Develop Bugs

couldn't boot to twrp recovery after flashing cm14

hi'
i have flashed cm14 nightly with aroma (gapps) on cm13 on my oneplus 3
now i couldn't go neither to recovery mode nor to current cm 14 rom to change my rom
i am out of ideas i tried in every possible way to my knowledge pleasee help me ........................

Flash the modified twrp 3.0.2-22 via fastboot.

Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img

I had the same problem. Flashing modified twrp worked for me, thanks! But now if I to flash stock recovery (to install otas), I can't boot to recovery. E: oxygenos otas can be installed with twrp, so no problem anymore

plz send me the link of modified twrp
i coudnt find it on google properly plz

Try the link given by Demian3112. It works

THQ thq soon much.. Its working
Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Yes its working
Thank q very much

THQ thq soon much.. Its working
AJay27 said:
Try the link given by Demian3112. It works
Click to expand...
Click to collapse
THQ for ur valuable suggestion
My killer is back

Demian3112 said:
Get modified twrp here i asume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
Hii,
Still the problem remains same I will explain in detail
I am back to cm14.1 when I flashed twrp from the above link
When I tried to flash some other ROMs they are flashed but screen goes blank after oneplus boot animation,
If I flash 14.1 ROM it is working fine
From cmd non of the recovery where flashed only the above is working
Plz help me
I want to go back to stock soon

It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.

sanjumalik720 said:
It's because of the system partition rewriting issue. People in the cm and other communities are already working on it. Basically the boot partitions get rewritten when we install the cm 14.1 . It happens to some variants while others works fine. Just the issue because of not enough testing. Will be sorted out within time.
What you can do is. Use flashify app or fastboot from your pc and flash your twrp back after installing and booting into the cm 14.1. You can use any twrp no modified versions needed as far as it is supported by your device model. Ciao. Hit thanks if i helped.
Click to expand...
Click to collapse
ohhh
then what is the solution ?????

Thank you very much
Demian3112 said:
Get modified twrp here i assume that you know how to flash it?
Boot in fastboot > fastboot flash recovery Recovery filename.img
Click to expand...
Click to collapse
I had the same problem as OP, got stuck with the CM 14 and did not like it (to early, to many bugs)
Wanted to go back to CM 13 but was unable to get into TWRP, and unable to flash CM13 back. Tried with fastboot and adb sideload, nothing worked.
The modified TWRP let me do i full wipe of the phone, (wiped Data, Dalik/ART, and system.) then copied the CM13 Stable release from here onto the phone, together with Gapps, and now everything is back to normal.
Again thank you, and thanks XDA! Somehow you always manage to save my ass after i messed with my device

Balaji Dasari said:
ohhh
then what is the solution ?????
Click to expand...
Click to collapse
Just flash the twrp image file again. The one you used before. Just flash it again. The same way you did back then.

Do i need to format data from twrp before flashing magisk in miui ?

I'm on 9.5.13 stable and i'm waiting for unlocking my bootloader, i heared that miui by default encrypt the phone, and after flashing magisk to get root, it will not boot unless i do format data from twrp to decrypt it, it that true or i'm missing something ?
I'm just want to get root on current build 9.5.13 to get some mods and enable camera2api without loosing all stock camera features.
Thanks in advance

Not true!
What your confusing things with, is when you flash TWRP, you need to flash lazyflasher to allow the device to boot. Or use a TWRP that includes a script to do so.
You can run the device encrypted if you want, but formatting data will let it run decrypted if magisk is flashed before booting rom.
Unlocking your bootloader will wipe data, so backup beforehand!

corkiejp said:
Not true!
What your confusing things with, is when you flash TWRP, you need to flash lazyflasher to allow the device to boot. Or use a TWRP that includes a script to do so.
You can run the device encrypted if you want, but formatting data will let it run decrypted if magisk is flashed before booting rom.
Unlocking your bootloader will wipe data, so backup beforehand!
Click to expand...
Click to collapse
Thanks for your help, unlocked my bootloader yesterday and flashed twrp, lazyflasher and magisk and everything is ok, no issues with booting, thanks again.

corkiejp said:
Not true!
What your confusing things with, is when you flash TWRP, you need to flash lazyflasher to allow the device to boot. Or use a TWRP that includes a script to do so.
You can run the device encrypted if you want, but formatting data will let it run decrypted if magisk is flashed before booting rom.
Unlocking your bootloader will wipe data, so backup beforehand!
Click to expand...
Click to collapse
I am new to Custom ROM installer. I had unlocked refmi note 5 pro using miui tool and flashed twrp recovery. But I could nt flash lazyflasher through twrp.
Now my mobile works fine in miui 10 . But I couldn't root it. I need to flash resurrection remix ROM .
Please help me

