I can't get wireless android auto working on my PX6 MAX 10.
I have the Bluetooth connected to my phone and my phone connected to the head unit's hotspot but nothing happens.
Works over wired though...
DellDimension3000 said:
I can't get wireless android auto working on my PX6 MAX 10.
I have the Bluetooth connected to my phone and my phone connected to the head unit's hotspot but nothing happens.
Works over wired though...
Click to expand...
Click to collapse
Same here, any suggested solution?
pretty sure it doesn't support it. try using headunit reloaded app instead, but its still a faff to get working
Related
I'm using Mildwild 5.0 as daily ROM. I noticed that even though bluetooth is on, the phone does not connect to the remote audio device.
The pairing process is successful, however the connection is not automatic.
I need to manually connect the phone to the device using the Wireless settings menu.
Did anybody notice the same behavior?
aaf107 said:
I'm using Mildwild 5.0 as daily ROM. I noticed that even though bluetooth is on, the phone does not connect to the remote audio device.
The pairing process is successful, however the connection is not automatic.
I need to manually connect the phone to the device using the Wireless settings menu.
Did anybody notice the same behavior?
Click to expand...
Click to collapse
It doesn't happen to me. I have a bluetooth headset, and it alwaya connects to it.
abaaaabbbb63 said:
It doesn't happen to me. I have a bluetooth headset, and it alwaya connects to it.
Click to expand...
Click to collapse
i have the same issue, i could not transfer photos to another device through bluetooth, haven't checked a handsfree because i don't have one, but there is a bluetooth issue
I had used this ROM for couple days and I don't have this issue. Maybe try with MV 14.
aaf107 said:
I'm using Mildwild 5.0 as daily ROM. I noticed that even though bluetooth is on, the phone does not connect to the remote audio device.
The pairing process is successful, however the connection is not automatic.
I need to manually connect the phone to the device using the Wireless settings menu.
Did anybody notice the same behavior?
Click to expand...
Click to collapse
I had a similar problem with this ROM and my car's audio/phone system. I suspect the problem was on the side of my car's bluetooth, because after erasing the link on car's side, I was able to setup it again, successfully.
bruno.unna said:
I had a similar problem with this ROM and my car's audio/phone system. I suspect the problem was on the side of my car's bluetooth, because after erasing the link on car's side, I was able to setup it again, successfully.
Click to expand...
Click to collapse
I'm still experiencing the same issue with MW 14.
My car kit is most probably a BT 1.1 device.
Here's the relevant logcat information
Code:
E/BluetoothEventLoop.cpp(167): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1081/hci0/dev_00_14_09_13_51_33
Enyone suceeded in enabling Internet via Bluetooth? (enable BT theathering on phone, pairing HU with phone and enabling HU to use phone Internet connection - that way no need for USB modem in HU if you have internet on phone and you take your phone with you in car as we do most of the time).
I was trying to enable that with my LG G3 phone but it doesn't work.
(I'm using Malaysk ROM, KGL unit type)
Any hints appreciated.
Hi, I just switched on "hotspot" in my Moto G menu then switched on WiFi on Headunit then they just paired up, hope this helps.
Bill.
bilnick said:
Hi, I just switched on "hotspot" in my Moto G menu then switched on WiFi on Headunit then they just paired up, hope this helps.
Bill.
Click to expand...
Click to collapse
Thank you but that is different thing. I wish to use BT specifically.
pa.ko said:
I wish to use BT specifically.
Click to expand...
Click to collapse
Try this app (there is a trial version to test with):
https://play.google.com/store/apps/details?id=com.bluedunx
I haven't tested that app myself as I use a USB 3G dongle.
themissionimpossible said:
Try this app (there is a trial version to test with):
https://play.google.com/store/apps/details?id=com.bluedunx
I haven't tested that app myself as I use a USB 3G dongle.
Click to expand...
Click to collapse
Not working
I searched around and it looks like bug in Android 4.4.4 preventing BT theathering to work (in fact it works but apps cannot use that connection).
Anyone found workaround?
I’ve purchased a Dasaita PX6 headunit. It’s advertised as Max6. Here are the specs:
Build number:
rk3399-userdebug 9 PQ2A. 190305.002 20190828.185647 test-keys
Kernel version:
4.4.167
#593 Tue Aug 27....
