Related
LineageOS 14.1 has been started.
https://download.lineageos.org/d2tmo
I'm running latest nightly with no problems so far.
Sent from my SGH-T999 using XDA-Developers Legacy app
Awesome to see this. I'm waiting on a few things to wrap up but will updating my t999 ASAP.
Questions, which exact gapps did you use ? Does lineage have their own forums ?
toro143 said:
Awesome to see this. I'm waiting on a few things to wrap up but will updating my t999 ASAP.
Questions, which exact gapps did you use ? Does lineage have their own forums ?
Click to expand...
Click to collapse
For Gapps: http://opengapps.org/
Lineage OS community: http://lineageos.org/community/
So far I'm loving it! Tried to dirty flash from CM but got an error.
So clean install and so far so good, must play with it some more and feels familiar
Thanks!
Camera crashes when going to movie mode. Open camera works fine.
Today weekly it's not installed. It gives an error code 7...
This problem was on cm roms before i ran linageos on my t999, usb tethering this service doesnt work when i turn on the wifi but when i restart my device and active it emediatly it works ,is there any solution ???
hi guys, i install this rom in my t999, and now i have a very rare problem ... i can't call, and no show signal ... (look the image), the problem become rare because i can recieve calls (says call from emergency service) and SMS ... i'm looking for this problem in google .. and nothing...
https://drive.google.com/open?id=0BxMZVpOD7gCdeWVEbHJjRlZ4UW8
https://drive.google.com/open?id=0BxMZVpOD7gCdd3FINWdEUUNnSDQ
what modem and nightly?
No sound at all
I recently experienced a problem after using CM 13 for quite a while on my S3 T-999. The phone doesn`t make any sound at all. Neither the speaker nor the microphone. I flashed LineageOS a few days ago but the problem still persists. I also tried Mokee rom but it also couldn`t get rid of this issue. I finally flashed stock rom and the sound is back. I can make calls and use youtube, the audio is just fine on stock rom.
The only problem is jellybean is too slow and battery consuming for my aging S3. Guy do you have any idea how can I make the sound work on this rom ? Any help would be appreciated.
What are the best custom Kernels to go with this ROM ???
is there any news about supporting d2 verisons or say goodbye to this device
hasan.sy said:
is there any news about supporting d2 verisons or say goodbye to this device
Click to expand...
Click to collapse
Support is discontinued.
hudson: Pull d2
* I don't have time to maintain these anymore
Click to expand...
Click to collapse
This device is still Rock solid and it's a shame we don't have support on this device anymore. I understand the developer though and I thank him for all his effort up until now. I hope someone else could continue his work on this great phone
pcaseiro said:
I hope someone else could continue his work on this great phone
Click to expand...
Click to collapse
Mokee rom updated every day. Carbon rom supporting too.
Hey, guys. Autocorrect for me isn't working even though it's on. When I type text in the virtual keyboard, it doesn't correct misspelled words. Any way to fix this?
https://download.lineageos.org/t0lte
I just noticed that the LineageOS just released their first t0lte nightly build (dated 2017-03-31 10:30:24). I came here to find people who have tried it out, but things seem pretty quiet here. I have not tried it out yet, but in the past I've seen other attempts at Note II Android 7.x roms have cell/data issues. I'm going to try this soon, but if someone beats me to it, let me know what you find.
Did you try this yet?
Tried this out and still using it. Working great so far. Definitely worth trying
I'm using it as everyday use, it's very good
How is the cell/data signal with this rom? I haven't found a rom yet that provides good 4g lte signal.
Does it work with the tmobile note II (t0ltetmo)?:
Yes it works o t mobile. I tested it for phone calls, mms, gps and blue tooth Connection. Only issue I had was mms I send the phone a picture and it was stuck o downloading. Well the fix was to switch APN then reboot and then I think k it's switched backon its own. So mms is working now. I have not had any issues apart from that. So yes you should try it. Good luck.
Thanks for making this for such and old device.
I tried this out looks working..before i install the open gapps file.. after installation of open gapps file, phone keeps restarting by it self. I install open_gapps-arm-7.1-stock-20181209.zip.
Which Gapps file you guys are using?
Redo installation everything is working except for making and receiving calls. Data working. Front camera blur. back camera working.
