Develop Bugs

[Project Treble][UNOFFICIAL] for Wileyfox Swift 2/Plus/X

/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Project Treble
Important!
Recommended for installation only for advanced users​***What is Project Treble? ***
Project Treble allows to install - Generic System Images on our device with a minimum number of bugs.
Vendor - this is partition where proprietary files and drivers are stored, which are separate from the system.
***Userful Information***
Project Treble XDA Thread
Generic System Image (GSI) list
***Development and bugs***
Development has been started about 3 months. backwards During this time, dozens of errors were corrected and millions of nerve cells were lost.
Vendor is based on the stock firmware UOS273C with a large number of edits.
The kernel is used from vm03 with driver edits for working on Project Treble.
Bugs in Generic System Images:
On Oreo and Pie GSIs don't working SafetyNET.
My Magisk Module: Wileyfox Swift 2 SafetyNet Pass
Bugs in Vendor:
SELinux Permissive
For the fingerprint scanner to work correctly before being added to Settings, it is necessary to “poke” 5-6 times into it, for the driver to load correctly.
***Preparing device for support Project Treble***
Download TWRP Treble
Repartition script 16GB or 32GB
Download Treble Vendor
Download Treble Boot
Mirror on Google Drive
Mirror on Cloud Mail.ru
If you want get back default partition table just flash:
Download Revert - 16GB
Download Revert - 32GB
You need to copy all the necessary information to an external memory card or PC, since the internal memory will be formatted and devided into special partitions for Project Treble can work.
​
Install TWRP Treble in a convenient way for you.
Install Repartition script in TWRP. Depending on your internal memory size.
After installing repartition script, device will automatically reboot into Recovery, where you must do:
Format Data (Wipe > Format Data)
Wipe Vendor (Wipe > Advanced Wipe > Vendor)
After that necessarily to reboot the Recovery (Reboot > Recovery)
Flashing Treble Vendor (Just install zip archive)
Flashing Treble Boot (Select the option in the lower right corner Install Image, select Boot_Treble_new.img and flash it as Boot Image)
Install your favorite firmware (about this below). (Select the option in the lower right cornerInstall Image, than flash it as System Image)
***Installing Android Oreo or Android Pie GSIs***
Flash any GSi from Generic System Image (GSI) list or XDA Thread
always choose arm64 A-ONLY!
* If camera don't working on Pie flash:
Camera Pie GSI patch
* If the NFC item in the settings hangs, or the NFC does not turn on (this is usually the case in the old October GSI), flash:
NFC all GSI Patch
* Patch for fix fingerprint scanner on some Pie GSIs
Folder with patches
For ArrowOS GSI, HavocOS 2.0, AEX 6.1 fix not needed.
***Google Apps***
Install GApps only before the first launch of the ROM!
Open GApps Project
***Thanks***
Testing and moral support:
Kirill_MegaFon (4PDA)
xyzmean (4PDA)
Zent16 (4PDA)
backspace696 (4PDA)
Help in bug fixes and kernel sources:
vm03 (XDA)
Mirrors for download files:
anatoliy-is (4PDA)
Fingerprint overlay:
creativchic (4PDA)
XDA:DevDB Information
[Project Treble][UNOFFICIAL] for Wileyfox Swift 2/Plus/X, ROM for the Wileyfox Swift 2
Kernel Sourses
DevelopedInside
Contributors
fx-mod
ROM OS Version: Android 8.1.x and Android 9.x
Version Information
Status: Beta
Created 2018-09-30
Last Updated 2018-09-30

Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?

fred0r said:
Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?
Click to expand...
Click to collapse
To return the phone to stock, just install Factory Firmware.

fred0r said:
Never heard of 'Project Treble' before, but it sounds very interesting to be able to use 'Generic System Images'.
Before playing around with it - can you please also provide a 'Repartition Script' to get back to the default Partitioning ?
Click to expand...
Click to collapse
Done!