@sathishob you don't need root to flash a custom rom. Check the rom thread you want to flash for instructions and further assistance.

corkiejp said:
@sathishob you don't need root to flash a custom rom. Check the rom thread you want to flash for instructions and further assistance.
Click to expand...
Click to collapse
@corkiejpThank you for the support corkiejp... Successfully i flashed a custom ROM (Resurrection remix 7 ) but I couldn't use the banking apps and camera doesn't open . I tried to solve it without root. But I couldn't . So I installed magisik now everything works fine . ( I couldn't install magisik easily. It took several times to success. Most probably it says error 1 . Installed magisik uninstall then every thing went smoothly.)
Installing Aosp extended ROM I fixed camera issue and by flashing magisik banking apps are working
Thanks a lot for your valuable reply...

Hello guys
I had unlocked my whyred and flashed twrp recovery by fastboot. First time it went smoothly . after reboot phone went to stock mi recovery . I searched and found that to resolve this i have to install lazyflasher zip file . so i tried to flash that file through twrp. I could nt flash that file because it showed some error message . some how i tried two or more times to flash it with some other lazyflasher files . It did nothing . Then i installed twrp image file from twrp recovery suddenly issue was solved . properly phone booted on twrp recovery .
Then i tried to flash magisik but i couldnt flash it because it says error 1 as a reason . I tried some more ways to flash it but i can't find any solution . from the help of corkiejp i flashed the resurrection remix 7 successfully without flashing magisik. But my camera was not worked and banking apps are not worked .
So i flashed the aosp extended pie rom and the camera worked fine . but i could nt use banking apps. I searched for a way and landed on flashing magisik manager . again the error 1 prevented me to flash magisik . I flashed magisik uninstall zip and everything went smoothly.
Now my phone was properly rooted and working fine.
But my question is if until now i could nt flash lazy flashers prooerlybon my phone . is this make any harm to my phone ? Please help me
Thanks in advance ...

Twrp problem

Hi My twrp shows all files 0 mb. I tried to mouth but ask password. but i dont have password so I don't know this password. I use my phone still with miui9 latest version. when i enter twrp asks password again. what can i do

jomolocco said:
Hi My twrp shows all files 0 mb. I tried to mouth but ask password. but i dont have password so I don't know this password. I use my phone still with miui9 latest version. when i enter twrp asks password again. what can i do
Click to expand...
Click to collapse
twrp has a bug and cant decrypt your data. before using twrp please format your userdata partition in fastboot by using this command: fastboot format userdata

omer919 said:
twrp has a bug and cant decrypt your data. before using twrp please format your userdata partition in fastboot by using this command: fastboot format userdata
Click to expand...
Click to collapse
I have the same issue, it asks me for a password when accessing TWRP because it couldn't decrypt. I've tried both the command above (fastboot format userdata & format data from TWRP directly) and I can access TWRP but when I restart the phone, I have boot loop on the loading screen.
If I don't use the command, and restart the phone directly (not going into TWRP first), the flashed recovery is automatically replaced with the MIUI recovery.
Anyone managed to actually boot the phone with the TWRP recovery installed with no decrypt error?
Thanks

leosantos said:
I have the same issue, it asks me for a password when accessing TWRP because it couldn't decrypt. I've tried both the command above (fastboot format userdata & format data from TWRP directly) and I can access TWRP but when I restart the phone, I have boot loop on the loading screen.
If I don't use the command, and restart the phone directly (not going into TWRP first), the flashed recovery is automatically replaced with the MIUI recovery.
Anyone managed to actually boot the phone with the TWRP recovery installed with no decrypt error?
Thanks
Click to expand...
Click to collapse
What did you install afterwards? did you clean install xiaomi.eu from twrp or updated china rom?