3g connection never connect, 4g sometimes connected but for seconds like ten seconds, i mean not stable, very unstable and very limited connection. Its so annoying. Any suggestions? Please help me.
My device info: mi 5s 4gb/32gb, miui 9.2.1.0 global stable.
Edit: gsm also isnt working well. Testing a couple things my friends and my family couldnt reaching me. Gsm signal indicator is showing full but not working properly.
What twrp version, from which rom did you switch to MIUI? And also what MIUI rom did you flash, EU MIUI, or official?
predragiPredrag said:
What twrp version, from which rom did you switch to MIUI? And also what MIUI rom did you flash, EU MIUI, or official?
Click to expand...
Click to collapse
Upgraded miui 9 from miui 8 with ota update, i mean all of it official and legal, but miui 9 has those connection problems. Also i didnt see those issues on miui forums or another platforms, is that only for me? Weird :/
feco86 said:
3g connection never connect, 4g sometimes connected but for seconds like ten seconds, i mean not stable, very unstable and very limited connection. Its so annoying. Any suggestions? Please help me.
My device info: mi 5s 4gb/32gb, miui 9.2.1.0 global stable.
Click to expand...
Click to collapse
Edit: adding screenshot.
Hmm that is infamous "stable" global beta rom... You cannot download it on official site, but you can only get it by OTA, and only selected users had that option.
My advice is to back up everything and do factory reset. It is not strange that something gets messed up while updating MIUI8 to MIU9..
predragiPredrag said:
Hmm that is infamous "stable" global beta rom... You cannot download it on official site, but you can only get it by OTA, and only selected users had that option.
My advice is to back up everything and do factory reset. It is not strange that something gets messed up while updating MIUI8 to MIU9..
Click to expand...
Click to collapse
I hate back uping, anyway ty for advice i hope those will solve.
feco86 said:
I hate back uping, anyway ty for advice i hope those will solve.
Click to expand...
Click to collapse
Or just wait for miui 9.5 in late April That one should solve all issues.
predragiPredrag said:
Or just wait for miui 9.5 in late April That one should solve all issues.
Click to expand...
Click to collapse
Ye ikr. :cyclops:
Solved.
Hello Guys, I just bought a Lenovo Z2 Plus and wanted to install a custom rom on it. I did my thorough research through XDA and Youtube about various OREO based custom roms available for this phone. I like the Pixel Experience Rom but I am a newbie in flashing custom roms. I read in few threads about network connectivity issues in the Pixel Experience Rom and Resurrection Remix rom as well. In few of the youtube videos, I saw that the battery backup and Antutu score of Pixel Experience rom is marginally lower when compared to Resurrection Remix.
Can you guys give me your opinion on which rom should I install on my stock device. Kindly please provide the respective rom's Antutu Benchmark scores and Screen On Time especially for the Pixel Experience Rom. Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Thanks.
I have tried the PE (Pixel Exp) ROM and here my observations on that.
The Good
Extremely fluid. Performance is mind blowing. I have tried 3 Custom ROM so far (AEX, RR, PE) and PE felt the best performing in terms day to day device usage. Feels like PE is meant for Z2 Plus and vise versa. Everything works out of the box, GApps are preloaded, ROM is simple but very effective. All sensors, every piece of hardware included in the phone works perfectly. I never felt it was a custom rom, felt like meant for Z2 Plus.
The Bad
Not just just pixel, this is present in all Custom ROM for me and my device. I am from India, and using Reliance Jio VoLTE.
Now the problem is network reception isn't as good as stock ZUI.
The 2.4GHz WiFi got limited to 72 mbps only. Stock ZUI has no problem, tried changing few ROMs and finally settled with AEX which I see can connect to 2.4GHz WiFi and 150 mbps. I have tried baseband 1.76 (ZUI 2.5.104 ST India) and baseband 1.70 (Latest) for ZUI 3.5.3xx China. Nothing seems to help. Out of 4 ROM, Stock ZUI (2.5/3.5), PE, RR, AEX, only ZUI and AEX are able to give me a 150 mbps wifi link speed.