i installed treble according to your instruction and flashed a AOSP 8.1 image (system-arm64-aonly-gapps-su.img.xz) which should include gapps and su.
unfortunately the su-part wasnt available, so i tried to boot into the recovery by selecting it during the start of the phone - but i instantly came back to the 'boot-screen' without starting twrp.
for now the only way to get back on the 'treble-twrp' i need to boot it via fastboot (fastboot boot TWRP_Treble_marmite.img)
i this a bug or am i doing something wrong ?
[edit]
installed another rom which had the option in developers to reboot directly into the recovery - that worked.
---------- Post added 5th October 2018 at 12:12 AM ---------- Previous post was 4th October 2018 at 11:43 PM ----------
Now i installed the latest Oreo Resurrection-Remix from https://downloads.resurrectionremix.com/arm64aonly/ and during startup:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another thing is, that on all GSI-Images i installed so far the system-fonts are very tiny - like it's using a too high screen-resolution.

fred0r said:
......so i tried to boot into the recovery by selecting it during the start of the phone - but i instantly came back to the 'boot-screen' without starting twrp.
for now the only way to get back on the 'treble-twrp' i need to boot it via fastboot (fastboot boot TWRP_Treble_marmite.img)
i this a bug or am i doing something wrong ?
Click to expand...
Click to collapse
Nevermind - it works also to boot from the start. i needed first to select 'boot recovery' and then press on 'start' to boot into it.
Just installed the GSI from PixelExperience from pixelexperience.org and also get that 'vendor mismatch' message.

fred0r said:
Nevermind - it works also to boot from the start. i needed first to select 'boot recovery' and then press on 'start' to boot into it.
Just installed the GSI from PixelExperience from pixelexperience.org and also get that 'vendor mismatch' message.
Click to expand...
Click to collapse
I had this issue too and I believe flashing the vendor zip again did the job for me, not completely sure though.

xXxSAMIxXx said:
I had this issue too and I believe flashing the vendor zip again did the job for me, not completely sure though.
Click to expand...
Click to collapse
vendor miscmatch message is a warning. Not an error!

a great work ..soon i will get this device

I'd like to try out Android P. Has anyone tried this with a Swift 2 device and can recommend a GSI to use?
Edit: I couldn't get Pixel Experience (9.0) to boot succesfully but phhusson's AOSP 9.0 works. It's very barebones indeed. Someone made an overlay that makes adaptive brightness possible but I still can't adjust the LED for notifications. Not being able to turn off the charging/low-battery LED is a bummer. Otherwise it runs fine but I'll try a different GSI today.

Did you use the arm64 a-only image? I tried the arm a-only and that wouldn't boot but I'm (quite) happily buzzing along with the former.

fx-mod said:
* Patch for fix fingerprint scanner on some Pie GSIs
Phh AOSP 9 v106 [02/10/2018] only
ArrowOS 9 [23/09/2018] only
Pixel Experience P [20/09/2018] only
Click to expand...
Click to collapse
Is it possible to update the Pixel Experience P fingerprint scanner patch? The latest version of the ROM fixes the hotspot issues but the fingerprint scanner patch does not work.

erasmuswill said:
Is it possible to update the Pixel Experience P fingerprint scanner patch? The latest version of the ROM fixes the hotspot issues but the fingerprint scanner patch does not work.
Click to expand...
Click to collapse
it is done!

wileyfox swift 2X with 32GB storage.
32 gb repartition file ? or should i use 16 gb ?
just to be sure i'm not destroying my phone

waver1967 said:
wileyfox swift 2X with 32GB storage.
32 gb repartition file ? or should i use 16 gb ?
just to be sure i'm not destroying my phone
Click to expand...
Click to collapse
32 GB of course

failed to mount system
after doing all the steps twrp says no os installed

oeps my mistake..
forgot to unrar gsi file

Is it possible to patch at least one of Pie GSI's to work almost perfectly? Right now it is not possible to use any of GSI's for more than a week because every one have some annoying bugs

puszekkk said:
(
Click to expand...
Click to collapse
What does not suit you?

anatoliy-is said:
What does not suit you?
Click to expand...
Click to collapse
Broken hotspot, dumped fingerprints after reboot, broken wifi, broken audio routing :/

PBRP [Joyeuse][v2.9.1]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 2.9.1
For device: Redmi Note 9 Pro
Maintainer/Authors build: https://forum.xda-developers.com/member.php?u=8529431
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Kernel Source: https://github.com/Joyeuse-Indonesia-Project/kernel_xiaomi_sm6250
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Fully native android like UI
Supports Treble and non-Treble ROMs
Up-to-date kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
Code:
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Fix Dynamic Partition
- Improper mount of /data partition
- Some bug fixed
Downloads
Flashable zip
https://drive.google.com/uc?id=1HiPbEimxTiZlAXmjgVzf69bB_knn4H1E&export=dow nload

GREAT JOB!