MCU Versipn
MTCE_HA_V3.30_2
I am also running an iPhone XS on iOS 13.2.
I’ve tested the hotspot on my iPhone with other decided and they are able to connect. I’ve also tested other iPhones on the Dasaita to see if it will connect to them. Unfortunately, I’m not able to get any iPhone to connect to the head unit. The head unit is able to connect to other SSID that are not iPhones. Can anyone help me with this? Thanks!
Have you seen this?
nic2k said:
Have you seen this?
Click to expand...
Click to collapse
Yes, I have. I've tried all the tips. Nothing. It's weird because the head unit can pick up other hotspots/wifi SSID, but it does not find my iPhone. Initially, I could see the iPhone hotspot. It says "Connected...Saved" - this repeats 3 times and then it goes away.
Is your hotspot configured for G and N?
nic2k said:
Is your hotspot configured for G and N?
Click to expand...
Click to collapse
Not sure - whatever the standard is for iPhone XS running iOS 13.1.2 - I assume it's AC...
nic2k said:
Is your hotspot configured for G and N?
Click to expand...
Click to collapse
There is no way I can configure this - it happens automatically in the background, configured by Apple.
Even with the new MCU 3.37 update, I still get this problem occassionally. I've been turning the personal hotpot on and off multiple times, before the wifi connects itself!
vortxnat said:
Even with the new MCU 3.37 update, I still get this problem occassionally. I've been turning the personal hotpot on and off multiple times, before the wifi connects itself!
Click to expand...
Click to collapse
Dude! You’re luckier than I am! I have that MCU as well, but my hotspot is not found ever! After it’s found the first time, it connects, saves the SSID, and then never displays or connects ever again.
I think this is both an iPhone AND head unit issue. It’s weird because not only can I not see the iPhone hotspot on head unit while sitting in the car, but I can’t see it on other devices either. However, as soon as I walk about 5 feet away, I can see the ssid.
So weird.
Hmm, when you turn on personal hotspot for your iPhone, you got to make sure to keep the screen on, at the page where to turn on your hotspot to wait for the headunit to connect. Then keep trying multiple times, or change your hotspot password!
edwin617 said:
However, as soon as I walk about 5 feet away, I can see the ssid.
Click to expand...
Click to collapse
Could be the location of the WiFi antenna.
I had the same issue on my Samsung Note 10+, I had to turn off "Allow 5ghz" in my wireless sharing options advanced settings. Then my MAX6
connected.
I was having a similar issue with my iphone hotspot being found, but not connecting, just saying "saved." The was being caused by the bluetooth connection between the head unit (car kit) and the iphone. You need to go into the iphone's bluetooth connection settings for the head unit (car kit) by tapping the "i" icon and then turn off carplay in the settings there. This should allow the iphone hot spot to be found and connected to by the head unit. It worked for me.
Same for me... Sometimes, turning off and on the iPhone then connects. in some cases it connects immediately ... boh
px6 issues
edwin617 said:
Yes, I have. I've tried all the tips. Nothing. It's weird because the head unit can pick up other hotspots/wifi SSID, but it does not find my iPhone. Initially, I could see the iPhone hotspot. It says "Connected...Saved" - this repeats 3 times and then it goes away.
Click to expand...
Click to collapse
hey mate have you had your problem fixed
seangh said:
I was having a similar issue with my iphone hotspot being found, but not connecting, just saying "saved." The was being caused by the bluetooth connection between the head unit (car kit) and the iphone. You need to go into the iphone's bluetooth connection settings for the head unit (car kit) by tapping the "i" icon and then turn off carplay in the settings there. This should allow the iphone hot spot to be found and connected to by the head unit. It worked for me.
Click to expand...
Click to collapse
hey mate when I tap the I in the settings it doesn't give me no option to turn of CarPlay
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
ErgG said:
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
Click to expand...
Click to collapse
have you tried searching in settings for android auto, then tinkering with those settings?
oh, i was assuming you have an android auto enabled car... do you?
Failing that, not ideal, but you could try an auto connect app...
see here
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
ErgG said:
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
Click to expand...