Now regarding the VoLTE reception. VoLTE works fine but network is fluctuating like hell. For me, the same is present in all three custom rom I have tried. AEX, RR, PE. Tried baseband 1.70/1.76 but couldn't solve it. There are no call drops but network isn't stable at all. Tested with Reliance Jio NetVelocity app for detailed information and it seems with none of the Custom ROM, Phone is able to sustain a stable 2300 MHz link. Falls back to 1800 MHz and 850 MHz randomly. Network speed wasn't bad, infact I would say satisfactory.
Only ZUI seems to have a stable Jio reception for me.
The Ugly
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Presently using AEX ROM without any extra modification. Performance isnt as fuild as Pixel ROM but less problematic than others. Infact only ROM allowing me a 150mbps WiFi link speed.
Please guide me about the bootloader unlocking and TRWP installation process as well. The last time I did all these was 2 years ago so kindly help me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Follow this guide to unlock the bootloader and install TWRP. Then installation processor of ROM will depend on which ROM you select. Note, there are two different ROM type now. 1. Full Treble 2. Non Treble. Installation process are different for them.
Pixel is a non treble ROM. Like 2 years ago, you would feel similar setup process.
If you chose Pixel, after you have unlocked and got TWRP installed,
1. download PE ROM
2. boot into TWRP
3. Wipe system, data, cache, dalvik
4. Flash ROM
5. Wipe Cache
6. Reboot
If all went ok, frist boot will take a few minutes and you will be asked to setup your Google Account under Pixel Exp ROM.
Remember, I am not an expert so wait for others to comment and guide you !! Just sharing from my personal experience !!
Good luck.
NaXal said:
I have tried the PE (Pixel Exp) ROM and here my observations on that.
Battery issue. SOT is similar with 3 roms I have tried. PE/RR/AEX but something under PE is causing serious battery drain while idle. Overnight the phone is losing 2.5% to 3% battery per hour. I have tested to different custom kernel. AR-Beast and Heliox v2.0 with PE. Liked AR-Beast better as Heliox would underclock the CPU/GPU. Now with AR-Beast the idle battery drain came down to just around 1% per hour but still higher than default Resurrection Remix (RR ROM) or AEX ROM.
Click to expand...
Click to collapse
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
4tanmoy said:
Thanks man, can you provide the link for AR Beast kernel. When should I flash it, I mean along with rom or after flashing rom?
Click to expand...
Click to collapse
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
@4tanmoy
One small mistake from my end. PE ROM comes with GApps included. So when you flash PE ROM, you don't need to Flash GApps again.
NaXal said:
https://forum.xda-developers.com/le...rbeast-kernel-r2-3-18-81-jan-14-2018-t3735016
You need the NON-TREBLE new trees for PE ROM
Now as I said I am no expert so I dont know if one should flash kernel at one go. I can only tell you what I did.
First I did the PE. Setup the phone and used it for 20 odd minutes while setting up all the things. Then I went on to flash the AR-Beast. Some one suggested me not not turn on the phone immediately after kernel flash. Rather power off from TWRP wait for 10 mins before switch on. I don't know if it is required or not, but I have followed that advice.
Thanks.
Click to expand...
Click to collapse
thanks
4tanmoy said:
thanks
Click to expand...
Click to collapse
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
NaXal said:
Did you flash it ?
Share your experiences with Pixel. What is working, what's not, how is it doing ?
Click to expand...
Click to collapse
Yes, I did some more research. Flashed PE with UberCool.
After Setup, I flashed AR Kernal and SuperSu.
Installed Google Camera Mod for HDR+ and Potrait Modes.
Flashed Dialer Fix to resolve the dialer problem as it showed that phone is not supported when launching dialer. now fixed.
The PE ui is butter smooth, phone doesnot heats anymore. Charged last night till 100 % and browsed youtube, downloaded my preferred apps from play store, browsed quora for 30 mins, took some pictures. In the morning I played subway surfers, clash royal, some web browsing, downloaded all remaining apps for my phone. The battery is now 59% while I typing this from the phone.
Overall, I am astonished by the PE smoothness and completely satisfied by the battery life.
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
NaXal said:
Excellent !!
Could you please check two things, how is the battery drainage overnight? While phone is idle.
Secondly, what is the WiFi Link speed?
Basically, two of my main problems lol
Click to expand...
