 said:
Open gapps pico is what i us
Click to expand...
Click to collapse
I ended up installing nano gapps
MadMan29729 said:
what is the recommend gapps?
Click to expand...
Click to collapse
i always use pico
Micro g signature spoofing works.
You rock beetle84!!
Dude, @Beetle84 !! The only reason I got this damned phone was so that I could build an RR for it and you ninjad me!!
No, I'm just kidding. I only have a dual core Pentium with 6 gigs ram atm and would lose my mind tryin to build with it. I friggin love this phone but I was kinda disappointed with the ROMs. Hell, I was about to go back to stock when I saw this, my favorite. And I haven't noticed a bug nor had an unexpected reboot in the 4 or so days since I've been running it and my favorite screen recorder app is working just fine in it as well. It is now the best, and most stable ROM we've got, and ROMs don't get better than RR, IMHO....Check out my homescreen with the only wallpaper I've used since booting my 1st RR like 5 years ago....its from the RR 5.1.1 PitchBlack Theme. Yeah I know. I need an icon pack....I'm on it.....Thanks for my favorite ROM on my favorite phone, Sir. It's outatanding!
And here's that wall, if anyone wants it.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Resurrection Remix ROM
Changelog
Installation
Downloads and useful linksAbout Resurrection Remix ROM
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
[font=Verdana, Arial, Helvetica, sans-serif]Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy![/font]
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters
WIPAs this is the 1° released of CM13 for Quark this ROM may have features that are not full working.
So what I have tested and works, data, call, wifi, GPS, bluetooth, USB OTG and MTP, camera, Music/video app, Xposed, Gapps...
Included Main Features
- Check RR changelog and RR M Quark changelog
-ALL cm13.0 Features
-Check 3# and 4# post for screen shot of the features...
This ROM has safetynet verification Support of course when ROOT is disabled:
I develop a simple app to disable and enable SU at will, after disabling SU the user can pass safety net verification without having to remove SU.
I call it iSu XDA thread Click here
It works today only with CM 13 building SU binary it is present in almost all CM Base ROM.
Warning! There is a small implementation that need to be done to the kernel to have this working 100% the app will work on any device running CM base ROM but may loose ROOT support after a reboot if running without my kernel MOD.
Before install read this...
If you are using Any custom ROM that is not RR android Marshmallow 6.0.x you must do a clean install and fallow " Installation Instruction"
If you are using RR android Marshmallow 6.0.x you can do a dirty flash and fallow "Update Instruction" but if encounter problem do a clean install before report bugs...
Installation Instruction
- Download the latest build
- Download Gapps
- Take a TWRP backup
- Demanding - Clean install/Full wipe (Wipe, Dalvik, Data, Cache and System)
- Flash ROM using latest TWRP recovery
- Flash ROM + Gapps (clean install is demanding to flash ROM + gapps at the same time)
- Reboot to system.
- Enjoy!
Update Instruction
- Download the latest build of Resurrection ROM
- Take a TWRP backup
- Flash ROM using latest TWRP recovery
- Flash Gapps + any other zip you have flash before
- Wipe cache
- Wipe dalvik art
- Reboot to system.
- Enjoy!
Installation Files
Download ROM
Gapp's Recommended
Base on the latest users report the most stable is Banks, Opengapps some times is unstable if prefer Opengapps and have problem try a old version check the old Opengapps link
Banks
Opengapps ARM 6.0 Pico latest
Opengapps ARM 6.0 Old releases
TWRP
[url=https://github.com/ResurrectionRemix/android_vendor_resurrection/blob/marshmallow/CHANGELOG.mkdn]Changelog-RR[/url]RR M Quark changelog
Big thanks to:
XDA developers
CM team
Omni team
Slim rom
@Skrilax_CZ for his hard work on building cm-12/12.1/13.0 to this device
AND OF COURSE TO ALL THE SUPPORTERS, DONATORS AND USERS
Big thanks:
A big thank for those ho help me donating to my work.
XDA:DevDB Information
Resurrection Remix for Quark, ROM for the Motorola Quark XT1225, XT1250 and XT1254 -- Moto Maxx, Moto Turbo and DROID TURBO.
Contributors
baybutcher27
Source Code: https://github.com/ResurrectionRemix
Device Tree
Kernel tree
Vendor tree
Mod Kernel Adiutor tree
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CM, slim.omni and original Remix ROM builds
Version Information
Status: Stable
Created 2016-02-16
Last Updated check Download link
I port this help from my 5.x.x thread some things here may not be the same, I will update this with time
Etc App.
Motorola Apps:
I have included on the ROM the motorola-specific play store props and permissions allowing the user to install Moto apps via Playstore…
here the list:
Be Aware some app will not work
I have not tested Gallery because it conflict with theme app (please use another gallery app like QuickPick It gets integrated by camera app just like the default gallery.
Moto email, it install but doesn't let use the app.
Moto voice, it just not install.
All the rest available Moto app seems to be working.
Be aware I will try to fix this app on the future but i don't give any prediction of when, this is not my priority this is a CyanogemMod base ROM not a Motorola or google , any user can use google and search a way to fix this problem, if any one do let me know I will check and made the change so every one can have all available apps working.
My personal Wallpaper folder, to personalized you ROM it contains all most 1000 pics.
BLOATWARE remove List-Script for all Quark
Check my BLOATWARE remove thread to know what app is safe to remove from custom ROM and or stock, for custo I have made a script.
------------------------------------------------
Help:
Device specific bugs:
Below is more a general help then a device bugs because most users will not ever be notice any of this problem reported, so if encounter any problem try to read it all before reporting, if find any new bug or solution please report.
CM12.1/13 Bugs:
- This may have the same bug of CM12.1 or CM13.0 because this share a lot of source's, (if any one found a CM bug please report so i can check, because I may not keep track of reports there), some bugs of CM I have already fix but they may not be fix on CM, so do not expect to find every bug here, and if you are in doubt if one particular bug exist here, ask me I will check...
USB otg and MTP
USB otg and MTP change on Marshmallow if you are new at this please read before post.
After connect to your pc a notification will appear pull down the notification click on it and chose MTP
USB Otg can be read by any file app, but you must find it... It new location is in the root of the device in /mnt/media_rw
My advice is just to make a desktop shortcut from es file explorer to that folder... this way you can put that on a folder or any place of the desktop of the device and access quickly when is need.
Set selinux to permissive
Selinux is the police of the android it will block any service that is not know or allow (of course if the service/app has super su access it will not occur but some times do)
So by default it comes enable (enforcing), if you have a problem with some app service you may try set it to permissive to test.