Click to collapse
What about using one of those auto connect apps I linked to.... So that when you're car is detected it auto connects and launches android auto...
Ohh yes, you have just reminded me....Any particular one you may like to recommend?
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Quote
reg66 said:
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Click to expand...
Click to collapse
Thank you Reg. I'll have a look at that link.
I had already deleted the other devices anyway.
FMMMG said:
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
Click to expand...
Click to collapse
Thank you for trying to help me. Unfortunately your solution did not work in my KIa Stonic.
I have PX6-HA5393-MAX10-CP updated with the VIVID10. Loving everything about that, however I purchased a Cobra SC201 dashcam with 5.0 Bluetooth and dual band 2.4ghz & 5 ghz wifi. My head unit cannot recognize either of the dashcam's Bluetooth or wifi networks to connect. The dash cam is visible and accessible with other devices such as phone and laptop. Only the head unit can't detect the dashcams wifi or Bluetooth networks to connect. The head unit is 2.4 ghz wifi only and the dash cam claims it's dual wifi (2.4/5.0 ghz). Both claim 5.0 Bluetooth. I have tried manually adding and connecting to dash cams wifi using different encryption keys with no success. Same issue before update to VIVID10 also.
LSmith3rd said:
I have PX6-HA5393-MAX10-CP updated with the VIVID10. Loving everything about that, however I purchased a Cobra SC201 dashcam with 5.0 Bluetooth and dual band 2.4ghz & 5 ghz wifi. My head unit cannot recognize either of the dashcam's Bluetooth or wifi networks to connect. The dash cam is visible and accessible with other devices such as phone and laptop. Only the head unit can't detect the dashcams wifi or Bluetooth networks to connect. The head unit is 2.4 ghz wifi only and the dash cam claims it's dual wifi (2.4/5.0 ghz). Both claim 5.0 Bluetooth. I have tried manually adding and connecting to dash cams wifi using different encryption keys with no success. Same issue before update to VIVID10 also.
Click to expand...
Click to collapse
- The Bluetooth is crippled and only works for phones and certain obd adapters
- The max10 can't do 5ghz... only 2.4
- The camera software will not do wifi cams.
Bob_Sanders said:
- The Bluetooth is crippled and only works for phones and certain obd adapters
- The max10 can't do 5ghz... only 2.4
- The camera software will not do wifi cams.
Click to expand...
Click to collapse
Bob,
Thanks for the follow up! Has anyone been able to successfully bypass the internal wifi/Bluetooth with USB wifi/Bluetooth adapter installs on these Android head units. I've read rumors of wifi bypass of others that know someone, but have yet to find any helpful links. Also not sure I follow regarding the camera software not doing wifi cams. Are you referring to Dasaita's DVR camera apps?
LSmith3rd said:
Are you referring to Dasaita's DVR camera apps?
Click to expand...
Click to collapse
As far as I know... yes. The app is trained to look for cams on usb and on the dedicated dvr cam plugin. I have not been able to get it to look elsewhere for cameras.
From what I understand, some people have had LIMITED success with usb bluetooth adapters. Some have managed to get them recognized, but then they operate in the same crippled fashion. The bluetooth regardless of what bluetooth system you use, will only recognize phones and some basic obd2 adapters and as far as I know, no one has been able to work around that.... and this is not just Dasaita... but pretty much all of them.
would rooting fix this limitation?
Bump - anyone out there was able to get Bluetooth for anything other than phones/OBD devices to work with any of these Android head units?
I have tried three off-the-shelf Bluetooth dongles and playing with the BT "drivers?" in the list for BT under Factory settings (i.e Head Unit > Settings > Car > Factory Settings > BT).
No luck!
shailentj said:
Bump - anyone out there was able to get Bluetooth for anything other than phones/OBD devices to work with any of these Android head units?
I have tried three off-the-shelf Bluetooth dongles and playing with the BT "drivers?" in the list for BT under Factory settings (i.e Head Unit > Settings > Car > Factory Settings > BT).
No luck!
Click to expand...
Click to collapse
No, you cannot. See above posts.
UIS7862 FYT based units work, including BLE.