Click to collapse
the wifi link speed is 72 mbps and about battery drainage overnight, i'll post tomorrow morning
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
4tanmoy said:
regarding battery drain, I slept at 02:40 at night at 21 %. Woke up at 08:15 at 17 %. I guess 1% per hour. I am getting a Stand By time of 20+ hours and Screen On Time of more than 5 hours 30 minutes approximately.
Click to expand...
Click to collapse
Thanks for the reply.
Your data is very similar to what I have experienced with Pixel ROM.
This drainage is one of the issue for which I had to move out of Pixel ROM
Excellent review, I too installed PE and is enjoying every bit of Pixel, but the main problem I am facing is ,my phone's all sensors are dead or not working has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Would like ask someone from the forum to please help me to fix the isaue, as far as Custom rom in Zuk 2 I will stick to Pixel as it is the best till now what ever I have used . I have TWRP installed has flashed sensor.zip available in the Zuk Forum but nothing seems to work.
Waiting for a reply from the forum members it they take out sometime to help a man is distress.
Kamal_halder said:
has tried Zuk Official too The nougat Indian and The Oreo Chinese version, but without any luck proximity gyroscope pedometer and other sensors are not working,
Click to expand...
Click to collapse
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
NaXal said:
Its a clear sign that something wrong with the hardware.
Do you have warranty left ?
If you do, QFIL 1.9 then flash 2.5 Indian ROM. Everything will be bone stock with locked bootloader and stock recovery. Go and claim warranty !!
Click to expand...
Click to collapse
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
If the issue is present with stock ROM also with bone stock phone, then it feels that the issue is with the Hardware.
Anyway, hope you find a solution and if you do, pls post that so that for reference if later down the some one needs he can fix his issue.
Kamal_halder said:
Thanks for the reply but I think it has nothing to go with hardware issue, has read several posts mentioning same problem and they got it resolved one or the other way I am waiting for the same and as fast as warranty is concerned I don't think it has . Purchased long ago .
Click to expand...
Click to collapse
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Lankapatiraawan said:
Flash sensor.zip(you will find it in the main thread) then wipe dalvik/cache and reboot. If the problem persist disable ur every battery saving related mod. Lemme know If still dosent work.
Click to expand...
Click to collapse
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Kamal_halder said:
Yes did that but nothing changed no sensor worked proximity nor gyroscope nothing did worked. I recently goty display changed seems that the chap has forgotten to clip the sensors stip. I assume that .
Click to expand...
Click to collapse
How much for the display change?
I got a friend with cracked 3GB variant needing a display change. Just taking an idea about approximately how much you spent for this change
Link to original thread: A52 4G forum
Updated to Lineage 19.0!
Hey man! Everything is working great as far as I can see right now. Only one big drawback is the fingerprint scanner not working on Galaxy A72. It's not that it's registered and then it's failing. You can't even register it sadly.
Any fixes soon? Or is there a workaround which I am supposed to do, that I don't know about?
Thanks!
nadtonii1 said:
Hey man! Everything is working great as far as I can see right now. Only one big drawback is the fingerprint scanner not working on Galaxy A72. It's not that it's registered and then it's failing. You can't even register it sadly.
Any fixes soon? Or is there a workaround which I am supposed to do, that I don't know about?
Thanks!
Click to expand...
Click to collapse
Sorry, sadly I only own A52 which makes it really hard for me to fix it on A72.
Simon1511 said:
Sorry, sadly I only own A52 which makes it really hard for me to fix it on A72.
Click to expand...
Click to collapse
There are some suggestions.
Google Camera does not start, crashes. On GSI it helped to turn on the vendor Q.
In the screen settings, can you add a graph of picture saturation settings?
And is it possible to add a system backup to Lineage Recovery?
Realees56 said:
There are some suggestions.
Google Camera does not start, crashes. On GSI it helped to turn on the vendor Q.
In the screen settings, can you add a graph of picture saturation settings?
And is it possible to add a system backup to Lineage Recovery?
Click to expand...
Click to collapse
1. Which version of GCam? BSG works fine for me.
2 & 3: No, such features don't exist.
Simon1511 said:
1. Which version of GCam? BSG works fine for me.
2 & 3: No, such features don't exist.