Selinux can be change via kernel auditor plugin, or via settings>configurations>Miscellaneous.
Led:
-LPThemer Xposed module if enable the option (Enable Notification text color) under Status bar, the led doesn't work. May exist other modules or app that conflict with led notification...
DPI change
- The device will auto reboot when change the DPI that is not a bug.
Radio image
TWRP Flash zip of Moto SOAK XT1225 Radio images.
CM dev share all stock Radio image on CM thread but those need to be flash via bootloader.
GPS OR RADIO related problem:
Changing the ROM may cause GPS lock problem..
To solve is necessary to erase the radio status, that can be achieved via this zip "Clean_modem_status.zip" flash it via TWRP no wipe is need.
If find any problem related lost signal after, re-try the flash of "Clean_modem_status.zip", if the problem persist, flash latest radio.img version fia fastboot (aka via bootloader)
Code:
mfastboot flash radio radio.img
find the radio.img inside the stock ROM xml.zip, some xml.zip and fastboot for windows can be found here (click here)
Gestures/Ambient display:
- Pulse notifications, Wave and Pick-up, work very well, but is necessary to turn it off and on after 1° installation of RR, go to settings>Gestures> un-check and check to enable.
Random FC
- If encounter any FC, before make a report, try to clear data of the FC app, if that doesn't work, try to uninstall/install the app, and if that doesn't help try a clean install of the ROM if you didn't clean install the last update the ROM.
This is old and doesnot happens anymore on RR but I leave for the purpose of consulting.
On screen Navigation bar:
- After first boot you may see on screen navigation buttons, to remove it Settings>configurations>Buttons> un-check Navigation bar buttons....
Web Whatsapp CM bug Fix by CM dev.
Web Whatsapp works but if you try to loging the first time the image may be interlaced, that doesn't block you from loging, just place the device on the front of the screen at the same height of the QR and it will login.
Is possible to set the DPI to 480 ant this bug will not occur at that DPI.
Video apps Netflix HBO etc.
I'm particularly don't have this bug have teste youtube and netflix is all good, but was reported that this apps may not work for one user, the the fix is change a build.prop line:
persist.hwc.mdpcomp.enable
# GLES doesn't support secure display, to allow google play movies netflix
# and other apps that require a secure display we need to enable this
# but this cause screen fragments and glitch , this is a odd bug may not occur always, so is disabled by default
# to enable this change the false to true on the below line in the build.prop and to prevent screen bugs enable
# Disable HW overlays on developer options to not have glitch on the screen
persist.hwc.mdpcomp.enable=false
Waze motogeogence bug
If you use Waze GPS Social, Map... to not have problems is need to freeze a app before run the Waze app, the app to freeze is, MotGeoFenceSvc app or com.motorola.motogeogencesvc 1.0.1 (it has two names) in setting app you can't disable this app, to do that is need to use a root app like titanium backup or similar, or you can just remove the apk folder using a root browser remove the folder system/app/MotGeoFenceSvc.
------------------------------------------------
Changelog and updates:
Change log
! Changelog is inside the device device... Settings > About a phone > About Ressurrection> Changelog
I will be updating this weekly, will post on the thread warning on it update...
-------------------------------------------------
Bug report with in the most accurate description possible, do not spare words, screens and logs, a bug that i can't understand can't reproduce I can't fix.
Screenshots
On the attachment are the RR basic features, the features may change I will try to keep the pics up to date.
Next post more...
Screenshots
On the attachment more of RR basic features.
Currently in class, but I'm downloading now! Excited! I will be flashing it in a few hours. Can't wait.
I'm excited to test this out. Do I flash over my existing RR ROM or clean install?
Downloading now!
--
Moto Maxx - XT1225
Xposed RR Rom 5.1.1
Help
Thanks for the file!
But I have a problem when installing:
7 error error installing zip file
I would like to help me?
---
Moto Maxx - XT1225
Stock ROM
TWRP 3.0
Epic - Downloading...
I have an XT1250 currently running your 5.1.1 rom. I would install this and let you know of any bugs
Installed...running great. Did a clean install, i hate dirty flashing. I have Google 2 Step Verification, it didnt work on the initial setup but worked after the OS started up. I guess thats kinda irrelevant if you ask me. The interface looks a lot smoother than the 5.1.1 rom but mayb its just me. I would keep using and let you know. Ambient screen works great. LED is still broken tho. Ive learnt to live without lol.
Thanks man!!! u are the best
rafaelduim said:
Thanks for the file!
But I have a problem when installing:
7 error error installing zip file
I would like to help me?
---
Moto Maxx - XT1225
Stock ROM
TWRP 3.0
Click to expand...
Click to collapse
Clean install is demanding check 1# post instalation instructions...
Latiken said:
I'm excited to test this out. Do I flash over my existing RR ROM or clean install?
Click to expand...
Click to collapse
Clean install is demanding check 1# post instalation instructions...
kenennaoyeka said:
I have an XT1250 currently running your 5.1.1 rom. I would install this and let you know of any bugs
Installed...running great. Did a clean install, i hate dirty flashing. I have Google 2 Step Verification, it didnt work on the initial setup but worked after the OS started up. I guess thats kinda irrelevant if you ask me. The interface looks a lot smoother than the 5.1.1 rom but mayb its just me. I would keep using and let you know. Ambient screen works great. LED is still broken tho. Ive learnt to live without lol.
Thanks man!!! u are the best
Click to expand...
Click to collapse
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
My bad. Installing now.
baybutcher27 said:
Clean install is demanding check 1# post instalation instructions...
Clean install is demanding check 1# post instalation instructions...
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
Click to expand...
Click to collapse
Yeah it works..but the LED just stays green and doesnt pulse. and it looks like two LEDS with a divider in the middle. It looks a lil weird lol. Since i cant get it to pulsate, i just disabled it.
baybutcher27 said:
Clean install is demanding check 1# post instalation instructions...
Clean install is demanding check 1# post instalation instructions...
Led doesnot work for you on 5.1.1? too.
Because is just fine on my device, I received a notification and the green led light up...
There is the chace that some app is couse that for you with I don't know...
:good:
Click to expand...
Click to collapse
Thank you!
I managed to install. But my Moto 360 does not connect!
It will be a bug?
I installed it and used it for a few minutes before going back to L.
It's a good first test build but I noticed several bugs and things missing such as the Hardware buttons options.
Latiken said:
I installed it and used it for a few minutes before going back to L.
It's a good first test build but I noticed several bugs and things missing such as the Hardware buttons options.