omer919 said:
What did you install afterwards? did you clean install xiaomi.eu from twrp or updated china rom?
Click to expand...
Click to collapse
Hi,
I didn't install xiaomi.eu afterwards neither updated the china rom. I'm using china rom (I live in China so there's some stuff on the chinese rom I can use and the updates are more swift), but it's the latest chinese miui rom with the update that came out a few days ago. I had the mi max 2 before and never had to update or re-install a rom after flashing TWRP. With the mi max 2 there were no issues after flashing TWRP in fastboot and then go to TWRP and flash super su. Do you reckon if I flash TWRP then flash the china rom through TWRP it won't give a boot loop (won't it re-write the TWRP bootloader with the miui one?)? If so, should I run the erase data command from fastboot or erase the data partition on TWRP recovery?
There's also a zip file to be installed in TWRP to avoid boot loop (can't recall the name right now), but didn't work either.
If someone has any ideas I'm willing to try on my end to figure this out
Thanks

leosantos said:
Hi,
I didn't install xiaomi.eu afterwards neither updated the china rom. I'm using china rom (I live in China so there's some stuff on the chinese rom I can use and the updates are more swift), but it's the latest chinese miui rom with the update that came out a few days ago. I had the mi max 2 before and never had to update or re-install a rom after flashing TWRP. With the mi max 2 there were no issues after flashing TWRP in fastboot and then go to TWRP and flash super su. Do you reckon if I flash TWRP then flash the china rom through TWRP it won't give a boot loop (won't it re-write the TWRP bootloader with the miui one?)? If so, should I run the erase data command from fastboot or erase the data partition on TWRP recovery?
There's also a zip file to be installed in TWRP to avoid boot loop (can't recall the name right now), but didn't work either.
If someone has any ideas I'm willing to try on my end to figure this out
Thanks
Click to expand...
Click to collapse
能成功吗？我也想安装supersu或者magisk

omer919 said:
What did you install afterwards? did you clean install xiaomi.eu from twrp or updated china rom?
Click to expand...
Click to collapse
Flashed TWRP again, did a userdata format from fastboot, then went to the recovery, deleted dalvik/cache and re-installed China ROM... Still stuck on boot loop.

same for me......... please help

Come on! Guys!
It is so simple to bypass this Internal Storage(0MB) problem on official China rom (Stable and Beta) of TWRP!
DO NOT use the "Install" option in TWRP to install Magisk.zip/Superusr.zip as TWRP cannot read your Internal Storage at all!
Just activate the adb sideload in TWRP and use the adb sideload command on your PC to push the magisk.zip/Superusr.zip or any zippies into your internal storage especially so if you are rooting the official China rom!
After that. Reboot to system from TWRP and Bingo! Your official China rom/MIUI pops up nicely in no time! :fingers-crossed:
...and the best part of it. You don't need to format data at all! All your data remained intact!!!
I'm running the official China rom 9.6.11.0 with Magisk 16.0 now! All work perfectly including the ever-most-impoartant's Titanium backup! :fingers-crossed::victory:

kelvintisw said:
Come on! Guys!
It is so simple to bypass this Internal Storage(0MB) problem on official China rom (Stable and Beta) of TWRP!
DO NOT use the "Install" option in TWRP to install Magisk.zip/Superusr.zip as TWRP cannot read your Internal Storage at all!
Just activate the adb sideload in TWRP and use the adb sideload command on your PC to push the magisk.zip/Superusr.zip or any zippies into your internal storage especially so if you are rooting the official China rom!
After that. Reboot to system from TWRP and Bingo! Your official China rom/MIUI pops up nicely in no time! :fingers-crossed:
...and the best part of it. You don't need to format data at all! All your data remained intact!!!
I'm running the official China rom 9.6.11.0 with Magisk 16.0 now! All work perfectly including the ever-most-impoartant's Titanium backup! :fingers-crossed::victory:
Click to expand...
Click to collapse
Please, make and example, how can we use adb sideload on PC. Thank

Nah!
I will not spoon feed. Go Google on how to use adb sideload with twrp.
In that way, you learn.

kelvintisw said:
Nah!
I will not spoon feed. Go Google on how to use adb sideload with twrp.
In that way, you learn.
Click to expand...
Click to collapse
kelvintisw, thank you so much! I resolve this problem with bootloop using ADB Sideload on MIUI Global)

Some ROMs are'nt flashing

Okay, lemme get this clear that I'm not a pro in all this stuff. Infact, I'm a total idiot.
I have tried to flash a lot of ROMs on my Moto G5 (cedric) but only 3 of them have worked, namely:
1) Pixel Expirience 7.1.2
2) Ressurection Remix 7.1.2
3) Viper OS 7.1.2
I don't know whats the problem and whether it is with my phone or the ROMs. Also, even after i used these ROMs, the apps which need root access weren't working and yes i did select the Root Access setting to ADB only(cause thats was the only option other than Off). Plz help me guys.....