Works on curtana? thanks

zenez said:
Works on curtana? thanks
Click to expand...
Click to collapse
onlye Joyeuse, in curtana you already have twrp and others.

All right, will try later. ?

Yuluga said:
onlye Joyeuse, in curtana you already have twrp and others.
Click to expand...
Click to collapse
Yes but this one is said dealing with dynamic partition. A must have.
Is it planned to have a release devoted to Curtana.
Thanks
EDIT:
I've just tested it on Curtana in order to test file copy/modify in system via file explorer.
Unsuccessful trial. System is still kept at read only state.
Anyway a real nice interface design. Thanks to devs.

any one test it? any bug?

hoang_phuong84 said:
any one test it? any bug?
Click to expand...
Click to collapse
It is working from what I can do on a Curtana. It cann't install because digest is not in accordance but should be working well on Joyeuse and at any point better than LR modded fix release available at T.me.
Just boot it on your phone and try it like that.

Recoveries struggle to get stable on this device/system it seems (what is the status of PBRP: alpha, beta, stable?). I saw something about a Android 10 Boot Partition causing the problems but would like to understand better if and how Recovery will work nicely with this device and Custom ROMs. Can someone point me to a explanation/thread why on RN9P, Android 10 it is so difficult to get a working Recovery for Custom ROM Install/Updates?

hello,
bravo for this excellent work, since the time we hoped functional custom recovery. Are all backup and restore functions functional, micro sd recognition, etc? ... Thank you

the right commend for Flash the recovery.img is "fastboot flash recovery recovery.img"
second, i get decrypt data after i reboot to recovery.

I have curtana twrp on joyeuse phone. Can ı flash via curtana twrp?
Edit 1: I tried install via curtana twrp. Error 1 fail...

Anybody try to flash latest Redmi Note 9 Pro EU ROM (v11.0.5.0) with this recovery? I tried dirty flash it from 11.0.4 and got error message. After flashing, It stay and boot on 11.0.4 but lost wifi mac address.

fathroen said:
Anybody try to flash latest Redmi Note 9 Pro EU ROM (v11.0.5.0) with this recovery? I tried dirty flash it from 11.0.4 and got error message. After flashing, It stay and boot on 11.0.4 but lost wifi mac address.
Click to expand...
Click to collapse
I've tried too but the same result.
"Fixed it" with fastboot first time installation of v11.0.4 and will wait for fastboot package v11.0.5.

After flashing recovery, and entering to PBRP is asking for password for decrypt data, i do not have password, my phone is not encrypted

fathroen said:
Anybody try to flash latest Redmi Note 9 Pro EU ROM (v11.0.5.0) with this recovery? I tried dirty flash it from 11.0.4 and got error message. After flashing, It stay and boot on 11.0.4 but lost wifi mac address.
Click to expand...
Click to collapse
Are you referring to the xiaomi.eu rom v11.0.5? If so, there's alot of people reporting problems booting after flashing that version. You're probably not referring to the stock rom, as I don't think there are any recovery flashable zips for that available.
In regard to fixing your wifi problem, in reading through the GSI rom thread, there are many reports of wifi being lost after flashing the boot.img from a different version of the stock rom than that which users were originally on without updating the other partitions. If the v11.0.5 boot.img was flashed to your phone, but some other partitions failed to flash, that may explain things. You could try downloading/extracting the v11.0.4 boot.img, either from the stock or xiaomi.eu rom package depending on which you are using, and flashing that again from fastboot using "fastboot flash boot boot.img".
Otherwise if that fails, reflashing v11.0.4 in its entirety should hopefully get your wifi working again.

mariob098 said:
After flashing recovery, and entering to PBRP is asking for password for decrypt data, i do not have password, my phone is not encrypted
Click to expand...
Click to collapse
Same issue here

You'll have to use the password/pass number you used to unlocked your device when waking it up.