Click to expand...
Click to collapse
you need to report the bugs if you don't I can fix it.
I have none, and my hardware keys are just were they always be, the ROM can't remove any hardware part.
A lot of things on Marshmallow are in different place, if your search for software keys it is call navigation buttons. :good:
made a USB otg and MTP help
USB otg and MTP change on Marshmallow if you are new at this please read before post.
After connect to your pc a notification will appear pull down the notification click on it and chose MTP
USB Otg can be read by any file app, but you must find it... It new location is in the root of the device in /mnt/media_rw
My advice is just to make a desktop shortcut from es file explorer to that folder... this way you can put that on a folder or any place of the desktop of the device and access quickly when is need.
rafaelduim said:
Thank you!
I managed to install. But my Moto 360 does not connect!
It will be a bug?
Click to expand...
Click to collapse
LG G Watch works fine for me...try to restart the phone and try again
kenennaoyeka said:
LG G Watch works fine for me...try to restart the phone and try again
Click to expand...
Click to collapse
Restarted the moto 360
baybutcher27 said:
you need to report the bugs if you don't I can fix it.
I have none, and my hardware keys are just were they always be, the ROM can't remove any hardware part.
A lot of things on Marshmallow are in different place, if your search for software keys it is call navigation buttons. :good:
Click to expand...
Click to collapse
Only thing I'm noticing that's gone regarding the hardware keys is the ability to change the backlight settings. Other than that, I haven't had any issues so far.
HELLO EVERYONE!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
OLD
BETA 1:
WORKING:
Camera(Front & Back)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS(High Accuracy & Battery Saving)
FM Radio
Basically everything besides bugs.
NOT WORKING:
Tethering(Not working)
GPS(Device only)
Fingerprint Scanner(Not working)
DOWNLOAD:
Beta 1: https://drive.google.com/file/d/0BwCNTUSl2CzjMFRnMmhqTTdyVFk/view?pref=2&pli=1
How to install:
Step-by-step tutorial in 4th post.
For using physical buttons instead of Nav Bar then change this value from 0 to 1 in build.prop.
Code:
qemu.hw.mainkeys=0
If you want root:
See 4th post.
NOTE: YOU HAVE TO FLASH STOCK ROM 20160616, BECAUSE THIS BUILD IS BASED ON THAT. Updates are coming to fix this.
BETA 2:
WORKING:
Camera(Front & Back, better zoom than BETA1)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS(High Accuracy & Battery Saving)
FM Radio
Fingerprint Scanner
Tethering(USB)
Basically everything besides bugs.
NOT WORKING:
Tethering(WIFI)
GPS(Device only)
Audio services force close 2 times.
Only RGB colours for the LED.
DOWNLOAD:
Beta 2: https://mega.nz/#!kxUWHYiL!kdM464NkMB58H1HhAD6fbnz1YOS17CKG1D19xkhszVk
How to install:
Step-by-step tutorial in 4th post.
If you want root:
See 4th post.
STABLE V1(3):
WORKING:
Camera
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS
Fingerprint Scanner
Tethering
Notifications LED(use 3rd party app to set colors)
Basically everything besides bugs.
NOT WORKING:
HDR Force close.
No LED colour change
FM Radio Force close
How to install:
Step-by-step tutorial in 3rd post.
*** BEWARE: If you get bootloop flashing from stock, please install before Beta2 build with clean flash (wipe Dalvik, Cache, Data), then install Stable build with Gapps, clean flash again***
DOWNLOAD:
STABLE 1:
https://docs.google.com/uc?id=0B2n710fxn_CpTjlTMFJfV016UXc&export=download
SuperSU:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
BusyBox:
https://www.androidfilehost.com/?fid=24269982086993145
GAPPS:
http://opengapps.org/ Use arm64 android 6.0
Stable 2:
WORKING:
Camera(besides video recording issues)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS
Fingerprint Scanner
FM Radio
NEW SCREEN
Encrypting
Built-in root
SD Card
Notifications LED
Basically everything besides bugs.
NOT WORKING:
Google Camera fc
HDR gives fc
Video recording not working on Snapchat.
Tethering not working
CM Screen Recorder not working
Audio over bluetooth
HOW TO INSTALL:
1) Flash TWRP in SPFT.
2) Wipe data, dalvik and cache.
3) Install CyanogenMod and GAPPS of your selection.
4) Reboot and voila!
You can flash this from stock
DOWNLOAD:
CyanogenMod:
Google drive
GAPPS:
http://opengapps.org/ Use arm64 android 6.0
Please post bugs etc, in the Bug Reports section and request what questions you want to be answered in the Q/A section aswell.
If you have any questions, please look in the Q/A section before asking.
!!!WE NEED HELP!!!
Would be really great for us if you guys send us logcats with the problems you're having, so we could have something to work with. A nice tutorial to start with.
Credits:
CyanogenMod team
Wuxianlin
Ferhung
Xen0n
Deepflex
Leskal
JonnyXDA
olegsvs
Visi0nary
andyrichardson
Team M.A.D
Device tree: Github
Vendor tree: Github
XDA:DevDB Information
CyanogenMod 13 for UMI SUPER, ROM for all devices (see above for details)
Contributors
joe2k01, Rometheus, Flounderist
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: UMI SUPER WITH TWRP INSTALLED
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2017-01-16
Current Beta Version: 2.6
Beta Release Date: 2016-08-19
Created 2016-08-19
Last Updated 2017-01-16
how to install stable cm 13..Do this after followind Flounderist post on how to install TWRP..Before installing stable 1 you have to install beta2 if you're coming from stock
1)Download the zip package from the first post
Now you can proceed in 4 ways:
a)install only CM
b)install CM and SuperSU
c)install CM, SuperSU and GAPPS
d)install CM, and GAPPS
a1)Copy the zip package to your sdcard
a2)Go into TWRP
a3)Wipe data cache and dalvik
a4)Flash the zip package then reboot
DONE!
b1)Copy the zip package to your sdcard
b2)Go into TWRP
b3)Wipe data cache and dalvik
b4)Flash the CM zip package
b5)Flash SuperSU zip package
b6)Flash BusyBox zip package
DONE!
c1)Copy the zip package to your sdcard
c2)Go into TWRP
c3)Wipe data cache and dalvik
c4)Flash the CM zip package
c5)Flash the GAPPS zip package
c6)Flash SuperSU zip package
c7)Flash BusyBox zip package
DONE!
d1)Copy the zip package to your sdcard
d2)Go into TWRP
d3)Wipe data cache and dalvik
d4)Flash the CM zip package
d5)Flash the GAPPS zip package
DONE!