Click to expand...
Click to collapse
Also BSG
Is it by any chance due to the rise kernel?
Realees56 said:
Also BSG
Is it by any chance due to the rise kernel?
Click to expand...
Click to collapse
No, it shouldn't be related to the kernel.
I'll investigate soon.
Simon1511 said:
No, it shouldn't be related to the kernel.
I'll investigate soon.
Click to expand...
Click to collapse
Of course it's a pity lineage recovery won't have a backup function, it's inconvenient to flash twrp every time.
And the colour saturation setting as on oneui is missing. I don't understand why you chose LOs, there's nothing in it at all, you can't even choose colours in styles. I was sitting on GSI 12A CrDroid before your firmware, great firmware in terms of customization. Never used google services. Never used google services.
Unfortunately when upgrading to GSI v402 the phone is extremely hard to start. About 8 times on reboot out of 10, 8 times caught bootloop. And this is on any v402 firmware.
In any case your firmware is better, even without having to patch separately the boot for magisk in order to run it on 12A GSI
Realees56 said:
Of course it's a pity lineage recovery won't have a backup function, it's inconvenient to flash twrp every time.
And the colour saturation setting as on oneui is missing. I don't understand why you chose LOs, there's nothing in it at all, you can't even choose colours in styles. I was sitting on GSI 12A CrDroid before your firmware, great firmware in terms of customization. Never used google services. Never used google services.
Unfortunately when upgrading to GSI v402 the phone is extremely hard to start. About 8 times on reboot out of 10, 8 times caught bootloop. And this is on any v402 firmware.
In any case your firmware is better, even without having to patch separately the boot for magisk in order to run it on 12A GSI
Click to expand...
Click to collapse
If you're unhappy with lineage feel free to build any other ROM on your own, the device trees are all on my Github.
friend! please don't stop developing this system, it's the best I could find for me a72, as soon as I can I'll send support through paypal
¿Funciona en Samsung A71?
Translated by GT: Does it work on Samsung A71?
usuario888 said:
¿Funciona en Samsung A71?
Translated by GT: Does it work on Samsung A71?
Click to expand...
Click to collapse
No. As the thread says, this is exclusively for A52 4G and A72.
Is this Rom still in development I have the A72 4G. Want to load the custom OS
GoldenJet said:
Is this Rom still in development I have the A72 4G. Want to load the custom OS
Click to expand...
Click to collapse
Yes, it is.
tried this rom its quite unstable loads of issues, still its the only rom at the moment. I reverted to stock.
Ok this was posted in haste and a bit in irritation what I meant is simply this is not useable as stable rom,
Its unstable and has issues. This is not meant as a revieuw or judgement of said rom. Its the first and currently only one avalible and kudo's to the creator. Its listed as development. Its just a quick feedback for those like me that just like to know if its stable or not.
Spacecabbie said:
tried this rom its quite unstable loads of issues, still its the only rom at the moment. I reverted to stock.
Click to expand...
Click to collapse
Would you mind telling me about the issues you experienced?
From my point of view (and from what others told me) it runs pretty stable and mostly bugless on both A52 and A72.
I have it running for weeks now as second device. Only real issue is fingerprint sensor and camera, could not find any gcam mod that would work properly. Apart for it - runs stable.
Simon1511 said:
Would you mind telling me about the issues you experienced?
From my point of view (and from what others told me) it runs pretty stable and mostly bugless on both A52 and A72.
Click to expand...
Click to collapse
Sorry Muyst have missed this,
Also edited initial post cause it was imho blunt and to negative. Sorry about that I have nothing but respect for mod creators.
I din't extensivly test but:
Vingerprint reader but this was known.
I had some screen issues (swiping up from bottem wouln't work so couln't close apps.
pixel launcher kept crashing (yes this might not be rom related but nova launcher also had issues)
General instability possibly all related to screen.
There where some other issues but as said my intention was not to extensivly screen it the above combined with the other small issues made me decide to remove it again.
I was using lineage os 19 in my Samsung Galaxy A72. It's better than pixel plus ui rom. It has 90hz screen refresh rate. But this rom has the following bugs also:
1. Proximity sensor not working at all;
2.Fingerprint or face unlock not working;
3. No safety net pass.