blowy666 said:
You'll have to use the password/pass number you used to unlocked your device when waking it up.
Click to expand...
Click to collapse
But i do not have lock screen pin/password

thanks
Sent from my Redmi Note 9 Pro using Tapatalk

[ROM][11][TREBLE][UNOFFICIAL] crDroid v7.8 for the Nokia 8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Working features:
It boots
WiFi
Bluetooth
Navigation keys
Fingerprint
Camera
Headphones
Ringtones
Bluetooth audio
Selinux enforcing
NFC
4K video
Hotspot
Known issues:
You tell me
Flashing Instructions
Pre-installation
T-Virus (Download here)
TWRP (Download from here)
NikGapps (Download from here)
First time installation
Backup your device data to a PC or OTG flash drive.
Flash T-Virus with NOST and reboot to recovery.
Download and copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Format userdata and reboot to recovery to swich to the updated slot.
Flash NikGapps and wipe the Dalvik Cache (or else the system will not boot).
Reboot to system and enjoy.
Installing from previous release
Backup your data to PC, OTG flash drive.
Reboot to recovery, copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Reboot to recovery to swich to the updated slot and flash Gapps.
Reboot to system
Troubleshooting
When flashing the ROM in TWRP, it fails at Step 2
To fix this, flash any TWRP >= v2.4 which contains a fix for slot switching
After flashing TWRP v2.x the folders have weird names and I cannot copy stuff to the internal storage
You forgot the format userdata before rebooting.
The GSI in T-Virus is A10 and uses software encryption. My TWRP builds use hardware based decryption blobs which
are incompatible with software encrypted userdata. My ROM uses hardware encryption so that is not a problem.
But when you do not format data and install TWRP v2.x then it cannot decrypt the userdata created by A10 GSI.
So always format data before installing TWRP v2.x releases
Sources
ROM: https://github.com/GPUCode/OTA/releases/
Device tree: https://github.com/GPUCode/android_device_nokia_nb1
Common tree: https://github.com/GPUCode/android_device_nokia_msm8998-common
Vendor tree: https://github.com/GPUCode/proprietery_vendor_nokia
Kernel: https://github.com/GPUCode/android_kernel_nokia_msm8998
Visit official website @ crDroid.net
crDroid Community Telegram
Contributors
THMSP, OneWayGamer, oaid
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2020-11-26
Last Updated 2021-05-31

Some screenshots

That was fast...
T-virus of yourself (2020) I believe... Correct me if I'm wrong.

You can use any T-Virus you like. My own though contains an updated TWRP version which supports ROM flashing. If you use any older one, it is necessary to flash my new TWRP releases before you atempt to flash the ROM.

Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map

sdbadshah said:
Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map
Click to expand...
Click to collapse
These issues are being investigated, possible fix has been found, wait the update by dev.

Magisk
After Installing Magisk My Device Stuck on Boot

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Just tested on my phone, and Magisk works fine without causing any bootloops. What version are you flashing? You need to use version v21.0 and higher which supports Android 11
redhotdarkdevil said:
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012
Click to expand...
Click to collapse
It is most probably a hardware problem with your device. All of my testers never reported Wi-Fi/SIM issues except Dual SIM. Does Wi-Fi work for you on stock ROM or in any other ROM?

Can u share the link of magisk u r using?

sdbadshah said:
Can u share the link of magisk u r using?
Click to expand...
Click to collapse
I recommend downloading the most recent version from the official releases: https://github.com/topjohnwu/Magisk/releases

New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now

emufan4568 said:
New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now
Click to expand...
Click to collapse
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?

sdbadshah said:
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?
Click to expand...
Click to collapse
Flash new TWRP so you can update without having to repeat the whole process.

Arashone said:
Flash new TWRP so you can update without having to repeat the whole process.
Click to expand...
Click to collapse
Ok So Just Flash The New TWRP Then Flash Os RIght?

sdbadshah said:
Ok So Just Flash The New TWRP Then Flash Os RIght?
Click to expand...
Click to collapse
That should be it. It would be nice if we hear a report back from you.

Do these instructions/ROM work on TA-1052?

Married To Christ said:
Do these instructions/ROM work on TA-1052?
Click to expand...
Click to collapse
Nokia 8 hardware is unique. It's Google that differentiate them. So, yes.

Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.