Changelog
Update of 16/01/2017
Code:
[CENTER]
[B]
Fixed FM Radio
Fixed led notification
Possibly fixed audio over bluetooth
Using new camera libs
Using new screen libs
Using latest stock kernel
[/B]
[/CENTER]
Logcats or help are welcome :highfive:
Installation tutorial
###########
First, you must install proper MTK Driver on your PC.
For Win10 users please use this link:
http://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/
Then download SPFlashtool for Windows.
UMI Super seems working better on ver 5.1604, download it here:
https://mega.nz/#!LRslFIrQ!QIAUzRXMsVGn78Xku0L53CSOEHRMbt8YgjPo1sLlv6s
Use this guide if you want improve your knowledge on SPFT
http://forum.xda-developers.com/showthread.php?t=1982587
Then download TWRP 3.0.2 from here
http://forum.xda-developers.com/showpost.php?p=67288617&postcount=8
Now you are set to flash TWRP on your device.
Extract scatter_file.txt from your firmware folder or download it from here:
https://drive.google.com/open?id=0BzvAF-6zwoYwUWdlZGNzSFNPdGc
- In your device settings menu, go in "Developer option" and allow Debug USB mode
- Remove SD card from device, for security reasons.
- Connect your device using a USB cable
- Once your PC recognized the MTK Driver, disconnect it from PC.
- Switch off your device. It has to be disconnected from PC.
- Start SPFT.
- Set the program in "Download only" mode
- Locate your scatter file on SPFT
- Locate the TWRP .img file clicking on SPFT folder icon. Please rename it "recovery" before locating it.
- Select ONLY the recovery line in SPFT ticking the box on the left. If in doubt follow the SPFT tutorial linked above.
- Click on "Download"
- While switched off, connect your device to the USB cable.
- Press the power button and keep pressed until you get the "Download OK" on your PC screen.
- Flashing time is a few second. If something goes wrong, you will have an error message.
- Disconnect your device from your PC. Press Power + Volume UP to entry in recovery mode.
- As you see the UMI logo, release buttons and it will boot in recovery mode.
- Read carefully the information on first boot in recovery mode.
- Thick on the square and then swipe to made the TWRP permanently installed on your device.
######################################
Now you are ready to flash cm13 on your device.
Download the ROM from link in OP and GAPPS and transfer them on your device.
Reboot your device in recovery mode.
Go in BACKUP section and perform a Nandroid backup.
Do it for security reason
Do it for security reason
Do it for security reason
- Wipe Cache, Dalvik, Data. This will cancel all your account data, but will keep all your files available on device.
- Once wiped as above, tap on "Install"
- Select the ROM, then add Gapps to the zip queue.
- Swipe for flashing
- Wait until flashing process has finished.
- Swipe for cache/dalvik wipe and tap on reboot.
- First reboot is usually quite long, you will see the CM logo flashing for 2/3 mins before update
- Once rebooted, set your account back.
- Enjoy cm13 on your device!
####################################################
If you want, you can flash SuperSu, for root permissions.
Here is the dowload link:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
Please report any error in this guide, and any error in flashing, using etc.
A known issue is a "CM Audio Service Stopped working" on boot. It is a minor bug, it will be fixed a.s.a.p.
xPosed seems not working, please report any fix, if available, and share with us
A big THANK YOU to:
@Deepflex for the original Elephone p9000 cm ROM, he did the hard work, he deserves all the credits.
@sandeep.sethi for his porting guide and for all the support.
@megthebest and @jemmini for TWRP and all the support.
@Aaahh for the sarcasm and the information.
Nice (even though I don't have the phone yet)!
Sent from my JY-S3 using Tapatalk
Great new!!
Enviado desde mi UMI_SUPER mediante Tapatalk
I get an bootloop. With and without gapps.
DanielTabea2202 said:
I get an bootloop. With and without gapps.
Click to expand...
Click to collapse
Me too
I also get a bootloop.
[email protected] said:
I also get a bootloop.
Click to expand...
Click to collapse
I should note, that you should before flash stock rom 20160616, since this build is based on that. Updates are coming.
Can't use until fingerprint scanner is working as I use it every day to activate my screen rather than wear out the power button. Will it ever be functional or is that something that will never work due to lack of drivers?
Seems an update with it working is coming! By the way, the Gapps we should take are 6.0 arm64, correct?
Sent from my JY-S3 using Tapatalk
goja said:
Seems an update with it working is coming! By the way, the Gapps we should take are 6.0 arm64, correct?
Click to expand...
Click to collapse
We have arm64 indeed.
kestrelv2 said:
Can't use until fingerprint scanner is working as I use it every day to activate my screen rather than wear out the power button. Will it ever be functional or is that something that will never work due to lack of drivers?
Click to expand...
Click to collapse
Joe got fingerprint scanner to work.
Gud work my friend
Yeah I always got you with that sarcasm don't you worry
Lol, but yeah I'm open to questions and info
Only tethering remains! Which bugs were found so far?
Sent from my JY-S3 using Tapatalk
Nice rom, but I always get on boot CM audio service has stopped.
Edit: can't find the option to enable the led pulse (harelequin or something like that) .
Fantastic work, thanks.
Just a small thing, article link to OpenGapps needs a fix (two p's in gapps!)
Thank you very much for your efforts in improving UMI Super!
It makes a long time I don't deal with ROM flashing and such, but I'm really looking forward to do it.
Are there any improvements to the camera quality? Or maybe that is something more related to the firmware itself and can only be fixed by UMI engineers or Mediatek's? (Sorry if the question is 'absurd' from the technical point of view).
Thank you in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Make sure you have the REQUIRED TWRP installed from here.
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
IMPORTANT FIRST STEP BEFORE FLASHING ROM: IN TWRP Recovery go to Advanced > Terminal and type in setprop ro.boot.vbmeta.avb_version 1.1
You can also just remove the comptability.zip inside the ROM package instead of doing the above command.
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Boot image created by Ivan or make your own here(Optional)
First boot may take up to 10 minutes.
ROM Download (S10E)
ROM Download (S10)
ROM Download (S10+)
GApps
Resurrection Remix Source
Kernel Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Nice to see a new build loved your roms on my old phones. ?
OMG! I just switch from RR 6.2.1 on S9 to a S10 and roms are so bad compared to RR. I hope it will rocks as always
One UI roms are too heavy, cpu is always going crazy and smartphone is hot as hell >_<.