Astitva_ said:
Okay, lemme get this clear that I'm not a pro in all this stuff. Infact, I'm a total idiot.
I have tried to flash a lot of ROMs on my Moto G5 (cedric) but only 3 of them have worked, namely:
1) Pixel Expirience 7.1.2
2) Ressurection Remix 7.1.2
3) Viper OS 7.1.2
I don't know whats the problem and whether it is with my phone or the ROMs. Also, even after i used these ROMs, the apps which need root access weren't working and yes i did select the Root Access setting to ADB only(cause thats was the only option other than Off). Plz help me guys.....
Click to expand...
Click to collapse
First you need to say how you have done the flashing of roms and which rom didn't flash, or what error you got while installing the rom. And second is you need to install magisk manager to gain root access with twrp, by enabling the root access in developer option won't give you root access you need to install it via twrp.

riyan65 said:
First you need to say how you have done the flashing of roms and which rom didn't flash, or what error you got while installing the rom. And second is you need to install magisk manager to gain root access with twrp, by enabling the root access in developer option won't give you root access you need to install it via twrp.
Click to expand...
Click to collapse
I tried flashing them through TWRP. They all were based on Oreo 8.1. I tried Lineage, Invicta, Viper, RR and pixel expirience. As for the error, i don't really know what error it was but Lineage and RR were stuck on the boot loader and the rest just didnt flash.....

Astitva_ said:
I tried flashing them through TWRP. They all were based on Oreo 8.1. I tried Lineage, Invicta, Viper, RR and pixel expirience. As for the error, i don't really know what error it was but Lineage and RR were stuck on the boot loader and the rest just didnt flash.....
Click to expand...
Click to collapse
Chance are you are using the wrong twrp
64bit roms require you to use the 64bit twrp
See the first post of the lineageos thread for the 64bit twrp
Or you can test out the 64bit twrp that uses my encryption edits
https://forum.xda-developers.com/g5/help/help-testing-build-twrp-arm64-t3874472
If you want to root flash the latest version of Magisk and then install the magisk manager app manually if it's not installed

TheFixItMan said:
Chance are you are using the wrong twrp
64bit roms require you to use the 64bit twrp
See the first post of the lineageos thread for the 64bit twrp
Or you can test out the 64bit twrp that uses my encryption edits
https://forum.xda-developers.com/g5/help/help-testing-build-twrp-arm64-t3874472
If you want to root flash the latest version of Magisk and then install the magisk manager app manually if it's not installed
Click to expand...
Click to collapse
I'm sorry but i didn't get what you said. I'm really sorry but I'm really a noob. I would like it if you helped me out a bit....

Astitva_ said:
I'm sorry but i didn't get what you said. I'm really sorry but I'm really a noob. I would like it if you helped me out a bit....
Click to expand...
Click to collapse
All custom oero roms for this device are 64 bit
You need to flash them with a twrp that has been compiled for 64bit twrp use
My official twrp is for 32bit roms only and will not flash 64bit roms - you will get error 7 or I think error 256 or something like that
Flash the 64bit twrp if you want to flash 64bit custom roms - process is the same as if flashing the official twrp via fastboot but you obviously use the 64bit twrp image instead
As mentioned link to 64bit twrp is on the lineageos 15.1 thread first page or try the version in the link I posted in previous post

TheFixItMan said:
All custom oero roms for this device are 64 bit
You need to flash them with a twrp that has been compiled for 64bit twrp use
My official twrp is for 32bit roms only and will not flash 64bit roms - you will get error 7 or I think error 256 or something like that
Flash the 64bit twrp if you want to flash 64bit custom roms - process is the same as if flashing the official twrp via fastboot but you obviously use the 64bit twrp image instead
As mentioned link to 64bit twrp is on the lineageos 15.1 thread first page or try the version in the link I posted in previous post
Click to expand...
Click to collapse
So, I can directly flash the new twrp like i flash the roms right?? Also, what can i do for project treble in my phone...i mean, i cant find redwolf for moto g5(cedric)

Astitva_ said:
So, I can directly flash the new twrp like i flash the roms right?? Also, what can i do for project treble in my phone...i mean, i cant find redwolf for moto g5(cedric)
Click to expand...
Click to collapse
You flash twrp via fastboot commands
fastboot flash recovery recovery.img
Although it is technically possible to flash twrp via twrp if you select image flash & select recovery as the image you are flashing but I'd stick with the fastboot method
I don't own this device anymore so no idea about files that are no longer available

TheFixItMan said:
You flash twrp via fastboot commands
fastboot flash recovery recovery.img
Although it is technically possible to flash twrp via twrp if you select image flash & select recovery as the image you are flashing but I'd stick with the fastboot method
I don't own this device anymore so no idea about files that are no longer available
Click to expand...
Click to collapse
Okay, so i flashed the twrp...but still therom isnt flashing....should i upload the rom so that you can see it?

basically;
if a rom has [64bit] in the title, then it's 64 bit, if it is then you need a 64bit recovery which you can easily find on the forum. you dont even need to know what that means.