TlalocC said:
Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.
Click to expand...
Click to collapse
The issue has been fixed with a patch, wait for new build or if yoou need to install a patch it's available on tg

I have Installed Pubg after servel time its obb got delleted when i try to reinstall it does not install

[ROM] [12.1] [TREBLE] [UNOFFICIAL] [Gapps/Vanilla] CherishOS V3.9.5 for Nokia 8 [NB1] [DISCONTINUED FOR A13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CherishOS is an AOSP based rom focusing on a Unique UI with many customizations.
Known bugs
- Loudspeaker is loud and creates some echo in calls
- TWRP recovery does not decrypt internal storage with a pin set, this is TWRP's fault, but does not affect OTAs, cancel when prompted for pin it will say its incorrect. [fixed with latest twrp]
- Offline charging animation does not work [FIXED in 3.5.2]
- SIM2 mobile data does not work (for dual sim users) but the sim itself works fine [FIXED in 3.5.2]
- gyro sensor creates a drift in some games [FIXED in 3.6]
- requires flashing atomix zip for WPA2 hotspot to work (attached) < now included, needs test. [no longer required]
- you tell me
Please ensure T-virus-2.0 is installed before attempting to flash this rom! follow this guide here: https://forum.xda-developers.com/t/nokia-8-nb1-full-rom-installation-guide.4349525/
Selinux status: Enforcing
Download
ROM
Release CherishOS 3.9 [12.1] [Gapps/Vanilla] [Unofficial] · megafire91/NB1-CherishOS_Releases
CherishOS for NB1 treble only [T-virus 2.0 required] Changelog: https://t.me/CherishOS/1120 Device changelog: Changed to LOS camera to resolve not saving issues Audio visualiser now working Offlin...
github.com
Recovery
TWRP:
Release TWRP 3.6.2 A12.1 for NB1 · Niemandausduisburg/android_device_nokia_A1N-NB1-TWRP-new
TWRP 3.6.2 A12.1 for Nokia 8 (NB1) Flashable bootimage & flashable zip availible. Known Features xD: - MTP / ADB don't work sometimes. To fix disable & re-enable MTP in Mount-options. - ADB sidelo...
github.com
The Zip installer is used for easier access when flashing roms, the img is there in case you have forgotten to flash the zip and have lost recovery.
Flashing instructions
Clean Flash:
1. Take a full backup of both your data and internal storage as it may be wiped.
2. Download the ROM from above link and flash the recovery zip
3. Download the recovery zip of your choosing and flash it if not already on latest twrp.
4. boot into recovery and either remove rom pin or wipe internal to have it accessible to copy rom zip over (due to the decryption bug) or just use external sd card to flash.
5. flash the rom zip and recovery zip again right after the rom zip before rebooting , it will reboot you to recovery automatically in other slot. (optional) cherish recovery included.
6. Flash any mods you may want
7. run factory reset from recovery, or wipe /data and /dalvik if you don't want internal wiped.
8. reboot to system and enjoy!
(flashing Atomix zip is only needed if you flash the .img to fix hotspot, but not with the zip)
Installing an OTA (Dirty flash):
1. Download the ROM from above link
2. flash the rom zip and recovery zip and let it reboot into recovery.
3. wipe Dalvik cache only
4. flash any mods you had previously flashed.
5. reboot to system and enjoy!
(flashing Atomix zip is only needed if you flash the .img to fix hotspot, but not with the zip)
Device support:
https://t.me/HMD_Nokia_8
Credits
Me for building the rom
@emufan4568 for the NB1 device and vendor tree, atomix kernel and TWRP.
Rany42 for all his help and contribution and for using his device trees, he doesn't have an XDA account.
@oaid for contribution to vendor tree and atomix kernel and countless hours of bug fixing
@CherishOS team for the amazing ROM
@THMSP for T-virus
all users in our telegram groups that helped us contribute and find bugs as well as sent us logs.
if i missed anyone in credits please let me know and ill add you to this list.
coffee:
Pay Marcel Dos Santos using PayPal.Me
Go to paypal.me/marceldossantos91 and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
paypal.me
if you do decide to donate, thank you, appreciate it more than you know.
Sources:
CherishOS: https://github.com/CherishOS
Device trees: https://github.com/GPUCode, https://github.com/c79

Reserved

in case anyone is wondering, the rom is considered stable and mostly everything works, but please when reporting bugs, attach a log, thanks!