I miss the lack of a led notification on s10, so i'm using LED ME KNOW in Always on Display.. will it works on this rom ? (in EvoX wasn't)
Magisk root / EdXposed will works too ? How is going with the notch hole?
In meantinme, I'm downloading all files needed
In advance,
Thx for the job!
EDIT : installed without this command : "IMPORTANT FIRST STEP BEFORE FLASHING ROM: IN TWRP Recovery go to Advanced > Terminal and type in setprop ro.boot.vbmeta.avb_version 1.1 " twrp 3.3 no setprop function. twrp 3.4 do not work on my s10..
Hope it will be not a problem flashing like that.
Installing things...
Chooo
PS : I've sent a little for a beer
does it support encryption?
Ninja_Gundam said:
OMG! I just switch from RR 6.2.1 on S9 to a S10 and roms are so bad compared to RR. I hope it will rocks as always
One UI roms are too heavy, cpu is always going crazy and smartphone is hot as hell >_<.
I miss the lack of a led notification on s10, so i'm using LED ME KNOW in Always on Display.. will it works on this rom ? (in EvoX wasn't)
Magisk root / EdXposed will works too ? How is going with the notch hole?
In meantinme, I'm downloading all files needed
In advance,
Thx for the job!
EDIT : installed without this command : "IMPORTANT FIRST STEP BEFORE FLASHING ROM: IN TWRP Recovery go to Advanced > Terminal and type in setprop ro.boot.vbmeta.avb_version 1.1 " twrp 3.3 no setprop function. twrp 3.4 do not work on my s10..
Hope it will be not a problem flashing like that.
Installing things...
Chooo
PS : I've sent a little for a beer
Click to expand...
Click to collapse
Getting a invalid zip format error in TWRP .
Ninja_Gundam said:
OMG! I just switch from RR 6.2.1 on S9 to a S10 and roms are so bad compared to RR. I hope it will rocks as always
One UI roms are too heavy, cpu is always going crazy and smartphone is hot as hell >_<.
I miss the lack of a led notification on s10, so i'm using LED ME KNOW in Always on Display.. will it works on this rom ? (in EvoX wasn't)
Magisk root / EdXposed will works too ? How is going with the notch hole?
In meantinme, I'm downloading all files needed
In advance,
Thx for the job!
EDIT : installed without this command : "IMPORTANT FIRST STEP BEFORE FLASHING ROM: IN TWRP Recovery go to Advanced > Terminal and type in setprop ro.boot.vbmeta.avb_version 1.1 " twrp 3.3 no setprop function. twrp 3.4 do not work on my s10..
Hope it will be not a problem flashing like that.
Installing things...
Chooo
PS : I've sent a little for a beer
Click to expand...
Click to collapse
Was actually wondering that would happen if you don't use the command.... And what it actually does...
Want to try this ROM later....
---------- Post added at 09:33 AM ---------- Previous post was at 09:22 AM ----------
^^rac said:
Was actually wondering that would happen if you don't use the command.... And what it actually does...
Want to try this ROM later....
Click to expand...
Click to collapse
Also used to be a huge fan of RR ROMs... So glad it's back on S10E thank you!
FreeRunner2017 said:
Getting a invalid zip format error in TWRP .
Click to expand...
Click to collapse
Did you run the important setprop command?
^^rac said:
Was actually wondering that would happen if you don't use the command.... And what it actually does...
Want to try this ROM later....
---------- Post added at 09:33 AM ---------- Previous post was at 09:22 AM ----------
Also used to be a huge fan of RR ROMs... So glad it's back on S10E thank you!
Click to expand...
Click to collapse
You need to run this so rom can install at all. You can alternatively remove compatibility.zip within the ROM zip itself.
Thanks, im in, and testing. Coming from Havoc ROM which is also pretty good
I did not have to run the command, installed straight away on Modpunk TWRP.
Will run it for the weekend and provide some feedback, thank you very much, so awesome seeing another LOS rom!
^^rac said:
Thanks, im in, and testing. Coming from Havoc ROM which is also pretty good
I did not have to run the command, installed straight away on Modpunk TWRP.
Will run it for the weekend and provide some feedback, thank you very much, so awesome seeing another LOS rom!
Click to expand...
Click to collapse
By any chance did you have S10( G973)
turbolukex5 said:
By any chance did you have S10( G973)
Click to expand...
Click to collapse
Hi There. No, running on S10e...
^^rac said:
Hi There. No, running on S10e...
Click to expand...
Click to collapse
Ah it might be that modpunk twrp already has the fix that Ian's twrp doesn't have
turbolukex5 said:
Did you run the important setprop command?
Click to expand...
Click to collapse
Yes
Mine got well without command on S10
Btw.. firsts impressions are very good ! Finally a speedy fluid rom and cellphone is cold.. with hades was a real hellfire >_<;
Installed all i had on s9 RR wanna see how it goes.. battery% need to be calibrated I'll let go in weekend time.
I've tried 90Hz refresh but no evident change so put back to 60Hz.
Under display, I think there is a little bug on slide Minimal brightness level.. even on little put like 70% on light.
Under RR tools -> interface -> ambient options -> Display ambient if u enable Ambient display it actually is off (yesterday i've disabled it and it was on on screen) seem a bit buggy maybe in combo with others settings.
Is there a way to save RR tools settings ? Will be nice feature if implemented.
Had sense on this rom keep using Amplify\Greenify ?
If anyone used to downclock, which app u suggest on this RR?
I'm still figuring out how to have notification as I like..
I dont want Always on screen.. I just want a ledalike notification on screen of the color of the app.
anyone have this configuration\can help ?
Sorry for all question but this rom really my fav !
Chooo
How to implement a magnetic cover in this resurrection firmware?
This rom is good, but i went back to Havoc, seems just slightly more polished.
But both are very good, thank you for uploading, good stuff.
Mixed heavy usage, installing apps...testing etc.. with dowclock to 10xx...... For now battery is running 27h and 8 of screen.. not bad to me (neither a reboot , temp around 32°C.. i think ok with 35°C outside)
Still figuring out about some combo for notifications light..gcam to work etc.. later heavy optizimizing on kernel\services,debloating loggers etc
but for now for my use I'm pretty satisfated
Chooo
Anyone having issues with multi touch being just up to 2 points only?
Eidluci said:
Anyone having issues with multi touch being just up to 2 points only?
Click to expand...
Click to collapse
I can test if u tell me how...
btw im having a strange bug now with android wear...
Already tried to clean cache\data of google, play services, wear os.. reinstalled wear os even after reboot... nothing.