Astitva_ said:
Okay, so i flashed the twrp...but still therom isnt flashing....should i upload the rom so that you can see it?
Click to expand...
Click to collapse
Just link to the rom on xda and give the twrp error
The rom either isn't for this device eg you are trying to flash a moto g5 plus or s rom or you are using the wrong twrp or you haven't formatted system data cache before flashing the rom

No chance to root this device..

Hi
My Max3 is in Global 10.3.2 stable and I like to root it. I installed TWRP mod recovery 3.2.3-4 from nijel8 and this works perfect. When I will install SuperSU-v2.82 or Magisk-v19 I have 'failed to decrypt data unable to decrypt with default password. You may need to perform a format data.
But when I format data the Max3 don't start anymore in System mode....
Does anyone have a soloution for this?
Many thanks in advance!!

Amadeus48 said:
Hi
My Max3 is in Global 10.3.2 stable and I like to root it. I installed TWRP mod recovery 3.2.3-4 from nijel8 and this works perfect. When I will install SuperSU-v2.82 or Magisk-v19 I have 'failed to decrypt data unable to decrypt with default password. You may need to perform a format data.
But when I format data the Max3 don't start anymore in System mode....
Does anyone have a soloution for this?
Many thanks in advance!!
Click to expand...
Click to collapse
Global rom cant be flash with twrp
You have to flash . eu rom and will work fine
Enviado desde mi MI MAX 3 mediante Tapatalk

Amadeus48 said:
Hi
My Max3 is in Global 10.3.2 stable and I like to root it. I installed TWRP mod recovery 3.2.3-4 from nijel8 and this works perfect. When I will install SuperSU-v2.82 or Magisk-v19 I have 'failed to decrypt data unable to decrypt with default password. You may need to perform a format data.
But when I format data the Max3 don't start anymore in System mode....
Does anyone have a soloution for this?
Many thanks in advance!!
Click to expand...
Click to collapse
Re-install the global rom via fastboot. Then, let's start, enable the developer option, USB debugging and installation via USB (there is another option related to USB, but I do not remember ... anyway, enable as well). Then, install TWRP again and format the data via adb (fastboot format userdata). Then enter TWRP and if it is still encrypted, format again by TWRP and restart twrp. After rebooting, you install magisk and restart the system. For me it worked, but I no longer use the global rom because it encrypts the data again.

On the Xiaomi.eu ROM Magisk worked as expected for me.

My friends hi. I flashing phones for years and many xiaomis but this phone have the antiroll protection. I want to flash the revos miui rom or the aicp but the second can't find.. anyway I'm afraid to do it.The ROM devs sad to me that they disable the antiroll back but I'm still afraid what you think?

If you have the decrypting error you can just sideload the SuperSU magisk zip. Just go to the sideload option in twrp then sideload the zip from adb on your PC. Worked just fine for me. I have root, xposed, and magisk running just fine.
There is no need to wipe and back up data. Ez pz.

nokiagye said:
My friends hi. I flashing phones for years and many xiaomis but this phone have the antiroll protection. I want to flash the revos miui rom or the aicp but the second can't find.. anyway I'm afraid to do it.The ROM devs sad to me that they disable the antiroll back but I'm still afraid what you think?
Click to expand...
Click to collapse
Hi! Same problem here! Had to switch to MM3 6/128 because I broke Zenfone 3 Ultra crying and had a hard time rooting it! Only way: Magisk via Sideload
Flash dozen of times with standard twrp way and SuperSu zip: no way! 10.3.2 is pretty ****ing hard to "rape"

hello
use this method to decrypt your phone ( from the chapter "Format Data Partition and Disable Encryption (Android Pie only)" ) on this link :
the custom droid install-twrp-recovery-root-xiaomi-mi-a2-a2-lite (search on qwant)
it works perfectly on my mi max 3