Thanks!!!

build updated
Happy flashing!

In your instructions
I'm guessing step one should be make sure device bootloader Unlocked
And t virus is installed

johndaog said:
In your instructions
I'm guessing step one should be make sure device bootloader Unlocked
And t virus is installed
Click to expand...
Click to collapse
Yes you are correct. Ive updated the post accordingly, however it is always to be assumed any rom besides stock needs T-virus to work as it requires the treble base.

Thanks for making this! Out of curiosity, is this rom using the latest A11 DDV by @emufan4568 you mentioned in another thread?

r100 said:
Thanks for making this! Out of curiosity, is this rom using the latest A11 DDV by @emufan4568 you mentioned in another thread?
Click to expand...
Click to collapse
Yes, its using all the ddv blobs and hal's, and everything has been upgraded. All A12 roms for NB1 going forward will use them

Just flashed this ROM. Buttery smooth. Thanks a lot for your time and efforts.
Couple of possible bugs
1) Do not change the display cut out from default- it blanks the whole screen without any way to change back other than by factory resetting.
2) I can't connect to Internet when I turn on expressvpn. Might be just me though.
This just proves that the Nokia 8 is still a very capable device in 2022.
Can't really get a logcat for the first one but will look into the second one to see if there's a workaround for the VPN issue.

And just in case anyone is wondering, banking apps work just fine. Safetynet passes and Selinux is indeed enforcing

Latest Gcam seems to be a hit and miss for some modes. I'll share if there's a better one out there more suited to the Nokia 8
**Edit: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1434/
This one seems good and stable for me

Xda2022 said:
Just flashed this ROM. Buttery smooth. Thanks a lot for your time and efforts.
Couple of possible bugs
1) Do not change the display cut out from default- it blanks the whole screen without any way to change back other than by factory resetting.
2) I can't connect to Internet when I turn on expressvpn. Might be just me though.
This just proves that the Nokia 8 is still a very capable device in 2022.
Can't really get a logcat for the first one but will look into the second one to see if there's a workaround for the VPN issue.
Click to expand...
Click to collapse
Hi all, found a fix for the VPN not connecting. I found that I had to be on a TCP protocol for it to work. I had issues with a UDP connection. Didn't have this issue on Pie so assume it's to do with this ROM, but nonetheless here's the solution if you've got the same problem.

Xda2022 said:
Hi all, found a fix for the VPN not connecting. I found that I had to be on a TCP protocol for it to work. I had issues with a UDP connection. Didn't have this issue on Pie so assume it's to do with this ROM, but nonetheless here's the solution if you've got the same problem.
Click to expand...
Click to collapse
I just tested UDP now with windscribe and i connected without any issues. Likely the issue is your vpn providers app not fully compatible with A12 yet.

marceldossantos91 said:
I just tested UDP now with windscribe and i connected without any issues. Likely the issue is your vpn providers app not fully compatible with A12 yet.
Click to expand...
Click to collapse
Interesting... I guess it's a fix for anyone on Express VPN.

new cherish build up, QC is finally fixed with this update. happy flashing

marceldossantos91 said:
new cherish build up, QC is finally fixed with this update. happy flashing
Click to expand...
Click to collapse
Probably me being a bit stupid, but how do you update? I don't see an update menu- does this need a microsd card to flash over twrp for every update?

Xda2022 said:
Probably me being a bit stupid, but how do you update? I don't see an update menu- does this need a microsd card to flash over twrp for every update?
Click to expand...
Click to collapse
You have to dirty flash through twrp. I am looking into how i can integrate an OTA updater but for now dirty flash procedure

build is updated, the only change is that the H/W lights for keys should now work.
Happy flashing!

Nice one Marcel!

[ROM][13][UNOFFICIAL][GAPPS][JUDYPN] Evolution X | 7.9.3 Bulalo [06/25/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 7.9.3 Bulalo for the LG V40 ThinQ [judypn]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
​
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM​
What are our features?
- Just flash and check "The Evolver" -
Some features may not be available in this build version
SELinux permissive
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
HERE you have an example how to install it
Previous build versions
Changelog disponible on Telegram
Android OS version: 13.0.0_r52
Security patch level: JUNE 2023
Build Author: gregoorr
Source Code: Evolution-X GitHub
Kernel Source Code: https://github.com/EmanuelCN/android_kernel_lge_sdm845
ROM Developer: Joey Huab (Stallix)
Status: Stable
Release date: 2023-06-25
​​

Does the IMS stack work, meaning are VoLTE and VoWiFi functional for those carriers that support it?
Quad DAC functional?
[NG]Owner

Quad DAC works but VoLTE and VoWiFi don't.

why do i get bootloop when I install evolution X on my lgv40 and when I tried to flash the evolution X earlier version it will also get bootloop when I reboot. How to fix?