Any ideas ? With others custom rom was working.
Chooo
Ninja_Gundam said:
I can test if u tell me how...
btw im having a strange bug now with android wear...
Already tried to clean cache\data of google, play services, wear os.. reinstalled wear os even after reboot... nothing.
Any ideas ? With others custom rom was working.
Chooo
Click to expand...
Click to collapse
Try downloading a touch testing app and see that when adding a third finger on the screen it cancels one then just moves to the third finger instead of showing 3 in total
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (N/A)
gapps (Included with build due to specific requirements)
Magisk 24.0 or newer for root (after first boot) - (Download from here)
First time installation:
these steps assume you already have an unlocked bootloader
Install fastboot on your PC if not installed already.
Place downloaded rom zip in the same folder as the fastboot.exe
Open command prompt inside that directory or use the change directory command to change after launching command prompt
Reboot Phone to bootloader (adb,button combo, whichever way you like to do it)
Once at bootloader screen type the following into command prompt exactly as shown minus the quotes, replacing <filename.zip> with the actual filename of the downloaded rom including the .zip extension: "fastboot -w update <filename.zip>" THIS WILL WIPE YOUR DATA PARTITION!!!!
Now just sit back and wait, the device will reboot a couple times during the process. just leave it be and do not unplug it from the PC until it has booted to the Setup Wizard Welcome screen.
Update installation:
Place newly downloaded rom zip inside same folder as fastboot.exe
Reboot device to bootloader
Open command prompt inside same directory as fastboot.exe and rom zip
type "fastboot update <filename.zip>" (without the quotes). Your device will reboot a couple times throughout the flashing process. This will update your device with specified rom.zip without wiping your userdata. But FYI there have been times where a new bug was discovered that was not actually a bug and was fixed with a fresh installation after wiping userdata. It's just the nature of the game with flashing developing ROMs
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://android.googlesource.com/device/google/raviole-kernel
Download:
ROM CrDroid v8.2 UNOFFICIALraven fastboot flashable zip w/GAPPS
Changelog: CrDroid v8.2 raven changelog
Known issues:
In Settings Submenu for the Ambient Music/Now playing feature it always says there is no internet connection when you go to those settings menus but the feature still works as it should. Working to resolve as we speak.
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Donate specifically to myself the current device maintainer for raven to maybe buy me a coffee or something Never expected, but much appreciated!
Reserved
Reserved
Awesome, man. Also, one could say this about these builds: "a build is never late. Nor is it early. It arrives precisely when it intends to"
Congrats ! Finally a custom build for P6P. Great work @albinoman887
Hola
Thanks for an awesome release. So many of us are very grateful for time and effort that you put into this.
Cheers.
albinoman887 said:
This is an UNOFFICIAL build.of crDroid v8.2 based on Android 12 for the Google Pixel 6 Pro.. I did NOT create this ROM, it is an Open Source project by the community for the community and has many many contributors , some from this very thread!. thanks to all who have contributed to CyanogenMod/LineageOS/crDroid and all other Custom ROM projects over the years.
Code:
[B]IMPORTANT[/B]
* Builds are done when they are done, and not a second sooner. Please no build begging.
* Do NOT be rude.
* If you don't get a reply from me in a timely manner about your bug, sorry i do this in my spare time
* Respect all users
* If I see a NOOB question and I don't feel like replying, I WONT.
Built from latest crDroid Android 12 source
All Hardware features (calls/Wifi/Bluetooth etc) all working!
All the usual crDroid specific customization options, including but not limited to - Custom Monet theme settings, Navigation Bar Customization, Many Fonts, Custom Icons and other UI tweaks as well as the following additional Pixel Specific features unofficially added
Quick-Tap
Ambient Music - Now Playing
Pixel Launcher
Smartspace
Less padding on Gboard portrait mode as the keys seem unusually narrow to me otherwise (even on stock)
Android Intelligence Service related things in Settings report "No Internet" when indeed there is . examples are the Now Playing Settings page in Sound. When enabled it will say No Internet below the toggle switch but the feature still works. I narrowed it down to a priv-app permissions issue. Seems to only be cosmetic though so don't worry.
PAY ATTENTION!! DIFFERENT THEN MOST DEVICES! CURRENTLY TWRP DOESNT SUPPORT OUR DEVICE SO FASTBOOT MUST BE USED INSTEAD! GAPPS IS ALSO INCLUDED IN THE BUILD DUE TO SAME LACK OF TWRP!
(if you are comfortable with fastboot just run the following commands from fastboot if you are unsure of the procedure please read on IT IS DIFFERENT THEN TWRP!
Code:
(boot to bootloader)
fastboot -w
fastboot update crDroid-v8.2<builddate>-UNOFFICIAL-raven_fastboot.zip
Boot to bootloader
from terminal/command prompt: fastboot reboot bootloader
if you are coming from a different rom wipe userdata by typing fastboot -w
now type fastboot update filename.zip where filename is the name of the downloaded zip. (e.g, crDroid-v8.2<builddate>-UNOFFICIAL-raven_fastboot.zip)
Any and all users in this thread who contributed or will contribute to making this ROM as stable as possible
LineageOS Devs
crdroid Devs
@delet_thiskthx
Me
Not expected by any means but always brings a smile to my face when I see it, If anyone wants to Paypal me a couple bucks my way it would really help cuver all the coffee and smokes i go through debugging stuff haha
Thanks and happy flashing!
Mar 3
* Initial XDA Release (no changes)
Mar 1
* Initial internal test Release
* Fixed VoLTE not being enabled with some carriers
* Added Quick-Tap function from Stock
* Added Ambient Music - Now Playing function from Stock
* Fixed HvmSVManager from crashing
* Re-enabled background blur
* Fixed color space corruption with some wallpapers when exiting AOD mode
[ROM]: crDroidAndroid-12.0-20220301-raven-v8.2_fastboot.zip
Gapps: TEMP INCLUDED WITH ROM IMG UNTIL ITS FLASHABLE VIA CUSTOM RECOVERY
[Download Archive]: All ROMs
https://github.com/crdroidandroid
https://github.com/Albinoman887/android_device_google_gs101
https://github.com/Albinoman887/android_device_google_raviole
https://gitlab.com/Albinoman887/vendor_google_raven
XDA:DevDB Information
crDroid v8.2| Android 12 for Google Pixel 6 Pro (raven), ROM for the Google Pixel 6 Pro
Contributors
albinoman887
Source Code: http://github.com/Albinoman887
ROM OS Version: Android 12
ROM Firmware Required: Latest BL and MODEM are recommended
Based On: crDroid
Click to expand...