Hello
Clean flash or dirty flash?
Did you do format data and wipe dalvik cache after flashing the ROM?

greg_oor said:
Quad DAC works but VoLTE and VoWiFi don't.
Click to expand...
Click to collapse
Is there a toggle for it or is it just always on? Is DTS:X included?

blowtorchhonor said:
Is there a toggle for it or is it just always on? Is DTS:X included?
Click to expand...
Click to collapse
DTS:X is not included, Quad DAC is off, you have to turn it on, there is a toggle for it.

After flash Evo Rom (followed your guide), my phone bricked (it's show an android robot and text "no command". i was using Stock Rom (30c, TWRP, N0kernel).
Did i miss something? Ofox? Please help, i really want to use this ROM.
Now, i am trying to kdz my phone.
------------------------------------------------------------------------------------------------------------------------------
I did it. I got Evo X now. My god!

bestgames said:
After flash Evo Rom (followed your guide), my phone bricked (it's show an android robot and text "no command". i was using Stock Rom (30c, TWRP, N0kernel).
Did i miss something? Ofox? Please help, i really want to use this ROM.
Now, i am trying to kdz my phone.
Click to expand...
Click to collapse
"No command" that's aosp recovery xD Is recommended to use Stock ROM 30d. What you need to do? Factory data reset and in recovery (power + volume down 3s next volume up) reboot system now.

Thanks for replying! I already got Evo X working now. But after flashing magisk, i got bootloop.

I flashed magisk by adb sideload using TWRP without any problems and I updated it to latest version. Do you used magisk canary to flash?

greg_oor said:
I flashed magisk by adb sideload using TWRP without any problems and I updated it to latest version. Do you used magisk canary to flash?
Click to expand...
Click to collapse
I use magisk 20.4 stable (i flashed it for stock rom everytime kdz again). But TWRP is stay on Slot-a and system is on slot_b. After flashed the rom, rebooted to system, i can not boot in to recovery (no command).
If i use Qfil to replace boot_b with twrp and then flash magisk, phone's soft-brick.

You should use magisk canary(to slot _b, where the system is, I uploaded it) and stock ROM 30d with those two things everything is working fine. I tried TWRP only by fastboot, booting it, so no idea.

My God! I found out the way to fix all my problems:
1. Download Evo X ROM.
2. Reboot to TWRP recovery.
3. Format data (yes) and then Wipe Data, cache, system.
4. Flash ofox recovery (it will writes ofox to slot_b, the same location with system).
5. In ofox, change "Data partition" to F2FS.
6. Flash Magisk Canary (download from your link).
7. Reboot to system.
8. Say YEAH!
I spent 3 hours to find out what the f* 's happenning (01:00 AM in my country now).

Great!

bestgames said:
My God! I found out the way to fix all my problems:
1. Download Evo X ROM.
2. Reboot to TWRP recovery.
3. Format data (yes) and then Wipe Data, cache, system.
4. Flash ofox recovery (it will writes ofox to slot_b, the same location with system).
5. In ofox, change "Data partition" to F2FS.
6. Flash Magisk Canary (download from your link).
7. Reboot to system.
8. Say YEAH!
I spent 3 hours to find out what the f* 's happenning (01:00 AM in my country now).
Click to expand...
Click to collapse
Where did you find orangeFox for this device?

Did anyone successfully flashed this gsi on LGV40 - 405UA? if yes any tips or instructions. My multiple attempts all eneded in boot loop failure ......
​

sim data is not working on this rom, any solution
tried on korean N model.

Want to share this, this is best custom Rom i had try on V405EWB

haseebali55554 said:
sim data is not working on this rom, any solution
tried on korean N model.
Click to expand...
Click to collapse
Hi,
Have you manually set yours apn parameters ?