Click to collapse
Great news! Thanks for the P6P custom Rom @albinoman887 and crew.
Thanks dev and team, it's running great, I had no issues with installation.....let the game begin.
Thanks again. Donation sent.
@albinoman887 nice to see someone step up and start pumping out some builds! I was starting to worry that I'd have to blow the cobwebs off my dinosaur and come out of inactive status. Thanks for your efforts.
I love this ROM. great work. I'm getting everything set up now. I have one question tho. I use smart launcher but can't get material you icons to apply and don't see the theme icons option in wallpaper/style. Am I doing something wrong or did I miss something? Thanks in advance
AlphaKoi said:
I love this ROM. great work. I'm getting everything set up now. I have one question tho. I use smart launcher but can't get material you icons to apply and don't see the theme icons option in wallpaper/style. Am I doing something wrong or did I miss something? Thanks in advance
Click to expand...
Click to collapse
I have had this issue before on stock. The full list of options didn't show up until enough time passed and a phone reboot after the wipe and re-flash. That's what happened to me, so perhaps you're facing the same, temporary issue.
Can't wait to flash this after work. My main issue with this phone is using stock navigation bar. It's so finicky with the taps it sometimes goes 3-4 times back. I hope this ROM has fixed the sensitivity on the navigation bar. Like I said, can't wait! Thanks for the hard work OP.
chopt51 said:
Can't wait to flash this after work. My main issue with this phone is using stock navigation bar. It's so finicky with the taps it sometimes goes 3-4 times back. I hope this ROM has fixed the sensitivity on the navigation bar. Like I said, can't wait! Thanks for the hard work OP.
Click to expand...
Click to collapse
Its a great ROM and to me everything is smooth like butter. Flash and enjoy
AlphaKoi said:
Its a great ROM and to me everything is smooth like butter. Flash and enjoy
Click to expand...
Click to collapse
Has the stock navigation bar received any fixes? If you softly tap on the back button does it fly back 4-5 pages?
Joe) how well does this rom work on oneplus 6t?
chopt51 said:
Has the stock navigation bar received any fixes? If you softly tap on the back button does it fly back 4-5 pages?
Click to expand...
Click to collapse
Sadly I couldn't say. I don't use stock navigation. I use gestures. That much is very smooth. I would assume it's the same
AlphaKoi said:
Sadly I couldn't say. I don't use stock navigation. I use gestures. That much is very smooth. I would assume it's the same
Click to expand...
Click to collapse
Anyway you could disable gestures in the settings, enable navigation bar. Then lightly tap the back button and see if it is overly sensitive resulting in multiple back taps? Thanks in advance. I'm at work. Will test tonight anyway.
chopt51 said:
Anyway you could disable gestures in the settings, enable navigation bar. Then lightly tap the back button and see if it is overly sensitive resulting in multiple back taps? Thanks in advance. I'm at work. Will test tonight anyway.
Click to expand...
Click to collapse
I did it. Seems smooth on my end. No lag. No additional keystrokes. Nothing janky. I hope you love the ROM like I do
AlphaKoi said:
I did it. Seems smooth on my end. No lag. No additional keystrokes. Nothing janky. I hope you love the ROM like I do
Click to expand...
Click to collapse
you are right. I flashed the ROM and the navigation bar is fixed for me. I appreciate the help in testing. The ROM is great!
Edit: spoke too soon. Problem still here. Must be my device.
albinoman887 said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (N/A)
gapps (Included with build due to specific requirements)
Magisk 24.0 or newer for root (after first boot) - (Download from here)
First time installation:
these steps assume you already have an unlocked bootloader
Install fastboot on your PC if not installed already.
Place downloaded rom zip in the same folder as the fastboot.exe
Open command prompt inside that directory or use the change directory command to change after launching command prompt
Reboot Phone to bootloader (adb,button combo, whichever way you like to do it)
Once at bootloader screen type the following into command prompt exactly as shown minus the quotes, replacing <filename.zip> with the actual filename of the downloaded rom including the .zip extension: "fastboot -w update <filename.zip>" THIS WILL WIPE YOUR DATA PARTITION!!!!
Now just sit back and wait, the device will reboot a couple times during the process. just leave it be and do not unplug it from the PC until it has booted to the Setup Wizard Welcome screen.
Update installation:
Place newly downloaded rom zip inside same folder as fastboot.exe
Reboot device to bootloader
Open command prompt inside same directory as fastboot.exe and rom zip
type "fastboot update <filename.zip>" (without the quotes). Your device will reboot a couple times throughout the flashing process. This will update your device with specified rom.zip without wiping your userdata. But FYI there have been times where a new bug was discovered that was not actually a bug and was fixed with a fresh installation after wiping userdata. It's just the nature of the game with flashing developing ROMs
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://android.googlesource.com/device/google/raviole-kernel
Download:
ROM CrDroid v8.2 UNOFFICIALraven fastboot flashable zip w/GAPPS
Changelog: CrDroid v8.2 raven changelog
Known issues:
In Settings Submenu for the Ambient Music/Now playing feature it always says there is no internet connection when you go to those settings menus but the feature still works as it should. Working to resolve as we speak.
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
Donate specifically to myself the current device maintainer for raven to maybe buy me a coffee or something Never expected, but much appreciated!
Click to expand...
Click to collapse
OK. I need a video tutorial, many thanks?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
awakenOS for Xiaomi Pad 5 [Nabu]
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void. Or...Valid? Probably?
*
* Project Awaken and its maintainers are not responsible for bricked devices,
* dead SD cards, data loss, thermonuclear war, or economic crisis caused by
* Awaken OS. YOU are choosing to make these modifications, and if you
* point your finger at me for messing up your device, I will laugh at you.
*/
Born different, now awaken.
Awaken OS brings consistent, fluent and smooth experience with all your must-have customizations, for you, for the community, for everyone.
- Project Awaken Team -
Saikiran [Founder & Lead Developer]
Ninad Patil [Lead Developer]
Mukul [Developer]
Hugwalk [Lead Designer]
Jagadish [Designer]
Glitch [Designer]
Find us on Telegram! @AwakenOSNews
Display
Fonts, Icon shape & Icon pack customizations
Gestures
Advance reboot menu
Double tap to sleep and wake
Navbar customizations
Three finger screenshot
Toggle torch when screen off
Lockscreen
Notification
Pixel Features
Smartspace
Quick Settings
Brightness slider customizations
Security
Sounds
Cycle through ringer modes
Increasing ring volume
In-call vibration
Link ring and notification volumes
Statusbar
4G instead of LTE
Small mobile type icon
Stylus and keyboard aren't working. [Flash permissiver to fix]
First Time Install / Clean Flash
1. Reboot to bootloader (fastboot)
2. Connect your phone to PC
3. fastboot flash boot boot.img
4. fastboot flash vendor_boot vendor_boot.img
5. fastboot reboot recovery
6. adb shell recovery --wipe_data
7. adb reboot sideload
8. adb sideload awaken*.zip(or drag down the rom zip to cmd)
9. adb sideload firmware*.zip (only if there's a firmware update)
10. Type adb reboot once the installation is completed. #beAwakened
11. Reboot to System and #beAwakened
Update / Dirty Flash
1. Download proper flashable ZIP for your device
2. Reboot to Recovery
3. adb reboot sideload
4. adb sideload awaken*.zip(or drag down the rom zip to cmd)
5. adb sideload firmware*.zip (only if there's a firmware update)
6. Reboot to System by typing adb sideload and #beAwakened
Download Here / Official Announcement / Official Community
Kernel Source / Source Code
ROM OS Version: Android 13
ROM Kernel: Linux 4.14.x
ROM Firmware Required: Unlocked bootloader, Latest firmware, Above mentioned recovery
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 3.7
Stable Release Date: 2023-05-11
Created: 2023-03-19
Last Updated: 2023-05-11
Reserved
Is it stable for daily use? And pls add screenshot
Great
Waiting for stylus fix
Waiting for the stylus support. Thanks!
Thanks!
Will this stay official. and have a Long Life time?
edit : Full OTA supported?
Works great, only had it running for 2 days, but love it so far.
Pro:
- super smooth, had some lag on MIUI und even Arrow in some of my apps, all good here
- WiFi works fine, had some problems with that before
- Netflix reports widevine L1
- saftynet passes, even banking app likes it (no root though)
- sound: well equalizer in YouTube music work, which is enough for me
Cons
- had to setup face recognition, cancel only brought me back to Google setup, which then wants to setup face unlock again
Big thanks to devs!
Hi, I really like the rom, everything works fine for now but I noticed two shortcomings,
AwakenOS customizations and features: the rom is missing various features, such as floating windows and some customizations (i think)
Audio: the audio quality is a bit poor and low, i would recommend the developer to add an app like dolby atmos or something else for enhancing the audio quality.
Fast charge: the tab doesnt charge at 20-30w
This is my feedback, I'm not forcing
anyone to follow my advice, but I think this rom has a lot of potential on this device.
Found a lil bug: the battery widget doesnt work, it shows an infinite “loading” screen.
Sending images through Facebook messenger is not possible
Keyvannn said:
Great
Waiting for stylus fix
Click to expand...
Click to collapse
Should work. He says flash permessiver to fix. You just need root. But is this a Magisk Module?
TheEmperor27 said:
Sending images through Facebook messenger is not possible
Click to expand...
Click to collapse
Hello. Did you install this ROM? Everytime I try to do this command: adb sideload AwakenOS.zip I get xfer 0 and it immediately stops. Maybe you can help me...
Edit: I've accidentally downloaded the version for another device. I thought it's the correct one because the download link automatically redirects you to the file. So to all others: Pay attention which File you are downloading.
miracast isnt working how to fix
I hope this helps anybody: The ROM seems to be the best one for this device so far for me. The developer says the Pen doesn't work but it does work for me and i don't know why. The keyboard actually didn't work, even after flashing the Permessive File in Magisk which was attached. It only caused a bootloop. For anyone who wants to use the Xiaomi Keyboard anyway: There is still a way to do that. You just need to have your device rooted. I did it easily via Sideload. Just my attached file. It worked for me after rebooting twice.
And maybe somebody wans to know... I use those Magisk Modules which are very important for me because they add some essential feautures. They are attached.
1. BlockAds: Removes many ads systemwide.
2. Magisk Bootloop Protector: Turns off every Magisk Module when a Bootloop which is caused by Magisk is detected. The attached ones are safe but I recommend using it if you install other Magisk Modules.
3. Magisk Xiaomi Keyboard: Enables the Xiaomi Keyboard in any other ROM than MIUI.
4. Mi Sound: Enables MIUI Dolby Atmos for better Sound Quality and adds the equalizer.
5. Miui Core: You need it to use the Mi Sound Magisk Module
6. Xperia Music: Adds the Xperia Music Player which is usefull for me because there isn't any integrated Music Player in this ROM
Hope it helps anybody
IMPORTANT EDIT: It seems like MIUI Core and Sound Module doesn't work with Magisk Delta and somebody has bricked his device by using the Modules! I can only confirm that they work for me and I even attached some Screenshots in another comment so you can see that they work.
YOU ARE CHOOSING TO USE THESE MODULES AND I AM NOT RESPONSIBLE FOR ANY DEVICE BRICKS!
EDIT 2: Now someone else didn't got it working until trying to use Magisk Delta. I'm was using Magisk 25.2 and now 26.1 and both are working. It means you need to look yourself what works for you and what not. Anyway you may need more then one try because you may get stuck in a bootloop and need to reflash your device.
nabulsi08 said:
I hope this helps anybody: The ROM seems to be the best one for this device so far for me. The developer says the Pen doesn't work but it does work for me and i don't know why. The keyboard actually didn't work, even after flashing the Permessive File in Magisk which was attached. It only caused a bootloop. For anyone who wants to use the Xiaomi Keyboard anyway: There is still a way to do that. You just need to have your device rooted. I did it easily via Sideload. Just my attached file. It worked for me after rebooting twice.
Click to expand...
Click to collapse
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
UniNick said:
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
Click to expand...
Click to collapse
Sure, give me a moment
UniNick said:
Could you please check out the screen mirror / cast function, if you can duplicate the tablet screen onto a smart tv?
Click to expand...
Click to collapse
Working. It's just a bit slow like normal but perfect for movies, documents and things like that.
hello987vn said:
miracast isnt working how to fix
Click to expand...
Click to collapse
Sorry, I don't use this app and cannot help you. But the integrated Screen Cast works so maybe you try that.
nabulsi08 said:
Sorry, I don't use this app and cannot help you. But the integrated Screen Cast works so maybe you try that.
Click to expand...
Click to collapse
i used the integrated cast it doesnt display my tv
hello987vn said:
i used the integrated cast it doesnt display my tv
Click to expand...
Click to collapse
Do you have a Smart TV (Android TV)? Just go to the Main Menu and it should work. It has listed my TV immediately.